Help with HD S2U2 skin and clock positioning - Touch HD General

I have made a skin for S2U2 to match the HD home screen including the tab bar background. However as you can see in the attached pic the clock never positions itself acuratly and is always shifting left or right depending which numbers are displayed. How can I make the numbers always lay within the boundary of the white squares? Where is the coding which tells the positioning of the numbers relative to the screen (x, y coordinates)? Or is it the png files are wrong size?
Any help would be appreciated and will share once fixed.

I Have the same problem but only with the times between 0 and 9:59..
As you can see on the Thumbnails..
I also would be very thankfull for any help..

I've done a similar thing but not for the HD (I don't have mine yet!)
On my Hermes I exeperienced the problem you're having with it not aligning at certain times of the day.
I tried it on a Touch Dual (Nike) and it works perfectly. Quite odd.
I've got a screen ready to go for as soon as I get my HD which should hopefully be next week.....

i don't have my HD yet but i think if you changed time format in the lang.ini file to HH':'mm your problem will be solved, it seems currently it is set to H':'mm !.
hope this will help.

I have tried different time formats. Same problem. Some times its in alignment and some times its not. It all depends on what time it is.

finally i have my HD and as i mentioned before just change the time format and have no problem at all!
here is my lang.ini file attched if you want to try it. after you replace your old one just go to settings and change the time format as ( HH':'mm )

can you dudes post the black hd skin ?
thanks

Related

Enlarge your today screen (how to remove the bottom menu bars)

If you're looking to get rid of the menu bar at the bottom of the Today Screen, read on. This is not a new tip, but might save you time, as there's a lot of different versions of these programs flying around. Only the one below works on WM6 / HTC Touch.
I personally find that the Menu Bars at the bottom of the Today Screen really spoil the look of the HTC Touch's sleek black/grey theme. Besides, the Comm Manager and Contacts are both accessible via the spinning cube (or the camera button if you install Double Launcher) so there's no need to have on the Today Screen, you may as well get more space for plugins, or just to keep everything looking neat and tidy. See screenshot below!
Here's how to banish them forever (?!) :
1. Download ToggleTodayIIAlpha from this link:
http://www.vijay555.com/vj/releases/vjtoggletodayii/vjtoggletodayiialpha.exe
2. Copy it to your \Windows\Startup directory. (or somewhere else and paste a shortcut instead)
3. Go into the registry and edit this key:
HKLM/Software/Vijay555/VJTodayToggle
Change these keys:
Softkeysize = 1
StartSize = 26
TrayVisible = 1
That's it! I've had no massive problems with this so far, although I haven't been testing it for too long. I'd be interested to hear how people get on in terms of stability/bugs. You WILL get problems if you try to use any of the older VJTodayToggle programs in the thread on this forum:
http://forum.xda-developers.com/showthread.php?t=243211
(SIP keyboard staying on, SIP moving to the top of the screen, menu titles disappearing but not the background, etc.)
...in fact, that's precisely why I'm sharing this info with you, as this thread is 39 pages long and it's only towards the end that things become totally clear! I'll post again if there's any unexpected side-effects, I'm currently minimising BatteryStatus and I don't know whether this will
Good luck!
Carlos
NOTES / ADVANCED
=======================
A: If you want to make your screen even neater AND still overclock your Touch, then, in step 3 above, you can make TrayVisible=0 then you can minimise the BatteryStatus plugin and it won't show up on your today screen. (right click on batterystatus icon, choose 'show rows -> minimise') I haven't tested this properly yet.
B: If you want to explore hiding the Start Menu, feel free, it looks superb when you first do it, but then I have found that the HTC biotouch (spinning cube) automatically re-instates the start menu bar when it's deactivated each time.
C: Please note, this program ( tt2.exe) DOES NOT TOGGLE, even though it's called that! Again, it's a 39 page thread, I warned you...
D: You can also run TT2.exe with a -config option to avoid editing the registry, but this would actually make the above even more long-winded to explain to any n00bs.
E: A nice new HTC wallpaper is doing the rounds without the logo. (As you can see from my screenshot, it's mis-positioned with the extra screen space) See http://forum.xda-developers.com/showthread.php?t=319830
F: Vijay555 has been meaning to release a new (non-alpha) version of the software for some time, but sounds pretty busy. He seems like an all-round splendid guy though and I'd like to thank him for this software and his continued postings/programming.
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
BigDede said:
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
Click to expand...
Click to collapse
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
carlosp_uk said:
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
Click to expand...
Click to collapse
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray (the bar just above the softkeys bar) where we can add shortcuts icons and keep the softkeys bar enabled..
Im disappointed but thks for vijay555 for all the efforts
Perfect... without HTC Logo is even better...
Thanks Carlos,
I've just installed and its working fine. With the clean background from http://forum.xda-developers.com/showthread.php?t=319830 looks even better.
Cheers,
Marcelo
BigDede said:
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray
Click to expand...
Click to collapse
See my original post, have you tried setting TrayVisible=1 in the registry, this should show the system tray.
I followed exactly what u posted, it displayed it correctly the first time, then after soft reset it was displaying only the softkeys bar and hiding the system tray bar
Thks anyway
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens.
Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
maevro said:
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens. Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
Click to expand...
Click to collapse
The menu bar is visible on other screens, this behaviour is by design. I cannot see why anybody would want it invisible on other screens, as you normally need those softkeys for menus in most programs!
As far as I know you can use the bottom of the screen, it is not dead space. But why not try it out - it's unlikely to do any harm. You can always delete it from your startup directory to uninstall if you don't want it.
C
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
V
vijay555 said:
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
Click to expand...
Click to collapse
Thks a lot vijay555
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
maevro said:
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
Click to expand...
Click to collapse
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
--Marc
soulstar said:
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
Click to expand...
Click to collapse
Just soft reset your phone.
marc2503 said:
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
Click to expand...
Click to collapse
Use the HTC Home customizer to "unlock" it. Then you can move it around like normal.
However, it doesn't redraw correctly on the right side if you unlock it, and a scrollbar comes and goes.
i have a other solution!! PCM shrink installe it and your bar remove it s very easier! For become to the original config juste delete the programmz!!
won't stick
Hi..very nice and easy Zip File..just one problem: the toggle won't stick after a soft reset = one has to go into File Explorer..double click the Toggle File and only than the screen is "clean" again.
Any way to make the toggle "stick"?
I have not this problem! I install the cab i going on the explorer and today shrink and clik on after i reboot my pda ans the bar not appear ... You can try put a abbreviated of today skrink in WINdows/started for star the application automatic on windows sartup
the result of the appl:
I have this running at startup on my Tilt, works with screen rotations and everything! And the hard keys are still mapped to calendar and contacts for quick access, awesome.
Many thanks, couldn't stand those useless soft keys before.
- Charles

