So I bought the X1 last week and I have to say that I’m very impressed about it. I first didn’t know which one to choose: the X1 or Touch HD but after I had seen the HD…. It is just too big and therefore not practical anymore.
So after playing around with the X1 I have a couple of question and maybe you guys can help me. Until now I am not able to change my default weather location to a city which is not in the default list. When using the SPB panel I can choose my city but because most of the time I use the standard X1 panel I like to change it here also. Does somebody know if there is a fix/patch available for changing the default weather location to a city that is not in the list?
I also changed the default button actions where I changed the right button to contacts. However after using the TF3D panel for a while it is resetting the button settings to default when switching to the X1 panel again. Does somebody know is this is a bug in de TF3D panel?
I like to know if it is possible to permanent suppress the ‘making connection to gprs, 3G’ message when connection to internet. I don’t like the message because once an hour I connect to check my mail, update weather etc. and also use the ‘automatic disconnect after idle’ to save battery power.
Is there a way to change the default language of windows mobile without flashing the ROM? I heard there is a registry tweak for this but can’t find anymore info about this.
The last question I have is about the usb-pc connection setting. When I connect my girlfriends mobile (Touch Diamond) it every time asks if you want to use activesync or use it as a diskdrive.
I like to enable this option on my X1 also because now I every time have to go to settings to change the way the phone has to connect (active sync or diskdrive). I though this was a default feature of windows mobile but don’t have the checkbox to enable or disable this question. Does somebody know why?
I hope some of you can help me out with these questions.
uitje said:
Until now I am not able to change my default weather location to a city which is not in the default list. When using the SPB panel I can choose my city but because most of the time I use the standard X1 panel I like to change it here also. Does somebody know if there is a fix/patch available for changing the default weather location to a city that is not in the list?
Click to expand...
Click to collapse
The weather locations in the X1 panel is a hardcoded list in the SonyEricssonPanel.dll and CITY.dll files. They collect the weather data from AccuWeather.com so maybe by patching these files with a location that AccuWeather supports it is possible?
on8a said:
The weather locations in the X1 panel is a hardcoded list in the SonyEricssonPanel.dll and CITY.dll files. They collect the weather data from AccuWeather.com so maybe by patching these files with a location that AccuWeather supports it is possible?
Click to expand...
Click to collapse
Ok, this doesn't sound like something I can do myself.
Do you mind to tell me how to set the auto-disconnect after idle? My X1 keeps the data connection open permanently after periodic mail checks etc... How to do it?
Ciddy said:
Do you mind to tell me how to set the auto-disconnect after idle? My X1 keeps the data connection open permanently after periodic mail checks etc... How to do it?
Click to expand...
Click to collapse
I found it at: http://www.megaupload.com/?d=V8D6ARI2
Works perfect for me.
uitje said:
The last question I have is about the usb-pc connection setting. When I connect my girlfriends mobile (Touch Diamond) it every time asks if you want to use activesync or use it as a diskdrive.
I like to enable this option on my X1 also because now I every time have to go to settings to change the way the phone has to connect (active sync or diskdrive). I though this was a default feature of windows mobile but don’t have the checkbox to enable or disable this question. Does somebody know why?
I hope some of you can help me out with these questions.
Click to expand...
Click to collapse
This is not a WM feature, it's a Diamond/TouchPro feature. But I also miss this too (having both a TP and X1) There have been a lot of Diamond features ported to the X1 so I too would appreciate anyone having found a way to include this.
apprentice said:
This is not a WM feature, it's a Diamond/TouchPro feature. But I also miss this too (having both a TP and X1) There have been a lot of Diamond features ported to the X1 so I too would appreciate anyone having found a way to include this.
Click to expand...
Click to collapse
You are right, this morning I discovered that is is a Diamond/TouchPro feature. I tried to install the htc usbtopc popup application found at:
http://forum.xda-developers.com/showthread.php?t=427956
After installing you will see the option that we are looking for. However when connecting the usb cable nothing happens. It still connects as you have specified under usb to pc settings. and is not coming with the question: activesync or diskdrive
uitje said:
You are right, this morning I discovered that is is a Diamond/TouchPro feature. I tried to install the htc usbtopc popup application found at:
http://forum.xda-developers.com/showthread.php?t=427956
After installing you will see the option that we are looking for. However when connecting the usb cable nothing happens. It still connects as you have specified under usb to pc settings. and is not coming with the question: activesync or diskdrive
Click to expand...
Click to collapse
I think this is because that cab file is just a pop-up which does not link to the actual required program/libraries. I read through the post you mentioned but could not see (for the time being) how it would work on the X1.
Thanks a lot. Unfortunately GPRS seems to suck at my cheapo provider today, so I couldn't quite verify it yet...
Related
Hi,
This may be a generic piece of software but I'll post it here becuase the TyTn is the device I want to use it on...
Is there a piece of software available that will switch on and off bluetooth at a specified time?
If not, would somebody with some programming knowledge be able to write this?
