What is the maximum screen sensivity and scroll speed I can manual configure for the HD ?
(for example in Schaps Advanced Edit)
Pressure threshold (now at 18866 = normal)
Finger Pressure (now at 2908 = normal)
Scroll
High Scrolling speed is at 0 (advised 5)
low Scrolling speed at 14
Thank you for help!
Nobody know this?
I'm stuck with this to guys... I use the HD Tweak...
You can use advised settings but I still don't see the effect
Does anyone know the best way to adjust screen sensitivity??
there is a reg hack, used to be done on Athena i assume it works on all but im not sure do a search its on here somewhere
This is a good tweak,
http://forum.xda-developers.com/showpost.php?p=3222074&postcount=3
Related
Does anybody still have the original ROM installed? I installed the Touch-IT Xperience 2.1 ROM and I don't like the way it scrolls. The current settigns on this ROM makes scrolling very "sticky" (as in that the scrolling stops when my finger stops). I'd like the scrolling to have a stronger kinetic flow so that the scrolling continues depending on how fast and hard my finger moves.
If you have a the original ROM, could you install the Advanced Config app and look at the "HTC TouchFLO" settings? I'd like to know the values for:
Pressure Threshold
Finger Pressure
High scrolling speed
Low scrolling speed
Also if anybody has TouchFLO settings that they customized, I'd like to try those out as well.
Not sure if these are the original settings as I have been playing with the phone alot since I got it, but the ROM is still original... however here are the settings I have...
Pressure Threshold 2060
Finger Pressure 976
High scrolling speed 25 (default)
Low scrolling speed 70 (default)
hope this helps...
it's definitely an improvement from the previous settings.
Thanks, Shadowdh
No Problems glad to help...
Awesome, tested this and accidentally set threshold to high, the screen hardly responded after soft reset so I set it to normal thinking it'd be a good baseline to test. After reset, the screen doesn't respond at all anymore. (taking away to option to change the settings.)
Looks like I can hardreset tomorrow... when I'm back at home.
Shadowdh said:
Not sure if these are the original settings as I have been playing with the phone alot since I got it, but the ROM is still original... however here are the settings I have...
Pressure Threshold 2060
Finger Pressure 976
High scrolling speed 25 (default)
Low scrolling speed 70 (default)
hope this helps...
Click to expand...
Click to collapse
wow my phone is really responsive now. thanks alot.
i try:
regedit()
HKLM/Drivers/TouchPanel - PressureThreshold to 80866
HKLM/Software/OEM/TFLOSettings - FingerPressure to 1
Soft-Reset
It's the same of DIAMOND
I think this improve the speed reaction of touch screen
Are you really so unhappy with the standard settings? I have no problems with the response of my display, but maybe I'm just pressing hard enough .
This is a good CAB, worth a try,
http://forum.xda-developers.com/attachment.php?attachmentid=149174&d=1232643110
Got it from here,
http://forum.xda-developers.com/showthread.php?t=469865
It is just a reg tweak and easily uninstallable.
I like it.
I'm still curious about what the registry change is.
On my Diamond I set Finger Pressure and Pressure Treshold to 0 for best sensitivity. For the Xperia to be max sensitive I had to set 99999 to both Finger Pressure and Pressure Treshold.
So, what is the setting with the Blackstone?
Just do the screen calibration as gently as possible, that way you'll get a very responsive screen
fards said:
Just do the screen calibration as gently as possible, that way you'll get a very responsive screen
Click to expand...
Click to collapse
I know about that, I just want to know the optimal values so I can get it right every time with a minimum of fuss.
losdrivare said:
I know about that, I just want to know the optimal values so I can get it right every time with a minimum of fuss.
Click to expand...
Click to collapse
You can also adjust the threshhold using HD Tweak saves changing the registry
I have both set to 0 and my screen feels very responsive.
I noticed that no matter how far you try to zoom out, you can not see the entire webpage of certain sites.
Is there a reason behind this? And if so, is there a fix? Not a lot of ppl are talking about this issue.
I was really bothered by that, till last night when I managed to fix it while snooping around the registry
Lower Default Zoom (Really takes advantage of the HD2 beautiful screen)
[HKEY_LOCAL_MACHINE\Software\Opera\Prefs\Adaptative Zoom]
Default Zoom=100 (or lower value... play with it)
Hope it helps
humm weird. i still wont. webpages remain zoomed in on first entry. such as notebookreview.com. even after changing it to 100, the webpage does not fully show 100% but rather zoomed in.
** UPDATE:
changing the default zoom did not work, but right under that key was VIRTUAL screen (default 800). I changed it to 1000 and wahlah! it worked !
I now see webpages in full scale and no longer zoomed in.
This is great and should definitely appear in BsB tweak, I like it!
Hmmmmm weird, worked for me ... anyway, glad you got it sorted out. It shouldcome like that as standard really
lemonspeakers said:
humm weird. i still wownt. webpages remain zoomed in on first entry. such as notebookreview.com. even after changing it to 100, the webpage does not fully show 100% but rather zoomed in.
