Related
Hi,
I experienced some problems wih my HTC Tytn (R 1.03.03.10).
At home I use a wifi connection with WEP 128 bits authentication.
The wifi connection procedure goes ok every time (with regular Ip adderess assigned).
After connection I can normally surf with IE (or use other other applications as MSN) but only for few seconds. In fact after few second it is not possible to surf anymore although it seems to be connected to wifi AP with regular IP address assigned (the icon and the specific menu say me that). After other few seconds It is possible to surf again, and so on..... The connection seems to drop and raise randomly.
I tried to modify some settings (eg. Power save mode) but with any result.
Thank you in advance to anyone could help me to solve this problem.
M.
marmao12 said:
Hi,
I experienced some problems wih my HTC Tytn (R 1.03.03.10).
At home I use a wifi connection with WEP 128 bits authentication.
The wifi connection procedure goes ok every time (with regular Ip adderess assigned).
After connection I can normally surf with IE (or use other other applications as MSN) but only for few seconds. In fact after few second it is not possible to surf anymore although it seems to be connected to wifi AP with regular IP address assigned (the icon and the specific menu say me that). After other few seconds It is possible to surf again, and so on..... The connection seems to drop and raise randomly.
I tried to modify some settings (eg. Power save mode) but with any result.
Thank you in advance to anyone could help me to solve this problem.
M.
Click to expand...
Click to collapse
Couple of routine things you may already have done/tried/checked:
Try best performance setting in the "power mode" in Connections>wireless LAN.
And the range of the wifi is only around 10 to 15 metres are you within this without large obstructions?
Could also set a fixed IP address.
Mike
Thank you Mike,
I've already tried to set power performance to "power mode" and I performed my test near the (2-3 meters) without any obstructions.
Later I'll try to configure a static IP address and/or to deactivate WEP authentication. I could try a mac address based access too, instead of WEP.
I'll inform you later !!!!
M.
marmao12 said:
Thank you Mike,
I've already tried to set power performance to "power mode" and I performed my test near the (2-3 meters) without any obstructions.
Later I'll try to configure a static IP address and/or to deactivate WEP authentication. I could try a mac address based access too, instead of WEP.
I'll inform you later !!!!
M.
Click to expand...
Click to collapse
Ok - can't see problem with WEP though - I use that with 128 encryption without problems.
Mike
I'm facing the exact same problems with my home network.
Connection up and down.
At office network never faced such a behavior.
Since I realize I'm not alone with this problem I'll try to investigate it more.
I've had the same problems at both my home and office. I use WPA-PSK w/ TKIP for security on both devices, though each of the access points are of different manufacturers (home is a Linksys, office is a Cisco 1231). Both routers run compatibility modes for 802.11b backwards compatibility and thats the only thing I can think of that is common to both. My WiFi connection usually associates with the AP but always ends up with a 169.254.x.x IP and the only thing HTC has been able to tell me is that the 8525 only supports 40 bit encryption (which is blantently wrong if it's even detecting the WPA-PSK). Has anyone come up with a solution or even seen the same problem? If needed I can post logs from the Cisco AP that show what occurs when the 8525 tries to associate.
mantrius said:
I've had the same problems at both my home and office. I use WPA-PSK w/ TKIP for security on both devices, though each of the access points are of different manufacturers (home is a Linksys, office is a Cisco 1231). Both routers run compatibility modes for 802.11b backwards compatibility and thats the only thing I can think of that is common to both. My WiFi connection usually associates with the AP but always ends up with a 169.254.x.x IP and the only thing HTC has been able to tell me is that the 8525 only supports 40 bit encryption (which is blantently wrong if it's even detecting the WPA-PSK). Has anyone come up with a solution or even seen the same problem? If needed I can post logs from the Cisco AP that show what occurs when the 8525 tries to associate.
Click to expand...
Click to collapse
Just out of curiosity, when you say backwards compatibility do you mean the router is capable of "g" rather than "b". If so have you tried "g".
Mike
I m having the same problem. I connect to Wifi, i can surf a couple of pages and then i just cannot browse anymore. I have to turn off wifi and then turn on wifi to continue browsing from where I was at.
Any help on this would be greatly appreciated
mikechannon said:
Just out of curiosity, when you say backwards compatibility do you mean the router is capable of "g" rather than "b". If so have you tried "g".
Mike
Click to expand...
Click to collapse
When I say compatibility it means that the radio on the AP can fall back to "b" speeds if necessary. And no, I haven't switched them to only "g" mode as that should not be necessary if the wifi implementation on the Hermes is up to spec.
