Related
Posted: Wed Dec 17, 2003 16:46
Post subject: Tmobile update Non permanent voicemail and missed calls icon
--------------------------------------------------------------------------------
Something about the TmobileNL RomUpdate 1.60; I've upgraded from my french version 1.50 to this english version not bothered by the switch from the french language to the english one; It works almost flawlessly except that i lost a thing: the permanent display of missed calls and waiting voicemail message has vanished: so when someone leaves a voicemail, as the person hangs up, a bubble stating that a voicemail has been left is displayed for a very few seconds showing two buttons, one to call the voicemail, the other to erase the displayed message; After a few seconds, the message vanishes and no icon remains on the display to remind you that you have received new voicemail.
This is very annoying and very unpractical so i hope that someone has a way to tweak the Qtek in order to display back such an icon and that it stays displayed untils one has listen to the voicemail and erase the messages from the voicemail box.The same goes for the missed calls indicators.
Can someone help me out of this? is there a new romset correcting these issues? A tweak for it.
Brgds, Arnaud
Tu utilises quel réseau ?
[Peter Poelman: "Which network are you using?"]
Vanishing Icons
I use all three french networks as i have subscriptions on all three.
But it dosn't come from the rom set : after hardresetting, everything is ok and the icons are back;
By the way Murcielago, could you backup your actual french QTEK2020 or XDA2 romset and send it to me so i can at least store the french romset and maybe restore the french language version of the device?
Hi,
I don't have a french ROM because I bought my XDA II in Singapore.
All I was interested in was if you can use GPRS with SFR ?
I'm only able to connect to GPRS then nothing happens. I don't browse, I don't resolve, I cannot do anything.
If it works for you, can you contact me and tell me how you configured it please ?
Thanks
GPRS SFR
No problem encountered in using gprs wap and email access on SFR
Arnaud
Sorry for the late reply
ok... I'll check.
Can you contact me if possible ?
check your pm
Hi there,
Is there any call-forward management program for diamond?
Such that I can forward a phone call to office when I at office, or forward a call to home when I at home.
Sorry for my English as it is not my native language.
Thank You!
I think there is no such program. However, Microsoft creates an excellent tool in the Settings called Phone. Using that setting, you can easiy set forwarding number to your network in different scenarios such as Unavailable, Busy, etc.
I do agree that Phone setting is great for call diversion...
Yet every time when I need to divert call... (sorry that my OS is not English so the wording may not be exact)
Start - Setting - Phone - Service - Call divert - Get setting - enable diversion...
Any easier way to get the call divert done without memorizing the **0x*xxxx# ? Thanks
I see. Thank you very much!
And there is Call firewall. .. .it's nice and easy to use.
search for it ...
I spent a couple hours sorting through blog posts, downloads, cabs, blah blah blah... with the goal of getting my forsaken Treo Pro (WM6) to use VOIP through my office's SIP/Asterisk setup.
To save you all some headaches, here's the distilled version of what I found to be the best combination of software and quick hints for install:
I started with this blog post, to give credit..
http://voipguides.blogspot.com/2008/05/voip-sip-client-for-windows-mobile-6.html
But I used different software... so I've included a zip with the package of all the stuff I installed to make the damn thing work.
1) Install all of these:
- voipdrivers.cab
- custelvoip.cab (works better than MajikVOIP.cab)
- sipconfig.cab (originally named SipConfigTool_2_0_1.CAB)
- audioroute.cab (from http://www.teksoftco.com/index.php?section=freeware)
I've also included setupvoip.cab .. which is a fancier SIP setup tool, and may work better than sipconfig... but I used sipconfig originally, so that's what I'm writing up here.
2) Restart your phone
3) Run sipconfig ... enter all of your sip configuration details, and also use the menu option to enable VOIP over 3G if you desire it.
4)Now go start -> settings -> personal -> Phone. Choose ther Internet Calling tab. Set the option for "whenever available".
5)On the main/Today screen you will see a phone icon with description VOIP ( you entered name of provider VOIP in (step 4). It'll show you the status of whether or not it has registered with SIP. A Hint, you might need to trick the phone into connecting to 3G first... e.g. by browsing the web... otherwise WM6 at least doesn't seem to auto-connect to 3G for SIP.
6) After connecting using 3G or wifi, You will see the status displayed as VOIP: Available.
7) You can now make calls as normal, or receive calls in.. and everything is routed through VOIP.
8) You'll notice that many WM phones will route the audio through the rear speaker (annoying) .. which is why you installed audio router from teksoft... it adds a little icon on your top system tray to let you change between earpiece and rear speaker for audio. There's a bunch of audio switchers out there. This is the best one by a mile. And it actually works.
Cheers,
Andrew Eross
Thanks for your effort. Similar tool is already posted as Schap - Setup voip Tool -
http://forum.xda-developers.com/showpost.php?p=1364611
Thank you!!!
I've looked around for a guide as clear as yours. You've the best guide all around... Thank you a bunch...
Thanks for your great job. I new on Windows Mobile so I need a lot this kind of help.
