guys,
questions, i am able to sync with my HD and WMC and install apps for the 1st time.
after i rebooted HD, i am not able to get connected via WMC again.
things i tried:
1. change to 2nd USB port but not able to do it again.
2. plug out the usb cable and plug in again, but did not work.
So i rebooted the laptop and connects again. AND IT WORKS Seamlessly. but once i disconnected or reboot the HD, the sync problem occurs again.
any other people is encountering the same problem?
help is deeply appreciated.
Related
Last week I hard reset my 8525 after having it about 2 mos because it had stopped syncing (and could probably use it anyways), and it was working fine for a while but suddenly will not sync again. I have Vista so I use Windows Mobile Device Center, and have the latest ROM. I am trying to find a fix without having to do another hard reset.
Some things I have already tried:
1. Deleting the current pairing with my laptop and re-pairing
2. Using the y-extension included
3. Soft resetting while it is and is not connected
4. With and without advanced network functionality (or whatever) checked
The thing is it shows the device connected in my system tray but the phone itself will not connect. Can anyone help me here? I could not get an answer in the AT&T forums. Thanks!
Delete any and all partnerships on the phone AS WELL AS the Computer. Try using a different USB port. If you are using one in a hub, plug it right into your computer, try different ports in general. Try and see if you can "set it up" to sync with another computer, to determine if its more your computer or your phone. Hope this helps.
I tried your suggestions, including connecting it to my desktop, which runs XP Pro with the latest activesync version. No luck. I also tried another USB cable. Had anyone ever tried contacting HTC with issues? Do they just give you generic info/point you to their FAQs?
Yesterday I updated my T-Mobile Wing from the stock WM6 to WM6.1 and OpenTouch 4.0. I am running Windows Vista so I have to use the Windows Mobile Device Center. My problem is the first time I tried to sync I had no issues (contacts and email/appts). Now when I try, it doesn't even connect to my device. Anyone have any suggestions on why I'm having this issue?
BLUETOOTH?
Does Your Computer Have Bluetooth, Thats What I Used To Get It Synced The First Time?
k20y2kswap said:
Does Your Computer Have Bluetooth, Thats What I Used To Get It Synced The First Time?
Click to expand...
Click to collapse
No it doesn't have bluetooth built in or anything. Like I said, I was able to get it sync'd last night via USB and now its not even connecting.
I just went and bought a bluetooth usb adapter for my lappy. i'll see if i can get it to connect/sync that way.
I can sometimes (rarely connect) but can't sync
Any other options on why I can't sync? I'm running the wing with WM6.1 and Touch Point 4.0. My OS is Vista Home Premium so I have to use Windows Mobile Device Center.
thanks.
Yes I have one option.
When you first log in to your windows profile as your desktop is loading your computer should make a small melody sound right after this connect your phone to the computer, give it a few moments you should see the small Windows mobile device center screen start up. I know it sounds weird but I had the same issues and after months of endless research I accidentally discovered this.
The bad thing is you have to restart your computer and connect on desktop loading everytime you want it to recognize your device through Windows Mobile Device Center.
Please let me knows if it works for you.
I haven't really figured out an entirely foolproof method (haven't tried BigREDD's suggestion yet), but I usually just keep plugging it in and unplugging it until it's recognized. Restart the computer with the phone already plugged in via USB. Soft-reset the phone while it's already plugged in via USB. Make sure repllog.exe is in your startup. I've never had any luck starting ActiveSync from Programs and then hitting "Sync", but maybe you will.
Help! Cant Sync No Blue Tooth Only Boot Screen
UUUUGGG! Good grief. today has been a charlie brown day. will you please help me?
must have skipped a step flashing?
the phones connected to the computer via usb and it wont sync? , no blue tooth, to make it worst its stuck on the boot screen. i think i have the correct RUU? Anyone have ideas?
I have a strange reoccuring problem with connecting my Topaz to my pc. I'm running Windows 7 64-bit and have WM6.5 on the phone.
The thing is, that I can have the phone connect to the computer for weeks several times daily always using the same USB-port, but suddenly I get 'USB Device Not Recognized'. Then I can change to a different port and it works again for a few days. Unfortunately it stops working on the next port aswell after a few days, and then it kind of decides, that it's generally unrecognizable.
I have tried almost every thing. From softresetting the phone, rebooting the pc, unplugging the pc, uninstalling and reinstalling Windows Mobile Device Center, updating USB drivers on the system, changing the cable - you name it.
All my other devices work just fine on the USB-ports.
It's as if det driver for the Topaz just gets corrupt. Then again I have actually experienced, that it just works again after some time, with no obvious reason.
I'm really starting to get desperate here. Is there any way of getting hold of a driver which can be used in this situation? Reinstalling the device Center does not work at all.
I would be very greatful if anyone could help me find a solution for this very annoying problem.
I don't know how this works in the "Windows Seven"..
But with ActiveSync in Xp i excluded the partnership and everything worked again.
I think that you have to exclude the device in Windows Mobile Device Center.
Restart your computer and try again.
Best regards!
Eduardo
One thing I had with XP was when the 'Enable faster data synchronization' in 'USB to PC' settings in Connections was checked I has a similar problem.
I unchecked it and it was fine since.
It might not help at all, but it solved the USB connection problem for me.
Well minded Steeve24!!!
Thanks for your replys.