The idea behind it is that - say you travel to and from work at a specific time - say 8am -> 8:30am and 5:30 -> 6pm - you would'nt have to keep switching bluetooth on and off in order to connect your mobile to a headset...
Cheers
Lee
Auto switching..
Have you tried PocketZenPhone?
it may be what you are looking for..
Charlie Grillo
Phonealarm has an option to schedule profile changes at specific times and within each profile, one of the settings available is to switch bluetooth on/off. You can also specify to run a program of your choice upon profile change as well.
TyTn is PocketPC bassed not SmartPhone bassed so it dosn't have profiles as such...so don't think that'll do it...
Phonealarm is a program which gives your profile functionality on a PPC device.
My phone is a Vario II (aka HTC Tytn).
Nicky said:
Phonealarm is a program which gives your profile functionality on a PPC device.
My phone is a Vario II (aka HTC Tytn).
Click to expand...
Click to collapse
I'd better have a look at it then!!!
Yeh, it is worth a look, it is a great program
I really missed having profiles when I switched from standard phones to PPC devices which is why I bought it.
If you click on the link on my first post it will take you to the developers home page.
I'm using SKScheMa from the SKTools folk.
http://www.s-k-tools.com/
It works fine to schedule all sorts of stuff on/off, including soft reseting in the middle of the night, running clean up utilities at 6am etc..
It's also got some neat (if quite complicated) scripting capability but there are one or two pre-canned scripts that you can assign to buttons like 'Toggle BT' ...
Works for me...
Cheers
Dave
davejeff said:
I'm using SKScheMa from the SKTools folk.
http://www.s-k-tools.com/
It works fine to schedule all sorts of stuff on/off, including soft reseting in the middle of the night, running clean up utilities at 6am etc..
It's also got some neat (if quite complicated) scripting capability but there are one or two pre-canned scripts that you can assign to buttons like 'Toggle BT' ...
Works for me...
Cheers
Dave
Click to expand...
Click to collapse
Dave
is it possible to use this to get ActiveSync via bluetooth to start automatically when I come in range of the bluetooth on the PC? I do all my synching with BT, but it is a pain in the butt to have to manually start the process every time
yeah - I know what you mean... so as far as I know, it's possible to create a script to switch BT on, then start an App (such as Activesync)... you can even script it to emulate stylus 'clicks' etc.. now the only trick may be having to start the script (for activesync) depending on a connection being available ... but there is some capability called WATCH which is supposed to watch for certain events etc...
So, have I done it myself ? no...
Is it possible ? it certainly looks like it..
Cheers
Dave
Hi lsainsbury,
I would also give PocketZenPhone (mentioned above) a try. From experience I have personally found it better than Phonealarm for switching profiles etc...
From what I remember PhoneAlarm has other features which I was not interested in. PZP has many features for customizing notifications etc...
I am sure others will disagree but this is my opinion.
Guess you have nothing to loose by trying it, right?
Tried both, pocketzenphone is the best IMO....its only missing ONE thing which is automatic profile changing via cell id.
(as you can see by my new topic) Phonealarm seems to have problems with the TyTN from my experience anyway!
Hi
(1)
I dont like annoying sound of opening/closing Start menu or choosing a menui item. To avoid it, I have to uncheck "Events (warning, system events)" item in Sounds&Notifications screen. However then I miss sound of warnings and system events I guess. How to disable sound for Start menu only?
(2)
When I ActiveSync with Exchange, ActiveSync keeps synchronizing endlessly. Its status is "Looking for changes", then "Synchronizing" and the same again and again without any limit. I just synchronize emails from Outlook folders. No matter if "DirectPush" or "Synchronize during"="When new items arrive" is turned on/off.
(3)
On the forums, BatteryStatusExt1.04.cab is being distributed. It doesn't work. I wonder what the file actually is. Original BatteryStatus tool has another filename and version as well.
(4)
smsOrganizer needs to activate using code from authors web. If you make a mistake (thats what I PROBABLY did), it will never run, even after reinstalling. Not nice. I can just wonder in what file or regkey the author stores the key:/
(5)
htCustom tool (tested version 1.4 and 1.5) completely not functional, throwing exceptions everywhere.
(6)
Any plugins to see Herald files in FAR manager (preferable) or Total Commander?
(7)
Any idea how to import VCF containing more items (not just one)? Seems Windows and Nokias have this problem. I already splitted one big VCF to 300 small VCFs and wonder how I'm going to import them. Clicking on them will take years..
(8)
My VCFs which Im going to import contain more mobile phones. Windows generally doesnt support it. In the address book, there is no option to add new field like on Symbians. How do you solve this situation? What do you do if you want to store more mobile phones? Of course lot of people have more mobile phones!
(x)
Why you use Rapidshare to store files? Please don't support those ****!
Great phone anyways. I dont care about money and this is the best phone I could find. Nasty size, high stability (wow, no single crash), fast synchronization, freaky keyboard (with sym.txt to be easily altered). Very happy with it
any hints??
