I don't know how i do this :evil:
is it a virus?
is it because my hands emerge some destroying electromagnetic radiation?
am i cursed?
i had exactly this same problem with my BA, after which i sold it..and now with my new universal?!
here's the problem:
i haven't done anything significantly different or new with my universal, but suddenly WiFi doesn't work anymore..
When i switch on WiFi in comm manager (i have the latest dutch Qtek ROM), the cursorwindows (aka sandtimer) starts running (way longer than it always used to when nswitching on WiFi), and then the WiFi icon turns green, which indicates that WiFi is switched on..BUT:
1. when i disable wisbar advance (so that i can see the actual icons in the top-right of my screen), the connection icon doesn't animate. normally the two arrows should be 'scrolling, indicating it's looking for networks/trying to connect, but nothing happens now!
2. When i open the WiFi Settings window, it DOES say 'Scanning network...' but it stays like that forever, without finding any network, which is impossible because apart from my own WLAN my neighbour's WLAN is also detectable in my house..
so..ahm..yeah..HELP PLEAZE
EDIT: the only thing new/deffernt from the situation BEFORE my WiFi-meltdown was that i installed and ran Pocket Mechanic, cleared up the notifying queue thingy and did a system and registry cleanup..dunno if this had anything to do with it though..it should be IMPROVING the performance of my universla in stead of kiling my WiFi, right..? :?
Related
I am a Vario II user on T-Mobile in the UK (is it healthy to love your phone?).
It connects to the Net flawlessly using either 3G or GPRS. But if I disconnect from the Net (by pressing the red phone key a couple of times - the 3G/G icons disappears) then I am unable to connect again - sometimes until I switch off my device (a "hard" switch off) or at least for several hours.
Is this normal behaviour? Should I disconnect from 3G/GPRS or just leave it connected? If I do disconnect (it saves battery life and reduces heat in the device), how do I reconnect?
Thanks in anticipation of a reply.
bobbyelliott said:
I am a Vario II user on T-Mobile in the UK (is it healthy to love your phone?).
It connects to the Net flawlessly using either 3G or GPRS. But if I disconnect from the Net (by pressing the red phone key a couple of times - the 3G/G icons disappears) then I am unable to connect again - sometimes until I switch off my device (a "hard" switch off) or at least for several hours.
Is this normal behaviour? Should I disconnect from 3G/GPRS or just leave it connected? If I do disconnect (it saves battery life and reduces heat in the device), how do I reconnect?
Thanks in anticipation of a reply.
Click to expand...
Click to collapse
No, its not normal behaviour - I have a Vario II on T-Mobile UK and it connects and disconnects perfectly. Unless you have fiddled with the registry, I don't think it should be necessary to disconnect manually - there is an inactivity timeout and it will drop the connection automatically after a while.
Have you loaded any non-standard software? Before getting my Vario II, I had a T-Mobile MDA and it suffered the symptoms you describe with some non-standard diallers loaded...
Martin
The only software that I can think of is Skype (for Pocket PC) and I don't think that that's the problem. And I haven't "fiddled" with anything in the registry.
Maybe I just shouldn't disconnect from the Net and let it go down "naturally" as you say you do. This seems to drain the battery but it's preferable than being permanently disconnected.
Don't suppose there is an alternative way of resetting the comms without physically switching off my device (this always clears the problem - until the next time!).
bobbyelliott said:
The only software that I can think of is Skype (for Pocket PC) and I don't think that that's the problem. And I haven't "fiddled" with anything in the registry.
Maybe I just shouldn't disconnect from the Net and let it go down "naturally" as you say you do. This seems to drain the battery but it's preferable than being permanently disconnected.
Don't suppose there is an alternative way of resetting the comms without physically switching off my device (this always clears the problem - until the next time!).
Click to expand...
Click to collapse
Well, on the few occasions I have had a connection problem, turning off the phone section via the top-right button in the communications manager and back on again has solved it...
