Hello, I just bought my new HTC Touch Pro. I noticed that when I use my bluetooth handsfree it connects with no problems, but after the first telephone call (few seconds after terminating the call) the hands free bluetooth connection drops and the handsfree is left "in the air". I have to shutdown my handsfree bluetooth and restart it to automatically connect to the HTC TP. Next call comes, hang up, bluetooth connection dead again...
Previous phone (ETEN Glofiish X650 never had a problem with my Sony Ericsson BT hands free). Has anyone found any solution?
Dimi
I have same problem on Polaris after upgrading to Official WWE 6.1
What radio are you using?
Same Problem with Excalibur
Hi juys.
Sorry about wake this thread but i have the same problem with my HTC s620 "Excalibur" when connecting to Nokia car hands free speaker.
Wonder if there is any Solution for this issue
Windows Mobile 6.5 3VOL ROM
Radio 4.1.13.34
I'm sorry to report that this issue is also exhibited with the following headunit and phones:
Head unit: Kenwood DNX8220BT
Phones:
HTC Tytn2 with WM 6.1
HTC Tytn2 with WM 6.5
HTC Touch Diamond with WM 6.1
Sony Ericsson Experia X1 with WM 6.1
A simple dumbphone like the Nokia 6233 will work perfectly but all above WM smartphones are having trouble.
Also HTC S-740
It seems that this issue started since WM 6.1 Does anyone know what changed in the Bluetooth stack?
Microsoft Blames the headunits. Funny thing is that the Kenwood unit is listed on the Bluetooth SIG website which in turn is used by Microsoft as a reference.
On the MS website there are a lot of references to the jetware software but I have tested it without any positive results.
I've seen a post where someone reports that the installation of MS Voice command solved the issue. I will try that on the Tytn2 with WM 6.5
Within a few days I should be receiving the HD2 as well. I'm keeping fingers crossed..
Related
can someone tell me what bt stack we have on our mini?. I recently bought a BT foldable keyboard but somehow i can pair them but i cannot seems to get it to show what i am typing.
suggestions for widcomm?
:lol:
The mini runs the standard BT stack from Microsoft that comes as part of the Windows Mobile 2003 Second Edition Phone Edition (this has got to be the longest product name in recent times ...)
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
Can anyone point me to a method of pairing an Orbit (with Official O2 WM6 Upgrade) with a Mercedes Benz Bluetooth (SAP) car kit. Please? I have tried copying the BT SAP Test cab and run it successfully which appears to give rSAP (Sim Settings) but I cannot pair the device.
I can find the device, I can dial the long pairing code but I get no request to enter it on the Orbit. The car kit seems to then time out.
(I have had the same problem with a Graphite, a qtek9100... etc.)
Best answer might be to dump the car kit but I live in hope!
now this is the right place
Thanks!
Now that I have the correct thread - I don't suppose you have an answer
is there no place to set the SAP to authorised? in settings. I have installed A new rom
the Artimis touch rom and it has the SimSAP options in it
The problem is,
the old bt "mouse" of the MB cars was incompatible with the HTC telephones. We tried with several models and software revision but to no avail (Hermes, Wizard, Prophet and Artemis, WM5 and WM6).
The new "mouse" (now smaller and less looking like a telephone) works now w/o problems. This seems to be a MB bug and no HTC bug...
I hope I helped you
Segitz said:
The problem is,
the old bt "mouse" of the MB cars was incompatible with the HTC telephones. We tried with several models and software revision but to no avail (Hermes, Wizard, Prophet and Artemis, WM5 and WM6).
The new "mouse" (now smaller and less looking like a telephone) works now w/o problems. This seems to be a MB bug and no HTC bug...
I hope I helped you
Click to expand...
Click to collapse
Which MB BT model/mouse are you talking about? The SAP or HFP one?
Hi Developers.
I am trying to use my 614c connected to Nokia CK1-W carkit via bluetooth. The problem with this is that during any conversation the person on the other side hears horrible echo of everything he says.
Does anybody knows the solution for this problem ?
Thanks
Krame
try
start/settings/sys/audio/mic
uncheck the "enable AGC"
save by tapping ok to exit & sr
Checked this weeks ago.
This makes thing even worse.
I am thinking rather about some registry tweaking with mic sensitivity or swithing off when connected to car kit.
Marek
what is your rom VER ?
It is now WM 6.1 (CE OS 5.2.19965.1.2.3) that is ROM downloaded from our Russian friends. But I had the problem before updating too.
BTW: is there anywhere a more comprehensive bluetooth stack than this available in WM ? It is completely unconfigureable !
hi,
today I tried to connect my WM 6.1 X1 to my Audi A3 via bluetooth. However the X1 wasn't able to "find" the Audi MMI.
with my old HTC TYTN (WM 6.0) I had no problems.
Any ideas how I can fix this?
thanks.
I am assuming that it works in a similar fashion to my A6. Make sure that you activate discovery mode on the phone and start the 'add new device' from the bluetooth devices tab on the phone within 30 seconds of starting the car engine, as after this MMI is not visible.
If this doesn't work then try installing the JETware Hands-free Extension for Windows Mobile phones onto the phone internal memory to see if that works (you don't have to pay for the software for the first 30 days).
hi,
yes, you are right ... don't ask me why but one day later it worked finde.