Database Users

change JogWheel behavior

Hello,
Just got my TyTn and got a question.
If i got a long email (about 34k just plane text) this is a lot of text.
With my tytn and the jogwheel it is possible to scroll down a page (or scroll up a page of course)
I was wondering, is there a way to make this shorter, so that the jogwheel doesnt schroll a complete page, but a half a page or maybe just 3 lines.
When i read a complete page the backight of my tytn turns dark.
Reminder: i do not want to change the settings in backlight! this is exactly the way i want it, but when i scroll more often the backlight stay on.
Please help
I hope it is possible.
Paul

Anyone have any solution to this?
It's bothering me too.
Thanks

Not only that problam bothering me...after installing the aebutton plus now my ok (Side One) button doesnt bring down the start menu any more and sometimes my green dialar button doesnt work too....does....i have tried uninstalling the aebutton plus...but stll im facing the probs...does there have anyway to retrive it to its default behaviour without hard reseting....i tried the button menu from setting but seems this button is not listed there...
any help will be apprecieted...

ghozd said:
Hello,
Just got my TyTn and got a question.
If i got a long email (about 34k just plane text) this is a lot of text.
With my tytn and the jogwheel it is possible to scroll down a page (or scroll up a page of course)
I was wondering, is there a way to make this shorter, so that the jogwheel doesnt schroll a complete page, but a half a page or maybe just 3 lines.
When i read a complete page the backight of my tytn turns dark.
Reminder: i do not want to change the settings in backlight! this is exactly the way i want it, but when i scroll more often the backlight stay on.
Please help
I hope it is possible.
Paul
Click to expand...
Click to collapse
Been playing around with my new TyTn also. I'm about to install all the software I had on my Wizard, when I was using my Wizard, Tweaks2k2 had an option for smooth scrolling, I'll see if it will change anything.

sajib said:
Not only that problam bothering me...after installing the aebutton plus now my ok (Side One) button doesnt bring down the start menu any more and sometimes my green dialar button doesnt work too....does....i have tried uninstalling the aebutton plus...but stll im facing the probs...does there have anyway to retrive it to its default behaviour without hard reseting....i tried the button menu from setting but seems this button is not listed there...
any help will be apprecieted...
Click to expand...
Click to collapse
Make sure you turn off the volume adjustments that are assigned by default to Button #4075. After doing this my buttons function normally allowing me to call the start menu from the side button and the volume calls are eliminated.

aadadams said:
Make sure you turn off the volume adjustments that are assigned by default to Button #4075. After doing this my buttons function normally allowing me to call the start menu from the side button and the volume calls are eliminated.
Click to expand...
Click to collapse
Which software ur refering to??? AEButton Plus?? Coz i Cant find button #4075 in the button list...

sajib;1025213 said:
Which software ur refering to??? AEButton Plus?? Coz i Cant find button #4075 in the button list...
Click to expand...
Click to collapse
I use the latest AEBPlus. If you use the add button function you can add the OK buttons and retain the start menu actuation via the side OK button while making those buttons actually close applications.

aadadams said:
Make sure you turn off the volume adjustments that are assigned by default to Button #4075. After doing this my buttons function normally allowing me to call the start menu from the side button and the volume calls are eliminated.
Click to expand...
Click to collapse
How do I turn of the volume adjustments?

thewall;1025614 said:
How do I turn of the volume adjustments?
Click to expand...
Click to collapse
Under Options>Volume Adjustments make sure all entries are NOT checked.

aadadams said:
Under Options>Volume Adjustments make sure all entries are NOT checked.
Click to expand...
Click to collapse
Hmmm, strange. i can't seem to find that option under options. We are talking about options in AEBplus right? Only thing that says volume on it is "restore volume slider". Is this the one I should uncheck all items?
Thanks for helping out dude.

thewall said:
Hmmm, strange. i can't seem to find that option under options. We are talking about options in AEBplus right? Only thing that says volume on it is "restore volume slider". Is this the one I should uncheck all items?
Thanks for helping out dude.
Click to expand...
Click to collapse
That's the correct name. I was coming from my memory. There are three options in there make sure none are checked.

Thanks for helping out aadadams. Still having problems though. After a while the windows button won't open start menu and neither will ok button on the side of Tytn. Too bad, I really liked the function to be able to really close programs with hardware ok button.