Rotating Today Plugin / Home Screen?

Hi, where can i get this rotating home screen, shown in this vid:
http://www.youtube.com/watch?v=-bNtHCOpZlQ
Thx in advance!
http://www.ultimatelaunch.de/
Glad you liked my video
Anyways if you read this thread you will find lots of stuff to help you out with Ultimate Launch!
Great app!
MM
Make UltimateLaunch Full Screen
I found the best utilization of UltimateLaunch is to make it occupy the full today screen and include current today screen in it in addition to any prog shortcuts.
http://forum.xda-developers.com/showthread.php?t=365334
Full screen for me is 267 pixels under the "Fixed plugin-height" section of the Display tab. Its a great program that will even let you use your existing today plugins (like HTC Home, quicklauncher, and many more) within one of its tabs. The Youtube video above says it all.
Agreed Guys, amazing program but I require a bit of help.
I had 3 sides of a cube, and it was working perfectly even after a SR.
I added a 4th side with SPB Weather and some contacts using SmartUtilitie's Makecall.exe. and it works great until I SR then after the today screen is blank, I check the settings and UL is still checked.
Only way to get it working again is to uncheck, SR, and recheck, then it works until next SR. ANY IDEAS???? Really love this proggie.
Sometimes I faced this problem of another page appearing in the wrong place.. interesting is I can actually access that plug-in which shouldn't be there!
Sometimes I also experience redraw problem in the page. After 'rotating' it a few times, everything is back to normal.

