Database Users

08 Altima Bluetooth

We just bought an '08 Altima with the bluetooth option. I can pair the XV6800 with no problem, but quality sucks. It is super choppy on my end and the person on the other end can't hear me at all. I tried my wifes XV6800, same thing. I can pair my old E815 and it works perfectly, so it's not the car. I tried a hard reset, no difference.
I tried loading dcd's clean rom 1.6.7, no difference. Is the BT stack upgraded in this rom?
Is there a newer BT stack out there that I could try?

Its worth downloading and trying the Jetware BT Extensions and see if that helps....but usually it does not change quality so much as enable functionality.
http://www.jetwaremobile.com/
Brad

Thanks for the suggestion, but it didn't help.

Developer help with Infiniti/Nissan Bluetooth?
I've got the exact same issue with an '07 Infiniti G35 w/navigation. I've been doing lots of reading on the xv6800's bluetooth, have tried DCD's and Custel's roms, and was just about to start my own thread, but I'll bet our cars are the same bluetooth/rom wise.
Jetware didn't help me either.
Here's the best fix I've found and it works for me consistently.
-Whence the option's available depending on whether you're dialing out or receiving, click the "use handset" button (transfers call to the xv6800).
-Shortly after press the "phone" button (transfers call back through car).
-Should work as expected after that.
Anyway, at this point I'm hoping one of the kind devs on this forum (DCD or Custel to name just two of many) might find a sec to help us out, although I'm aware and appreciate the fact that many other users are keeping them very busy on their own projects.
I'm assuming the xv6800's hardware would be most similar to other HTC pda phones (not sure what happens between GSM and CDMA devices), so here's a list of their phones who's bluetooth does work with my car (from here). It supports the bluetooth in 144 phones total.
Kaiser (wasn't working with stock rom, but works after this patch from HTC)
Hermes
Atlas
Wizard
Apache
Magician
Harrier
HTC pda phones that don't work with my car (at least not 100%).
Vogue
Elf
Titan
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
In addition to the stock Verizon rom I've tried DCD's 1.6.1, 1.6.7, and Custel's 1.1 with no change in the symptoms.
It's my understanding the dev community thinks modding the Vogue's bluetooth for the Titan shows the most promise. I found this thread mentioning an alternative, but it seems to have gone stale on another forum. I'd prefer not to use that forum.
I understand the Vogue's bluetooth might show the most promise for general bluetooth applications (which would satisfy the most users), but becuase I plan to use bluetooth solely through this car, does anyone know if I might be able to go an easier route given the information I've provided?
I'm using radio 1.40.00, could 1.47.01 make a difference?
Can anything be learned through HTC's Kaiser update patch?
Are there any bluetooth alternatives being tested that I haven't found?
Thanks for any help anyone can provide.

OK. I tried what you said and confirm the same results on the '08 Altima. If I switch to handset and back to Bluetooth, the sound is clear (weird). The only problem is, I can't switch until a call is in progress. This is a work around, but not a good one. We need a BT stack that fixes this. Or maybe firmware upgrade from the auto manufacturer.

I know this is going to sounds like a cheap shot, but it sounds to me like something needs to be fixed on Nissan's side. I've tried mine in an Accura without any problem, however both of your stereos are manufactured by Nissan.
A word of advice: I always found that auto makers should stick to what they do- namely, make cars. If Nissan were so great at BT stereos, you'd see nissan headsets.
I never bother with factory Bluetooth anymore- I swapped my stereo right away for a decent Sony Xplod system that supports A2DP (wireless stereo) as well as phone calls. The aftermarket stereo not only sounds great, but I play all my music from my phone without taking it out of my pocket. Last I checked, no stock car stereos supported this. Sony is good at stereo and bluetooth (been around the block a few times).
Complain to Nissan. Or swap your stereo for something decent.

