Related
Hi,
Anyone knows any free VOIP softphone for O2 Exec which allows to configure to use third-party SIP providers (e.g. sipdiscount, sipgate etc.) ?
Thanks!
SV
use skype
Sorry, I meant to configure with SIP protocol.
sjphone, works fine
With SJPhone, at the moment, when calling, you have to use loud speakers or headset not the phone speaker. Is it right?
Thanks!
That happens with any phone edition device.. Apps don't have access to the other speakers...
Re Sip
I have tried many. However most free products are generic to a provider,
Successful products are:
Xten lite from xten Networks
SJ Phone this is the best and is easily configured to multiple profiles.
It intergrates nicely with our office Sip server too,
Regards
DW
Re Sip
I have tried many. However most free products are generic to a provider,
Successful products are:
Xten lite from xten Networks
SJ Phone this is the best and is easily configured to multiple profiles.
It intergrates nicely with our office Sip server too,
Regards
DW
svkhtn said:
Sorry, I meant to configure with SIP protocol.
Click to expand...
Click to collapse
May I know what is SIP protocol?
Is it different with Skype protocol? Is SIP protocol is a standard one?
Thx.
Regards,
Arto.
Artosoft said:
May I know what is SIP protocol?
Is it different with Skype protocol? Is SIP protocol is a standard one?
Click to expand...
Click to collapse
SIP is a standard - most VOIP application and hardware uses it.
I meen: SIP RFC 3261
Skype is a own protocol and only skype clients can connect each other using skype soft phone or by skype gateway.
I guess that the source is not public.
I use AGEphone.
http://www.ageet.com/us/
It is not Free.
But, maybe best.
Files are light, but works very well.
the sound is very clear.
We can use SIPdiscount, VoipBuster, VoipStunt, StanaPhone, SIPphone, Free World DialUp, Agilephone, etc all at the same time.
I installed SJPhone and could get connected. I could dial my cell phone number and it will ring my cell phone.
But there is no sound whatsoever in my Universal/JJ.
Can anybody help me? Did I miss something? I tried to plug in my headset but no luck as well.
Thanks.
Also, may I know which version of SJPhone you guys use?
Can you send the link for the download? I can only find the one for 2003SE and 2003, nothing for WM5.
Since I didn't see a follow-up post by anyone, I'd like to say that the SJPhone for Windows 2003 SE works with the universal *only in portrait mode*.
Has anyone [other than shamilsh] tried the ageet soft phone suggested in this thread?
Does Skype work over GPRS or just 3G?
Regards.
Just for text messages, skype is ok with GRPS - but for voice you need 3G oder WLAN.
Hi
Any sip cliente for wm5 that have G.729 (8 kbps) or G.723 (5.3 & 6.3 kbps codecs ?
sj phone only 711 or their own gsm....
Owl said:
Just for text messages, skype is ok with GRPS - but for voice you need 3G oder WLAN.
Click to expand...
Click to collapse
Is that need 3G as in would be slow, or need as in can't do it...
Just that GPRS is free for the T-Mobile plan I'm using, but think I have to pay for 3G (Relax + Web & Walk thing)
are there any programs that allow routing of the sound to phone speakers instead of main speakers?
Guys....just use sj phone with sip service from voipbuster.com and forget the rest.... and now you are talking....FREE and with free local rate call back number also...now...that ROCKS :twisted:
BR
My first post in this outstanding forum
I've spent quite some time looking for programs able to run my SIP VoIP desktop client on Tynt. On WinXP I use X-Lite with VoIPDiscount and I know for sure it's possible to configure X-Lite with many other SIP based services like VoIP Stunt.
Is there a tested client for Tynt? All I've found was for PPC2003 and I got errors all over. Ideal'd be a client working with both UMTS and WiFi, but WiFi would suffice completely.
On the other hand, Skype works flowlessly
I use SJPhone:
http://www.sjphone.org/preview/ce/
You need to adjust settings to make it work correctly, also audio is a lot better with the USB headset, see this thread for right settings:
http://forum.xda-developers.com/viewtopic.php?t=59131
You can also use x-lite CE 1.01, find it here:
http://forum.xda-developers.com/viewtopic.php?t=58154
SJPhone all the way here too. It also works as a Vonage Softphone!
thanks guys. I saw SJphone but somehow I didn't manage access to the beta page.
I'll let you know
If your provider supports IAX protocol (which is much better while on hostile firewalled networks) my choice is http://www.voipsurfer.net/
My sincere thanks, guys I'm gonna try them all. At this point I created correctly the profile with SJPhone; the same profile works great with the windows client (after creating the profile I copied it to my desktop and the XP client accepted the profile like it was its own). After applying the profile the PDA client asks for id & pw, but I cannot register. Explorer is online so I know the internet connection is fine. I think I need some working yet.
I have managed to instal the pocketpc version of xlite and it works ok from the point of view of me trying to ring my home phone, it connecting and disconnecting ok and it registering as a broadband phone call through my isp when I check my online records.
The sound quality on the device is unusable.