S2U2 w/smartphone

Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
I donĀ“t know. Sorry
i think he is using the dpad function of unlocking s2u2. i think your gonna end up with issues with the looks though. just wasnt meant for a smartphone squarish screen.
Wow, everywhere I post this someone without knowledge of S2U2's capabilities tells me smartphones don't have touchscreens. Thanks for the news flash
Yes, ajk511 is right, mostly. The Q has a 320x240 screen, not square, but even if it did, the S2U2 notes say it supports square screens and smartphones. I'm looking for input from anyone who's used S2U2 with a Q or similar device and experienced or resolved this problem.
I can't tell what S2U2 will do on a Q, but it works perfectly on a Smartphone emulator, except the CallerID part. Could you provide a screenshot of what you've done? I guess you may have to prepare a separate set of wallpapers for your Q as QVGA device needs a 240x320 portrait wallpaper while your Q is 320x240.
Can't speak for the Q, but on my wife's HTC Excalibur it works flawless. I did however make a custom 320 wide by 240 high wallpaper that is running in portrait(!) mode as far as I remember. Slider is visible and working fine with the DPAD.
I can confirm that s2u2 works without problems on my Samsung i600, after I had set NoPowerSuspend to 1 (before that if my phone screeen has been turned off, it stayed off and I can unlock device only after pluging headset wire into the slot), and CallerID to 0.
Now I have one question: how can I set s2u2 to lock keypad on homescreen only?
Sorry for my English
This work in a Smartphone HTC S620?
I had a problem with my samsung i320 (landscape 320x240). S2U2 and settings start in the wrong orientation. unlock is working with DPAD, but it's impossible to use settings
Thanks for your answers
Treo 500v has the same problem.
I started with 1.01 and then 1.05, 1.22b, 1.30 and 1.32.
Always the same problem
BoZ
I guess S2U should have its own help forum. Anyways The problem I am having is that when I turn the back light off and turn it back on S2U pops up just fine but I also get an error notification "Cannot execute \Storage Card\Program Files\XMT_OnPowerOn.exe" Does anyone know if this is a S2U problem or something else?
Running on Q9
I've been running s2u2 on a Motorola Q9c for about 3 weeks now with minimal problems. I love it! I'm just trying to learn my way around some of the power management options, and figure out how to change the size/date of the date. So far so good though, I'm very impressed.
Hi, which s2u2 version are u using?
thanks
newest version works fine on HTC Ozone. Trick is you need to use mydialer to change config, its eazier that way.
I actually used S2U2 with a Pantech Matrix Pro and it worked fine. The only problem is when the screen dims, then goes to the lockscreen, then the screen shuts off, the phone shuts down immediately! Also I could not figure out how to access the settings because it was meant for a PPC. Any ideas?
Try to edit settings via registry values in HKCU\Software\A_C\S2U2
try adjusting your backlight settings, to time out longer.
UltraMagnus said:
Hey folks-
I tried posting this in the S2U2 0.99 thread but there are countless pages and I figure it was like dropping a needle in a haystack. Any smartphone users out there have any experience using S2U2 on it?
My wife's Moto Q will run it, and it will function properly, except it almost appears as if the UI is set to portrait and the background set to landscape. The landscape wallpaper is chosen, but nudged down and left so it leaves equally sized black bars on the top and right side of the screen. The rest of the UI elements look set to portrait, as they are horizontally short (guessing 240 but I don't know for certain) and the slide bar is scrolled off the bottom of the screen. The clock/curtain and the carrier info bar are properly aligned to the top left corner of the screen, but as I said they appear to be portrait as they end at approx 240px.
Does anyone out there use the latest S2U2 with a smartphone (or, better, the Moto Q specifically) and has experienced/resolved similar problems? TIA
Edit: I tried this with and without ddraw and safemode on, and I get the same results every time.
Click to expand...
Click to collapse
It works just fine on my Q..on screen shows the battery charging....i'm using S2U2 v2.41..because it's difficult to editing the s2u2 setting ( b'cause Q is not touch screen.. ) so i use my mobiler apps to control it through PC...
Ray_jai said:
Hi, which s2u2 version are u using?
thanks
Click to expand...
Click to collapse
Try this latest version 2.43 of S2U2, it really works fine on Windows Mobile Smartphone 320x240, specially for Motorola Q CDMA or Samsung GT-C6625 Valencia but settings mode cannot be access, so you should try to edit settings manually via registry values in HKCU\Software\A_C\S2U2 and goodluck...

first screen problem ...

