Hi
When playing the tf3d music player and using the bundled headphones, the volyme is way to high for my taste. Hitting the volyme rocker wont help cause its at the very bottom in system-tab.
Is there an other place where I can tweak this setting?
robnil said:
Hi
When playing the tf3d music player and using the bundled headphones, the volyme is way to high for my taste. Hitting the volyme rocker wont help cause its at the very bottom in system-tab.
Is there an other place where I can tweak this setting?
Click to expand...
Click to collapse
I think if you use a program called Advanced Config Tool 3.3 there is the option to change the maximum music volume. Default is 100. You can lower it to what you like but then you have the problem where system sounds and ringtones may be too quiet.
pulled it down from 100 to 20
Seem to work! Thank you!
And the ring phone its equal?
Related
I am looking for a way to set independently the
pda sound: like for notifications & alerts
phone sound: what you hear wen IN a call
ringer sound: what you hear when you are called, before you pick up
I noticed phone & ringer share the same setting: So whenever I set the phone sound louder (because i am in a loud environment), the earth begins to shake when I receive the next call.
Any help / suggestions :?:
pda sound: System events can be turned on/off with a tick at Settings>Sounds & Notifications>Volume , but the slider affects all system.
phone sound actually is the system sound.
ringer sound: it should be possible to set it separately in WM2003 - I know nothing about it (still PPC2002PE - xda-developers Special Edition ROM v1.2)
By the way, you can adjust the ringer volume in the entire .WAV file with SoundForge or something like that. And then - volume up!
I figured out to change the volume of the wav / mid.
But still: It should be possible to have the three different volumes set separately.
In WM2003 there are 2 volume sliders: system (notifications & more) and phone (phone & ringer)
Have you seen the Freeware called PocketZenPhone, just follow the thread on this forum. It does what you are looking for plus more. Hope this is what you mean otherwise sorry.
I tried PocketZenPhone.
To me it introduces easy acces to preset profiles very neatly.
But I did not notice that I could set different volumes for phone sound & ringer . . . .
Maybe I have to give it another try.
edsub said:
I tried PocketZenPhone.
To me it introduces easy acces to preset profiles very neatly.
But I did not notice that I could set different volumes for phone sound & ringer . . . .
Maybe I have to give it another try.
Click to expand...
Click to collapse
Yes it does, but it is only since the past few pages that this was implemented and works great.
Maybe it's just me but the sound when i change the volume of the diamond freaks me out... especially when i'm listening music with earplugs and i just wanna do it a little more louder it disturbs me.
Is there a way to make them go away? Maybe just erase the soundfiles? If yes, can somebody please tell me where i can find them?
pls help me
You can disable the 'sound beeps while changing volume' by using Diamond Tweak.
Thanks a lot for helping me fixing my problem...
I installed diamond tweak already but i did not find a tweak for fixing my prob.
I have Installed the 0.5 version is there a newer one? I couldn't find one in the internet so far...
Tweak # 1.5 in Diamond Tweak.
But it is only for in call beeps as the description says. Still you can try it. Sorry if it doesnt help.
still have this issue on Wm6.5 energyrom phoenix 2
I cannot disable the volume change sound.
Tried looking for wav files, tried using advancedtweak (And other tweak programs).
I can only get them to shut off when in a call. I want them to be disabled forever. Any solution ideas
Same here. I have looked in the registry and I can't find anything about the volume beep not incall.
i was looking for the same thing and the only solution i found was to install another volume control app
S2U2 includes a silent volume control that works perfectly
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
le_cactus said:
Hi,
When browsing the HD2 forums (I'm gonna get one in a few days, yay!) I found this:
75. Disable Beeps When Altering Volume
When you press the volume key you getting annoying beeps. This tweak allows to change the volume silently without the beeps.
HKCU\ControlPanel\Volume\Mute Change from 3 to 1.
It worked on my TP so I assume it'll work on you Diamond to.
Cheers,
/Cacti
Click to expand...
Click to collapse
Just tested on Topaz and it works like a charm
So simple
Cheers for that mate
Take care
actually tested it and it's wrong
what it does is disables events, reminders and sets notifications to silent
maybe it works on Leo but not on Topaz
Hi,
on my HTC TD I can choose with the touchflo 3d the sound profile settings. When I choose for example the "Normal" profile, the ringtone loudness goes on 80%.
