no sound plz help - MDA II, XDA II, 2060 General

ok i hAVE A TMOBILE MDA2 i used to have sound, but it stopped wotking, i just upgraded to wm6.1, but maybe there is a sound driver that i need or something? 9before i used to have wm2003) which didnt have sound eather, thats why i thought the up5grade would fix this? also before it said turn on bluetooth radio.... i have no idea what that means
if the actuall speaker piece is broken maybe someone could tell me where to buy a speaker piece? i doubt that thou..

many people exp that the headset switch inside the audio connector get stuck
and their device only play out the headset
they fix it by inserting and removing the headset from 1 to many times
which can unstick the switch
or they change the headset connector

Related

Disabling Headset

Hi to all,
as seen in my previous post my jasjar is thinking the headset is still plugged-in even if not.
Tried all, including reflashing. nothing. The fact is that in call the speaker on button doesn't work. I have no sound coming from the speaker, unless some ringtone or stranger things (playin' mp3's nothing but during play having an incoming call switch on for few seconds the mp3 song then stop starting the usual ringtone)
I know it's an electrical problem in the jack, but i was wondering if there's a possible to disable at all that jack. I was looking into the registry without luck.
The problem is that the speakers are working, it's only the jack that think is still plugged-in.
I'm not interested to use the headset so is there any way to stop JJ think about the jack connector??
any ideas?
--
so long and thank for all the fish
--
matteo
I think this is a hardware problem..
I think the jack connector has a sensor/mechanical switch that tells other hardware weather to activate headset circuits or not..
I know it's an hardware issue.
At this moment my jasjar is playin fine with a stylus inserted in the jack forcing the jack a little up.
I don't wanna send it to repair caus i have to wait a minimum of 1 month here in italy.
i wanna open my device to see what's wrong, anyone knows hot to open without problem or if it breaks the warranty?
any suggestions?
Opening your device will void your warranty!
The way I see it, there are two ways to resolve this problem:
1: Take a paperclip or a knitting neelde and do what you do with the stylus, only make the change permanent.
This may result in a broken jack connector and no way to use the headset.
2: Get it repaired (under warranty?) by a certified repairshop.
thhere is a llink in this forum to the htc technical manual . it is not easy to take apart and will void your waranty. the same happened to my phone it had to ggo back to tmobile
I've had the same problem with my Himalaya...
just jammed the headset plug back in and out, and the problem was over... Seems the tip of the plug doesn't allways correctly reenables normal audio out...

Audio not working - i'd be really grateful if anyone could offer assistance

Hi there
This is my second O2 mini-XDA. The sound on the phone doesn't seem to want to work anymore. I can't hear alarms, hear anything making phone calls. It happened once before with this phone and seemed to go away by itself. I've got some important data on the phone so I'd love to not have to send it in. Anyone have any ideas about how to sort it?
Cheers
immy
Try if you got the sounds thru a headset..
It's possible that the microswitch inside the headphone connector is stuck.
I had the same problem. When I inserted mij headphone a few times it was solved.
The microswitch is for switching of your speakers and activate your headset.
Good luck
volume bubble
tap volume icon on start bar and turn the volume to on!
I had the same issue with the original Imate XDA. There is an issue with some of the HTC phones in which the cable of the speaker is broken. The easiest way to check it is to connect a headset and then see if it is working or not. If the sound is still not working, then you will need to replace the D2A audio chip. Is your phone under warrenty?
Regards,
A very common problem - had the same problem (fortunately, my PDA is still under warranty and, therefore, it was repaired for free). The chip that switches between the wired headset and the three built-in speakers just died and had to be swapped.
Some other people also state this can also be caused by using the wired headset, which causes shortouts when you insert / remove it.

