Hi there, I have tried to unlock the phone which has French SFR on it, using HTC_Trinity_SIM_CID_Unlock_v1.zip software package. but every time I try the connection is lost from the phone to the pc and the process is stopped. How can I get around this? Thanks
Active sync or USB connection? Sync button green, loaded battery? Nothing to sync? An error on screen?
Related
hi everyone, i had recenetly hard reseted my Xda Exec by accident, after that i couldn't sync with my activesync 4.1, i had delete my old relateionship plus installed activesync 4.2, but it still not working!!! the phone and pc can detect each other, but they just don't sync, both screen apperaed "syncing" and stay there for an hour. what should i do now??? i don't to type in all the number one by one again!!!
hi
I get the exact same thig here, but ave narrowed the problem down.
If I use Tweaks2k and have GPRS ALWAYS ON set to on, then I can't activesync at all, either cable or bluetooth, it just sits there looking for changes.
If I toggle GRPS ALWAYS ON to off, then it works fine.
Anyone else noticed this, or is it a known issue?
FYI, I have a o2 Exec with latest O2 ROM and am using push email
Merlin
Hey guys,
Ok this sync is really bugging me, first it took me ages to work out why when i plugged it in the connection went green ina ctive sync and said connecting but wasnt working no matter how long i gave it - turns out it was a firewal problem,
but now when i plug in my wizard and the wizard says connecting under active sync but my computer active sync doesnt do anything, i tried switching usbs restarting both PC and Wizard to no avail, i know my PC is seeing somthing there because it says at first (when i plug into new USB port) found device etc etc, but then it installs it as a network connection and trys to aquire an IP/Network address from it!! that doesnt seem right to me!
Any advice would be great
Thanks
Nathan
hmm has anyone with a working active sync noticed if its installed as a network device for you? does the wizard work as a USB - GPRS modem? because that would explain that bit.
Thanks
Hmmm...
I'm gonna guess that no one is responding because you've basically said some things that lead everyone to believe you've not researched your device or problem before starting a new thread about issues that have been covered time and again.
First, by default Windows Mobile 5 (WM5) connects using the Network Connection method. If you want to use the old USB Serial connection your will need to upgrade to an AKU 2.2 or AKU 2.3 Rom.
Second, if you use the search function (see the top center of the screen) you will find numerous threads discussing several issues with ActiveSync.
Newbies are always welcome but you need to at least try to find your answers before just plopping donw a new thread.
Hi,
I did a search, and tried most of the suggestions, but i dont get this AKU2 thing? and couldnt find a deifnition.
but anyway im since broken the phone so thanks anyway guys
Check your vpn option and firewall option. If you using cisco vpn then uncheck "statefull firewall (always on)".
hey xda..i recent down a rom for my tmo wing open-touch 3.0 for wing only i believe its called now i cant upload anymore roms because it saying it cant read the connection is the 6.1 affecting the connection?ill get error 222 i believe when i upload rom help plz thanx
Im sorry, but your post doesn't really make any sense and was kind of unintelligible.
It sounds to me like youre trying to flash a rom onto your phone but its giving you a connection error? IF that's the case, uninstall activesync, and redownload it from MICROSOFT
If that's not what you mean, Could you please try to explain it a little better?
I Think this might workout,
Start -> Settings -> Connections-> USB to PC
There uncheck the Box and it might do it.
Ghostrider
I've had a similar issue. Once doing the Hard SPL and the screen goes white, disconnecting active sync. I can never get active sync to reconnect to finish with the flashing process. I've tried uninstalling and reinstalling active sync 4.5. Unplugging and plugging usb cable back in, etc. Nothing seems to work for me on getting active sync to connect after my phone reaches the white out screen part. It shows the Wing in the Mobile Device section.I've tried going to connection settings in active sync and clicking connect...just goes through all the com ports, but nothing happens. I'm left with the only option of disconnecting and doing a soft reset. Once that happens, of course the phone connects instantly to active sync.
Keep in mind, activesync will only show connected as long as windows is running on the phone and establishing the connection between your Windows PC and Windows Mobile Device.