My Sprint 6700 with BigJ Rom works great with the 08 Altima. In the fact the audio quality is better than the Sanyo Katana that I also have paired. I am dispointed that I cannt answer calls from both phones on the car headset without first selecting the phone that has an incoming call. Even my At&T home phone with bluetooth can do that although it does require you to select a cellphone for outgoing calls.
I was able to upload a contact entry from my 6700 to the car Download phonebook. However, I can not get that into the more usable phonebook directory. Anyone succeed in doing that?

shannl said:
My Sprint 6700 with BigJ Rom works great with the 08 Altima.
Click to expand...
Click to collapse
You might be in the wrong forum. The Titan is a 6800, not a 6700.

yes, but this thread is discussing the Altima BT stereo. Truthfully, this whole thread should go in a more general BT forum, since I don't think it pertains to the 6800 exactly.

08 altima bluetooth
Just wanted to say thanks to Park City for posting the name of the web site with the bluetooth extentions (jetwaremobile.com). I have just recently purchased an 08 Altima with the Nav system and bluetooth. I have an Tmobile MDA with a cooked ROM running WM6 and I could not get the entire outlook phone book to download to the car. Once I installed the jetware mobile extentions everything worked just fine. I even got some additional functionality I was not expecting like signal strengh and battery status on the nav srceen. As for voice quality, it's never been an issue for me. So far anyway

As I can see, they are currently testing the Mogul with both of your cars. I don't know what they mean by 'testing', but that's what is going on right now.
http://www.nissanusa.com/bluetooth/...gation+System&mfg=All+Manufacturers&x=51&y=16
http://www.infiniti.com/bluetooth/t...igation+System&mfg=All+Manufacturers&x=42&y=9

arcanecho said:
As I can see, they are currently testing the Mogul with both of your cars.
Click to expand...
Click to collapse
I saw that too, but I don't have a lot of confidence they'll be releasing a bluetooth update any time soon. That's why I was hoping the Titan's bluetooth hardware might be similar enough to the hardware in one of the devices that DO work with our cars (Kaiser, etc., list in my earlier post) that their bluetooth software could be ported "easily" to the Titan. I'm sure the devs here are trying to get the Titan's bluetooth to work as well as possible for everyone's devices, which makes sense. However, with California's new "handsfree driving" law starting July '08, I'm only concerned with getting the Titan to work with my car.
Apparently no one's too sure if that's possible.

1. have any of you verified first hand that the kaiser does in fact work?
2. could someone research and identify the bt hardware in the kaiser, and the titan?
3. has anyone run the kaiser bt fix on their titan and tried it?
i suppose i never thought to look at the kaiser's bt. mine still functions after applying that kaiser patch..
the kaiser patch is a replacement TIInit_4_2_38.bts file
this file did not exist in any titan roms prior to 2.16
2.16 introduced this file (i compared md5 and its not the same data)
2.17, htcs supposed 'fix', does NOT contain this file
all vogue roms i have seen DO contain this file, but again its different data
maybe you guys are on to something
i will throw something together tomorrow probably...drinking time.

dcd, thanks for the help, enjoy those drinks!
1. Not first hand, I'm going off this post. That thread's also why I believe the Kaiser wasn't working with the car before the patch.
2. I've spent a lot of time trying, but have come up empty on any detailed hardware specs.
3. I just ran the Kaiser patch and the bluetooth functions the same as it does without the patch.
I'm using a rom from your 1.6.7 kitchen with nothing else added (rom's working great, btw). I had the same issue with the stock Verizon rom.
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?

FZ1 said:
this post
Click to expand...
Click to collapse
good enough for me
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
Click to expand...
Click to collapse
maybe...i dont know how the file functions and ties into the others yet
FZ1 said:
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
Click to expand...
Click to collapse
i take it they are completely different head units?

I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it. I have been just using my Platronics Discover 640 for the BT these days... It'd be nice if someone can come up with a solution for this...

dcd1182 said:
i take it they are completely different head units?
Click to expand...
Click to collapse
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
riDuh7 said:
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it.
Click to expand...
Click to collapse
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?

FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
Click to expand...
Click to collapse
Once connected, I get a really static noise from my end while in the conversation. Of course, it'a really not usable at all....
I'm going to try the reconnecting method that was mentioned above today. I'll come back and report the outcome. And thanks for the help BTW.
EDIT: BTW, my Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?

FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to
Click to expand...
Click to collapse
whoa, someone hook me up with a G35 to uh, test
Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
Click to expand...
Click to collapse
well, peices of it maybe. i would blindly guess that the kaiser is closer to titan than hermes, but we need to exactly identify the bt chip in each. plus its still shady then, ie the kaiser has tnetw1251 for wlan same as the titan and I cannot get their newer wlan driver to work on my device.
what we really need to look at is previous bt stack modifications for other devices. i need a better understanding of tiinit_blah. I've also noticed that the devices that work have a more extensive, or a 2nd audiopara file that sets values for some bt devices. to be completely honest right now i dont know what im looking at and i need to figure out how it all fits together before i know where to start.

Well, I tried reconnect method from both phone and the car, but neither did anything at all. The quality is still crappy as heck. Man... I reallly wish this works.
EDIT: Actually my side of the speaker was complete static, and the other side could not hear what I was saying AT ALL. This efing blows.

slingbox on mogul

I heard the slingbox doesnt lag at all if you are on dcd 2.2.0, but i got a quick question about the remote? I have yet to get my slingbox its in the mail but i was wondering this.....Ive read around and searched that i need to download a certain bin file for IR to be able to communicate with my satellite box. Now heres the question, once i have my slingbox... i plan on loading up the slingbox ppc software and streaming via my ppc. Will all the remote functions appear in the ppc applications(since i loaded that bin to the actual singbox) or do i need to install a remote file on my mogul also?

I am using slingbox on my mogul. The ppc software takes settings from the desktop version. You will need to load a special bin into your slingbox subdirectory. The bin file I have doesn't give full functionality but gives enough for most common tasks. No Red Green Blue or yellow function keys but guide and single number key entry works. There is software to modify the bin but I have found it is very usable in its present form. Hope this helps you on your quest.

do you use it on a satellite box? if so what kind

sfld said:
I heard the slingbox doesnt lag at all if you are on dcd 2.2.0, but i got a quick question about the remote? I have yet to get my slingbox its in the mail but i was wondering this.....Ive read around and searched that i need to download a certain bin file for IR to be able to communicate with my satellite box. Now heres the question, once i have my slingbox... i plan on loading up the slingbox ppc software and streaming via my ppc. Will all the remote functions appear in the ppc applications(since i loaded that bin to the actual singbox) or do i need to install a remote file on my mogul also?
Click to expand...
Click to collapse
FYI, My slingbox still works like crap, even on the new rom. It works, but not great. Sound still lags, and picture still choppy, even with a strong signal on my Mogul.
It is what it is......., I guess they will never fix it,

thats weird i hear some people sayng it works great, then some people say it sux,
what rom are you on?

sfld said:
thats weird i hear some people sayng it works great, then some people say it sux,
what rom are you on?
Click to expand...
Click to collapse
Well, I just went and checked, and it looks like I am on dcd 2.1.0, not the 2.2.0.
I will have to flash the 2.2.0, and then re-check. I just don't have much faith it will fix it though.
I bought my slingbox, and the mogul, the same week, after seeing the htc6700 and the slingbox work perfectly. I never expected a newer phone, to be a downgrade.
I just keep hoping that it will all get sorted out, but it has been months, and I do not see much talk about it.
The whole thing(mogul & slingbox) has been a really huge disappointment for me. However, the slingbox works great slinging TV to my desktop computer, from the front room.

unless htc fixed the video codec/directdraw files no rom is going to fix the problems with slingbox. the same problems still exist no mater what rom you run.

knives of ice said:
unless htc fixed the video codec/directdraw files no rom is going to fix the problems with slingbox. the same problems still exist no mater what rom you run.
Click to expand...
Click to collapse
Yea, that is pretty much what I have read as well. That's why I have little hope for it. Still, I am flashing the new dcd 2.2.1 rom now, just for the fun of it.

