Database Users

HELP! WiFi/WLAN suddenly won't work anymore..

I don't know how i do this :evil:
is it a virus?
is it because my hands emerge some destroying electromagnetic radiation?
am i cursed?
i had exactly this same problem with my BA, after which i sold it..and now with my new universal?!
here's the problem:
i haven't done anything significantly different or new with my universal, but suddenly WiFi doesn't work anymore..
When i switch on WiFi in comm manager (i have the latest dutch Qtek ROM), the cursorwindows (aka sandtimer) starts running (way longer than it always used to when nswitching on WiFi), and then the WiFi icon turns green, which indicates that WiFi is switched on..BUT:
1. when i disable wisbar advance (so that i can see the actual icons in the top-right of my screen), the connection icon doesn't animate. normally the two arrows should be 'scrolling, indicating it's looking for networks/trying to connect, but nothing happens now!
2. When i open the WiFi Settings window, it DOES say 'Scanning network...' but it stays like that forever, without finding any network, which is impossible because apart from my own WLAN my neighbour's WLAN is also detectable in my house..
so..ahm..yeah..HELP PLEAZE
EDIT: the only thing new/deffernt from the situation BEFORE my WiFi-meltdown was that i installed and ran Pocket Mechanic, cleared up the notifying queue thingy and did a system and registry cleanup..dunno if this had anything to do with it though..it should be IMPROVING the performance of my universla in stead of kiling my WiFi, right..? :?

The 8125 is great but how do I fix these issues?

My 8125 is about a month old now and it is great. It’s my first experience with push email and it’s wonderful. I do have a few problems that I can not find a fix for. I have read many forums and have come to the conclusion that these features are either broke or were meant to work incorrectly.
1.) If you leave Pocket Outlook as the foreground task the 8125 will not notify you in any way that you have a new message. You have to turn the device on to check for new email. If Pocket Outlook is not running or its running in the background the phone will beep and the orange light will blink. If the phone is in standby it should notify you of a new message no matter what.
2.) The Bluetooth LED is always blinking. I always use a Bluetooth headset and it’s very common when I am driving to leave iNav GPS software running that uses a Bluetooth GPS. There is no reason for me to ever turn Bluetooth off so I do not need to be notified it is on or off. It would be nice if I could change the Bluetooth LED to notify me of voice mail or a missed call and the orange light can be used for new push email or SMS/MMS messages.
3.) When you open the keyboard it should light up. If you are in a dark room you have to open the keyboard the press a key to get it to light up. I also have not found a way to change how long it stays on for. There are a few reg hacks that claim they change the time but they do not work on my 8125.
4.) Every time I use WiFi I have to change my internet profile so it does not use a proxy. When you turn the WiFi radio on it should automatically change that info. When you turn WiFi off it should change it back automatically.
The following two have nothing to do with the 8125 but if someone has a fix it would be helpful.
5.) When you use push email your IT department can force a policy on the phone to ask for a password every 30 min of inactivity. This is a real pain if you are using a GPS. I found a reg hack that lets me change it to 24 hours but the policy gets forced on the device once a day and I have to run the reg hack again. Has anyone found a way around this?
6.) iNAV GPS Software has a bug that makes the voice navigation on all WM5 devices go very very very slow. The fix is to turn off the GPRS radio. When you do that all your push emails do not come in. iNAV claims they are working on a fix but I was curios if anyone found a way around this issue.
If anyone has any advice on these items it would be greatly appreciated.
Thanks,
SeanH

There is no fix for the keyboard light issue. It is a flaw in the way it was built and is a hardware-activated light, so registry keys won't do anything.
Sorry, but that's all I have for you.

SeanH said:
4.) Every time I use WiFi I have to change my internet profile so it does not use a proxy. When you turn the WiFi radio on it should automatically change that info. When you turn WiFi off it should change it back automatically.
Click to expand...
Click to collapse
I don't have a fix but just work around. What i am doing is to create a separate connection for wi-fi (no proxy). When you need to use wi-fi instead of gprs, you can simply select this connection from settings-->connections-->advanced-->select networks. Hence you don't have to remove the proxy settings for gprs everytime you use wi-fi. It takes a few steps but still easier than add/remove proxy settings. Hope this helps.
SeanH said:
6.) iNAV GPS Software has a bug that makes the voice navigation on all WM5 devices go very very very slow.
Click to expand...
Click to collapse
I use iNav GPS software a lot but I didn't realize this issue. It seems running perfect, voice prompt, recalculation, display... which version of iNav are you using?

