Has anyone found a utility or a way to automatically dial numbers using a calling card? This is a rather convenient feature in my previous (non-WM5) cell phone that allowed me to import my corporate phone numbers and then use automatic calling card to dial them without editing hundreds of entries in the phone book.
I have noticed the "Callingcard" code sample at MSDN, however, there does not seem to be a compiled binary available anywhere and I do not have the development environment available.
Any help or tips appreciated.
Ihave been using this one
It is one of the importat things for me
so I use Program called "Long Distance Dialer (Pocket PC Phone) 1.3"
it works on WM2003, WM2003SE and I am runing it right now on WM2005
http://www.pocketgear.com/software_detail.asp?id=12595
good luck
DNO
Thanks! I did not realize it even runs on WM5. However, it does not see to go past dialing the access number - goes to reorder / busy tone right after. Is there a trick / fix to it?
I am using it on HTC Wizard
I never had that kind of problem
I don't know how to help you
This is my settings
Name: My card name
Acces#: my number (only numeric )
Dial Seq : PIN/Destination
Wait: 1Sec Pin : My pin
Wait 1 Sec Destination
then I go to Contacts I right click on the name I want to dial , it gives me optioon >> Dial using : then Name of my calling card .
When I click on that it gives me list of the phone numbers unther that name .
Since I call from USA I do need to select option << Add 011 before number >> but I do not do it because I added 011 to all phone numbers that I call with the card , in the Contacts
I hope this will help.
Good luck
DNO
I installed Long Distance Dialer 1.5 on my PPC. I like it so much that I want to register ($4.99). However 1.5 cannot be purchased anywhere anymore. Did anyone manage to purchase a registration key for 1.5? Or alternatively are 1.3 registration keys inter-changeable with 1.5?
This seems like a great piece of software, but it won't seem to accept pins less than 4 numbers. I have all my number listed with the country code first, so I need to add 00 to call them. In the past, I've configured my calling card feature to use 00 as the pin, which works great, but I can't get this to do it and I don't want to manually add 00 to all my numbers!
Many thanks for any help,
Paul
The link is to version 1.3. What you need is version 1.5. A quick Google will give you two or three sources.
1.5 has no limitations, but has an annoying trial notice pop-up each time you use it. Where can I purchase a registration key?
Thanks for the reply. I've downloaded v1.5, but it still won't let me enter a pin of less than 4 digits. Any thoughts?
Many thanks,
Paul
Solved the problem. In v1.5 you can put spaces as well, so, even though it needs at least 4 characters, I can put two spaces and then the two zeros.
Best,
P
Interesting - I was trying to solve my problem with the software dialing only the calling card access number. I defined an address book entry with the whole number with pauses - and still only the access number gets dialed. The card I use follows the "Number followed by PIN" model with a second dial tone after you dial the access number and a third one after the called number. Any ideas what could be causing the issue? Could it be that the Wizard does not recognize that the call has been completed after it dials the access number?
free and the best calling card dialing software
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
My email to the author (VSOFTCODE) of LDD bounced. Looks like I will have to remove it after the trial expires.
Edit: I just managed to purchase a licence through Handango after all.
----->chaniana
Thanks works fine!!
chaniana - BIG thanks - it works flowlessly.
Now - if I could only get it to dial the number before the PIN!
reg key
Well I know this is not a warez site but
would it be wrong if I give out the reg code ??
I think not ,because the software no longer supported by the developer.
what you think ???
One more thing !!
I have Version 1.3 which I bought from www.pockeatgear.com
where did you find v1.5 ???
Let me know
DNO
this is cool....
chaniana , i have been looking for something like this for a while... i have 2003 not 2005 to be able to complie or change this...
I am just migrating form treo 650 and am missing a program TakePhone. what it did it let me create rule
e.g. any number starting with a string it will use a calling card so i could set +44 use a calling card x
that way when i disl a number it will intercept the call an see the first few digits, if +44 it will dialthe calling card and wait for me to hit a button to enter a pin then eait for another button to dial the number, all in a few strokes i was dialing international and never had to change my contacts. when i was there in UK all i do is disabke the rule and voila i am in business...
see if u can do this
i did something similar in VS2003 creating from scratch an app that would list the contacts and i enter a ph and pin in 2 seperate textboxes and hit dial, got it to make a call to the 1800# but could not figure out how to dial the rest automatically so i am stuck
Long Distance Dialer 1.5 at handango.com.
Just pay the 5 bucks, it may inspire others to create affordable useful software!
This software doesn't work with PocketInformant. Any solution ?
I installed Long Distance Dialer 1.5 (Trial), entered Calling card (access#, PIN)
I can see new menu item when I right click "contact", but when I select "Dial CCard" NOTHING happe! No call started.
I'm using Wizard.
Hi
I am not able to see any context menu once I tried using by stylus
I am on WM6.1
Is it still usable
cheers
chaniana said:
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
Click to expand...
Click to collapse
HTC SPRINT 6900
after hardreset
what can be unlock code ?
before was 000000
Unlock code
for my phone the code is 195304
just go to the phone keypad type ##778# or ##3282#
select edit and when asked for the code type in 195304.