Hi everyone !
Enjoying my Touch HD but today first problem has cropped up.
My screen can be seen below - screenshot_1.jpg and also how it has changed - screenshot_3.jpg.
Sometimes the clock changes to just numbers that do not flip over.
I did install HTCPlus! but it did not work, so I uninstalled it.
I have tried a soft reset and do not want to do a hard reset !
I have also changed pictures in settings > today, and then rebooted the Touch HD and then tried to put the original picture back..
Any ideas?
Ofiaich
yes, solution hard reset
you should be able to correct it by going settings > wallpaper > then it should ask to use default yes or no, just hit yes.
Thats how it works on the diamond, maybe its the same on the HD?
ofiaich said:
Hi everyone !
Enjoying my Touch HD but today first problem has cropped up.
My screen can be seen below - screenshot_1.jpg and also how it has changed - screenshot_3.jpg.
Sometimes the clock changes to just numbers that do not flip over.
Click to expand...
Click to collapse
sorry, but i am not sure what the problem is and how many problems you are describing:
I blieve one of the problem is that your clock's numbers don't flip over.
i am not sure what is the point of the screen shots, are you saying the background looks different (second picture has a greyish background). Please clarify so we can assist you.
Just go to settings (TFLO 3D) > Background > default background : yes or no, choose yes and the background is just normal again.
I had that problem also when i was discovering the new Touch HD phone
Hi!
sorted now, worked it out this evening...
and mwatson! you were spot on! Thanks to everyone for posting...
Ofiaich