SeanH said:
1.) If you leave Pocket Outlook as the foreground task the 8125 will not notify you in any way that you have a new message. You have to turn the device on to check for new email. If Pocket Outlook is not running or its running in the background the phone will beep and the orange light will blink. If the phone is in standby it should notify you of a new message no matter what.
Click to expand...
Click to collapse
I have a T-Mobile MDA (US) and use Pocket Informant v5 as the default PIM. I don't normally have PI in the foreground but haven't noticed this behavior under any circumstances.
3.) When you open the keyboard it should light up. If you are in a dark room you have to open the keyboard the press a key to get it to light up. I also have not found a way to change how long it stays on for. There are a few reg hacks that claim they change the time but they do not work on my 8125.
Click to expand...
Click to collapse
Just touch the bottom right key or the spacebar and the keyboard backlight will turn on without affecting anything else. I've heard complaints about this but I can't see why this is an issue. OTOH, the timing of the backlight is another matter, and it should be adjustable. Alas, it appears not to be.
4.) Every time I use WiFi I have to change my internet profile so it does not use a proxy. When you turn the WiFi radio on it should automatically change that info. When you turn WiFi off it should change it back automatically.
Click to expand...
Click to collapse
Mine just logs onto a network if available, and I haven't had any problems with wifi at all.
6.) iNAV GPS Software has a bug that makes the voice navigation on all WM5 devices go very very very slow. The fix is to turn off the GPRS radio. When you do that all your push emails do not come in. iNAV claims they are working on a fix but I was curios if anyone found a way around this issue.
Click to expand...
Click to collapse
I'm using iGuidance v3 and haven't noticed this, but GPRS isn't being used. I'm not sure how to enable/disable it, but in Settings > Connections > GPRS it is set to "Chap Authentication." When upgrading firmware I do not auto-load the Ext. ROM programs and have only a few loaded manually, so the GPRS functionality may not be fully implemented. Needless to say, I am not subscribing to internet service at this time.

iclick said:
Just touch the bottom right key or the spacebar and the keyboard backlight will turn on without affecting anything else. I've heard complaints about this but I can't see why this is an issue.
Click to expand...
Click to collapse
In a dark area it’s hard to see the keyboard until it lights up. I use the right arrow to get this display to light up. When you press the space bar it will enter a space in what ever app is active. Not turning the light on when the keyboard opens is a design flaw. Most people open the keyboard to use it. As soon as you press any key the light comes on so you can see the keys. It just makes sense to turn the keyboard light on when you open it so you can start typing.
iclick said:
I'm using iGuidance v3 and haven't noticed this, but GPRS isn't being used. I'm not sure how to enable/disable it, but in Settings > Connections > GPRS it is set to "Chap Authentication." When upgrading firmware I do not auto-load the Ext. ROM programs and have only a few loaded manually, so the GPRS functionality may not be fully implemented. Needless to say, I am not subscribing to internet service at this time.
Click to expand...
Click to collapse
It looks like iNavcorp is in the process of posting a fix. This is from there web site.
Patch file (for DVD version only)
This patch will correct slow voice guidance speed issue on ppc phones as well as some other minor syntex/routing errors on ppc, laptop, and umpc/car pc versions. It also includes few new features such as panning mode exit timer as well as timer reset code for ppc phone edition.
SeanH

SOS !!! Help !!! Cingular 8525 and WifFi

Folks,
I am desperate and I need help - I have had a Cingular 8525 for about a month now. Everything was going fine till Christmas day -
exactly a day after my 30 day return period :-(.
The issue is that every time I turn on Wifi, my device finds countless connections (I live in an apartment complex filled with
young professionals). From here, I go nowhere but downhill. If the phone goes to sleep while the WIFI is turned on, it does not wake up
at all. I do the only one thing that remains to be done and that is reset the phone. This time the device boots up however
the WiFi is still turned on and the phone shows a big exclamation where the bars are supposed to be. Then I get an
error "The Operation failed". Even a clear storage does not solve the issue. If I keep the phone turned off for about a day
and go to a location where there are no Wifi networks, everything is fine again.
I got Cingular to send me a Warranty Exchange device and Lo and Behold, I have the same problems with the second phone
too. I spoke with data device support and they asked me to go to a Cingular store where the device works fine as there are
no WiFi networks there.
I cannot return, cannot use my phone to the fullest extent and am in despair. Can someone tell me if there is any miracle that
I can utilize at this time. Please help !!!
p.s. - I have never installed any third party apps on the phones.