I download and followed your installation procedure on a HTC 3G+, T3238 (chinese version of the HTC 3G, manufacturer HTY Taiwan)
Works well, Hope others also will be successfull
By the way, is there an also simple way to sending DTMF tones for remote control of my answering machine? When I try to send numeric keys after the call is connected it looks like I start a new connection with numbers actually for remote control of my answering machine.
Hi, I'm also in the club that has browsed hundreds of post looking for a setup of VOIP and also looking for a solution on good incoming sound level when using Voip on phone. Your files solved all my problems!
Phone: HTC HD2 Norwegian with Rom 1.66. Use the Norwegian company www.iplink.no for VOIP at home / office and (now) on my mobile phone.
Made my own ipdialplan.xml which can be found attached to this post.
Done some testing calling people through Voip: after approx 1 minute the connection falls down. I looks like I'm still connected to the other part (interface shows that a call is going on) but none of us can hear the other part. I then have to cancel the call in the phone interface. Make new call to same person, after approc minute the connection goes down again...
Is there some kind of registry setting that controls this "timeout"?
Hi, this tools does work also on windows mobile 6.5?
I know that on the HTC Fuze some of the wmvoip.cab installs breaks the GPS - anyone test this yet?
THanks!
does this work on hd2
I've done everything you said, but I can't find the option to show internet calling is available. I have Kumar 1.5 installed, and am about to try another ROM (maybe Laurentis, the SIP drivers are cooked in). What are you running?
shah_vm said:
does this work on hd2
Click to expand...
Click to collapse
yes, it does!
Best Voip All in one solution. Try This
http://forum.xda-developers.com/showthread.php?t=596682
I tried last night to no avail. I am guessing that using a WM6.5.x ROM stops me, because I can't access the right settings (start-settings-personal-home or phone) because my settings button takes me straight to the black screen of text version. I even tried to go to a 6.5 ROM (cooked with VOIP drivers in), and even then I couldn't get the VOIP phone icon to appear on the today screen. Every time I selected it from the Internet tab in the setting, it would just ignore my changes.
I would love to get this working with a nice cooked 6.5.x ROM, and am not giving up yet, but man is this frustrating. As a side note, I am learning lots about the workings of WM.
sidelait said:
yes, it does!
Click to expand...
Click to collapse
thanks for the reply. i have also installed i was able to receive incoming call but unable to make outgoing call. are you able to make outgoing call?
Okay, I feel like an idiot, but I figured out how to enable the internet calling tab on my HD2. I am still apparently learning lots about WM6.5. After I disabled Sense, I could add tabs to the today screen. I did everything right, but the voip tab just either says searching or not active. And it somehow disabled my data connection. Not sure anymore, almost through trying ROMs. Is everyone else running this on a stock ROM, or are there certain features that interfere with this?
VOIP almost working
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
forepj said:
I've implemented Internet Dialing and have SIP configured my my provider and I am able to receive calls. But, I notice that when I dial out a "9" is put in front of the number I'm dialing making it impossible to dial a number correctly. How can I change this?
Click to expand...
Click to collapse
You need to edit your ipdialplan.xml. It's in your windows directory. Basically it is set up by default to dial a 9 and in area code 425... If you look at it you should see where to edit it... There's also a utility knocking about here to set up a basic one for other countries...
Can't svae ipdialplan changes
I can open Total Commander find the file and make the changes to ipdialplan.xml by taking the "9" out of the 10 digit plan and the 7 digit plan, but I can't save the changes. I get "Error, could not create file" every time.
It's either open or write protected. Edit on the PC. Copy it over with a different extension. Rename the original, and then rename the new one to the right name.....
I have this very strange problem.
I have tried to install all this, but it works only partially.
Outgoing calls work and the receiving party can hear me. However, I don't hear them. Also, on incoming calls my phone doesn't respond at all.
Does anyone have any idea what is the problem?
I'm having a Topaz @ WM65.
Hello,
first of all great site I have to say... got me a lot of help with my new HD2 (switched from Nokia S60 to WM)...
No I'm trying to get my HD2 work as an VOIP Client over pbxes.org.
I found the Cab Files to enable the Voip Settings Tab and the Config-Tool.
Installed both, configured and it's working!
Now I have the Problem that I can not choose wheter to make the Call over GSM or VOIP, It's always dialing over voip (when VOIP connected). There is no config tool/button for manila (HTC sense)...
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
I'm using Nimbuzz, AGEPhone and PortSip as well, everything works with wifi-connection.
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
thommy5583 said:
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
Click to expand...
Click to collapse
Try installing something like Second Today. You can enable the internet calling home screen item on it, flip to it when you need to and disconnect the Voip.
fiftyz said:
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
Click to expand...
Click to collapse
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
CanEpia said:
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
Click to expand...
Click to collapse
Thank you... Yes the problem was with dialplan. I solved now...
But i have another problems:
1) When I call a number via sip the dialer windows show last call and current call over eachother insted of current call.
2) I'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB on my Leo... Is working without the need of audioroute but I saw that this cab is for WM 6.1 and Leo has WM 6.5 Rom. I need VoIP_HD.cab?
3) Is there a way to make manila show also SIP operator instead of GSM when Internet Calling is available?