Not entirely related but similar, I was wondering whether it is possible to get the scroll wheel to scroll quickly through the contacts list using the 'big letter' lookup? I know of a couple of people who say the phone has randomly done this for them but they can't figure out how.

thewall said:
Thanks for helping out aadadams. Still having problems though. After a while the windows button won't open start menu and neither will ok button on the side of Tytn. Too bad, I really liked the function to be able to really close programs with hardware ok button.
Click to expand...
Click to collapse
I do not have a problem with the side button. When pressed while on the today screen it launches the start menu. How are your buttons mapped? Have you assigned multiple functions to these buttons that fail over time?

Chris The Ninja Pirate said:
Not entirely related but similar, I was wondering whether it is possible to get the scroll wheel to scroll quickly through the contacts list using the 'big letter' lookup? I know of a couple of people who say the phone has randomly done this for them but they can't figure out how.
Click to expand...
Click to collapse
I have not seen this but would welcome it.

aadadams said:
I do not have a problem with the side button. When pressed while on the today screen it launches the start menu. How are your buttons mapped? Have you assigned multiple functions to these buttons that fail over time?
Click to expand...
Click to collapse
Nope, only thing I've done is add button and pressed ok hardware button. Then I mapped it to close active program or whatever the term is.
It shows up as button 4075 I think.

Wierd, I did basically the same thing with that button but I remapped several others to extend their fuunctionality. I have never had that happed. My next question is what other apps are you running especially immature apps that may cause the conflict.

Hmm, not running that much else. Wisbar advance and pocketbreeze. That's about it.

I do not use Wisbar apps and sine it does make changes to native start and ok functions it could be the problem. Run without it for day or so and see what happens.

With only wisbar and no aeb+ everything has been ok, will uninstall wisbar and try only aeb instead.

Disable hardware buttons for incoming call

Anyone know how to disable the hardware buttons for the incoming call screen?
I only want to answer/reject calls with the slider, not the hardware buttons as I sometimes touch them by accident while getting the phone out of my pocket.
I've tried PocketShield but didn't like it, although it was able to disable the hardware buttons. Any other suggestions?

Have you already tried s2u2? The slider can receive/reject incoming calls and you also have options to disable the hardware buttons. Works great on my elf.

I tried it some days ago, couldn't get it to work the way I wanted it to, mainly because I don't want to use the locking part. I always lock my device with the power button and I only wanted to have the ability to disable the hardware buttons for incoming calls.
After your message, I decided to install it again and give it another try. Changed some of the settings and I think I finally managed to get it working the way I want to!
It's a bit of a memory consuming app for just disabling the hardware buttons for incoming calls, but hey, it works
Thanks!
If anyone finds a solution without using S2U2, please let me know!

Ok, I have uninstalled S2U2 again. Even though it did do the job, it was also a memory consuming application just for disabling the answer/reject keys during incoming calls and I want to keep my device as clean as possible.
I have searched for hours trying to find a solution to this what I think is a very common problem. How many of you have accidentally accepted or rejected calls because of the hardware buttons? In my opinion, HTC should have thought about this and provide a solution for it.
Anyone with a better solution than S2U2?
Thanks for your input!

New version 1.40 of S2U2 uses MUCH less battery. I almost don't notice, it's running. Great program at least for me.

Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.

can you tell me how you have set your settings for just disabling the hardware buttons for incoming calls in s2u2 ? Thanks

I've used AE Button Plus to disable the 'Answer Call' an 'End Call' hardware keys as I had the same annoying problem of accidentally rejecting a call when taking the device out of my pocket. This works well for me and have now enabled the keys to turn wifi and bluetooth off and on with 3 taps.

