Broken screen - 8525, TyTN, MDA Vario II, JasJam General

Does anyone have a screen they took out of a device that is cracked or scratched baddly I could have? My screen has an annoying chip i'd like to see if I can fill with one of these windshield repair kits, but i'd rather not try it on my phone. I'd like to test it out first.

Just remember that the LCD has the digitizer above it. You may find using the windscreen repair kit may interfere with it, especially if its like a paste or something. The digitizer is stuck to the LCD with glue that might leave a small space between it & the LCD. If it is aciidently filled at a certain place you might find it has a part of the screen that is registering a tap.
Still only way to find out is to try but if I were you I'd get a replacement LCD (with Digitizer). They have been reported on ebay (states) for approx $25US.
Cheers...

Are you stalking me?
LOL, J/K.
Yeh i see what your saying and i thought about that. There is a kit that that i'm wanting to try is not a mix epoxy like most. It's thin like water and you have to let the sun cure it. It's crystal clear and i'm only looking to take a rough edge off a chip and one scratch that keeps catching my stylus. But then again if a dig is only $25USD on ebay it might not be worth the trouble. But then again i do like to tinker and if you don't try you can't find out right?

No worries, I'd probably get the spare 1st, then screw around. Gotta wait a couple of weeks to get the new LCD in if something went wrong but it would only take minutes to fix if you have the spare on hand.
Cheers...

I looked on ebay last night a new screen w/digi is $54USD. Half of what i paid for my phone on ebay. I'll proabably pass on this project for now at least. I know this is off topic but do you know if there's a VISTA compatible kitchen? I've flashed 6 diff roms over the last 2 weeks and i keep falling back on schaps. I'd like to try to decompile it though and take out some of the stuff i don't use to free up some memory. I posted a new thread in the upgrading forum asking this question, but since i already have your attention here and you seem pretty sharp i figured i'd ask.

FWIW,
I have a brand new (verified working) Hermes Screen (with digitizer) that I ended up not needing. I'll ship it standard USPS (with delivery confirmation) to anywhere in the US for $40.00.
First PM & payment gets it.

Related

Cost of Screen Replacement?

Hey fellas... I think this is my first post here. Been here so long I don't even remember.
Well I have a K-JAM... I made a mistake of not buying a screen protector at the shop. It's been about 3 months now and depite very careful usage, there are quite a few scratches on the screen. I was wondering how much it would cost to replace it.
Do I have to replace the entire screen or is there some kind of sheath over it that can be replaced hence minimizing the cost?
Any inputs would be appreciated.
Thanks
Do a search on Ebay, there's a few listed there. Seems that just the touchscreen (top part, the one you probably want) is around $35, touchscreen+LCD is around $130.
I did a screen replacement on my previous phone, a SonyEricsson P800. The replacement itself was fairly easy (I replaced both touchscreen+LCD since the LCD was busted), but the touchscreen and LCD on that one were glued together forming one solid piece. Although seperate touchscreens were available for the P800 as well, there would've been no way for me to seperate it from the LCD without breaking the latter. It might be the same case for the K-Jam, forcing you to opt for the more expensive option. You'll just have to check first.
Also, have a look at the Service manual for more information, also about (dis-)assembling the K-Jam.
Goodluck!
Depending upon the depth of scratch, have you tried a repair fluid and polisher?
There is a website in the UK www.mobilefun.co.uk that sell just a solution! No pun intended. For a few pounds it might be worth a try (or dollars depending on where you buy!)
Wow... thats fantastic... I hope it works... the Repair fluid that is.
@Juicey... I cheked it up.... but like most screens, this one seems to have the touchscreen sheath glued hard to it. So i guess that's out of the question.
@BMS_Ian... has anybody around here actually had any luck with these repair fluids?

[Q] I cracked my digitizer....hard to replace?