Slingbox
i love mine never had a problem with it even before i updated to the new rom..

Mine works great
I have direct tv (diret tv HD-DVR) and slingbox classic. I just install the slingbox application each time I upgrade and I have no issues. Don't need to install any ir cab file that you are talking about either? Mine works perfectly from base install off slingmedia website from my phone and everything is very smooth. I'm on DCD's latest 2.2.3.

HTC TyTN II Video Driver
http://forum.xda-developers.com/showthread.php?t=351986
http://www.petitiononline.com/tytn2vid/
http://www.youtube.com/watch?v=cspRW2jzNrk
http://lifestyle.hexus.net/content/item.php?item=11443

Mine works perfectly!
I am using my mogul (3.26 rom) with my slingbox classic connected to dish network and I have no problems. When I am in EV coverage or use wifi I get an absolutley perfect picture. No lag and very few studders (less that 1 per 5 minutes). In 1x coverage it is viewable, although a little grainy. When I am traveling I often put on history channel or espn in audio only mode and I seldom have a drop, even in the boonies.
Due to the fact that it works well for MANY users, I think most peoples problems are due to upload speed on their home network. I get about 700k up. A friend of mine with an identical setup but only around 200k up often has a much poorer picture and lots of studdering.
BTW, I was using 2.09 until 3.16 came out and it worked just as well.
Jim

I too agree it may be an upload issue. I have comcast. When I was with T-Mobile even with their 2.5G EDGE service my slingbox was slinging fine. However with Sprint and their Rev. 0 and A, my slingbox attempts to fill the bandwidth which is way more than my comcast upload of 350K. I hope comcast isn't throttling it down.
It always streams perfectly for like the first 10 mins then all of a sudden framerate and buffering go into overdrive.
Also, another reason I suspect its my home upload is also because I stream internet TV and youtube videos and have never experienced buffering on the sprint network.
Oh! Well!

You will have to download the ppc software directly to y ou main memory. You do have to purchase the registration key. Not right away, but in 30 days. Sucks but worth it.

Kaiser Video Driver Bounty - ~$6930.78 Raised As Of Jan26
http://forum.xda-developers.com/showthread.php?t=351986
To: HTC Corporation
To whom it may concern,
The lack of ATI Imageon hardware driver support and the 7200 chipset driver support on the TYTN II is obvious. The TYTN II, which claims to be superior to most all current devices on the market, is lacking serious driver and hardware support when it comes to Video playback. In fact, anything that has to do with Direct Draw, Direct X and any fluid movement of pixels on the screen seems behave in an unacceptably slow manner.
Even the camera application that comes with the device slows down to such a slow frame rate that photos are not able to be captured, and cause videos to record and render slower than a sideshow. Videos captured from a third party source render faster on devices over 3 years older using slower technology.
There are many TYTN II owners experiencing the same exact results that have been briefly explained above. The lack of speed in rendering video or 3D content on the TYTN II seems to be a direct result of poorly coded and even missing driver support. If HTC is unable or unwilling to resolve this issue, please prove a full fledge SDK release so that phone owners can repair what HTC was unwilling or unable to do.
Thank You,
All TytnII/ATT Tilt/T Mobile MDA Vario III owners.

Sorry for the delay in posting....I have a sonicview sv8000. Using mogul I have zero problems that others state. Also am using slingbox hd adapter. Love the unlimited data plan (sero) on sprint and my slingbox. Very watchable and no lag.

