3D Benchmark Results... - Touch HD General

I used the Dynamix 3D Benchmark which you can download here
My Results for Touch HD:
Average FPS: 65,64
Min FPS: 21
Max FPS:71
Comparing to my XDA Trion:
Average FPS: 37,73
Min FPS: 20
Max FPS: 40
.
Edit: I noticed, that i get the worst results direct after soft-reset and the best result with low screen backlight.

Related

ondemand vs userspace vs performance on cm6

these are my results on cm_supersonic-07212010-003638.zip oc'd to 1152:
ondemand
fps2d:
46 - 11.736
50 - 9.70
50 - 8.75
linpack:
38.122
36.089
36.577
37.855
37.593
34.48
quadrant:
1159
userspace
fps2d:
53 - 5.56
53 - 5.26
53 - 5.43
linpack:
39.084
41.964
40.398
40.398
42.963
42.625
quadrant:
1530
performance
fps2d:
53 – 5.81
53 - 04.56
54 – 4.51
linpack:
40.398
40.099
40.398
39.804
44.011
40.398
quadrant:
1555
What does "userspace" do. I always just use ondemand.
Sent from my PC36100 using XDA App
jkinnison90 said:
What does "userspace" do. I always just use ondemand.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
this please !!
I wondered too but never asked
Sent from my PC36100 using XDA App
In general, I think a userspace governor allows an application running within the userspace (an application that you launch) to set the speed of the CPU instead of allowing the system to do it. That's my understanding. Could be wrong though.
i get the same low results with ondemand if i have my min set below 384. at min set to 384 and up i get the same results on ondemand as i get on performance setting. 243 is just too low for a good frame rate. i'm guessing the cpu and gpu clocks are linked.

Complete benchmark test

Complete benchmark completed.
How did I do this test? I runned each benchmark 3 time's and calculated the average score. (test1+test2+test3÷3= End result)
Energy saving was not enabled.
Wi-fi was enabled
Datatrafik was enabled (3G)
Auto adjust screen tone was not enabled.
Monjori: 33FPS
Electopia: 43FPS
nenamark2: 58FPS
M3D: Does not start up. (not compitable?)
Basemark ES 2.0 Taiji: 42fps
BenchmarkPi: 327
Linpack: 65MFLOPS
CF-Bench: 15180
Vellamo: HTML5: 1814 + Metal: 619 = 2433
Sunspider (stock webbrowser): 1017 +/- 0.5%
Rightware BrowserMark: 174584
AndroBench storage benchmar: Sequential read speed: 37.85 MB/s, Sequential write speed 9.74 MB/s.
Phew... some test's take a hell load of time to do.
Sent from my GT-N7100
Nice!! Btw, I think you gotta try the the Linpack in multi-core test, too. It should show score of more than 150+ MFLOPS, may reach even 250!!!
CrimzonEyed said:
Complete benchmark completed.
How did I do this test? I runned each benchmark 3 time's and calculated the average score. (test1+test2+test3÷3= End result)
Sent from my GT-N7100
Click to expand...
Click to collapse
That's not something I would do.
say (3+3+3/3)=7 and that's not average.
it should be ([test1+test2+test3]÷3= End result)
You mean do the "+" math and "=" before using "÷"?
Because thats how I did.
Sent from my GT-N7100

Very high temps when gaming/benchmarking are these normal?

Before I call up EE and ask for a replacement I would just like to check if these temps are normal and if anyone else can run the same test and check what there temp gets to on the Note 4.
Firstly my Note 4 idles at around 36 degrees C which is pretty normal from what I can see. When running the Epic Citadel Benchmark on max Quality the Temperature reached a very hot 77 degrees C before I decided to stop it and shut it down.
It also reaches temps above 70 degrees C in Grand Theft Auto Vice City aswell on max settings.
Could a couple of you guys with the Note 4 please download and run the Epic Citadel Benchmark.... and use the CpuTemp app to measure the CPU temp while its running. This app has an overlay feature so you can watch the temp while the benchmark is running and I would love to know what the max temperature is that it reaches during it so I know if my phone is normal or faulty.
I get a score of about 52fps but the temperature just seems to high to me even though my idle temp is normal.
it would be very much aprechiated thank you.
That sounds about right. I just downloaded it and ran the benchmark on High Performance and got 56.4 FPS avg and the temp was around 52 degrees (started at idle, which was about 35, 36 degrees). Actually it basically spent most of its time during the benchmark at 1.5 GHz and just over 50 degrees. Then I let it cool down a bit and ran it again on Ultra High Quality and got a 48.9 FPS avg and the temp was around 77-78 degrees, spiking to around 80, but even at 80 degrees it was still fully clocked at 2.7 GHz.
But at least for me I notice even when using a couple pop up windows to play a youtube video (music, static image) while browsing Facebook and having Messenger chat heads up that the phone heats up quite a bit, going towards and around 70 degrees the more FB posts I go down and I can see it mostly around 1.5 GHz but it's still stuttery. I use CPU temp and frequency in status bar from XPosed Framework so I did have to keep dragging the status bar down to check. I'm curious what the scrolling performance would be like using ART instead but I'd have to give up XPosed and I don't think I'm ready to do that yet.

speed tests, cpu-id, benchmarks ~ results

while some of this info can be found, I'm going to try to be as thorough as possible....
I'm posting this so you don't have to
speedtest .net
shows I'm running at full speed
45 Mbs down
6 Mbs up
as to be expected, but trying to be thorough
CPU-ID (from CPU-z)
this link shows most of the info I'll type the rest out myself
http://valid.x86.fr/a/e76tnv
missing info that might be helpful to someone
Scaling Govenor - hotplug
Model - KFFOWI (Full-ford)
board - Ford
Hardware - mt8127
RAM - 867 MB
Available RAM 297 (34%) --
"not running anything and have rebooted once, so FIRE OS is eating up the rest of the ram"
battery 4177 mV
thermals
mtksabb 120°F
mtktsbattery 102°F
mtkts_bts 110°F
mtktspmic 118°F
battery 103°F
mtktscpu 120°F
mtktsmt 110°F
virtual_sensor 100°F
well that's all for cpi-id.. i know some of the info is useless ....
NOTES
CPU's
i notice it stops cores 2 and 3
but i never notice it stopping 0 and 1
them 2 are always running at 598 MHz with just the screen on
take these for what you think they are worth
Quadrant benchmark
score 5736
in the video test no skips and a minimum (only once) of 58 a high of 63 FPS almost a constant 59-60 FPS
AnTuTu benchmark
score 23,603
for comparison
nexus 6 over - 50k
Galaxy Note 4 - 48k
3dMark
score 3332
My score, for 50 bucks "Priceless"
Ricci
a1yet said:
...
CPU's
i notice it stops cores 2 and 3
but i never notice it stopping 0 and 1
them 2 are always running at 598 MHz with just the screen on...
Click to expand...
Click to collapse
It's probably a big.LITTLE implementation.
https://en.wikipedia.org/wiki/ARM_big.LITTLE
http://www.mediatek.com/en/products/mobile-communications/tablet/mt8127/
Also, the cpu cannot be throttled below 598 MHz it seems.
---------- Post added at 03:12 AM ---------- Previous post was at 03:04 AM ----------
Some interesting info here
https://developer.amazon.com/appsan...ications/01-device-and-feature-specifications

Drop in fps while playing games like fifa and asphalt

Hello i am having issue with especially when playing fifa 16 the fps drops after 10 min of gaming.Like first 10 min it runs on 30-32 fps and after 14-15 fps.Well is this due to the gpu temp limiter or some other thing?Tested this on s6 it was running smoothly.

Categories

Resources