So I was pretty careless and dropped my N1 in work, landing perfectly on it's screen It still functions perfectly and the AMOLED screen hasn't been damaged, simply the digitizer. I've already ordered a new one with all the tools necessary to replace it, but I'm yet to find any definitive guide on replacing the N1 digitizer.
I came across thread #751923 (Can't post links as I'm new) which seems really helpful but a guide with pictures/video would be awesome. There's a 45 step youtube vid on how to replace it as well but the quality/clarity isn't great. I'm sure I can use both of these to replace it just fine, It just seems a little daunting.
Basically I'm looking for consolation along the lines of 'It's damn easy to fix' Any love for a fellow N1-er?
It is easy to fix. Two tips: don't use metal spatulas to pry the plastic under the battery off and gently wiggle and push the motherboard out only after disconnecting all the little connectors on it.
Im also waiting on my digitizer. I'm going to folllow these 2 guides.
http://www.ifixit.com/Teardown/Nexus-One-Teardown/1654/1
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
Have done it and you actually found better tear-downs and tutorials. Use youtube as well. The videos help because they show the techniques as well. Hardest part i would have to say is sliding the motherboard out the bottom under the metal separator. I think it was great and taught me a lot about my phone. The thing you have to watch out for is dust and fingerprints under the screen. Once it's on...it's on, anything underneath is stuck lol. make sure it's all clean and you won't have any annoyances like dust particles like i have.
I did it, mostly successful. I damaged the cable to the trackball, so be careful at that step, otherwise nothing difficult, just takes an hour or so.
Cheers for the info and advice guys, should hopefully get my replacement digitizer tomorrow so I'll keep this thread updated with the outcome
I have replaced my digitizer. It cost me $45.00. It was challenging but not impossible. The hardest thing is not tearing any of the ribbons when dissasembling. It was a successful replacement. The only gripe I had was the digitizer I bought did not come with the adhesive to glue the digitizer to the frame. Make sure you have a way to attach the screen to the frame before you begin the process. Other than that it should be easy as long as you take your time.
Sent from my Nexus One using XDA App
I replaced mine.. it took a solid hour or so, just be very careful not to tear any of the ribbon cables.. everything is super small and delicate.
I now get lots of dust in the corners of my screen because i didn't seal the new digitizer properly, but its not a huge deal to me.
replacing the digitizer is easy... its taking apart, and putting the rest back together that sucks. just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.
nexusonemeover said:
just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.
Click to expand...
Click to collapse
haha reminds me of when I took my laptop apart to re apply thermalpaste. I ended up with 7 extra screws >.< But the thing was together and has been running fine for the last 6 months so O.O
I did it, not too bad if you go slow and deliberately. I also have dust under my screen now. I sort of wish I would have just sent it to HTC but the money saved is worth a little dust.
A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .
rob61280 said:
A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .
Click to expand...
Click to collapse
That's a great idea, rob. I always think whenever I take apart a phone that I should have a video camera handy to record what I'm doing so I can play it in reverse when I'm putting it back together
For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.
Well I eventually got my digitizer this morning. It took until I had everything taken apart to realise they had sent me a compatible but ill fitting digitizer. It doesn't even have the appropriate buttons (it did in the selling image) at the bottom. At this point everything works fine but it doesn't look perfect. I guess it'll have to do, thanks for the advice guys
omgdwong said:
For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.
Click to expand...
Click to collapse
Wow thats cheap, I just got quoted for around $300US to fix my phones screen.. not including labor.. argh
Does anyone know if HTC in america repair phones from the other side of the world even though they were purchased from google's store?
I just sent my phone into HTC to be repaired for a cracked screen expecting it to be $115 and was pleasantly surprised to find that it would only be $55 including shipping! HTC was also extremely quick to get back with me for the quote. I sent the phone out Tuesday at 4pm and they have looked at it and quoted me the repair cost by Wednesday at 2 pm.
I recently cracked my digitalizer as well.
I called HTC 2 times without giving any information about myself before calling a 3rd time to do the actual swap.
I was quoted at $115 for me to send in my N1, wait a week without a phone, and have them replace the digitalizer, before shipping it back.
I then further inquired and found out they have a Swap program where they mail you a new(refurbished, but perfect) phone, and a FedEx label, which they still quoted me $115 to fix the screen, and a possible $275 if they needed to replace the logicboard, but they would get a quote back to me with all the things they would need to replace. It would require a $529 charge to my card, incase i didnt send the phone back at all.
I mentioned that my camera was broken, as well as my trackball was loose, and he said the quote would include this as well.
I called back a 3rd time, requested a swap phone, and had one 2 days later.
i mailed my phone into HTC, and two days later i had my quote.
I paid $55 after it was said and done, and have a new (refurbished) phone
I was rooted,unlocked, and running Kang-O-Rama 1.0 when i shipped the phone in. I didnt bother to fix that.

[Q] Display repair: What should I do?