Same problem here?
I have a Cisco N router, so does that mean its useless for WIFI for my phone?
I also tried to change the settings to Best Performance but it wont allow me to change them? Any suggestions please anyone would be greatly appreciated please? Must I have only a G router? And whats the SSID in current configurations? Should I enter the Routers IP? And where should
I enter it please?
Hi,
I was searching the forum but haven't found any useful info about that.
Do you know any WM5 software which can change TyTN into wireless router ?
Something like WModem, but using 3G and WiFi in the same time.
My idea is to come back home, plug the charger into my phone , run WRouter and have wireless internet connection everywhere in the flat from my mobile connected to 3G web'n'walk T-Mobile network.
What do you think ?
Cheers,
BenOne
IMHO -
no way
no driver support for that
AFAIK no application
why? power consumtion on highest power setting is terrible, and battery is soon completelly depleted, there is also neecesary to left charger in phone...
if you need wifi router (w/ NAT, firewall, VPN...) you can buy inexpensive router for few bucks and it is more compatible, more stable, more usefull, more secure, far better manageable etc...
yeah right, but for what another device if I have one ?
I am charging my tytn everyday, you know how it eats battery...
just wanted to know, it could be quite useful. cheers
U can use bluetooth on the tytn as a router with a reg hack u can connect more then one computer, not the same range and speed but it is possible.
yeah but then everybode have to have bluetooth in their notebooks. we have 3 laptops in the flat and nobody has bluetooth in it. but what then ? everybody are connecting using dial-up, like thorugh normal usb cable, but instead of it, thorugh bluetooth ?
now we have like that - I am commin back home, connect tytn to my laptop, dial-up, and wireless in my laptop is ad-hoc configured, so everybody are connecting to my machine, and modem (tytn) is shared. if tytn has wireless, I thought, that I don't have to leave my laptop all the time turned on. It could be great to leave connected to charger and that's all. All the internet and local home network could be through that. If there was a linux distribution for this phone I am pretty sure this option would be one of main in netwokr configuration...
anyway thx. just wanted to know if there is any piece of soft for that...
benOne
have you seen this official htc link: http://www.europe.htc.com/support/software/htctytn.html?lang=en
it seems it could be possible with vista... but I'm not sure...
EDIT: NO WAY... This is just wireless modem driver for vista... but not for wifi connection! Sorry!
Anyway, I'm very interested in... it could be very interesting for other connections as well... to get online a game consolle...like nintendo wii...
I really hope this dream will come true!
yeah, imagine you play in the bus online. cool!
battery problem. in this configuration I give our tytn 1 hour working on wifi and 3g used together in the same time...
anyway at home you have charger, in a car aswell, you can buy few batteries on ebay and problem resolved heh
sooo, who can start write this application ?
to which company or open source coders team should I send this idea ?
You could tether your Tytn to your laptop using either a usb cable or bluetooth, then setup an adhoc network through your laptops wifi connection. All you need to do then is do internet connection sharing between your bluetooth DUN connection and your wifi card and you should be in business to let your flat mates connect to your adhoc, which essentially turns your laptop into a router. Let me know if that helps or if you have any further questions.
I've done this myself with my mates and it works flawlessly.
Yea, I searched around a while on this way back but there is no solution that I could find.
Your best bet is to either just use PAN bluetooth, or tether just one computer over bluetooth and share your connection via wifi. It's super easy on a mac, not sure about windows.
Benone said:
yeah, imagine you play in the bus online. cool!
Click to expand...
Click to collapse
ehehe...NO, MATE.... There's NO adsl connection where I live... So I can just use my tytn as a HSDPA modem and I use to share his connection on my PC, BUT I'm not able to share it throug wifi on my wii...
I really hope a coder could solve this... even if I'm not sure it's possible.
Lancealot said:
You could tether your Tytn to your laptop using either a usb cable or bluetooth, then setup an adhoc network through your laptops wifi connection. All you need to do then is do internet connection sharing between your bluetooth DUN connection and your wifi card and you should be in business to let your flat mates connect to your adhoc, which essentially turns your laptop into a router. Let me know if that helps or if you have any further questions.
I've done this myself with my mates and it works flawlessly.
Click to expand...
Click to collapse
yeah, cheers pal, I've already written about that above. I have this kind of network at my home frome the begninnig of using tytn. What I want is to stop using my laprop as a router, my tytn has everything to be a router itself, it needs just a piece of software. This thread is only about piece of software.