Thanks everyone!
I wasn't aware of the latest S2U2 version and I almost gave it another try until I read Anfloyd's post.
I did look at AE Button Plus before, but didn't think it was capable of doing what I wanted: disable the hardware buttons during incoming calls, but still have them functional when there isn't an incoming call (such as showing the phone dial screen which it does by default).
When I looked at the AE Button Plus website, I noticed I couldn't configure the buttons based on the current active screen/program. So, even though I knew I could disable the hardware buttons, I thought I would then loose the whole functionality of them..and that would make the answer and reject buttons on my device useless.
BUT, after reading your message Anfloyd, it got me thinking..I don't need to configure it based on the current screen/program. I can just disable the buttons for 1 tap..and assign programs for them for 3 taps for example.
So, now I have this:
- 1 tap: do nothing. This way, both the answer and reject buttons are not working during incoming calls and I can only use the slider to accept/reject calls.
- 3 taps for answer button: start the phone application.
- 3 taps for reject button: nothing yet, but I'll find something
This is a solution I can work with! I have only tested it for a short time, so if it turns out that AE Button Plus is causing problems I'll give the latest S2U2 another try, but so far this seems to be working just fine.
Thanks again for your input!
ChrisVDD, those options can be found in the S2U2 settings. I don't have S2U2 installed anymore so I don't remember the exact settings. I just disabled all locking features that I didn't need, selected to disable the hardware buttons and chose to use the slider. Give it a try, you should be able to sort it out. If you can't, let me know and I'll install S2U2 again to see what settings you need.

My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display

PhaseIV said:
My config in AEBplus
left hardware key
1 tab do nothing
2 press green key
right hardware key
1 tab do nothing
2 press red key
3 rotate display
Click to expand...
Click to collapse
Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.

Would you so kind please and tell me how to configure more than 1 actions to a button.
When I choose green phone button i can only say disable, but dont now how to get another function to work with same button.
I would like to have :
tap 1x = do nothing,
tap 3x = start phone application (normal behaviour.
Click to expand...
Click to collapse
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it

GryphonLeon said:
First, select and hold "Green Phone button".
Then do this from top to bottom:
3. Handle by AEBPlus
1. Single press
1. None
..and select Ok
Then select and hold "Green Phone button" again.
Do this from top to bottom:
3. Handle by AEBPlus
3. Triple press
13. Press Green Button
..and select Ok
Then File > Save and Exit
That's it
Click to expand...
Click to collapse
Thank you for your fast reply, now It works like I wanted it to do.

Is it possible to end call using red hardware button but not to ignore it before answering? I tried AEBplus and it works like it should but that's not all I needed.

danum said:
Since your previous post S2U2 1.4 has been released. This is supposed to address the issues you mention.
Click to expand...
Click to collapse
The problem I have with s2u2 is that I cannot mute incoming calls... The voulme buttons are locked... the touch screen is locked and mute on face down also does not work....
Maybe A_C will allow us which buttons to lock in the next release...

[req] 1 of 2 q solved. set mute\unmute keay

hi
i using artemis rom 3.5 (ill update to v6 in week or to )
solved:
i have double volume control one for ring and one for system..
i once saw a cab to make it single volume control to control both of them..
i cant find it..​
unsloved:
is it posiible to press on a button such as windows key (the middle one) to make the device silent.. and once more to restore the volume.. or somting like that?
just like the # on non touch phones​
thanx

Just go the sound settings of sense and enable single volume. its as easy as that

Just go the sound settings of sense and enable single volume. its as easy as that
Click to expand...
Click to collapse
thanx didnt know it yet
i have one more question described at first post

ilia987 said:
thanx didnt know it yet
i have one more question described at first post
Click to expand...
Click to collapse
Yep. With AE Buttons Plus you can assign Hardwarekeys (like Toggle Volume). Its free.

You can also just press the vol buttons and it has a vibrate/silent button on screen - fair enough it involves 2 presses not 1 but at least it works!

Turn off side buttons

Hi guys, I'm having troubles with one of the functions of the volume buttons on the side of the phone. When the phone is locked and someone rings me when I press either up or down I put the phone in silent - I want this thing off, it is pretty easy to accidently press it and miss a call - I did it a lot! Any help, please?

hakc said:
Hi guys, I'm having troubles with one of the functions of the volume buttons on the side of the phone. When the phone is locked and someone rings me when I press either up or down I put the phone in silent - I want this thing off, it is pretty easy to accidently press it and miss a call - I did it a lot! Any help, please?
Click to expand...
Click to collapse
Take this one "AE Button Plus" : http://ae.inc.ru/aebplus.php
Regards
cimber