[THE] Make a Rhodium/HTCTouchPro2 MyMobiler Skin

Hi all
(Excuse me for my very bad english, I'm french )
I would like to have a skin for MyMobiler, which looks like Rhodium devices.
I have tried the Diamond skin, but it didn't match for the screen, because the resolution is different (640x480 for the Diamond and 800x480 for Rhodiums)
The Diamond skin is available here :
http://forum.xda-developers.com/showthread.php?t=466565
I think you can easily adapt this Diamond skin for Rhodium resolution values (400x800px).
I don't know how to do this, so if someone would be able to make one, it will be a very good thing for all MyMobiler users who have a Rhodium !
Thanks !
Sam
salucsam said:
Hi all
(Excuse me for my very bad english, I'm french )
I would like to have a skin for MyMobiler, which looks like Rhodium devices.
I have tried the Diamond skin, but it didn't match for the screen, because the resolution is different (640x480 for the Diamond and 800x480 for Rhodiums)
I think you can easily adapt this Diamond skin for Rhodium resolution values (400x800px).
I don't know how to do this, so if someone would be able to make one, it will be a very good thing for all MyMobiler users who have a Rhodium !
Thanks !
Sam
Click to expand...
Click to collapse
Hi salucsam,
give me a little bit time and it is reday for the TP2. I never know that it is possible for the TP2. But i have changed some things in MyMobiler. I have a very nice grafic for that (link).
Waouw Nice skin indeed ! I've download it immediately.
Well, I think you know MyMobiler software, so if you can do a skin for MyMobiler as beautiful as the skin you made for Manila, its gona be perfect ^^ Take all the time you need !
Sam.
salucsam said:
Waouw Nice skin indeed ! I've download it immediately.
Well, I think you know MyMobiler software, so if you can do a skin for MyMobiler as beautiful as the skin you made for Manila, its gona be perfect ^^ Take all the time you need !
Sam.
Click to expand...
Click to collapse
Hi salucsam,
it is ready for 80%. But i have one problem. About the grafic is
a BMP file the background i have is white and i cant make it
transparent. Ok i have one more idea but i must test it.
At least the 4 little control button. But this i a case of time .
I love the hacking and modding stuff.
-----------------------------------------------------------------
Edit:
It is ready. A little bit quick and dirty. At this time only the background
and the zoom factor to 70%. You can change the factor in the xml file.
So be my guest and test it please....
Very good ! But.. Not perfect, as you will see on the screenshot I have take :
http://www.hostingpics.net/viewer.php?id=842663screenshot01.jpg
Now, you just have to find a solution to have a background which is at 800x400px and not 640x480 like it is on this first skin you made (the white you see under. The screen is not complete)
And to find a solution for the white corners that you can see around the application. Look on my screenshot..
I really don't know xml code, so I can't help you for this -_-
Thanks, and good luck
Sam
Hi salucsam,
look at my screenshot. It is perfect.
And here the code from the XML file:
<form
position="0 0 480 800"
backgroundimage="tp2d.bmp"
clipcolor="FF00FF">
<control
id="200"
text="MobileView"
position="44 130 480 800"
zoom="70">
</control>
</form>
As you see it is 480x800 portrait mode.
I don't know whats happend on yor system.
Please check the xml file. You can open it
with the notepad or gvim.
Ok, its good for me now, for the HTC screen.
But for corners, I really don't know how to clear it...
Look at this new screenshot :
http://www.hostingpics.net/viewer.php?id=575298screenshot2.png
As you see, the problem is those 4 black corners around the picture...I can only color them in black or white.
Do you know how to clear it ? I want them transparent, invisible.
Sam.
salucsam said:
Ok, its good for me now
Click to expand...
Click to collapse
Hi Sam, good to hear that it is working now.
As you see, the problem is those 4 black corners around the picture...I can only color them in black or white.
Do you know how to clear it ? I want them transparent, invisible.
Click to expand...
Click to collapse
The grafic is a BMP file. So there is no transparence possible. I can't change it to a PNG format because MyMobiler doesn't knows the format yet. Possible you can ask the author on http://www.mymobiler.com/.
Hi salucsam,
you found out more about your issues?
Did you guys get the hard buttons to work?
Awesome, I love this app, nice job!! still need some improvements.
I think MyMobilier need to be updated, with more skins and more functionality, but its great like is, specially WIFI
mike2nl said:
Hi salucsam,
you found out more about your issues?
Click to expand...
Click to collapse
Guys,
How do you install this to work on the tp2?
Thanks for the tip.
mike2nl said:
Hi Sam, good to hear that it is working now.
The grafic is a BMP file. So there is no transparence possible. I can't change it to a PNG format because MyMobiler doesn't knows the format yet. Possible you can ask the author on http://www.mymobiler.com/.
Click to expand...
Click to collapse
I think there is a way to get transparencies with a bmp file using an added Alpha layer to the original .bmp.
Ive been trying to get this skin to work but i can't even get it to show, any pointers?, as i can't work on the transparency if i cant test it!!
There is also a thread over on HD2 skinning my mobiler
http://forum.xda-developers.com/showthread.php?t=618050
EDIT got it to show! working on tranparency with Gimp!
I've only just noticed this thread!
I made a TP2 skin myself for MyMobiler a few weeks ago and I can tell you that MyMobiler has a bug that means the corners show when you use any other zoom level than 100% - the 'magic BMP colour' doesn't work at different levels. But, at 100% zoom, the bottom of the phone is cut off
I've tried e-mailing the MyMobiler author about these bugs a couple of times but he's never bothered to reply
iridium21 said:
I've only just noticed this thread!