How far from the WiFi HotSpot can your X1 get before the connection is useless? I'm in a house and it barely works in the next room (newer house, walls made of drywall). My brother has an iPod Touch that works all over the house perfectly (same router). I'm wondering if there is something wrong with the WiFi radio on my X1?
i get v good coverage from the x1 as good as the iphone. try changing your radio firmware
WhyBe,
Is it set to best performance or best battery?
Go under settings to check.
Cheers.
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
cooin said:
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
Click to expand...
Click to collapse
same , even good outside/inside the neighbours house ,
be sure to have the 1.15 or 1.16 radio (or smthing like that , the new ones)
+what poisonwolf said
and dont buy a metal case for ur phone
also helps if i slide open the phone for me ... and its good to face the router too (not with ur back towards it)
cooin said:
Doesn't it depend on the HotSpot itself ?- I mean on the router, its signal strength and etc...I connect to my router trough 2 brick + concrete walls and have no problems at all...Always connected in every room
Click to expand...
Click to collapse
I can always connect to my router from the door on the street (I live on the first floor) and everywhere in the house including the bedroo with router being on the corridor outside.
And I did not tweak anything in my EnergyROM 3.0
Thanks all. I have never specifically changed my radio firmware. Is this something that is updated when I change ROMs? I've went from R1a to R2a to R3a. Does the radio get changed with these?
I have the X1 set to best performance.
It depends on what kind of router you have. The cheap ones are crappy. I have a medium spec one and I get good connectivity through 3 walls.
I have a LinkSys G router. It is pretty common. Everything I use works fine with it (3 laptops and iPod Touch). Only the X1 can see it but not connect.
WhyBe said:
I have a LinkSys G router. It is pretty common. Everything I use works fine with it (3 laptops and iPod Touch). Only the X1 can see it but not connect.
Click to expand...
Click to collapse
Did you see the settings in the phone that allow you to use better Wi-Fi reception, but get poor battery life? I had problems with Wi-Fi until I set it to "better performance" rather than "better battery life".
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
with linksys and all other routers really one have to upgrade the firmware once in awhile
to get best support with newer devices
WhyBe said:
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
Click to expand...
Click to collapse
Nope. There is a problem. I have no idea what it could be though . Maybe an update is a good thought.
I only use stock ROMs and haven't really tweaked my system beyond factory state. So I don't see why I need to update anything. I'm thinking there is some sort of conflict between my internet settings for the phone and the internet settings for the WiFi connection?
WhyBe said:
I only use stock ROMs and haven't really tweaked my system beyond factory state. So I don't see why I need to update anything. I'm thinking there is some sort of conflict between my internet settings for the phone and the internet settings for the WiFi connection?
Click to expand...
Click to collapse
Facepalm.jpg
Update the router not the phone .
WhyBe said:
Yes, it is set to best performance. My X1 recognizes the router but doesn't connect. I'm wondering if there is some other problem?
EDIT: OK, I just discovered that if I turn off the phone radio, the WiFi works properly. Is it supposed to be this way?
Click to expand...
Click to collapse
Mine did that when I 1st tried to set it up, it would find the network (hidden) ok, but would not connect. No matter what I tried, even though 2 pc's (wired), laptop (wireless), xbox (wired) & iPod touch (wireless) were working fine.
I gave up on the X1 and turned my attention to the router, tried a static IP for the X1 etc (it's back on DCHP now), after rebooting the router, the X1 connected and worked fine and it has ever since. I have no idea why - but initially it would not connect - something funny with the router.
I have a netgear router and every now and then kicks me off. i have to disable my wifi on the x1 and reconnect or even power off the router and back on for it to work.
Turn off your router for 1 minute and power back on then try to reconnect your x1.
I have a Linksys WRT160N router and it actually doesn't even detect it when it transmits mixed speed, only of I put it on B and G it detects it.
Otherwise the signal is average, a bit worse then my laptop.
WhyBe said:
How far from the WiFi HotSpot can your X1 get before the connection is useless? I'm in a house and it barely works in the next room (newer house, walls made of drywall). My brother has an iPod Touch that works all over the house perfectly (same router). I'm wondering if there is something wrong with the WiFi radio on my X1?
Click to expand...
Click to collapse
I only use Wi-Fi at my university. Well basically my Wi-Fi works everywhere around campus, at the dorms, and at the movie theater right next to school.