** UPDATE:
changing the default zoom did not work, but right under that key was VIRTUAL screen (default 800). I changed it to 1000 and wahlah! it worked !
I now see webpages in full scale and no longer zoomed in.
Click to expand...
Click to collapse
You can find this setting in about:config -> Adaptive Zoom -> Virtual Screen Width
And if you guys are interested, here are a couple other reg settings I liked:
Increase Scrolling FPS
I changed the following key to:
[HKEY_LOCAL_MACHINE\Software\Opera\Info]
PanFps=50
Increase Zooming FPS
[HKEY_LOCAL_MACHINE\Software\Opera\Info]
ZoomFps=50
These two above make a world of difference in smoothness of both scrolling and zooming on my device. Do not enter a value higher than 50 or it will not take effect (at least it did not on my HD2)
Enjoy
Thank you, thank you, thank you!
In my Kaiser, i could manage this by pressing and holding the bars to move the screen. In Leo this was impossible, so some sites were just useless to me.
TrYde said:
You can find this setting in about:config -> Adaptive Zoom -> Virtual Screen Width
Click to expand...
Click to collapse
Exactly. With "Virtual Screen Width" set to 1000 or even more, you will be able to always see the entire website.
does anyone kno9w why in certain versions of opera, when you open Google search engine, you cannot see the 'Show Options' button? (at the top -- when you click on this it allows you to hit "latest" so you get real time tweets and so on).
hklm/hardware/setting/touchpanel/hwmode=1
pls feedback if it helps you.
my HWMode value is 212 lol.. xD
try value 380 and restart your phone. then swipe the slider icon from left to right in very fast motion.
then try value 1 and restart phone. do the same thing, swipe the slider from left to right and notice the different.
value 1 can also prevent accidental lauching of quick link programs then swiping home page up / down.
this can also allow you to type faster and get the full words. (try "hehe" / "haha")
if you try both value 380 or any large value and value 1, you'll notice the difference, concluding that large value makes the screen response more retarded. value 1, being the smallest is the fastest / most responsive.
the bsbtweaks sensitivity tweak sets this key to 201, personally i like it up around 250.
using this now.. lets see.. i already like the response, lets see if it really helps
Hi all
Can a few people do me a favour and test out the following webpage on the default browser chrome:
http://www.itv.com/thismorning/showbiz/im-a-celebrity-deadly-delivery/
Note that the text is sharp.
Now scroll down so that the nav bar is no longer visible.
Does the text turn noticeably (and very blatantly) blurry/fuzzy?
If yes then chrome has a bug?
If not then I think I may have a defective screen? Haven't really noticed it in other apps yet.
I think it goes blurry for me sometimes when it is rendering
In order to be smooth when scrolling, most browsers use low resolution images when scrolling/zooming etc, then sharpen up when you stop moving (sorry about my bad terminology). Is this what is happening in your case? When mine goes blurry, it sharpens up within a few seconds.
Mine stays blurry even after its finished loading.
I also seem to have some touch screen issues. doesn't always smoothly zoom in and out when using pinch to zoom in maps, gallery, browser etc. It's as if it doesn't recognize that there's two fingers/touch points on it constantly..
They're both actually things I've tried to ignore but can't especially when the same actions on my galaxy nexus are flawless. Thought I'd check here with others to see if it's a defective unit. It's my second already..
I noticed the blurry text only on the mobile site of twitter
Yes I have this issue too. The texts remain blurry after the webpage is resized.
Sent from my Nexus 7 using Tapatalk 2
Windows registry edit - fixes Chrome text/fonts blurry/thin issue
Windows Registry editing fixed the font thickness issue for me perfectly, we can tune the font thickness/darkness by calibrating FONTSMOOTHINGGAMMA value to anywhere between 150 and 190 hexadecimal( 336 to 400 decimal )
- START -> RUN -> REGEDIT
- search for FONTSMOOTHINGGAMMA by keying " Ctrl F " ( will automatically take us to CurrentUser\ControlPanel\Desktop path)
- double-click mouse on FONTSMOOTHINGGAMMA enter anything between 150 and 190 hexadecimal.(the Lower the value, the thicker the fonts.)
- close the REGEDIT tool
- LOGOFF and then LOGON
Now all the fonts are very thick & very dark in Chrome Browser.
But we must make sure that ClearType smoothing is enabled in Windows( controlPanel -> personalization -> appearance -> Effects -> ClearType smooth check [ ticked box ] )
OR alternately in RegEdit ...
FONTSMOOTHING=2
FONTSMOOTHINGTYPE=2
FONTSMOOTHINGORIENTATION=1 for LCD-screen, 0 for CRT-screen
( Note: MicrosoftClearTypeTuner minimum GAMMA value is 1000 maximum 2200 decimal, it doesn't let us tune beyond that limit, hence the Registry tweak)