##778# and ##3282# will direct you to two different menus.
I have sprint. If this does not work for you just call your carrier and tell them that your internet is not working thats how I got mine.
sprint unlock
alphaxi3 said:
for my phone the code is 195304
just go to the phone keypad type ##778# or ##3282#
select edit and when asked for the code type in 195304.
##778# and ##3282# will direct you to two different menus.
I have sprint. If this does not work for you just call your carrier and tell them that your internet is not working thats how I got mine.
Click to expand...
Click to collapse
hye...do u have any idea how to unlock sprint sanyo vero?
i want use it by another telco..hope u can pm me
And how to make my white Vogue from inject to using RUIM card? Is that need unlock methods? But how? Can someone help me please? Hope you can PM me too, please?
alphaxi3 said:
for my phone the code is 195304
just go to the phone keypad type ##778# or ##3282#
select edit and when asked for the code type in 195304.
##778# and ##3282# will direct you to two different menus.
I have sprint. If this does not work for you just call your carrier and tell them that your internet is not working thats how I got mine.
Click to expand...
Click to collapse
On my phone Sprint Galaxy S 3 the ##3282# got me to the menu to select edit but the code "195304" doesn't work. After an "incorrect code" message the phone reboots.
This is the farthest I've gotten so far. I bought the phone off of eBay so I don't think I can call Sprint since I don't have an account with them.
How can I find out what the second number is for my phone??
found code for my s4 mini
jack.prieto said:
On my phone Sprint Galaxy S 3 the ##3282# got me to the menu to select edit but the code "195304" doesn't work. After an "incorrect code" message the phone reboots.
This is the farthest I've gotten so far. I bought the phone off of eBay so I don't think I can call Sprint since I don't have an account with them.
How can I find out what the second number is for my phone??
Click to expand...
Click to collapse
I have a sprint s4 mini and my code was 222222. You can Try that. If that don't work call sprint and ask for the six digit unlock code. I herd they don't like you asking for the MSL unlock code for some reason. If that don't work I've seen that you can down load (unlockmymsl) app from play store. Then try inputting 222222 once. And you will get incorrect code message. Hit your home key then go to the app and it should give you the code. Some Phone's need to be rooted but mine worked by just interning 222222 in the edit dialog.
The MSL/SPC code is not the same for every phone.
First I would try giving sprint a call and asking for It. Just be polite and clear about what you want. If it doesn't seem to be panning out, I wouldn't bother making too big a fuss and wasting time on it. I would just hang up and call right back to get another rep and try again.
Unfortunately my knowledge is based in Samsung devices, so I cannot say much for HTC. I do know that you could retrieve the MSL/SPC by using adb shell or similar to
Code:
su
getprop.RIL
after attempting to input an incorrect code (any 6 numbers will work). If you enter the wrong code twice, the phone will reboot (nothing more than an annoying security feature). On Samsung devices, recent firmware has broken this method, and flashing an older stock modem/rom was required to get it to work. Samsung Knox further complicated this by breaking compatibility with older modems, and causing a downgrade attempt to brick the device... At least you aren't in dealing with that mess. I have no idea about HTC phones, though.
unlock sprint phone
Hello, I have a Samsung Galaxy Mega I got with Sprint and I would like to use Straight Talk With It, All the unlocking company's are asking for a 15 digit IMEI #... Mine only has a 14 digit MEID #....How would i get the code for my phone? Thank you
Does anyone know the code to unlock an iPhone 5s
I have a lg stylo 5 with a sprint sim lock how can i unlock it for free
seemed to be locked down to hell. 6 digit SPC doesn't work, I think we need a 16 digit code, and as far as I can tell the Samsung 16 digit default one doesn't work (it will give a 'correct' message, but seems to restart phone right after).
I have activated my device and everything works fine xbox live, marketplace, zune etc.
The code doesn't seem to be tied to a handsets imei number. however Is it genereated uning information taken from your email address and phone number?
If not then can a single activation code be used to activate a second device where both could then be used to at the same time?
Seems to be working ok for me and my lad who also has a HD2.
Don't suppose you need someone else to test your theory and PM me your activation code
Pretty please
aenedor: Thanks for the info. So have you actvated both handsets using different email addresses but the same activation code?
mcvpjd3: Sorry I have a friend whose trying WP7 now - who may need the code if MS uk stall on issuing any new codes.....
I've had two android phones (charge and S4), and both have this problem. If a telephone bridgeline and access code are in the body of an email, it doesn't recognize the access code when you click it. If the same text is in a phonebook entry and you dial it from your phonebook, it will pause and ask if you want to dial the 2nd half of the number. Is this really broken, or am I using hte wrong numbers formats? I just do not understand how blackberry has gotten this right so long ago and android still has not...
None of the formats below will be recognized correctly on my S4 as a number with a pause, then dial the 2nd half when viewed in an email.
888-888-8888;111111#
888-888-8888x111111#
888-888-8888 111111#
888-888-8888p111111#
Phone: 1-888-888-8888
Access: 1111111
oddly commas do work, but the do not ask if you want to send the code, they do it automatically. The more commas the longer before they send the 2nd set of digits across.
bueler, bueler
anyone?