audio jack problems

hi, i got an imate jamin and i need to replace the audio jack were the handsfree pug in, do anyone know where i can find to buy this part please or if anyone had the same problem how did you solve it.
thanks guys!!
Dodgy Audio jack
My audio jack plug works fine BUT when I unplug the headset, the phone stays in headset mode i.e. no sound from the speakers. If I plug/unplug the headset a load of times it eventually goes back to normal.
Any ideas. My solution is never to use the audio jack!
Audio Jack
I've had two M600's which have done exactly the same thing, both replaced by Orange, I've now upgraded to an M700 and unlocked the old M600 with a PAYG sim and guess what that one has now lost speaker sound so that three with the same fault and this M600 has never had a headset plugged in.
Has anyone else had similar problems?
i had the same problem othillo before it broke so be carefull cause your is about to brake too, i mailed imate and they said the only way to fix it is to send it to them in dubai.. not relally keen to send it there .. but till today i havent find ther part any where it seems that imate dont send out parts ... as soon as i find an alternative i will post it here..
Is this problem caused by the connector itself or is it something else? If it is the connector I can buy a new one at the local hardware store and modify it a little bit to make it fit in my S200, probably going to replace it with an 3,5mm jack if that is possible...
it is caused by the connector in fact htc the original makers of the prophet on there new models they changed it to a usb connector for the handsfree i changed my connector many times with regulas 2.5mm connector but the sound doesnt work properly. what it does it comes out with out bass then when you push the talk button on the handsfree sound comes out good. another thing i noticed is if when you insert the jack plug in the connector and you pull it out a little bit the sound comes better and the talk button works, i know for fact cause i tried it that its not from the handsfee cause i tried it on another device and work properly. the actuall connector for them is different from what you find to buy even if you plug in normal 2.5mm headphone sound doesnt come out right . if you manage to make it work and modify the connector please post it here so who got the same prob like me can have an idea how to fix it... thanks
Audio Jack
Here is what the problem is:
Audio jacks have what is called a normally closed contact. Each contact point actually has 2 parts. In the closed (no headset) the 2 part of the contact point make contact (shorts). This enables the signal to pass through the jack to the phone speaker. When you insert a headset, the 2 points open (break contact) and signal only goes to the headset.
I'm talking from experience as a sound engineer for over 30 years and this is usually the problem 99% of the time when it comes to these type of jacks. One of the contacts (usually the ground when no sound or mic at all) breaks or can no longer "spring" back. I haven't opened mine yet but fully expect this to be the problem.
audio jack
hi jsapper, i got what you saying and your absolutly right .. the thing i replaced mine 2 times now been done by a technician who fixes phones/pdas the thing with the connectors i replaced the device doesnt work properly sound comes out with out the bass and the talk button doesnt work .. i guess that the original part got some extra connectors or most probably the pins are switched around..
do you know if there is any special connectors for them...
I have a similar pb with my S200:
After running tomtom during 2000km installed on my motorbike w/ a 2.5mm headset, sound seems to no work anymore (neither back or ear speaker), I suppose that vibrations against jack connector are responsible.
With a bluetooth or wired headset sound works.
I have soft/hard reset, upgrade to last WM5 rom, upgrade to WM6 rom, I have tried to get in/out a 2.5mm jack connector without any result.
The ring facility is working (w/ or w/o 2.5mm jack connected), so I can say that the back speaker is working.
I am looking for a solution too...
nb: I have my back speaker + screen replaced one time after 2months.
Dean.
Have you try resolder the Connector?
it was to damaged to be resolded
Hi everybody,
I aswell have this kind of problem from time to time.My solution is quite simple.You have to use the original 2,5" jack with the 3 black "dividings".(sorry for my english) This solution reduced the problem dramatically.If the problem starts now, just plug it in and out a few times and it should work again.
Cheers
Phone Jack is a mechanical mess ...
Same prob, used the headset, rear speaker dead. I opened the prophet, unsoldered the jack and found it misconstructed.
The body of the jack is plastic and not capable to withstand the forces of a plugged in headset.
There are two integrated switches - which - when headset is unplugged are closed and deliver the signal to the speaker. one of the switches does not close anymore when the headset is unplugged. My first solution was to unsolder the jack and bridge the contacts 2 and 4 as welll as 3 and 5.
The rear speaker functions now and I can use the phone.
Next step will be to find a jack solution on the market to finally solve the problem. I will keep you informed!
thanks buzzi will be looking in here... for your post!
i had the same problem with my audio jack and i searched many forums for a solution. the only thing i can say: if you really want to use it and you want go back in normal mode after unplugging, take a little needle. if you look at the audio jack (USB is left to it) you have to stick the needle in the right side of the jack somewhere an search for a little contact (the first time hard to find, the second time easy) and try to push it a bit to the left. so the prophet goes back in normal mode. it sucks but i didnt find another solution...except for buying a bluetooth headset and use software to hear music over that (for mono headsets u can use a programm calles BTAudioToggel, but make sure u use the Toggle software, because there is another one called BTAudio, it sucks because it costs money and doesn't work for me so well)
Greetz
Friends,
My prophet has exactly the same symptoms. However, I opened up the phone and carefully examined the jack. It is crap, sure, but at least on my phone it is not at fault. I tested with a continuity meter and the contact mechanism was working perfectly. Those who tried this measure without success read the following thread:
http://forum.xda-developers.com/showthread.php?t=281331
In my case it is definitely a problem with the speaker, and it seems to be eqaully common. It seems that there is more than one problem dogging the speaker of ths model.
mine's got the small contact switch problem.
it started last night! SO Annoying. Plugging a friend's original 2.5mm adapter in and out solved it temporarily. Then it went again! I have only got a 3rd party 2.5mm plug, and it took me ages to trip the small switch back with that. I have now got a BT headset on order.
Can't wait for the newer design HTC headphone adapter as I have had this problem with 5 different devices! (Tanager, Typhoon, Hurricane, Tornado and now Prophet.)
would agree with hybrid the needle trick fixed it ran media player so i could tell when it was working again. it was mentioned before that using the 2.5mm adaptor with ibky 2 rings as opposed to 3 causes this problem. I can identify with this as i have been using my dopod h/free with no problems for months i use the adaptor to plug in my headphones one time and get a eap of issues!
i will adapt a h/free to plug in some nicer headphones!
Can i use the USB connection as a handsfree port on my prophet?
Cheers
Hi, Prophet's USB is not a USB hub and thus not usable for connecting external devices - only way is bluetooth ...
thanks buzzi