Throughout the flashing process, activesync may not show connected, but as long as the phone is showing up in your device manager then you should be ok... and the flashing process should work.
Hi All,
failry new memeber when it comes to posting but have been using you guys as an essential source of bugfixing, problem solving and general HTC MDA advice since my TYTN.
I have spent sometime searching but not been able to find anyone with an issue similar to mine.
So heres the thing, recently exchanged my TYTN for a TouchHD and overall extremely impressed with both the handset and dev work done on here already.
I am running Dutty's 1.7 rom coupled with Radio ROM 1.09.25.35 all has been working and syncing wonderfully, however today when i try to sync up to my laptop to upgrade the radio to 1.10.25.25 i cannot get the darn thing to connect to activesync at all.
I am running XP SP3 and activesync 4.5 (again successfully until today)
I am using a non HTC USB lead which i know is generally a no no, however i sync'd up my kaiser with this lead for over a year and have been successfuly syncing my HD until today. I have tried an alterante USB lead just in case, again one with which i had no issue on the Kaiser.
I have tried to sync with the firewall on and off, also with my AntiVirus on and off
I have tried disabling Start_settings_USB-PC "enable faster data sync" to no avail.
I have tried the cusomary uninstall and reinstall of a fresh MS downloaded Activesync again no joy.
When I connect my HD to the pc and select connection type "Disk Drive" it recognises it instantly and allows me to browse the microSD card
When i connect with connection type "ActiveSync" it opens activesync, and displays connecting for smoe time and then decides it can't connect and offers me a diagnostic scan.
I have run the scan and saved the log file for information.
so basically the laptop can see my HD, activesync recognises a device has been connected via USB but refuses to finalise the connection. Oh obviously i have tried the "connect all using the connection" setting in activesyn on the HD as well. Figure the more i can tell you about what i have and havent done now the more time it saves you guys.
Its almost as if a process or service has been stopped or deleted on the device but i am buggered if i can figure if or what that maybe.
Any help appreciated guys. Obviosuly i will as a matter of course re-attempt all the above with the official HTC USB cable when i get home, but honestly dont see this being the issue considering the history of effectiveness of these cables.
I look forward to a flurry of interesting responses for me to try. Big thanks to all those who have made my WM PDA experience spot on to date.
Dboy
Update as promised.
Have got home and tried to connect using the HTC cable but still no joy.....
What could possible have gone wrong ?
No one any ideas ??
Hello,
I got a very similar issue, after some investigation I found out that it was my calendar causing this strange connection behavior.
Please do the following test,
1. delete your phone in active sync
2. reconnect your phone with the PC using the USB cable
3. When it asks for the synchronizing options (by default contacts, calendar,E-mail, favorites & M office one Note are ticked), REMOVE the tick of the calendar.
4. After finishing the setup wizard the synchronizing process will run as expected
So in my case I'm having trouble with the calendar, why ? I don't know but maybe someone else might have an explanation.
Good Luck
I encountered similar problems with ActiveSync previously but it was solved not via a soft/hard reset of my HD, but after I reboot my PC. Hope this can help you.
Note: I rarely shutdown or restart my laptop. I simply leave it to hibernate.
Reset HD Touch to get syn again.
One day could sync next day could not.
In the end did soft reset of phone all OK now.
Think the problem is I took a photo and it took ages to save it?
Thinking of put small hole in case so I can do a soft reset without the pain of unclipping cover. Any thoughts.
Hi there,
I've got a problem with Active Sync.
I'm using Dutty's Holy grail rom, with HSPL and radio 2.07.
All works fine (except the data connection loss), but it's the second time now that Active Sync can't seem to find my phone. It's says Acitve Sync is unable to connect with the Windows Mobile device.
First time I had to hard reset my phone and it worked again. I'm hoping there is an other way to get my phone connected again with active sync, without a hard reset of my phone, since I've done lots of reg changes and installed lots of programs...
I've re-installed Active Sync, but that wasn't a solution.
Can someone help me please?
Thanx!