hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
First of all!!!!!!!!!
Dont POST TWICE!!!!!!!!!!
Second please explain everthing you did!
Then we can talk again!!!
Related
hey all,
any help that any one can offer would be great. First off what had happen was that I was installing a new rom onto my G3 Wizard, the after it was complete the phone restarted but didn't get passed the loading windows screen. On top of that, now when I connect my phone the to the computer activesync doesn't read the phone or charge the battery. Is there anything I could do to fix this.
Read the Wiki (XDA-Wiki). Link button at top of this screen. Look at the Wizard section on how to unbrick your phone.
HELP.. ! Here ya go..
Uhm,, Yo.. Check.. Download the Original Rom again, put the PDA in boot loader and put the original Rom on it. Then ull be able to f*.. the rom up again ^^
Where can i download the old rom. for a 8125
8152
Wich operator ?
well the phone i'm working with is an cingular 8125 but i had it unlocked to work tmobile so which one should i install
Cingular,, Duuh.. You should always get original rom of the phone's provider.. If its an Original HTC.. Get HTC.. If its Cingular.. Get Cingular,, and so on..
thanks a lot loading the original rom worked
Great
Great to hear Bud.. Keep me up on the works..
Add me MSN or something..
[email protected]
Ok i was trying to get XM6 on it. And i got the error code 300 so i tryed this other rom to make it work"ROMUpdateUtility_Wizard_NoID" and now when i turn my phone on it just go straight to the 3 color dos looking screen it shows my IPL and SPL and thats it, i cant get out of it please help me !
Thanks
If any one can help me Get XDA Moible 6.0.0.0 working on my MDA i will paypal them some $money$
My aim is deathblooms237
U are in bootloder mode. Thats fine. U didnt bricked ur phone. Now u can softreset ur mobile. By infrared eye u will see a hole and with your pen restart ur device.
BUT FIRST you have to know if u have G3 or G4 model. if your ipl/spl is 2.21.0001 - with 3 zeros than u have g4. READ ALL ABOUT G4, cause if u use rom for g3 or any rom which isnt for wizard OR ANY ROM WHICH contains IPL/SPL u are SCREWED UP. YOUR mobile will die and u could just throw it away.
SAFE ROMS for g4 are: NBD, faria, OCTAIVOI's etc. See a few on this link: http://wiki.xda-developers.com/index.php?pagename=wizard_WM_6
AND you should also read ALL about sSPL method - GREAT, FANTASTIC WAY TO FLASH YOUR G4.
http://forum.xda-developers.com/showthread.php?t=329147
Ok i should have a G4 myILP is 2.26.0001 my SPL is 2.26.0001 and when i soft restart it it goes back everytime to the boot screen the 3 color thingy. i just dont know what to do, plz pretty plz help./ Whats the next step
this is the only roms or files i have used
English Update Utility Files G4
ROMUpdateUtility_Wizard_NoID
T-Mobile-UK_2.19.11_Radinly
Wizard_Love_2[1].26.10.2_WWE_Novii_CF2
XM6r3
Try flashing your operator's official rom back into the phone to begin with. That should get you at least a working phone again.
Check the XDA-Wiki (button on top of this screen) on the Wizard section how to troubleshoot or unbrick your phone
Ok i got it back to facotry reinstalled the tmboile software from the website but to give a heads up i have cingular useing a tmobile phone so its already unlocked. ok now i need to find away to install XDA Mobile 6.0.0. now quick question is this as close i can get to the windows mboile 6 eye candy, but thanks atlist i got my phone back up and running but can some 1 tell me the files i need to get started on XDA Mobile 6.0.0.