Hi
Ok,my HD2 is broken since October and I'm a student and i just couldn't afford the repairs. All I know is that - it seems like this - the connector to the display is not working anymore (common problem I heard).
But honestly I have no idea what to do:
Money is still a bit tight so I can't really buy a new phone.
On the other I couldn't even figure out what to repair. I know the display is a whole unit (LCD and touchscreen glued together) and somewhere in between is the connector,which lost his contact to the mainplatine.
But all I find are the plastic frames with a connector ( http://www.algogo.com/store/product...er-HTC-HD2-II-LEO-T8585-.html?setCurrencyId=2 ) [I have no idea what digitizer means..i always thought it's the same as the touchscreen itself but that's not true.]
Or I find things like this LCD+Touchscreen or even cheaper this .
I know I need the big connector cable as mentioned in the first link of the digitizer offer but here the connector cable is suddenly on the side and not down to the keys...
Well,but it's the whole display package so I guess I need this...
I already have the right screwdriver for this work but I'm still not sure what to do/if it worth it.
Ok,the 70 Euro plus shipping..that's cheap but on the other hand the HD2 is already a bit old (but I still love Windows mobile and what do keep that).
So..any clues..suggestions?
my suggestion is to go for.. buy any LCD+Digitizer pre-assembly pack, check this videos link
and try by your self..
also many informations about the procedure you will find here link2
or here link3
take your time and you will be successful repair it at your own..
Thanks your these links but the thing is..I already know them and tried it as far as I could (which is why I already have the right screw driver for it). In the end I just scratched it more and more...
The thing is..I'm not really good at this - especially the display removing and heating part of the job. So I thought I could bypass that by simply replacing the whole display unit. Ok,still 70 Euro if I chose the second ebay link but that's way cheaper than the other ebay offer plus really really cheap compared to these send-in repair shops from the internet (about 200 euro then).
I'm just not sure if these are the right components or if there is a cheaper offer somewhere else.
I bought my LCD+Digitizer for 55USD with the shipping costs, from ebay.com.
It was from a China seller, not an OEM item for sure, but after all, my LCD was as a new one!!!
I also needed an adhesive tape like this one.
you should remember that you will need to detach the LCD+Digi from the middle metal plate frame bezel
and the only way is with heat. I tried with a hair drier..
And all went as is should be..
I'm sorry to dig this thread up but I just found my old HD2 and wondered if I could get it back to work.
Of course I need a new battery and stuff but actually it's still ok.
The concerning part is the glued display and the heat you need but now the HD2 gets older and the prizes drop so I saw a complete display (the glass, the screen and the touchpad-layer) on amazon for 60 euro.
Would you go for it?
I'm not quiet sure how to disamble the device but there are videos for that. And then it should work, right? There is no glue or duct tape or anything involved if I swap the whole display-component, right?
Raizm said:
I'm sorry to dig this thread up but I just found my old HD2 and wondered if I could get it back to work.
Of course I need a new battery and stuff but actually it's still ok.
The concerning part is the glued display and the heat you need but now the HD2 gets older and the prizes drop so I saw a complete display (the glass, the screen and the touchpad-layer) on amazon for 60 euro.
Would you go for it?
I'm not quiet sure how to disamble the device but there are videos for that. And then it should work, right? There is no glue or duct tape or anything involved if I swap the whole display-component, right?
Click to expand...
Click to collapse
From the research I've done you'll need either super glue or 3m double sided tape.
Sent from my NexusHD2 using xda premium

Broken S4, is it worth anything to keep/sell? What to do if selling?