When I use the supplied mini usb headphones I can hear the person I am calling very clearly but they can not hear me properly.
Can someone talk me through anything I can do to improve the settings so that I have a chance of using my device for voip calls whilst at home. I am not in the realms of anything to techincal though.
Hello,
I've been using the TyTn for a few months now and I still haven't found a good quality SIP compatible Dialer...
Of course i've tried all the well known voip applications ( SJPhone, Skype and even Bewip etc. ) but none of them come close to a good replacement of the default TyTn dialer.
Actually I though bewip would do the trick as it integrates well with the contacts but quality sucks, I have to use the headset to have acceptable quality call...
I just wanted to know if any of you were using their TyTn as a VoIP device over WiFi and been satified with their software...
Thanks
Not SIP, bux IAX...I travel a lot and use VoIP in airport lounges etc. SIP usually does not get me through the local firewall. IAX protocol is much better and smarter in that regard, so I would recommend you to look at it if you like: http://www.voipsurfer.net/, around 25 euros and a simple interface.
use sjphone, is free and it use the stunt server!!!Free phone for all home number!!!
5n0rk said:
use sjphone, is free and it use the stunt server!!!Free phone for all home number!!!
Click to expand...
Click to collapse
Can u tell me ur Sjphone settings? I got an account with VoipBuster for SJPhone but when i try it 2 use it in my TYTN, I always get a registratio error message... Thank you!
Usually when the internet access is "locked" I redirect all the trafic through an openvpn server that runs on port 443...
The problems with voipsurfer and SJPhone is that they aren't replacement dialers. You don't have access to the Phonebook. If you want a good quality call, you absolutely need a headset ( you can't use them as a phone ).
I just wonder why there is no such software on the Windows Mobile plateform : The lateste nokia/sony-erricson etc. handset features well integrated VoIP solutions...
jinkazama007 said:
Usually when the internet access is "locked" I redirect all the trafic through an openvpn server that runs on port 443...
The problems with voipsurfer and SJPhone is that they aren't replacement dialers. You don't have access to the Phonebook. If you want a good quality call, you absolutely need a headset ( you can't use them as a phone ).
I just wonder why there is no such software on the Windows Mobile plateform : The lateste nokia/sony-erricson etc. handset features well integrated VoIP solutions...
Click to expand...
Click to collapse
Anyone know of voip software that works with a bluetooth headset and mic (R35), as my wired headset is broken (I don't like it anyway as the buds are too big for my ears), and SJPhone doesn't seem to work with it (I hear no sound, nobody hears me).
AGEPHONE
it was an never ending story for me untill i found agephone. http://www.ageet.com/us/agephone/index.htm
you can try it with - there is a shareware version with that you can do calls for one minute, so you are able to check out the bluetooth compability.
STUN Support is given here too!
apokryphus said:
it was an never ending story for me untill i found agephone. http://www.ageet.com/us/agephone/index.htm
you can try it with - there is a shareware version with that you can do calls for one minute, so you are able to check out the bluetooth compability.
STUN Support is given here too!
Click to expand...
Click to collapse
I would appreciate it if you could help me with configuration settings for free world dialup, or point me to comprehensive documentation. I have completely failed to make the correct settings using the support settings on the ageet site, also from the fwd help. The problem is that I don't understand which information to add in the configuration screens, as the labels to the forms are unfamiliar to me and do not seem to equate to the account and server information which fwd provide.
I would like to use STUN.
Any help you can provide would be appreciated.
No SJPhone client for WM5?
I couldn't find the WM5 SJPhone client on their site.
Only for PPC2003.
Anybody can tell me where it does reside?
Thanks,
Arnie
Checkout the WM5 version under this URL
http://www.sjphone.org/preview/SJphone-1.60-WindowsCE(preview)/
thanks.. however
Thanks
Found it.. however...
It doesn't work through my Draytek NAT.
Skype does work flawlessly.
Will try again when my new router arrives.
Might work better.
Thanks!
Arnie
One last call before abandonning.
I have very few of the problems most people associate with the tytn. No screen issues, no problems with skipping under a2dp, nada.
apart from one....
I cannot find a functional voip program using either the handset mic and speaker, or a bluetooth headset. I cannot use the wired headset.
Somebody recommended agephone but I am completely unable to configure the phone to owrk with free world dialup.
Can anybody recommend a suitable solution, or help me configure agephone?
I am using SJPhone gladly with success.
I just would like to have video support.
Any SIP client with video support ?
http://www.microsoft.com/downloads/...5E-5F3B-47D2-955B-B0C1DEAC94D8&displaylang=en
thank you.
Microsoft Office Communicator Mobile may be a good choice, but I think it only runs with an LCS server which I don't have.
Do you know if it works with generic SIP server/proxy ?
mrmrmrmr said:
I am using SJPhone gladly with success.
I just would like to have video support.
Any SIP client with video support ?
Click to expand...