Sound not working anymore! (Only through headset)

Hi everybody,
my wizard (with faria crossbow) is suddenly acting strange:
I plugged in my headset and listened to some music with media player, while i stopped listening received a call..
I've plugged out the headset but.... there's no sound coming out of the phone any more! Sound is only working through the headset... any help??
(I've tried adjusting the volume, resetting etc... without success!)
Could be mechanical damage to the headphones jack.
Try fixing it by putting a match there to unlock it.
sorry but what do you mean with: "by putting a match there to unlock it" ?
Try inserting and removing the headphone jack a few times, perhaps the contacts area bit bent and are shorting out.
well i've tried that.. doesn't work..
well suddenly after removing en inserting the jack a phew time the sound is working again... really strange but thx everbody
okeay this is really some mechinal flaw.. but its really annoying!!
While im calling and talking through the normal mic sometimes sound+mic stops working (and so the phone thinks theres a headset plugged in).
I know there is something inside the headphone jack that is not working correctly but I don't know what..
Is there a way to open the phone and fix this problem?
These things are great ! Dropped it on its head more than a few times and it still works !! Thanks to the xda-developer community for saving me having to get a new one !!
it was the headphones ;}

about back speaker...

i can't listen sounds from the back speaker of my prophet....with hands free it;s ok...the speaker got problem?
Try looking through this info in the wiki
http://wiki.xda-developers.com/index.php?pagename=Prophet Jack Problem
Speaker went off on mine while under warranty and got it fixed by HTC UK, but I hadn't seen this then.
audio jack is ok....but i can not listen sound....nothing volume is max but....
add same problem tried to replace the back speaker and still no sound
then i discovered the problem....
its very likely that its an audiojack problem.... since i had the same i could hear sound on the phones and not on the backspeaker...
the solution may sound awkward but it works like a charm.
try to plug in and out frenetically the phones and since its a connection problem you will see it will solve your problem.
never had any problem ever since
cheers
yeah
i had the similar problem & solution above is weird & right solution, try plugging-unplugging a jack and insert ur stylus in a jack port & give a 360 degree turn with soft hands...it worked 4 me

Categories

Resources