4) How can we change comm manager to change one registry value when button is turned off?
Hi did you managed to get the audio out the front speaker and not the back speaker
Or is this problem still the same
Service shows selected but no dialing
I have the same problem as fiftyz. What did you change in dialplan to correct? Could you share your dialplan?
VOIP ENERGY Leo ROM
Dear all I have searched en searched but didn't find a answer anywhere.
The problem is next:
I want to use VOIP on my TP2.
In the ENERGY Leo ROM VOIP is integrated.
I only download a SIPconfig tool to make it work.
But I don't get the speaker and the mic. to work properly.
Calling as a fact is working but then the people can’t hear my.
And I hear than only over the back speaker.
Does somebody know how to solve this problem??
sip voip solved
http://forum.xda-developers.com/showthread.php?t=596682
tested and working
works great
http://forum.xda-developers.com/showthread.php?t=596682
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Voice cammand is great, Tellme not so much
Voice command, as you may have already learned, works great with no training. You can voice dial, control media playback, hear your next appointment, and have callers annouced through your BT. Absolutely essential for me while driving. It will not allow you to dictate texts however. Thats really the piece that I was hoping Tellme would fill in, but it just doesn't seem to work as advertised on their website. To be fair, I've never seen it used on a device that came with it installed. It might work like a champ on those handsets, but it's never worked at all for me.
EDIT: I see you can't edit the title of your post. . .
Voicecommand not announcing bluetooth?
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Voice Command
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
That's it.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Not sure. Making a folder with shortcuts to the setting might work, but personally I wouldn't think about moving that stuff from where it lives.
polera257 said:
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Click to expand...
Click to collapse
No set up needed other than ticking the option in the settings menu.
wlm said:
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
Click to expand...
Click to collapse
It is a download. Do a search and you will find plenty.
I can make the VC work on the phone just fine, but I have an ANT in the car, for BT.
When I try to talk with no car noise, or with car noise, the phone goes stupid, does nothing, well, beeps some kind of talk back, like dumb ass I did not understand you
Tried everything to get bluetooth voice announce
Crissg, I have checked the box to announce calls actually spent two days with Tmobile tech trying to get Voicecommand to announce over bluetooth but no luck. That is why I was wondering if you have this working on your phone. If so did you do any registry changes. I tried everything
Hi CRISSG,
Thanks - tried to locate it, but it's not there. Must be a download. Is the one you are using a WM app? IF so, where did you find it? There seem to be many apps - some with real problems, and I don't want to go that route!! HTC HD2, on Vodafone.. THANKS!!!!!!!
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
It came preinstalled
bigfry said:
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
Click to expand...
Click to collapse
Looks like the files are in the Windows directory of the device. I'm not educated enough to pull it out in a usable fashion. Have you checked the ROM threads? Possibly one of the chefs has already cabbed it up?
I just realized that I'm almost always the one doing the calling from the car, and I hadn't actually recieved a call on the new HD2 (while driving) to verify the annoucement function yet. I just tested it, and it is ringing in the s9 headset, but annoucement comes over the speaker. Interesting. Commands for calls and media and calendar are working fine. As soon as I can get my wife off her phone, I'll get her to text me while I've got the headset on to test that as well.
Edit: It plays the assigned sound for recieving a text over the headset, but is not announcing the message like it did on my Tilt. Sorry if I gave the impression that it was. Like I said, I use it every day, but I make way more calls than I recieve when I'm in the car. Now I'm with you guys wondering why we've lost funtions that we had before.
Edit #2 Was just in the car, and got a text. It was announced through my Jabra earpiece. So it might have something to do with the BT profile being used, as annoucements didn't work with the s9 that I use around the house.
No option of Voice Command in my T8585
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Regretfully in my HD2 , T8585, ROM: 1.48.405.2(71294), Manila:2.5.19211619.0
- there is no such option at all in the
above mentioned path: start, settings, menu, all settings, personal, voice command.
another HD2 n00b
I have been trying for a few days no to get voice set up. I too am UK with vodafone. No voice buit in. I have bought retail MS voice command 1.6 and it fails to install. Cyberon voice speed dial installs. The next problem I have is that, I want to be able to trigger voice calls vial my bluetooth headset. (plantronics 370 explorer) Neither this or my old Jawbone bt headset will trigger voice calls.
I really want to get the MS voice command to work as it looks great and ou don't need to train it. Any help really appreciated..
For all the uk users just do a Google search for microsoft msvc 1.6.21725
I am using this on my HD2 with no problems.
Announcements of callers doesn't work though.
Thats great thanks for this. Appeared to install fine. Not sure if it insatlled right though. I can find it in setting>other>voice command. Looks only to be settings in here. I can't get it to run or prompt for voice.
try pressing and holding the green send key
Thanks for this. I have a green "Talk" button when in phone. Pressing this or long press just call the last number.
The button on my Jawbone activate the voice, which is cool, but the button on the plantronics explorer still does nothing. I guess it is something incompatible with this. Typical eh as this is my favourite headset for out walking. It is great on a windy day.
xtacybyme said:
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Click to expand...
Click to collapse
What Voice Command Software came with the HD2? Which version of the phone are you referring to?