Greetings,
My S4 screen cracked a few weeks ago. I'm pretty handy at fixing just about anything, but this time I've failed. I was going to replace the screen tonight, however unlike the many videos, when I heated up my phone and started to lift up to remove the adhesive, the cracked screen shattered like safety/tinted glass. The glass was finally off, however I suppose I truly didn't heat it enough, as there was a lot of adhesive residue behind. I was slowly cleaning it up, and suppose I pressed too hard on the digitizer, that the bottom left corner has display issues now, with a very faint line running left to right around the problem area.
So, here I sit with a new glass, optically clear adhesive, uv lamp, and a broken S4 Just picked it up about 2 months ago, but lesson learned (buy a heat gun and a temp gun if i ever need to do this again).
I'm ready to move on with life and get a new phone. Since I'm mere months in to my contract, I'll be shopping for a new phone on my own online. Might get another S4, might get a Note 3.
I'll take any constructive advice folks have to offer. Is the phone worth anything to anyone as it sits? I see a bunch of broken phones on ebay selling for insane prices (150+) with broken digitizers. I suppose my phone, given it's only the digitizer (and now missing glass) that's broken and the actual electronics are working might be useful as a parts phone to fix someones water/short circuited phone? If I were to post the phone and all accessories on ebay, how would the sale work as far as the phone being linked to me or my tmobile account? I'd keep the SIM of course, and the IMEI is good since it's actually my phone, is the proper thing to do to simply sell it, let someone else stick in their SIM and move on with life, or are there risks I need to be concerned with when handing my phone off to someone else, might they cause me some annoyances some how if i dont safeguard myself?
Thoughts? Or, even thoughts about what to get next?
After looking at prices for new S4s or a Note 3, maybe the best bet is to replace the digitizer, it looks like a new digitizer and glass is $200. that might be the way to go
I would agree, if you are able to replace both parts it will work out much cheaper. Looking at it on the brighter side, once the digitizer is broken replacing it and the screen is much much easier.
id4rox said:
After looking at prices for new S4s or a Note 3, maybe the best bet is to replace the digitizer, it looks like a new digitizer and glass is $200. that might be the way to go
Click to expand...
Click to collapse
Definitely just replace the whole screen. Also look if any of the official samsung repair shops near you have any discounts; I got my S3 screen replaced for around 80€ (been more careful with my S4).
Thanks folks. I have a new digitizer setup on the way ($200 shipped on ebay), will be black (front) on white (back) once installed! I feared for the worst at the point of breakage, now looking back a $200 repair doesn't seem that bad! Appreciate the responses!
U could try a store like the one I use it's in the UK but maybe of some help ?
http://www.parts4repair.com/
Sent from my viperone
---------- Post added at 07:58 AM ---------- Previous post was at 07:55 AM ----------
Samsung s4 repair parts page http://www.parts4repair.com/samsung-i9500-galaxy-s4/
Sent from my HTC One using xda app-developers app
Bought a new digitizer on ebay for $200 thursday morning and had it installed saturday. very simple process (thanks to some youtube videos showing how it's done)
well that s some good news congrats

Another screen broken advice needed

Hello all,
I bought a Galaxy S4 for my partner, and stupidly didn't get it insured.
The screen got cracked quite badly, so fr £120 a local lad put a new screen on. Later that week it got dropped onto mud on the way to nursery and smashed entirely.
I now have a predicament, either give up the phone and go back to my sluggish s3, or ask you guys this question:
Where is the best and most value for money place to get a smashed screen fixed (you can't see anything just a rim of light) somewhere reputable that will use genuine parts and guarantee their work? I really don't want to just leave it on the shelf and am worried that without good advice I will end up with another shabby repair.
Your input would be greatly appreciated.
Many thanks and Happy Christmas,
Ric
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
knuckles1978 said:
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
Click to expand...
Click to collapse
ha, the first time the phone broke, my misses threw it against a metal door obliterating the top and matrix thingy so an extensive repair was required. I'm well aware of the £5 DIY jobby hairdryer thing but this second breaking is again both screens, and I don't want a shabby repair I want the original screen part so that it is as strong as it can possibly be. I paid this guy £120, but the screen was so weak it broke dropping on mud! SO I still need to know, where can I get it fixed with genuine Samsung parts? Samsung only? Are the any reputable companies members would use to have their £500 phones repaired?
Thanks to the guy that replied I can't see your name now I'm replying somehow...
In pretty sure there aren't any fake AMOLED screens, not like phones that use LCD - there are hundreds of fake LCD's for those phones. But there are fake front glass panels.
If I wanted to make sure that genuine parts were used I'd order the screen assembly up from eBay myself. You can order it up as a complete front assembly from eBay, and it's a very easy job to change the whole thing over yourself, if you're reasonably confident about tackling things like that. Just make sure it's described as 'Genuine Samsung', and not 'Samsung panel genuine for i9505' or suchlike. If it's described as 'Genuine Samsung', then you have comeback of its not.
I've fixed a good few phones though, and all the times I've ordered parts as I've described above, it has been the real deal. It's pretty easy to tell the fake front glass panels.
Changing the front glass only with hairdryer etc is a sh!tty job, but changing a whole front panel which has the chrome effect plastic trim piece, AMOLED, touch sensor, and front glass already assembled is a piece of p!ss...
I would totally recommend just getting it fixed... plenty of tutorials online to follow. Watch a few of them and see if it is something you are comfortable doing yourself. I've done it and found it to be quite simple. But, it all depends on your comfort level with repairing things...
I think getting it fixed is the idea, yes lol
I was saying though that since it's the whole thing that is broken and needs changed, and not just the front glass, the job is much easier. It's just a case of taking a few screws out and swapping the whole front assembly. On a difficulty rating out of 10 I give it a 4
If you watch a couple of videos on YouTube first, and you take it nice and carefully, I'd say this is a job that most people could handle.

Categories

Resources