hi,
today I tried to connect my WM 6.1 X1 to my Audi A3 via bluetooth. However the X1 wasn't able to "find" the Audi MMI.
with my old HTC TYTN (WM 6.0) I had no problems.
Any ideas how I can fix this?
thanks.
I am assuming that it works in a similar fashion to my A6. Make sure that you activate discovery mode on the phone and start the 'add new device' from the bluetooth devices tab on the phone within 30 seconds of starting the car engine, as after this MMI is not visible.
If this doesn't work then try installing the JETware Hands-free Extension for Windows Mobile phones onto the phone internal memory to see if that works (you don't have to pay for the software for the first 30 days).
hi,
yes, you are right ... don't ask me why but one day later it worked finde.
Related
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.
Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...
PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM
2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.
No issues on my 5 series, but I have one of the first ULF modules in mine.
From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?
I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.
............
Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.
lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)
Hi my friends, I have problems to connect my Tytn with my Mercedes Benz bluetooth UHI interface system.
Have you notice about this bug ? I have installed Jetware test build but the problem is the same.
Thank you for your courtesy
A friend of mine had the same problem, seems you need upgrade to WM6 to fix the connection with your Benz.
Bye
I have WM6 but the problem is the same. Do you know if your friend has operated other operation ?
I have just purchased a TyTN II which won't connect with the Mercedes SAP car kit. It gets as far as finding the device but when the car kit tries to send the pairing code it fails.
Go to http://www.benzworld.org/forums/audio-telematics-forum/ and/or look on the site for your specific vehicle group such as W163 or whatever yours is.
Mercedes - Tytn integration
So it looks like one of the few options is by sending virtural cards to the mercedes thing...
Problem is that you need to do this one by one... any way to automate this? a script or something?
I would be happy already if i could synchronize, copy all my contacts to the mercedes memory every now and then...
I have an unlocked 16-key HTC Touch Dual plus a Mercedes 2007 S Class with a Bluetooth SAP profile puck in. They do not want to talk to eachother.
The Bluetooth SAP puck pairs fine with my Nokia 8800 and works wonderfully (except I don't want to use the 8800). On the HTC it discovers the phone, then displays a number I should enter. What is meant to happen is (on the rather odd mercedes UI) I then select call. With the 8800 this then brings up a bluetooth incoming pairing request on the phone, I enter the passcode, and it all works. With the HTC, the Mercedes immediately wipes the number of the screen and says "bad number".
I have got SAP Proile on (i.e. turned Remote SIM Access on within SAP settings), and obviously have the device's bluetooth both on and discoverable (or it wouldn't have been able to ascertain the Device ID). Any ideas?
Has anyone paired any WM6 device with the Mercedes Bluetooth SAP unit? (same unit in lots of cars, I'm using the European model which is apparently different from the US model).
My phone reports WM 6 Professional
CE OS 5.2.1622 (Build 18128.0.4.4)
ROM version: 1.31.405.09
ROM date: 10/31/07
Radio version: 1.58.16.27
Protocol version: 25.61.30.03H
Any ideas?
any luck?
hi, i was wondering if you had any luck connecting to mercedes sap bluetooth set, i have atom exec and trying to connect with no success.
i have applied the recommendation in this link
http://forum.xda-developers.com/showthread.php?t=282544&highlight=rsap
the number shows as you said, and does not disappear, but nothing shows on phone screen, (no request of the number)
i was wondering if any one can help
thank you
We need help !!
fawzis said:
hi, i was wondering if you had any luck connecting to mercedes sap bluetooth set, i have atom exec and trying to connect with no success.
i have applied the recommendation in this link
http://forum.xda-developers.com/showthread.php?t=282544&highlight=rsap
the number shows as you said, and does not disappear, but nothing shows on phone screen, (no request of the number)
i was wondering if any one can help
thank you
Click to expand...
Click to collapse
Hi, Any luck at all??.
I'm having the very same issue with a brand new ML and a Touch Pro.
I'm very surprise to see many people struggling with this and still no luck even from this talented group.
Thanks
bluetooth Touch Diamond 2 and Mercedes
I have exactly the same problem: HTC Diamond Touch 2 and Mercedes Benz bluetooth.
In fact the notice of MB gives a PIN of 5 digits and the HTC accepts only 4 digits!!!!
Any idea of what to do?
chrisgar2509 said:
I have exactly the same problem: HTC Diamond Touch 2 and Mercedes Benz bluetooth.
In fact the notice of MB gives a PIN of 5 digits and the HTC accepts only 4 digits!!!!
Any idea of what to do?
Click to expand...
Click to collapse
Which bluetooth device are you using : the COMAND built in one or the add-on SAP device connected to the internal BUS?
I had no problem connecting up to the first one, inlcuding outlook contact download but still struggling with the SAP device.
Weird!!
For info my ML is the latest one meaning the COMAND unit is the latest.
Hello have this pHone and it can not connect witha 2005 BMW X5 his Bluetooth modul. As soon it starts connecting and load the phonebook the Cruise resets himself .
Any tip on this
Do you try the bluetooth update for cruise available on htc e-club ?
there is no update for this
thanks for this but i looked there first amd the updates bare for differnt problems. anyway tried it, didn't helped.
BMW bluetooth
I installed the jetware something app in order to synv with my bMW, works fine