I'm running Gyrator 2, and everything seems to be working well, except that when I try to type in landscape mode, pressing the comma key gives a full stop, and vice versa! This doesn't happen with Opera, which is excluded from rotating in Gyrator, so I'm assuming it's some issue with that. Anyone else had this problem?
with gsen i dont have a problem.. maybe someone that uses gyrator test this?
*bump* Anyone have any idea what this might be?
Hi, am running gurator2 also, but no problems here.
landscape, word/sms and typing comma (,,,) no problems.
v 2008.10.20.1
Hi,
I posted some information on this in the FAQ from an old thread here - I think it's locale specific
http://wiki.xda-developers.com/index.php?pagename=BlackstoneFAQ#WM61
Thanks for the link, at least I know it's not just me! None of the other threads came up with a solution though...
I have this too however i'm used to having the wrong keys in the wrong place as i'm too lazy to change my regional settings in windoze (hangs head in shame)
read somewhere it had something to do with T9. try to switch it of in landscape and see if it helps.
Related
with my german MDA Pro I experience a very annoying behavior of the software keybord (the one displayed on the screen). Whenver I focus an textfield (i.e. pocketIE adressbar, or when renaming a file in total commander etc.) that software keyboard pops up. Now as long as I am in portrait mode that MIGHT be a helpful feature. But when I am in landscape mode and I have the hardwarekeyboard available this is useless and annoying. So is there a way to surpress this? I seems that this popup does nto happen always. Sometimes it does, sometimes it doesn't - I just was not able to find out what it depends on.
Same Prob too.
It sucks !
Someone can help ?
PHM PowerToys has an "Extended Keyboard SIP" bundled in with all its other goodies. No keyboard pops up when you select that as your default input method.
I found a "ripped" version of just the keyboard SIP without having to install all the other stuff.
http://www.freewareppc.com/utilities/phmpocketpcpowertoys.shtml (watch for popups)
http://www.beyondthetech.com/downloads/phone/PHMPPCPT.Rpr_ARM_SIPonly.CAB
Let me know if this works for you.
what does this keyboard tool actually do? does it just set some registry setting ? can I uninstall it after I have run it ? Or must this App raun ALL THE TIME to make it work ? (the latter would suck since eats ressources)
It just add another SIP into your other one
But this time, it will show nothing so you can use your keyboard freely
And no, it should not take up any resource, if any, it will be very very very little
Fear not chaps, I posted about this and just use the hard keyboard and it 'learns' not to pop up in landscape mode.
Hope it helps
it does learn, but i think it learned by selecting an alternative input as the default.
ok. I know I saw someone mention on this forum that there is a cab you can install for a larger on-screen keyboard. I've been searching the forums, but can not find this cab. I hate typing with my stylus, and with tf2d installed I rarely flip open my phone anymore (landscape is still not fully supported).
anyone know where I can get a hold of the large on-screen keyboard? An attachment or a forum link would be ideal.
thanks again!!! =)
I'd definately be interested in this too...
try this thread -
http://forum.xda-developers.com/showthread.php?t=431683
=(
thanks so much for the help! I reviewed all of these keyboard and decided that I like the HTC touch keyboard the best..... Only problem is. I install the cab, and it does NOTHING! It still has the same old crappy on-screen keyboard! (stylus required)
I am using ttran's OTP 7 (tf2d manila)
I am uploading the cab now, so anyone else who has time.... test this and let me know if I am the only one with this problem... and if you know a solution please post.
Thanks again!
- Dave
You have to touch & hold the little arrow by the keyboard to select the new one. You'll have to do this every time you reset your phone, but the attached cab will fix that. Just install it & you'll see it in your programs list. This will allow you to set the default keyboard so it doesn't reset each time you power up your phone.
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me
Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?
cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse
Hi all,
I'm having a problem with the HTC SIPs (Full Qwerty and Compact Qwerty) - they're both stuck on numeric input and won't switch back to text input mode.
ie, I click on the "ABC" button and nothing happens. I therefore can't enter anything other than numbers and symbols!
Has anyone else seen this issue? I'm having to use PCM Keyboard in the meantime, which is frustrating as it doesn't have easy access to "." etc.
Thanks
J
PCM Keyboard prevents the HTC SIPs from working properly. Either remove PCK Keyboard or try the latest version (0.19)
I have the same problem
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Petee said:
I have the same problem.
I haven't installed any additional keyboard software, and suddenly my text keyboard is stuck on numerics.
I have a feeling this may have been something to do with the latest firmware from HTC that I've recently installed.
Anyone got any ideas?
Thanks in advance
Pete
Click to expand...