Cannot take time to answer this right now but, the answers are alraedy posted on this board. It does not sound as if there is anyting wrong with the phone except the not waking up part which is a known issue and also documented here. Also try the Wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I will check in again later
Mike

Mike,
Any help is appreciated. None of the topics below cover issues with WiFi. Once I turn on the WiFi, it will not turn off even with a hard reset or soft reset and then the phone shows the exclamation "!" !!!

Well just for starters I'm going to suggest that you DO add two applications - most importantly Magic Button
http://www.trancreative.com/mb.aspx
With this tool installed you will be able to see from the task bar what programmes are running on your device. (You may or may not know that applications that are opened and then shutdown with the X at top right corner are NOT actually closed but running in the background. Magic Button will allow you to see these and close them down - particularly Active Sync which will get in the way of your WiFi connection.
I think you are not getting any wifi connection but you are detecting networks from folks around you?? Does it detect your own network? and if so at what stage do you have a problem.
If your own network is being detected but the usual means of connecting e.g. by entering WEP key is failing then you might want to install an application called Hitchhiker http://www.kasuei.com/hitchhiker/ this application resolves various conflicts and will re-establish IP address and will allow you to enter the WEP key or even copy and paste it in. Once run and connected hopefully, you can close down Hitchhiker (if you want to) and connect to wifi by your normal route (Hitchhiker will have saved the connection information to the standard locations so you don't need to use Hitchhiker each time you want to connect) (Note you must also download and install the .Net Framework a link for which is also given on the Hitchhiker page given above)
Finally (for now) you say Wifi is on all the time even after soft reset. But you can switch it off, in more than one way. Here's one way, below the on/off switch right hand side is another hard key for the "Communications Manager" . On the screen that comes up you will see an aerial with waves radiating from it. Tapping will close and tapping again will re-open. Here you can also open and close the phone function, though I never close mine.
Mike

WiFi Issue With 9800...

my friend has a 9800 as well...
an he seems to be having a issue with his wifi...
i guess when he turns on tha little switch on the side... no icon appears
an therefor no internet access...
his phone is out tha box and other than tha task manager prog tha htc home plugin and streaming media program that i gave him hes done nothing to it...
any ideas???

I assume you mean 6800, not 9800... but anyway...
The wifi (as far as I or other people on this forum know) is a hard-switch. That means that it isn't really controllable by software, but rather when the switch is on, the wifi radio is on, and vice-versa.
If the operating system doesn't recognize that the wifi is on, it sounds like the switch might be broken. However, rather than relying on the icon to come up, try going to settings -> connections -> wifi and checking whether it can detect anything there.
Good luck!

the wifi is software controllable when the switch is on, so make sure he doesnt have any software that disables the wifi (i have SPB phonesuite on mine, and if i turn off wifi in phonesuite it doesnt come on when i flip the switch)

respect for the responses ill pass that info on to him...
*thumbs up*

Annoyances and bugs in Xperia X2 MR2-Release [Updated 3 July 2010]

Hi all!
I started again a new thread where i write down my findings in the MR2 release of the X2. It's originally on the Esato-forums, so i just put the link over here:
http://www.esato.com/board/viewtopic.php?topic=196737

Nice THKS.

7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.

Lerka said:
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Click to expand...
Click to collapse
YEp, and having the phone on silent does not make things better either...

Fix
i used registry editor and changed the value of calldrop from p(play) to none.