Thanks
Ok this is what happends i tryed to install XDA Mobile 6.0.0 and put the file ROMUpdateUtility_Wizard_NoID in the folder and click ROMUpdateUtility_Wizard_NoID and it installs and when it gets done it goes right back to the 3 color screen. am i doing something wrong, reason i use ROMUpdateUtility_Wizard_NoID is because i get error 300 with out it when i try the XDA Mobile 6.0.0 normaly.
i posted this in another thread but no one replied so thought this one mite be more busy.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
please help, at least let me know if Ive got a chance of repairing it
i believe if you can get it in to bootloader mode you can flash back to original rom and start over
i thought that to but when i tryed the t-mobile rom it said "connection error" and also said it should be connected through active sync. but then agen it mite of been the wrong t-mobile rom but im sure it was for the vario ii. do you have a link to the one i should try please?
i downloaded the official UK shiping rom from t-mobile site and upgrading now through bootloader. will report on what happens.....
nope, keep getting "device not responding" or "connection error". any other sugestions?
i looked on here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick and it says that i have to "Flash any type2 radio in NBF format. If that doesn’t work, flash the radio using HERMflasher" please could someone tell me how to do this, if this is the solution to my problem or if there is another way around this. thanks.
please help someone i realy need to fix my phone
Cool down....
what's ur radio version?
Also have u read this? http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock - TRY THIS FIRST, before attempting anything else...
ok, i have tryed that "sim and cid unlocker" and i beleve that you have to connect with active-sync because when i tryed it when i was in boot loader it said that it was not connected but it was. i will get my radio version now.
EDIT: my radio version is: 0107
EDIT2: also, here are some other numbers (which i dont know what they mean but mite be needed) which apear on boot-up t-mobile splash screen, in red letters/numers, just before "no-gsm" flashes on:
M 05
S 04
B 06
D 1.21
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
berdinkerdickle said:
If you can get into the Bootloader (Rainbow Screen) you should be okay (Not a Brick)
Go download a Radio Rom from the wiki.
Enter Bootloader first, then connect to PC. Then flash the Radio Rom.
Edit, Also Read: http://forum.xda -developers.com /showthread.php?t=296722
Click to expand...
Click to collapse
ok, ill try that, does it need to be a perticular radio because im not super CID? for some reason the link will not work.
oooooo, it seems to be workin!!!!!!!!! im at...16%. ill report what happens after update finished
yes!!! it worked!! thank you very very much for your help!!!
i flashed me wizard with a new rom and it anit my first time and it worked great but just for one day after that day my wizard shut off i tryed to open it but it never prossed after the splash screen so i trid to reat the factory defolt but it says format error so i dicided to flash an new rom thro the bootloder screen coz i thought that i had a rom colabse so i flashed several roms but every time same thing habens the rom is flashed the wizard startas but nothing happen except the sblash screen and it dosn't prossed opning but the splash screen changed but stilll the same os , ipl and spl
plz some body help me plzzzzzzzzzzzz :'(
i-mate k-jam g4
Hey people,
I have got on nice MDA with ipl and spl 2.21.0001
me problem is i have no idea wath did happend to it.
the MDA starts up shows T-Mobile ... an go to the Bootloaderscreen (red IPL2.21.0001, green spl 2.2.0001, blue, with)
so i have tried to flash it now with WM5 from T-Mobil image ver 2.26.10.105 (from this nice Board here
The flash tool shows no image information of my MDA but the posibility i there to push the update button. If i do that the update tool trys to flash a few seconds and stops with error code 294 (invalid vender id). on the MDA is noch change (still bootloaderscreen)
some one of you has an idea wath could be happend to this device ?
or an idea wath can i doo ?
Yes!!!
Your problem... is NOT READ Enough!
So please read how to make a hardSPL cause your wizard is G4....
if you do it well you can upgrade whatever you want but for this time... you need to exit bootloader screen so... perform sofresets! or hardreset!
Keep reading for more chances...
You don't need to apply HardSPL or SoftSPL to flash an official stock rom.
Which language or version was working primarily on the phone before you flashed t-mobile 2.26 ?
Secondly download 'RUU_NoId' or 'RUU_MUN' and replace it with the RUU in the rom and Run the replaced RUU,hope it'll work.
Hi,
and thanks for the answers.
i do not know wath was befor on it. i have get it with the information that there was an klabel inside for the keybord not in the slot .... and after "reparing" - the mda do not boot.
up to now i have update it with orginal firmware and it runs again ... so peraps someone has talk **** to me ?! - now i think it was a bad flash
p.s. the vendor id problem was my mistake, was the wrong update