SKype

does anyone know why skype doesnt work on Ppc

What's your device? OS?
And what about Skype version?
I've got a Cruise and WM6 and Skype 2.2.0.37 works fine.
@+

I have titan and I used 6 & 6.1 wm and no worky

I have it working on WM6 on a Himalaya. How did you install it?
It seems to have trouble installing via cab and needs to be installed using the exe via Activesync (though I am sure there is a way to do it via a cab).
Perhaps you installed it to ramdisk and when your battery goes flat you've lost part of it?
Give us a bit more information of what part exactly isn't working.
Does it install or not?
Does it not launch when you click on it on your PPC?
Which version are you using?
etc

when i make a call i cant hear anyone and they cant hear me and i nstalled with active and cab both dont work

I have a Sprint Mogul also know as HTC TITAN PPC6800 and I just downloaded the SKYPE cab file for pocket pc from the SKYPE.com website and it works perfectly on my phone. I have been using it for over 4 months nows!

Clicking/Skipping during Echo123 call
Hey All--
I've had a Sprint Mogul for about 6 months now--just upgraded to the latest official EV-DO Rev.A ROM, and things seemed to be working a bit better for me (particularily battery-wise, the latest ROM seems to be a little more energy efficient).
So, I felt brave, and decided to give Skype a go. I've been waiting to look into it to fully utilize the WiFi with Skype--cheap and/or free calls from any free hotspot? yes please.--and finally installed the latest available version from the Skype website (can't rememebr the rev #--whatever the website recommends). Of course, it installs, and even calls the Echo123 number, but no sound.
Did a little more research, and found that it's the earlier betas (2.2.0.20 and 2.2.0.18) that seem to be working for people (apparently with mixed with results--some people say the sound quality is awful, some say it works like a charm).
I uninstalled the most recent Skype from the phone, powered down, and then I tried 2.2.0.20 beta--and lo and behold, I was able to hear and record from echo123, but there was a crackling noise (like a CD skipping) any time there was sound coming across the speakers (this is using both the loudspeaker and the included wired headset, also happeded on WiFi or EV-DO, with and without echo correction).
I then uninstalled 2.2.0.20 beta, powered down, and then tried 2.2.0.18. Exact same problem. The sound of my voice coming back on echo123 was actually slightly better than my regular phone; it's just that crcackling that I'm sure will drive me crazy and make the program unuseable.
Has anyone gotten Skype to work on the Mogul without that CD skip sound? I've read through all the forums here, on PPC Geeks, and SprintUsers, and have yet to find anyone definitifely getting great results who can explain how they got there. Is there some other codec or driver that I need to replace? Is there a certain kitchen ROM that will enable Skype to work?
Failing that, is there another program that I can use to make calls for free without having to sign up with an SIP? I also tried fring, but it didn't have any sound on the echo call either, just like the most recent Skype download. Any other suggestions? Seems like things like Octrotalk and SJphone al require setting up some sort of server, which might be fun, but don't really have the time or resources for right now.
I'm leaving for vacation in a few days, and would love to figure this out before I went...any help? Thanks...
C