Is it possible to change the default loudness of the "Normal" profile to example 90%?
Thanks for your help!
Best regards,
Double-You
2
I second this request. It would also be nice to add more sound profiles like work, car, night and so on. Kind of like phonealarm, but to work right with the touchflo 3d.
Is there a program or something that will allow progressively increasing volume on my xv6900? My wife has a centro and her ringtones go from soft to very loud. I'd like something like that on my phone. I have my ringtone set to an mp3 and I have it set to "increasing ring" but it doesn't seem to get louder. Any suggestions would be appreciated! Thanks.
Hey, not sure if this will be the same on your Vzn phone but I have a Sprint Vogue and here is what I do:
Goto Settings, Sounds & Notifications, Notification Tabs.
In the "Event:" drop-down box at the top, chose "Phone: Incoming call"
Beneath it is "Ring type" drop-down box, chose "Increasing Ring"
Here is the only part that may not be exactly like the centro: The Vogue plays the entire mp3 track at a low volume, then a second time at a medium volume, then a third time at the highest volume. If your mp3 file is long, it may not even get to the 2nd or 3rd time since your phone would go to voice mail. So, this standard method in the Vogue phone is most effective for mp3 files with a duration of 3-5 seconds.
Hope this helps some.
Program to do it?
That is what I figured... that it actually has to cycle. Is there a ringtone manager or something like that for windows mobile that will handle it better and actually increase the volume of a single file, without cycling?
i dont have a solution for the repeating the single file, but i have attached a program that HTC made for the diamond and somebody ported to QVGA
it allows you to cut down mp3's into shorter segments instead of playing the whole song
I'm still trying to find a way to have custom ringtones that neither adds a long delay before it begins playing (.mp3) nor completely brings the phone down to its knees and seems to spike the CPU usage to 100% while playing (.wav audio).
My ultimate goal: Machinae Supremacy's remake of the Giana Sisters theme song, from 3:01 to 3:30 -- http://www.youtube.com/watch?v=XKkmyMKbPKE
i cant say i had the problem when i was using the mp3 trimmer, i never looked into my cpu usage but i never had a slow down because of a call
ok...Installed WP7 + Magldr 1.12 and works perfect. Very Loudest Ringtone and Systemtone without Earphone.
Activate works perfect. Thx Microsoft German Support!
But i want use my InEarphones and listen Music and now its to low...!
I found the Registry Entrys but how make the Volume for Music higher? What is the right Entry for this? Anybody helps?
I need music music volume higher...
Thx DarkForcesTeam for this work...
It's completed mess with volumes.
1) Media & ring volume are too LOUD
2) System notifications with same level like 1) are too LOW
Just use the rocker switches to adjust volume level
stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
What is this?
stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
Whut?
Rocker Switches?
Wrong forum, ffs why are people still posting crap in the dev sections??
Thread reported!
Mine is stupidly loud on ringtones and media etc (to distortion), and it's also too loud through headphones.
When I say this I mean that the loudest setting is over the top and not much use since it's distorted - that's fine, I just won't turn it up that high - simples!
But the problem is that on the lowest setting (1/20) both ringtones and media are still too loud for what should be kind of barely audible. Now that is not easy to workaround so I'd love to sort it out.
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
If you happen to find that thread again please post it here as I would really appreciate it.
Kenichi
i did the registry edit too but speakers sound awful still when i want to turn it up a bit to listen to music or videos.... very annoying
Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Heimiko said:
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Click to expand...
Click to collapse
any way of entering this in the phone ?
as a regeditor or something ?
Confirm this works a treat, here is the reg editor
THUDUK said:
Confirm this works a treat, here is the reg editor
Click to expand...
Click to collapse
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Heimiko said:
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Click to expand...
Click to collapse
I think I just fixed this. I saw a registry edit for WM 6 & it the directory still exists.
HKCU\ControlPanel\SoundCategories\
In each of it's sub directories, change the InitVol value to 100. I notice some were 100 already while others were 85 or even 65. I think this means 100% volume/85% volume/65% volume. Change them all to one value & you'll equalize the volume across the board.