Martin
mab981 said:
Well, on the few occasions I have had a connection problem, turning off the phone section via the top-right button in the communications manager and back on again has solved it...
Martin
Click to expand...
Click to collapse
Thanks for this. I'll give it a try.
In the meantime, I've left my 3G/GPRS connection running - how long should it take before it drops "naturally"? I last used my device about 4 hours ago but it's still connected!
Hmmm, I must say that the timeout does seem much longer than it was with WM2003 on a Magician - I cannot see too much of a pattern to it, I'm afraid.
Martin
Problem solved!
I stopped all running programs - and I could disconnect and reconnect! I guess it was one of my programs. I will experiment to see which one was causing the problem. Most likely candidate is Skype. But I also regularly run Fizz Traveller, which might also cause the problem.
It's Skype
Skype is the problem. If I stop this program running I can reconnect to 3g/GPRS without problems. If I run it and try to connect - nothing. Don't know if Skype is aware of this issue?
Folks,
I am desperate and I need help - I have had a Cingular 8525 for about a month now. Everything was going fine till Christmas day -
exactly a day after my 30 day return period :-(.
The issue is that every time I turn on Wifi, my device finds countless connections (I live in an apartment complex filled with
young professionals). From here, I go nowhere but downhill. If the phone goes to sleep while the WIFI is turned on, it does not wake up
at all. I do the only one thing that remains to be done and that is reset the phone. This time the device boots up however
the WiFi is still turned on and the phone shows a big exclamation where the bars are supposed to be. Then I get an
error "The Operation failed". Even a clear storage does not solve the issue. If I keep the phone turned off for about a day
and go to a location where there are no Wifi networks, everything is fine again.
I got Cingular to send me a Warranty Exchange device and Lo and Behold, I have the same problems with the second phone
too. I spoke with data device support and they asked me to go to a Cingular store where the device works fine as there are
no WiFi networks there.
I cannot return, cannot use my phone to the fullest extent and am in despair. Can someone tell me if there is any miracle that
I can utilize at this time. Please help !!!
p.s. - I have never installed any third party apps on the phones.
Cannot take time to answer this right now but, the answers are alraedy posted on this board. It does not sound as if there is anyting wrong with the phone except the not waking up part which is a known issue and also documented here. Also try the Wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I will check in again later
Mike
Mike,
Any help is appreciated. None of the topics below cover issues with WiFi. Once I turn on the WiFi, it will not turn off even with a hard reset or soft reset and then the phone shows the exclamation "!" !!!
Well just for starters I'm going to suggest that you DO add two applications - most importantly Magic Button
http://www.trancreative.com/mb.aspx
With this tool installed you will be able to see from the task bar what programmes are running on your device. (You may or may not know that applications that are opened and then shutdown with the X at top right corner are NOT actually closed but running in the background. Magic Button will allow you to see these and close them down - particularly Active Sync which will get in the way of your WiFi connection.
I think you are not getting any wifi connection but you are detecting networks from folks around you?? Does it detect your own network? and if so at what stage do you have a problem.
If your own network is being detected but the usual means of connecting e.g. by entering WEP key is failing then you might want to install an application called Hitchhiker http://www.kasuei.com/hitchhiker/ this application resolves various conflicts and will re-establish IP address and will allow you to enter the WEP key or even copy and paste it in. Once run and connected hopefully, you can close down Hitchhiker (if you want to) and connect to wifi by your normal route (Hitchhiker will have saved the connection information to the standard locations so you don't need to use Hitchhiker each time you want to connect) (Note you must also download and install the .Net Framework a link for which is also given on the Hitchhiker page given above)
Finally (for now) you say Wifi is on all the time even after soft reset. But you can switch it off, in more than one way. Here's one way, below the on/off switch right hand side is another hard key for the "Communications Manager" . On the screen that comes up you will see an aerial with waves radiating from it. Tapping will close and tapping again will re-open. Here you can also open and close the phone function, though I never close mine.
Mike
Hey,
I'm experiencing a strange problem with my hermes.