Thanks, mate! Is this program confirmed to work on touch2? I've read somewhere that it can mess all of my buttons if it is not designed for my device or something like that.
EDIT: Okay it works, but is there any app or registry that can allow me to turn off only the function "Mute" when someone is ringing? This things shuts down the buttons completely and I don't have a volume control when I'm in the windows

hakc said:
Thanks, mate! Is this program confirmed to work on touch2? I've read somewhere that it can mess all of my buttons if it is not designed for my device or something like that.
EDIT: Okay it works, but is there any app or registry that can allow me to turn off only the function "Mute" when someone is ringing? This things shuts down the buttons completely and I don't have a volume control when I'm in the windows
Click to expand...
Click to collapse
It works on my Touch2 perfectly !
Just a hint, I have only disabled the "volume-up" button. If you press "volume-down" first, then "volume-up" works as usual !
Regards
cimber

hello,
I have a very similar problem (using Touch2, T-Mobile, German version), although in may case the Volume Up button seems to dismiss the call (the caller is rerouted to my mailbox).
What I want is: simply deactivate the Volume Up button when the device is locked.
I read much about AE Buttons Plus, however I also read much about this app using up battery, and I don't want that. I really ONLY need this single feature, so I don't want to use a bloated app which cooks coffee, washes my cloths and so on... you know what I mean.
Anyone knows how I could do that? Is there a reg key or a tiny app just for this?
Or can anyone at least tell me how I can use AE Buttons Plus without the battery draining?
cheers,
Saiba

Turning on the old vibration mode in Nougat OOS (4.x.x).

Was posted on reddit today, haven't seen it here I think.
Link to the reddit thread explaining everything: oneplus reddit thread.
TL;DR:
You can now have DND with vibration.
Slider in normal position. Hold volume down while pushing notification slider all the way up and down again very fast. It should be in vibration mode now.

Very nice trick, it was so boring to have to use the screen to change from with/without vibration.
I now fear that I will destroy the slider very quickly now
Let's hope it will soon be possible to achieve this just by pushing "vol down" as it was before :'(
(and vol down again to remove vibration, even in normal mode, just as it was before the 3 modes were created in Android)

i dont get it what is old vibration mode? i get vibration mode via slider? its silent

Vihru said:
i dont get it what is old vibration mode? i get vibration mode via slider? its silent
Click to expand...
Click to collapse
Sound + vibration -> Vibration -> no sound at all
That's how I would like to use the slider
For now it is :
sound + vibration -> some hell where there is sound for some and not for others -> no sound (and maybe vibration if configured so, but not switchable easily)

supermamie said:
Sound + vibration -> Vibration -> no sound at all
That's how I would like to use the slider
For now it is :
sound + vibration -> some hell where there is sound for some and not for others -> no sound (and maybe vibration if configured so, but not switchable easily)
Click to expand...
Click to collapse
Totally agree! Or just give us the option to REALLY control the slider?

Is it just me or this is not possible anymore in 4.0.3?

supermamie said:
Is it just me or this is not possible anymore in 4.0.3?
Click to expand...
Click to collapse
Lol not working for me either anymore xD

The tip works but it's quiet binding and painful.
Natively, it works. You put the physical button up (Silent) then you push the down volume button (and you keep the button pushed) and finally you place the physical button on normal mode. The "Vibrate mode" should ingage. If not, try again. It always work for me. A bit ****y isn't it?
Or...you install an application like "Sound Toggle" and it will do the trick via a widget.
Nope, it's not a bug, it'a a functionnality. ^^

Killawave said:
The tip works but it's quiet binding and painful.
Natively, it works. You put the physical button up (Silent) then you push the down volume button (and you keep the button pushed) and finally you place the physical button on normal mode. The "Vibrate mode" should ingage. If not, try again. It always work for me. A bit ****y isn't it?
Or...you install an application like "Sound Toggle" and it will do the trick via a widget.
Nope, it's not a bug, it'a a functionnality. ^^
Click to expand...
Click to collapse
I tried and tried and tried, without success
Any tips on an app which will add a quick toggle to switch on/off the vibration ?

supermamie said:
I tried and tried and tried, without success
Any tips on an app which will add a quick toggle to switch on/off the vibration ?
Click to expand...
Click to collapse
Try this: https://forum.xda-developers.com/oneplus-3t/themes/easy-to-vibration-mode-nougat-t3559124

I use Power Toggles. Add the Volume toggle to the widget and you can go ring, silent, vibrate modes.