clg6000 said:
Hey All--
I've had a Sprint Mogul for about 6 months now--just upgraded to the latest official EV-DO Rev.A ROM, and things seemed to be working a bit better for me (particularily battery-wise, the latest ROM seems to be a little more energy efficient).
So, I felt brave, and decided to give Skype a go. I've been waiting to look into it to fully utilize the WiFi with Skype--cheap and/or free calls from any free hotspot? yes please.--and finally installed the latest available version from the Skype website (can't rememebr the rev #--whatever the website recommends). Of course, it installs, and even calls the Echo123 number, but no sound.
Did a little more research, and found that it's the earlier betas (2.2.0.20 and 2.2.0.18) that seem to be working for people (apparently with mixed with results--some people say the sound quality is awful, some say it works like a charm).
I uninstalled the most recent Skype from the phone, powered down, and then I tried 2.2.0.20 beta--and lo and behold, I was able to hear and record from echo123, but there was a crackling noise (like a CD skipping) any time there was sound coming across the speakers (this is using both the loudspeaker and the included wired headset, also happeded on WiFi or EV-DO, with and without echo correction).
I then uninstalled 2.2.0.20 beta, powered down, and then tried 2.2.0.18. Exact same problem. The sound of my voice coming back on echo123 was actually slightly better than my regular phone; it's just that crcackling that I'm sure will drive me crazy and make the program unuseable.
Has anyone gotten Skype to work on the Mogul without that CD skip sound? I've read through all the forums here, on PPC Geeks, and SprintUsers, and have yet to find anyone definitifely getting great results who can explain how they got there. Is there some other codec or driver that I need to replace? Is there a certain kitchen ROM that will enable Skype to work?
Failing that, is there another program that I can use to make calls for free without having to sign up with an SIP? I also tried fring, but it didn't have any sound on the echo call either, just like the most recent Skype download. Any other suggestions? Seems like things like Octrotalk and SJphone al require setting up some sort of server, which might be fun, but don't really have the time or resources for right now.
I'm leaving for vacation in a few days, and would love to figure this out before I went...any help? Thanks...
C
Click to expand...
Click to collapse
i second this... I would love a friggin working skype app for my mogul as well.
i recently tried something called fring, and skype doesn't work on that either.

ranmasaotome510 said:
i second this... I would love a friggin working skype app for my mogul as well.
i recently tried something called fring, and skype doesn't work on that either.
Click to expand...
Click to collapse
Why don't you try FRING?
It can manage Msn, Yahoo, Skype and other SIP accounts.....
PS: It works correctly on my Touch.....

More updates
Well, I've been searching around, and it looks like WM6 doesn't natively handle VOIP (check this thread: http://forum.xda-developers.com/showthread.php?t=299950)
I'm going to try to install these dlls and see how far I get...
Otherwise, I have tried fring, and excitingly, everything worked just fine in googletalk (actually the sound quality I got was *better* than a regular cell call)--except that the person I was talking to couldn't hear me. I could chat though, so at least we could communicate. Similarily, skype through fring to echo123 did not work--I connected, but no sound came through my mike.
I also tried a straight up Skype call (using the 2.2.0.18 beta), however the results were very disappointing. Sound had lots of skips, clicks, slowdowns. Don't see how it would be useful, and certainly not worth paying for.
Also installed Octrotalk--but was surprised to see no talk protocols in the program, just chat stuff through AIM, Yahoo, MSN, etc. Also, the soft buttons (the two screen buttons usually on the left and right of the bottom) seem to be unlabelled--I can press them, but there's not text on them, so I didn't even think they were there at first. A bad install? Maybe my Java is outdated?
Anyway, the search continues...

Bluetooth Audi help

Hello all. This is my first time posting a new thread although I've been lurking around here for a while soaking up all the information from this wonderful site. That said, I have been researching my problem for days now both here and on google and have found no solutions that work. So I'll see if there's anyone here who can help. Here goes....
I have recently flashed DCD's 3.2.6 ROM on my Verizon XV6800 and it works great (love the aGPS too, Thanks GC14) in every area but my car. I have a 2004 Audi A4 with the RNS-E Nav system with integrated bluetooth. Before I flashed to DCD, I had the original stock ROM (2.09.605.8 with Radio 1.30.00) which gave me full functionality with Jetware Mobile (Phonebook and Recent, Received & Missed Calls all transferred). Now, with DCD, it'll only connect to the car and won't transfer anything. If I try to load Jetware, it'll just lock up my phone while I'm connected to the car. Thanks in advance for any help you can provide.

No one else has this problem or a fix for it?

TGabriele said:
No one else has this problem or a fix for it?
Click to expand...
Click to collapse
I wish I was rich enough to afford such a car, then I could maybe help you out. LOL
But I would gladly accept such a car as payment for figuring out your problem.

Nevermind that the car is an Audi. Does anyone else have this problem with a factory BT system that transfers the phonebook to their car.