I tried deactivation 'Enable faster data synchronization', but that did'nt change anything.
The I uninstalled the driver in Device Manager and exclude the device in Windows Mobile Device Center. After that I rebooted, mouthed the phone and waited for the driver installation but I still end up with USB Device Not Recognized.
Is it possible to force a specific driver on to this device and if so, what specific driver should i tell the system to use?
Tried switching USB port. That gave me connectivity. I reestablished the partnership, started a sync and half way through the sync, i lost connection again.
Tried once again to remove drivers, break partnership, reboot and try a different USB port. Plugged in the phone and got at complete sync. After the sync the connection closed and reopened and now I'm back to USB Device Not Recognized.
Having exactly the same issue with MDA Compact IV (aka HTC Touch Diamond) with Windows 7 (Enterprise) - 64bit!
Also tried nearly everything but still getting the "USB device not recognized" message ...
Device manager shows a "unknown device" (yellow symbol with "!"):
Windows has stopped this device because it has reported problems. (Code 43)
If tried to update the driver but then Windows 7 says:
The best driver for the following device is already installed:
Unknown Device.
It seems like C:\Windows\inf\oim24.inf is the required inf-file for installing the device. Wonder how I force W7 to use this one ...
Same issue on XP
When trying to sort my brothers TD2 on his laptop
Interesting little detail:
When I move the USB connection to a hub with external power (like the one in my screen), I seem to be able to keep the connection going for far longer then in a USB hub without external powersupply. That is defenitely different from WM6.1, which always ran smoothly on the "powerless" USB hub.
I imagine you've tried the setting which disables charging whilst connected to a PC?
Now it works again!
Yes, tied that - same difference ...
Yesterday i cleaned my computer with ccleaner and malwarebytes antimalware. The latter found and remowed 18 trojans/hijackers.
Today i connected my TD2 to a non-powered USB port and voila, connection and sync works again.
I do hope the connection is stable this time. If it gets corrupted again first thing to try is cleaning, rebooting and retrying. Of course I'll post here if the problem returns and pass on the information about the effectiveness of the above procedure.
same problem
in have a htc raphael for 1.5 years now. i made several installs of roms from your site, with active sync.
now, i have this weird problem. my htc is not recognised anymore. the error message is "Windows has stopped this device because it has reported problems. (Code 43) ".
I tried this in all usb from my laptop. after that i tried in 3 other machins, with the same result.
my laptop is Sony vaio vgn-ar51m and i am running windows 7. the ROM is EnergyROM_23081_RAPHAEL_29.Oct.2009
till now i had no problem syncing and upgrade-ing my phone with the same configuration.
any ideas, friends ?
thank you
Well, a few days ago my TD2 refused to be recognized on the nonpowered USB again. I ran Ccleaner (removing 8 GB of crap!), rebooted at voila, it connected again.
tried ccleaner, after that reboot comp reboot htc.
other setttings:
does not charge when connected to pc
enable faster data syncronization - disabled
nothing at all..
also, my phone is not connecting correctly with bluetooth also.
...i am kind of mad on raphy
found it quite trouble for me, as my T-MOBILE wizard 200 suddenly stop syncing with my PC.
even if it can't sync with PC active sync, but the phone still able to charge via USB port, anyone experience this before?
Some recommended action that i've run so far:
1. uninstall & re-install microsoft activesync 4.5
2. change usb port
3. change with different PC with activesync 4.5
4. hard reset my device
5. Change 3 different usb cable
6. etc
after doing all the thing, but the problem still there, only able to charge via USB port but can't sync
hope anyone could give me the answer is that hardware failure?.
...
I've had the same issue over and over with my Wiz110...
I don't know why this happens, but it seems to be connected with the ROM-update (USB-connection boot).
My trick was to initiate a RUU on Windows 7 (which normally ends in a stall Bootscreen!) and soft-reboot. After this the XP-driven Machine likely recognized the Wiz as what it is.
Please don't refer on this if you bricked your Wiz, but this was my solution...
hello everyone !
i was looking for thread about my problem, i saw some similar problems, solved but not working for me..
i was connected to my PC through USB cable, transfering data few times, about 5 times, than i tried to connect to transfer some more data and nothing, on my tattoo there is just sign of charging and nothing else, no asking for type of connection, there is sound on my PC (connected something through USB ) and nothing else.. i tried to manually set for storage device, put to ask me each time when i connect via USB and still nothing.. also, tried USB DEBUGGING, it says that htc is connected to PC but PC is like dead..
i'm on windows 7 if that means something, thank you for you help
pls anything ?? i have pics to transfer to PC and mp3 for tattoo but i just can't solve this out :S
I had the same problem when I just got my first android. My first guess is - you accidentally killed PC Synchronization process on your phone. Reboot should help (at least it did for me).
I had the same problem and solved it!
put pc sync into taskiller ignore list...
how can you explain me please?
goran95 said:
how can you explain me please?
Click to expand...
Click to collapse
hi
also still have this problem the sync does not happen automatically so what i do is after connecting my phone via USB i go to the USB to pc on my Phone and click on the HTC sync and then the sync happens and i can do any kinda data sync needed try doing it it work for me
USB Debugging also has to be cheked OK
i also have a Wmo Jade this does not happen it sync imm but on the tattoo it always happens and i need to do the above to get the sync working