iGo8 and suspend mode - Touch HD General

I can't turn off my HD when iGo8 is running, no matter if it is minimized or in background or running on screen. It will turn on again for a fraction of second then it turns off and after a second turns on again and so on. It's annoying because I cannot put it in my pocket for a while while geocaching or manipulating with phone at all.

Did you find any solution for that issue? I've the same problem, but did not found anything yet...

GPS in suspend mode
Same problem with Igo here. If I'm on battery power and use either the "Smart Power Save" or "Use device setting" in Igo device settings the device goes into suspend mode and the GPS stopps working. As discussed in this tread (http://forum.xda-developers.com/showthread.php?t=483034) this is because the GPS chip turns off in suspend mode. IGo would then turn on and off every few seconds...
I would love to run Igo with GPS working in suspend mode (to save the battery) - if anybody has a solution let me know. I've tried the mobilemagic's function to keep the GPS on in suspend mode but unfortunately it doesn't work...
P.s.: using Igo version 8.3.2.71348 (Jan 7)
PoGa

My GPS will not turn off in suspend mode, I have plenty GPS tracking sw running in background and it works well when in suspend, even iGo8. However iGo will keep flashing on screen when in suspend. Sometimes iGo8 will loose connection to GPS when resuming from suspend and must be restarted, it's just crappy software.

If you want to keep GPS chip running while Igo is in suspend mode try to add following lines in SYS.TXT file which is located in the main memory (not in SD card) My Device -> Program Files ->iGO8:
[power]
powermgm_state=0
skip_resume_process=1
skip_suspend_process=1
Or alternatively you may try this setting:
[power]
disconnect_gps_on_suspend=0
poga said:
Same problem with Igo here. If I'm on battery power and use either the "Smart Power Save" or "Use device setting" in Igo device settings the device goes into suspend mode and the GPS stopps working. this is because the GPS chip turns off in suspend mode. IGo would then turn on and off every few seconds...
I would love to run Igo with GPS working in suspend mode (to save the battery) - if anybody has a solution let me know. I've tried the mobilemagic's function to keep the GPS on in suspend mode but unfortunately it doesn't work...
P.s.: using Igo version 8.3.2.71348 (Jan 7)
PoGa
Click to expand...
Click to collapse

my GPS never turns off lol, kills battery like crazy

Related

GPS module off when display off/sleep mode

Hi everyone,
my Trinity (running very well on WM6 with latest radio ROM) interrupts any GPS logging whenever I press the power button shortly to switch off the display (which I want to do for a) power saving and b) touchscreen locking). I tried several GPS (gpsinfo, tgps etc.) applications, they all lost GPS contact and stopped logging as soon as I did the above.
Is there any way to make the Trinity still run the GPS application while switching off the display and locking the touch screen?
My goal is to be able to keep the device in my pocket while logging my track with the GPS application.
TrinityGen
Perhaps, this tool can fix your problem
http://www.freewarepocketpc.net/ppc-download-psshutxp.html
You need a tool, that can switch off only the display while youre PDA is working...

Glopus / Ozi, Display off = GPS off

Hi all,
I have the following problem on my HTC P3600 Win Mobile 5:
When I have Glopus or Ozi running and want to switch off the display (to save power while tracking the route) the GPS stops working. When I turn on the display I have to restart the GPS in Glopus and Ozi and for the time with "no display" I have no route logged.
Is there any function with which I can fix this?
Thanks very much for your input!
Michael
Hi All,
just found the solution:
If the hardware button is used to switch off the device it also takes the power from the GPS so it will stop working. There are many freeware tools (displayoff, screenlock, etc etc) which can be configured to a hardware button and will switch off ONLY the display. Result: battery saving + working GPS which is logging tracks
Regards
Michael

Turning off screen shuts down GPS

I have a problem with my Touch HD in the way that everytime the screen shuts down the GPS seems to shut down. Regardless if I Push the power button or if I let it shut down by itself.
For example if I'm recording a track it will make a straight line from the point where the screen shuts down to the point where I turn it on.
I'm using Garmin Mobile XT and Kartex (a software from the Swedish lantmäteriet).
Have been using both softwares on my old E-ten Glofiish X800 and it worked fine.
/ Magnus
I think the problem is that its not the screen that turns off, but your device is going into suspend mode.
You will need an application which prevents the suspend mode and turns just the display off.
Is there a way to keep the GPS on in suspend mode?
Is there a way to change the registry so the GPS would not shut down in suspend mode? If not, what application would you recommend to use to only turn of display but not put the device in the suspend mode?
PoGa
poga said:
Is there a way to change the registry so the GPS would not shut down in suspend mode? If not, what application would you recommend to use to only turn of display but not put the device in the suspend mode?
Click to expand...
Click to collapse
Install MobileMagic from here,
http://forum.xda-developers.com/showthread.php?t=449654
On the options tab, choose GPS while power off.
I was just about to suggest the same thing. Mobile Magic allow for GPS to work while in suspended mode. There is even a feature that automatically calls upon what ever GPS app you have to start automatically when GPS signals are detected. Pretty cool not to mention a slue of other features this nifty app has.
Thanks gadgetuk437 and band27! Great app although a little bit too "robust" as I don't need the screen rotation & all other features. I guess I will only start it when I need to use GPS.
PoGa
I am in the same boat using GPS Watch which provides a track which can be outputted to Google Earth
Is there a registry hack that will allow the GPS to continue to be operated when powered off?
Thanks
Thank you gadgetuk437 and band27 for your advice but I don´t seem to get MobileMagic to work.
I have installed it and I have choosen autostart, start hidden and GPS power when power off. Have done nothing else.
MobileMagic autostarts hidden but doesn't prevent the GPS from turning off.
I have been using screenoff but that app doesn't really work either.
I raised the question at HTC as well and got the answer that this is something that is done by design in order to reduce the battery consumption.
I just don't understand why, If I didn't want to waste power I would of course close the GPS app before i turning of the screen.
Yeah, same here. After some testing I realized Mobilemagic's function doesn't really work. Even thought I also have the function to keep the GPS on selected my Garmin Mobile XT still looses the GPS fix as soon as the device goes into standby
PoGa
I'm away to do the same...
I have Garmin Mobile XT with the Snowranger map sets for tracking my snowboarding runs. I also want to leave the phone in my pocket all day and track where I've been!
I tried it a couple of weeks ago with my Diamond whilst running. I had the music player running and Garmin tracking me - and it kept my log file (which I imported to google earth) over my whole 45min run.

GPS Turns off in sleep mode

Hello i've a question about the gps module in the diamond 2.
I sometimes use rungps on my mountainbike but when i use the button above on the hardware to turn the screen off, also my gps turns off. How can i fix this problem? Is there a solution to use gps in stand by mode or something?
I've this phone for a short time so... when people do have tips for other handy software, you're welcome
BlackMe
Just use this Tool to switch your screen off.
Weird. I use Rungps as well, but no problem so far of losing signal after pressing the button. It happens with TomTom; if I press the button, the signal is lost.

GPS turning off in some apps in sleep

All my GPS apps (OziExplorerCE, Yandex.Maps, etc) lost connection with GPS receiver after screen turned off by upper button. Only Google-maps application can work with GPS in sleep mode. Ozi and yandex has no settings that affects this... Is there some way to keep connection to gps in sleep mode for any app?

Categories

Resources