I made a TP2 skin myself for MyMobiler a few weeks ago and I can tell you that MyMobiler has a bug that means the corners show when you use any other zoom level than 100% - the 'magic BMP colour' doesn't work at different levels. But, at 100% zoom, the bottom of the phone is cut off
I've tried e-mailing the MyMobiler author about these bugs a couple of times but he's never bothered to reply
Click to expand...
Click to collapse
Hi iridium, i was tried what i said above both in ginp and photoshop and although i can get the bmp to show transparent i can't get it to work on mymobiler, i have studied the HD2 thread on this and the touch pro and diamond threads, all the phone images seem to use this pinkish colour..what is this "magic colour" you speak of??! i have read what you have said about the bug and zoom etc, i am just interested to know as i spent a whole evening trying to work this one out!!!
osrix25 said:
Hi iridium, i was tried what i said above both in ginp and photoshop and although i can get the bmp to show transparent i can't get it to work on mymobiler, i have studied the HD2 thread on this and the touch pro and diamond threads, all the phone images seem to use this pinkish colour..what is this "magic colour" you speak of??! i have read what you have said about the bug and zoom etc, i am just interested to know as i spent a whole evening trying to work this one out!!!
Click to expand...
Click to collapse
Yeah, I spent a while on this too
If you have a look at defaultskin.xml, you'll see
Code:
clipcolor="FF00FF"
which is a kind of pink colour - this is the BMP colour that is treated as transparent and that's why the phone skins have that colour background in the corners. The only problem is, is that MyMobiler only shows the FF00FF colour code as transparent when it's at 100% zoom Drop down to 75% or 50% and the corners show.
Hope this explains what I've found out, please let me know if you find any more info?
iridium21 said:
Yeah, I spent a while on this too
If you have a look at defaultskin.xml, you'll see
Code:
clipcolor="FF00FF"
which is a kind of pink colour - this is the BMP colour that is treated as transparent and that's why the phone skins have that colour background in the corners. The only problem is, is that MyMobiler only shows the FF00FF colour code as transparent when it's at 100% zoom Drop down to 75% or 50% and the corners show.
Hope this explains what I've found out, please let me know if you find any more info?
Click to expand...
Click to collapse
Thanks for bringing me up to speed! ive just been testing the other skins as well and i now understand the same problem is for all, so unless you have a very tall screen it will always be the case.
I don't know about Xml but is there not a work around that we can trick the program into thinking it is displaying at 100% when it is displaying at 70? i'm guessing that would be 2 easy!!
My TP2/Rhodium Skin
I played around with this to get a skin to work. I am still having trouble with the start menu hard key, but the other buttons seem to work.
To get this skin to work, follow these steps:
1) Unzip the attached file to "\Program Files\My Mobile\MyMobiler\Skin\" directory. (It will extract to its own folder)
2) Edit the "\Program Files\My Mobile\MyMobiler\mymobiler.ini" and change the line for
Code:
SkinFile=Skin\DefaultSkin.xml
to read
Code:
SkinFile=Skin\TP2\skin.xml
slimcane said:
I played around with this to get a skin to work. I am still having trouble with the start menu hard key, but the other buttons seem to work.
To get this skin to work, follow these steps:
1) Unzip the attached file to "\Program Files\My Mobile\MyMobiler\Skin\" directory. (It will extract to its own folder)
2) Edit the "\Program Files\My Mobile\MyMobiler\mymobiler.ini" and change the line for
Code:
SkinFile=Skin\DefaultSkin.xml
to read
Code:
SkinFile=Skin\TP2\skin.xml
Click to expand...
Click to collapse
Thanks man! I just tried it out, and it works almost perfect
First, I also had to change the line below that in the options:
"Showskin=0" to "Showskin=1"...Once I did that, the skin loaded fine.
There's just one small glitch, as it looks like the image has shifted "up" in the frame...it's cut off a bit at the top, and leaves a band showing down at the bottom (I'm including a screenshot to demonstrate). Hiding the toolbar improves it a bit obviously, but there's still a bit cutoff at the top.
Zoom works great though, no "squares" in any of the ratios I've tried
The "call" and "end" hardware buttons work just fine too...but the "home" and "back" buttons don't seem to respond.
I don't know if any of the issues are related to the fact I'm running a T-mobile TP2 instead of an unbranded or AT&T model like in this skin.
Anyway, thanks again for the effort, just wanted to give you some feedback from the field
sirphunkee said:
Thanks man! I just tried it out, and it works almost perfect
First, I also had to change the line below that in the options:
"Showskin=0" to "Showskin=1"...Once I did that, the skin loaded fine.
There's just one small glitch, as it looks like the image has shifted "up" in the frame...it's cut off a bit at the top, and leaves a band showing down at the bottom (I'm including a screenshot to demonstrate). Hiding the toolbar improves it a bit obviously, but there's still a bit cutoff at the top.
Zoom works great though, no "squares" in any of the ratios I've tried
The "call" and "end" hardware buttons work just fine too...but the "home" and "back" buttons don't seem to respond.
I don't know if any of the issues are related to the fact I'm running a T-mobile TP2 instead of an unbranded or AT&T model like in this skin.
Anyway, thanks again for the effort, just wanted to give you some feedback from the field
Click to expand...
Click to collapse
Two questions really quick:
1) Which version of MyMobiler are you using? (mine is 1.25 Build 00122.0205.46)
2) Have you tried activating the skin through "View" -> "Show Skin"? Doing it this way turns off the toolbar completely leaving just the skin.
Thanks for the feedback!

Categories

Resources