Click to collapse
Do you have HD Tweak installed?
this will happen if you enable T9
Sorted
Yep, that was it
Sorted - Thankyouverymuchsir
okay so I too now have this same problem, originally I had Dutty's Leo R6 on my phone with HDTweak so I decided to reflash my phone with Dutty's Leo R7 and this time not install HDTweak and see if it works.... But even after doing that, I still keep getting all 3 types of the keyboard inputs stuck on numbers and symbols. after a soft reset whenever I try and type in a text, the first time it usually works fine. But after I have sent the 1st message or just returned to the home tab and try to write another msg, all input keyboards are stuck. Note: I can temporarily fix it by clicking on a previous message, waiting for the menu to popup from the threaded view and then closing it, but after writing that message it will revert back to being stuck
So no HDTweak installed, using new HTC Messaging App, have turned off T9 Autocompletion + Symbol Lock under Input Options and I have also tried installing geniusgeng's cab here: http://forum.xda-developers.com/showthread.php?t=486187&highlight=[solution]+qwerty+keyboard but that doesn't work...any thoughts on how I can fix this with something more permanent?
Thanks
Not sure of any reg tweaks, but why don't you install HD Tweak and then disable T9
Hey, thanks for the amazingly fast reply!!!
okay so I just tried reinstalling HDTweak again and disabling T9, but its still not working I keep having the same trouble. I have also tried all different combinations of disabling T9 only in HDTweak, or both HDTweak and under Input Options and only in Input Options and so on.... but the problem doesn't seem to get resolved.
I have experimented some more and it turns out that the keyboard will only get stuck when I go to the messages tab and click on a text I received to reply to it. If i go to the messages tab and create a new message (where I have to enter in the contact and can't see the threaded msgs) then the keyboard is fine all the time. Does anyone else have this same problem as well, or is it just me?
I would really prefer to be able to quickly reply to texts instead of creating new messages every time...gonna try disabling the htc messaging app (was going to anyway cause it takes waaaay too loooong lol) and see if that magically works
Thanks again!
I had a similar problem and fixed it
I logged on here to see if someone could tell me how to fix my issue, but it is regarding an HTC HD2, not a Blackberry. My problem was similar but not exactly the same. My phone somehow permanently got stuck on Xt9, which I hate and am worthless at using. I couldn't seem to find the answer anywhere online so i'm writing my experience here in case it helps anyone.
Hitting the XT9 / ABC button did NOTHING to fix it. Even though the button would visually change from XT9 to ABC and back, when I hit it (it would change to a green color), the keys themselves would not change at all, and i was stuck looking at keys that make zero sense to me qw... er...ty... ui.... it was like a bad nightmare. I have no idea how I managed to get it stuck on this (sorry I know most of you techies probably have no problem with it but I am just not very tech savvy).
I tried taking out my battery, popping the sim card in and out several times, restarting. Sounds stupid but I didn't know what else to do as I couldn't find any solutions online. Finally called tmobile.
First the rep told me to try going to Settings > Locale and Text > Text Input. She asked what my settings were on, I said ABC. She told me to turn it to XT9 instead, then close out the screen, go back, then switch back to ABC. I did that, and no dice. I figured either the settings are frozen or I'm cursed.
Then she had me go to the screen to write a text msg. When your cursor is in the text box to write in, you will see a little keyboard icon at the bottom of the screen. There's a little arrow next to it. Click on that arrow. That brought up the options of Full QWERTY and Compact QWERTY, and apparently somehow my phone got switched to Compact QWERTY. So I switched back, and that fixed it.
So yeah, apparently there are a couple of different ways to change it.
I wanted to hug this woman through the phone, i was so relieved to be able to text again (I could not write out one single word while on Compact QWERTY). I'm not sure if going this route can help anyone else but it was the answer for me. There may be other options for you when you click on the arrow next to the keyboard.
Good luck!
hello , i have the following problem
when I click in url or in edit fields on my opera , my onscreen keyboard popups automaticaly and i cant go on writing with the normal keyboard
can i turn this off ?
need help
Hey, i've got the same problem. I'm running Touch IT 4.5 from itje. Somebody got a solution for this?
Same "problem" here, though I can always write on the hardware keyboard no matter if SIP is deployed or not. What I do is pressing the Symbolpad-Key on the Hardwarekeyboard once (If Smybolpad is being displayed) or twice( If other input method is activated). That makes it disappear and I can go on typing. It is furthermore possible to disabled auto-deploy with Advanced Config, but NOT FOR OPERA, I found. How do you do this?
i havn´t the problem anymore , i´ve only downloaded the opera version from itje [Opera 15969] http://forum.xda-developers.com/showthread.php?t=485624
, it works and the browser looks better