Rene,
when you hear 3 tones after call finish - is bluetooth activated in this moment for your x2? For example, do you use BT connection to your X2 in your car (handsfree)? Do you think that there is some special requirements for BT headset using to generate this sound on main unit if call was finished?
when you see bad power consumption results - is wifi activated in communication manager in your X2? I think that if you activate wifi - it can be reason for huge additional current if unit can't find appropriate wifi network for some reason.
For example, I found that if I activate wifi - I always should connect unit to charger every day. Then I found that this is specific issue only for me. The specific way of my wifi using is followed - I use 2 different wifi connections to my X2 (on home - secured network through router and in office - open wifi network). I do have connection issues every morning in office and every evening in home. Even if my X2 reports that it's connected to office network - I can see in status bar in Today screen that it's trying to conect again and again - and also I can't use browser or Goggle maps because no data connection is available through wifi. After I power off/on my unit - it can really connect to office wifi network and I can use browser and receive mails e t.c. When I return to home, I see that unit still be connected to office network - but it's impossile. And again - I can't use browser or receive mails by using my X2. After I power off/on unit - it can connect to home network. I can't fix issues in office and in home just turn off/on wifi in communication manager - issue still be actual after this. So, what I do every day - I turn off/turn on my unit every morning after arrive to office and again power on/ power off unit every evening when arrive home So I should spent 2 minutes every morning and 2 minutes every evening to reboot unit. On other hands I think that this is step to avoid more serious issues after couple of days of Windows using - you know usially you can see performance degradation after 1 week of using of any WinMob device - looks like this is result of lot of memory leaks, memory corruptions inside MSFT SW.
if we are talking about unexpected password issue or issue when you can't unlock unit by LOCK icon sliding left or right after press on power on button - for me it looks like memory is corrupted in MSFT lock app. As result some password is requested even if user never activates this password for lock screen. But it's clear that in reality, unit doesn't story in memory any password to compare with entered one - otherwise after power off/on sequency unit still ask password from you. But as I see in the same situation with my X2 - after I remove/insert battery and power on unit - I never see again this issue just after unit goes to Idle.
I think that memory, which is used by MSFT Lock code, can be corrupted only in scope of the same Windows process (of cause if memory is isolated for all processes in WinMob - I hope it's true) - so only other MSFT code can corrupt this memory. Do you know about any public forum where we can ask help from MSFT to see in this issue? I never see that Aaron wrote anything about any contacts in MSFT - but I think that MSFT should be also responsible for any product if Windows logo is applyed to device with WinMob?
To reduce the probability of this issue I never use AutoLock and always lock unit by click on Lock icon in Today panel or by long press on right HW kwy (with key sign).

darkbuster5 said:
i used registry editor and changed the value of calldrop from p(play) to none.
Click to expand...
Click to collapse
IT WORKED!!!
thank youuu

wifi
Hi! I have a similar issue with the wifi that PanichUS described.
The phone sees the network, tells that it's available, but I am not able to connect to it (so I can not do internet browsing, read the emails, etc.)
This happened to me while switching from one network to another, which were in two different places (and the phone was showing the network still available of the place I have already left). But in my case rebooting the phone did not help.
This is not the only case. The same thing also happens to me after I use bluetooth. The phone is connected to the wifi network (I could do internet browsing, etc.), I use bluetooth, and after that I can no more recover the connection. Again it shows that the network is available, but I can not connect to it.
The only thing which helped by now was restarting my house router.
Is the MR2 the last release of the firmware by date? I have bought my phone recently, and for me it seems that it was updated: I have radio, and the theme with grey background (X2 Titan) was activated in the very beginning.

MR2 is last update for X2. Don't wait another update.
Try turn off Wifi in Communication manager before power off and turn on Wifi back in Communication manager after power on.

Wifi
I have discovered that in fact I don't have problem to connect when using an open network, while with the protected one is always an issue.
Reboot of the phone doesn't change anything even if before doing it I switch off wifi in the connections manager and delete all the settings. Nothing - only reset of the router what helps.
I also tried to use other software (Wifi Monster) - the same thing.
The phone is really wonderful, it really has it's spirit with all these panels and generally the interface, but the wifi issue is really annoying!

My advice - don't install Resco Photo manager on X2.
Great app but works very bad on X2.

I instaled older version Resco.Photo.Manager 7.03. This work good.
Wisbaradvance 4.05 is verry unstable,problems and problems.