The device wakes up often without a reason. The effect is the following:
. device wakes up
. the connectivity icon changes from 3G to H, means HSDPA connection built up
. spb gprs monitor shows different amount of data transfers
If I close the data connection manually with the red hook on button, the effect doesnt appear any more. So I guess this in an inbound connection made to my device. But how can that be???
Does WM wakes up on inbound connections? How can I find out, which data is being transfered? Are there any network monitoring tools for WM?
Is it right, that to wake up the device from a program that makes an outbound connection an entry in the notification list has to exist? There is nothing. No notification that could wake up the device.
Need help!
Device seeks automatically the strongest signal around. If you stay in an area with both types of signal you will find frquent flipping in and out of 3g UMTS. You may not have experienced this but it can also lead to the dropping of calls also.
You can use Danielherrerro's bandswitch application aka commmgrpro that allows you to easily choose which bands to turn on off.
Mike
I think you misunderstood.
Chaning the band doesnt normaly lead to download traffic.
Btw. I selected gsm instead of gms & umts in the phone options, so the device cant switch. Still waking up and producing some traffic. This effect wasnt there til last week.
Mine does this because it checks for mail every 15 minutes, do you have mail scheduled???
good luck.
Oggy.
LaroCroft said:
I think you misunderstood.
Chaning the band doesnt normaly lead to download traffic.
Btw. I selected gsm instead of gms & umts in the phone options, so the device cant switch. Still waking up and producing some traffic. This effect wasnt there til last week.
Click to expand...
Click to collapse
My bad. Ogier is right, it must be an app. that's connecting - possibles include:
Mail
Weather apps
Sync apps - time sync etc
Mike
Gprs Today Plugin
<seems like an 'in-topic' post>
anyone have any good suggestions on a today-plugin that shows wifi/gprs connection? My theme does not show the connection icon (3g,g,e,etc.), so I was looking for somethig that would show with conenction I was using as a today plugin. Something like the one shoen here in custels rom.
I would use spb gprs monitor, but for some reason all spb applications show this really annoying this line at the top of my screen, so I have given up on spb. any other ideas short of dumping custels ROM? thanks
Definitly dont think thats an application
Problem occurs only if a data connection is still active. If I disconnect manually no wake up occurs.
Seems device is waken up from an external source?!
I've done a search, but can't find any way to get a plug-in for the Today screen where I can switch wireless, etc, on or off...
Any ideas or recommendations?
I must admit, that would be handy
Having to click the signal icons at the top of the screen, then a specific one, wait for a second for it to tell me there is no wireless connection (yes - I know! - it's becuase you went to sleep becuase I ignored you for a minute, so you turned yourself off and turned off the pigging wireless connection for me! ), and then click comms manager...
is indeed a PITA
Just found http://www.paulbdesign.com/effcomm/ which appears to work on a WM6 screen (i.e. not TouchFLO).
However it doesn't have GPRS which is my main concern as I can never tell how much data I'm using and I'm paranoid it'll be doing stuff...
Hi all!
I started again a new thread where i write down my findings in the MR2 release of the X2. It's originally on the Esato-forums, so i just put the link over here:
http://www.esato.com/board/viewtopic.php?topic=196737
Nice THKS.
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Lerka said:
7. When hanging up a phonecall, the phone makes three loud beeps via the rear speaker. WHY???
same here... but only if the person u talk to hangs up first. its so annoying.
Click to expand...
Click to collapse
YEp, and having the phone on silent does not make things better either...
Fix
i used registry editor and changed the value of calldrop from p(play) to none.
Rene,
when you hear 3 tones after call finish - is bluetooth activated in this moment for your x2? For example, do you use BT connection to your X2 in your car (handsfree)? Do you think that there is some special requirements for BT headset using to generate this sound on main unit if call was finished?
when you see bad power consumption results - is wifi activated in communication manager in your X2? I think that if you activate wifi - it can be reason for huge additional current if unit can't find appropriate wifi network for some reason.