Click to collapse
#
Without the wired headset? It doesn't work even close to acceptably with the speaker and mic, for me, and I can't get it to work at all with a bluetooth headset.
hi trentend,
SJphone works with my mono bluetooth headset if I use the patch supplied by cybertron at following thread:
http://forum.xda-developers.com/showthread.php?t=278778
try it...
now, I only need video support. real video SIP support.
I tried Wengophone before worked good with my S200 now that i've got an vario II i'm gonna try and look if it's still as good.
Go to wengophone.com and look under download tab.
think this is one of the better ones.
works great
http://forum.xda-developers.com/showthread.php?t=596682 . d
Hello everyone!
Situation: I have several VoIP provider (sipgate, 1und1...) My problem is I can only setup a single provider in my phone with built-in WM6 VoIP client.
Solution attempt: I set up an account with pbxes.org. There I added my SIP providers and an extension with username and password. Now I tried to set this up using the Sip Config Tool V2.0.1. Here are the settings:
Sip Server: pbxes.org Port: 5060
(tried others like sip.pbxes.org(com) and the IP)
username: username-extension_number
password: password
That's it. It's not working. The Today Internet-Calling-plugin tells me "searching....", but never to "selected"
I also tried using x-lite on my desktop pc. With the same settings I successfully registered and I was able to use pbxes just as it is supposed to be.
When using sipgate directly with WM6 it works, but not with pbxes.
I am kind of running out of ideas. So any help is really appreciated.
Thanks in advance,
Stefan
Tried several times as well on my S620.
Now, two days ago got a S710 and was curious to test VOIP on it.
Very first time I tried I was thinking everything was fine, at least nearly.
The Today plugin showed "Searching" (like with providers it works with)
The icon for Internet Phone showed up.
Unfortunately it "semi worked" only that time, any other tests I tried the Today Plugin didn't even get into "Searching".
The bad thing is that it did work once, like meaning it could work. Now PBXES status shows as Registered but it isn't actually. The other bad thing is that I tried to post in their forum for help but didn't receive much info back.
Bad luck, but I'll try and try again. Maybe newer files one of these days and our probs would be solved.
Ka.
Subscribe message
I ever check the message from sip server, I found that windows mobile voip client not only send register message, but also try to send subscribe message, I guess that it is reason that some sip server only may work as registra, and not handle correctly subscribe. it seems the reason the client always display "searching", I will try to modify sip server to support subscribe message in the future.
try fring
try using fring...
it supports multiple sip accounts.. and actually register u not just subscribe you.
You are right, Fring or any other 3rd party app connecting to a SIP server can work maybe better than the "builtin" SIP functionality but personally would prefer being able to use a solution where I dial like usual and calls get automatically router to VOIP, not having to switch to a separate app.
This is why I'd rather like the builtin sip stack to work on its own with any SIP provider. I tested it with PBXES but doesn't work. I'm currently renting a VPS with Asterisk (Trixbox) installed and it does connect. Only prob is that even if it manages to register, seems MS VOIP implementation is still not really compatible or suitable for the use I wish to have.
Ka.
This is an old thread but this is the same problem I have on my HTC HD2 (Leo).
Installed sip drivers and voip config cabs and configured it with my account through pbxes and it is not working.
Can someone help?
Android (Moto droid, HTC Hero) I had no problem with pbxes and sipdroid...
Hi Guys,
Looking for some VOIP/SIP clients for HD2, anything other than PortSIP, Fring or AGEMobile would be preferable!
Going overseas tomorrow and my PortSIP stopped working and wont start working again so trying to find a program that's just as good AND easy to setup as PortSIP (Agemobile confused the hell out of me)
thanks,
Zhuk86
+1 I am in a similar boat. Looking for a stable VoIP solution to work on my HD2.
Ideally, I would love tight integration with the standard WinMo dialer.
+1. Same here!
sip client for hd2
need also a stable sip sofrware for hd2 +1
thnks for help
I tried PortSIP recently on my phoneset, and it works fine. However, as in my grief with all these SIP clients products, I fancy very tight SIP integration with existing Phone Dialer, with the option of editing Dial Plans to define outgoing call rules (was it IPDialPlan.xml ?). I heard this is how it used to be with WM5, but somehow operators have scrapped it out of ROMs in WM6.5.
Ideally, I should just dial my telephone numbers from phone, and based on the dial plan, the phone should direct calls either on SIP or Mobile Network. Am I asking for too much here?
[Loud Thinking]
I am going to bring my trusty old O2 XDA Exec out and put WM5 back on it, and then see if the SIP client can be (easily) configured on it.
bym007 said:
I tried PortSIP recently on my phoneset, and it works fine. However, as in my grief with all these SIP clients products, I fancy very tight SIP integration with existing Phone Dialer, with the option of editing Dial Plans to define outgoing call rules (was it IPDialPlan.xml ?). I heard this is how it used to be with WM5, but somehow operators have scrapped it out of ROMs in WM6.5.
Ideally, I should just dial my telephone numbers from phone, and based on the dial plan, the phone should direct calls either on SIP or Mobile Network. Am I asking for too much here?
Click to expand...
Click to collapse
+1 for me too!
Check my signature for an alternative voip client