It's freaking great, but I prefer 3G. I just can't afford it.
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though
Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.
knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck
HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!
Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.
funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation
I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.
Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!
Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please
I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?
Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.
I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.
hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess
PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved
I have a vodafone uk hd2 and have been really impressed with it as a product. I have not had any luck with the supplied wifi router software, I go through the minimal setup and press start and as far as the phone is concerned the router is up and running, the problem i have is that neither of my laptops can see the router.
Has anyone had any luck using it? Is it possible that vodafone have disabled it somehow?
Alternatively so i can manually add the router does anyone have the following details that would be setup automatically;
wep in use? is it 128 pass phrase or 40/128 key?
open system authentication or shared key?
im guessing the wep index would be 1?
Thanks
Search .. it was discussed 10 times already.
Thats as maybe but none of the several threads have a real answer as to why some people have it working and others dont. It also seems that the functionality can be effected by soft reset which isnt ideal at all. Also i havent been able to find any of the above original settings that i asked for in the threads hence the post.
Works for me
Hi,
works great for me - just have to make sure that you're not connected to WLAN with the HD2 when trying. Disabling WLAN, then starting WIFI-Router does the trick for me.
Good luck !
I am on vodafone and wifi router works perfectly for me. It worked when I had the stock 1.43 rom and it works with all the cooked roms I have used since.
i did notice it only works with 802.11g not with 802.11b devices like PSP or some other phones..
Is that really the case that it only works with 802.11g devices? Im fairly sure my netbook isnt new enough to have 802.11g and as such probably wont see the router. Has anyone found a way to get the router visible to 802.11b devices?
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Just to add on my previous post , I tried using WMWIFIRouter , also come back to same result ....
pagoda123 said:
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Click to expand...
Click to collapse
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
N Works
bel_z_bub said:
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
Click to expand...
Click to collapse
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Any chance it's the computer you are trying to connect with? Tried with my work computer, but couldn't because our Dells have computer to computer(adhoc) connections locked out for security. Does the wifi router function show up as adhoc or access point?
zSpinner said:
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Click to expand...
Click to collapse
ok, now try and get N speed with only one antenna...
Ok Ive got a similar problem with the wifi router and vodafone
everything works hunky dory wifi router turns on, computer connects all is good only when i try and access a website i get a http error 403 forbidden message as if voda have restricted access i have no idea how this would be possible though.
Ive tried many site same result and many browsers chrome, safari, ie, firefox and opera
same thing
the strange part is that tweetdeck and skype work while the browsers don't
HHMMM
anyone else experienced this problem
As I'm on O2 I was quite keen to flash a new ROM to get the wifi router working as they did the dirty on us by ripping it out of the 1.43 they shipped it with...suffice to say that I'm not overly impressed with it after the couple of trials I've made using 1.66 ROM as the speeds its capable of generally fall short of what you get if you simply connect it via usb and use data sharing..bear in mind that I've only tried it twice so far and as such I may refine my opinion with further trials in different locations but as I was hoping to avoid repeatedly connecting leads to the usb socket it's a bit of a blow sooner or later, wear and tear will be an issue to think about.
my findings
had a play with the router, just to see and initially thought it wasn't working.it connected, but wouldn't pass any data.
25 minutes of my best network technician skillz later still no joy... that is until I remembered the laptop has a fixed ip and default dns server address set. as soon as I set them to automatic, bingo, fully working.
did a speed test from the laptop (mobilespeedtest.com) and got just under 900kbit over 3g. winner!
The connection only shows as 802.11b, but that's fast enough for the 3g connection so no worries.
the only down side is that it's adhoc, so the wifes n95 doesn't see it..but then again thats possibly a blessing In disguise!
EDIT as mentioned by the poster below, I had three connections present, (wap.o2.co.uk, mobile.o2.co.uk and paymonthly.o2.co.uk) and the router wouldn't work on them all, though I forget now which it would and which it wouldn't.
I never tried with 1.43 O2 ROM, but after flashing to 1.66 stock rom I just tried this.
For some reason I have 3 internet connection options:
1) Pay monthly contract
2) o2 active
3) mobile web
My standard connection is "mobile web" so I tried this first, and my laptop couldnt see the HD2 as a WIFI router. I then tried the "pay monthly contract" option and it worked straight away.
Now under my Notifications screen under O2 3G UK, I have two connections running, and the download speeds running the same as my home broadband due to the HSPA connectivity available through the phone.
Anyway, I just thought I would share this with anyone it may help.