For example, I found that if I activate wifi - I always should connect unit to charger every day. Then I found that this is specific issue only for me. The specific way of my wifi using is followed - I use 2 different wifi connections to my X2 (on home - secured network through router and in office - open wifi network). I do have connection issues every morning in office and every evening in home. Even if my X2 reports that it's connected to office network - I can see in status bar in Today screen that it's trying to conect again and again - and also I can't use browser or Goggle maps because no data connection is available through wifi. After I power off/on my unit - it can really connect to office wifi network and I can use browser and receive mails e t.c. When I return to home, I see that unit still be connected to office network - but it's impossile. And again - I can't use browser or receive mails by using my X2. After I power off/on unit - it can connect to home network. I can't fix issues in office and in home just turn off/on wifi in communication manager - issue still be actual after this. So, what I do every day - I turn off/turn on my unit every morning after arrive to office and again power on/ power off unit every evening when arrive home So I should spent 2 minutes every morning and 2 minutes every evening to reboot unit. On other hands I think that this is step to avoid more serious issues after couple of days of Windows using - you know usially you can see performance degradation after 1 week of using of any WinMob device - looks like this is result of lot of memory leaks, memory corruptions inside MSFT SW.
if we are talking about unexpected password issue or issue when you can't unlock unit by LOCK icon sliding left or right after press on power on button - for me it looks like memory is corrupted in MSFT lock app. As result some password is requested even if user never activates this password for lock screen. But it's clear that in reality, unit doesn't story in memory any password to compare with entered one - otherwise after power off/on sequency unit still ask password from you. But as I see in the same situation with my X2 - after I remove/insert battery and power on unit - I never see again this issue just after unit goes to Idle.
I think that memory, which is used by MSFT Lock code, can be corrupted only in scope of the same Windows process (of cause if memory is isolated for all processes in WinMob - I hope it's true) - so only other MSFT code can corrupt this memory. Do you know about any public forum where we can ask help from MSFT to see in this issue? I never see that Aaron wrote anything about any contacts in MSFT - but I think that MSFT should be also responsible for any product if Windows logo is applyed to device with WinMob?
To reduce the probability of this issue I never use AutoLock and always lock unit by click on Lock icon in Today panel or by long press on right HW kwy (with key sign).
darkbuster5 said:
i used registry editor and changed the value of calldrop from p(play) to none.
Click to expand...
Click to collapse
IT WORKED!!!
thank youuu
wifi
Hi! I have a similar issue with the wifi that PanichUS described.
The phone sees the network, tells that it's available, but I am not able to connect to it (so I can not do internet browsing, read the emails, etc.)
This happened to me while switching from one network to another, which were in two different places (and the phone was showing the network still available of the place I have already left). But in my case rebooting the phone did not help.
This is not the only case. The same thing also happens to me after I use bluetooth. The phone is connected to the wifi network (I could do internet browsing, etc.), I use bluetooth, and after that I can no more recover the connection. Again it shows that the network is available, but I can not connect to it.
The only thing which helped by now was restarting my house router.
Is the MR2 the last release of the firmware by date? I have bought my phone recently, and for me it seems that it was updated: I have radio, and the theme with grey background (X2 Titan) was activated in the very beginning.
MR2 is last update for X2. Don't wait another update.
Try turn off Wifi in Communication manager before power off and turn on Wifi back in Communication manager after power on.
Wifi
I have discovered that in fact I don't have problem to connect when using an open network, while with the protected one is always an issue.
Reboot of the phone doesn't change anything even if before doing it I switch off wifi in the connections manager and delete all the settings. Nothing - only reset of the router what helps.
I also tried to use other software (Wifi Monster) - the same thing.
The phone is really wonderful, it really has it's spirit with all these panels and generally the interface, but the wifi issue is really annoying!
My advice - don't install Resco Photo manager on X2.
Great app but works very bad on X2.
I instaled older version Resco.Photo.Manager 7.03. This work good.
Wisbaradvance 4.05 is verry unstable,problems and problems.