I had this same issue on my X3 and it seemed to be the way the PPC wanted to transfer the phonebook was by using some file transfer protocol the car did not understand. I could sync it and make and receive calls but no phonebook. Took it to the sprint store and we tried a blackberry and a standard moto handset. The blackberry did not sync the phonebook either but the standard moto phone did. I don’t think it’s possible based on the profiles in the car so I gave up on the phonebook. Try changing the bluetooth stack in the rom, you will have have to make your own rom and beware of the stack you use to make sure it is one for your phone.

I flashed DCD's rom using the kitchen, so making a custom rom from there is no problem to me. What I'm not sure of is how to change the bluetooth stack. I thought it is part of the hard coding for the OS? If you or someone else reading this thread has any information on this or can point me to some info on this it would be greatly appreciated.

I have the 6800 with DCD 3.2.6, and an Audi, with full phonebook transfer so I'll try to help you out:
1. Which 6800 radio are you using? I have found 3.42.50 to be the best as far as Audi bluetooth compatibility is concerned.
2. Jetware will not work with WM 6.1 on the 6800, but you don't need it, since 6.1 included phonebook transfer enhancements.
3. What version of Audi software are you at? There have been several releases since your year. You should be able to get more info from www.navplus.us and of course from your stealer.
4. You do have your bluetooth settings set for "discoverable", right? And, (I don't know why this is the case) it seems when OBEX is on, the phonebook and other items transfer quicker.
If you have the 6800 radio and Audi software updated, you should have no problem. Jetware is no longer necessary.

1. I am using radio ROM 3.42.50
2. The reason I loaded Jetware is to have it sort my contacts by Last,
First. Is there another way to do this?
3. I am running sw0200 on my RNS-E, but was considering moving up to
sw0260.
4. I haven't tried this, but I will.
Lately I've also had the issue where if the phone is connected to the car for a while, the bluetooth on the phone will shut itself off and not turn back on until I do it manually. I'm beginning to wonder if I should just hard reset and start from scratch. Any ideas? Thanks in advance.

I'm sure there's a reg tweak for listing First name first in contacts. Hunt around here or at ppcgeeks. If you want to stay on 6.1 jetware will not work (unless they release a new version).
Definitely update the Audi software to the newest version.
DCD has done nicely fixing power settings in the last few ROMS to solve the bluetooth shutting off issue, although when memory gets very low, it may still happen. You must have some other program or process running that sucks up memory if you are still experiencing this.
It never hurts to hard reset, as long as you have the time.

So, I've updated to SW0260 and done a hard reset and I'm still experiencing problems. Do you have any more suggestions? Thanks in advance.

TGabriele said:
So, I've updated to SW0260 and done a hard reset and I'm still experiencing problems. Do you have any more suggestions? Thanks in advance.
Click to expand...
Click to collapse
I'm running an after market HU (Pioneer AVH-P4000DVD) and DCD's latest ROM, and Jetware works fine on mine. Just re-transfered my phone book earlier today....

problems with the HTC Wired Remote rc e100

Hi, I am running JACMan 1.62 (a great build) with the latest radio and spl. Recently i purchased the HTC Wired Remote rc e100. when i tried to install it, i get an error message telling me tat the latest driver is already installed. Needless to say, the wired remote does not work. I tried to use an app called toggelheadset, but this only allows the music to come through and does not allow the control function of the wired remote to be used, defeating the purpose of purchase. I was wondering if anyone else had this problem, and hopefully someone might have a solution that they could share.

Just quickly looking, it seems people with other HTC phones have the same problem
http://forum.xda-developers.com/showthread.php?t=336902
Is this supposed to work with the Dream? Did HTC themselves say it would work, or just some reseller said so?
Not to mention you are running a modified ROM, so I don't think it should be suprising if you find hardware that won't seem to work, since said hardware has been designed/tested on stock ROMS.