Well i got you a hint for the last point (rapidshare):
Use http://www.xirror.com
Uploads all your files to 4 Sharedhoster automatically.
xsign said:
Well i got you a hint for the last point (rapidshare):
Use http://www.xirror.com
Uploads all your files to 4 Sharedhoster automatically.
Click to expand...
Click to collapse
Or: www.putstuff.com
and some xda-dev user made an own host for the xda community. I don´t remember the mirror at the moment. But i will search.
no thanks, I actually DONT want to support ANY of filehosting services. I strictly say NO to making business from sharing files. Use torrents or whatever instead.
any help for other points (except 3 which I found out why)?
more points
what i found negative also is
- alarm can use only WAV files (no chance to wake up)
- M$ formats forced (WMAs everywhere, no details about MP3 songs in Info)
- regurarly, when i type with hw keyboard, arrows stop to work
- sometimes storage card disappears (+ had "StorageCard2" problem)
- low quality loudspeaker, people just cant hear me
- use a program
- use coreplayer
- not true
- not true
- not true
xsign said:
- use a program
- use coreplayer
- not true
- not true
- not true
Click to expand...
Click to collapse
- ok im using a huge slow tool now, just to set the system scheduler...
- no problem
- true, even with remote control from Windows desktop, arrows stop working after some typing
- true, every morning, my scheduled events dont happen because the storage card is missing. but actually i see it's working, even if the drive is not corrupted (also happens sometimes)
- true, very bad speaker and microphone. loudspeaker is screaming and you actually dont hear voice. also people hear twice. also people dont hear you well generally. also, even with quietspeaker, people can hear you properly.
To your first problem I think all you have to do is uncheck screen taps. I had the same problem with activesync also. The problem turned out to be my firewall. Had to turn it off in order for the device to sync even if i set a permission first.
And if your still using WM5 I found this in the wiki:
Improve Sound Quality of Speaker Phone
You might have observed that when you turn on speaker while during a call, the other person has complained of too much disturbance on the line and can hear more of static then your voice. Here's a fix to improve mic sensitivity:
HKLM\Software\HTC\AUDIOGAIN(x)\RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM\Software\HTC\AUDIOGAIN(x)\EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where (x) = none, 0, 1, 2
You can find most of the reg edits from HTCustom and just do em yourself.
M
Heres the actual e-mail pertaining to the activesync problem. This can also be found on the Microsoft Website.
Good afternoon
We are aware of the HTC P4350 memory card corruption problem Farooq. We believe that Windows Mobile 6 will fix this issue that you are experiencing. We are expecting this update to be available for download through the HTC eClub on our website at the end of July.
With regards to your ActiveSync problem, there are many things which could be causing active sync to not synchronise
with your computer. One possible cause could be your anti-virus software and
your firewall.
To solve firewall issues, please open up your firewall program and navigate to
the exceptions section. Here you can set the firewall to allow certain programs
and ports. You will need to make sure your firewall is set to "allow
exceptions", then in the allowed programs list you will need to have four
programs related to active sync allowed. the filenames are as follows, however
they may be called different names in this list.
wcesmgr.exe
wcescomm.exe
rapimgr.exe
astu.exe
Also you will need to allow the following ports:
Inbound TCP
990
999
5678
5721
26675
Outbound UDP
5679
Once these ports and programs have been added to the exception list, you should
find that Active Sync will now work with your computer. If you are still
experiencing problems, then try disabling your anti-virus software as this can
sometimes conflict with Active Sync. If you still cannot synchronise then
please phone our call centre and one of our agents can troubleshoot your setup
with you in order to solve this issue.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Matthew
HTC Europe
[email protected]
http://www.htc.com
Hope that helps.
neptune, thank you very much for your reply. i have fixed most of my issues (they start with √).
(1) of course i have "screen tap" off, but Start menu still beeps loudly!
(2) √ FIXED somehow the problem disappeared - maybe by altering AllowLSP reg value, which was required to route internet from home PC to PPC.
(3) √ FIXED
(4) √ OBSOLETE - i dont care, will not search for some registry key to use the tool
(5) √ OBSOLETE still crashing - will not use the tool. I use ASergOptimize pack instead.
(6) would like to know. I heard TC plugin exists.
(7) √ OBSOLETE: i did it manually. it was really complicated job with lot of hacks, using regexp search/replace and manual import of all contacts one by one. I wish I never change platform again...
(8) √ OBSOLETE: again lot of hacking, I mapped Symbian fields to funny Outlook fields (e.g. "Mobile 2" -> "Car", "Mobile 3" -> "Radio")
(a) √ OBSOLETE I will use some tool. (I hate using separate tool for alarm. Why Windows doesnt have normal one.. I tried Gentimer tool, very slow one, crashing my phone on each event!)
(b) √ OBSOLETE - will use some tool
(c) BIG PROBLEM 1 arrows!!!
(d) BIG PROBLEM 2 morning schedules!!!
(e) wow thanks for this, will try it
overall, transfer from Symbian to Windows is not easy... a lot of work I had to do... however I feel much happier with it.
one note: interestingly, i find WM programs to be very small and take very small memory!
I sometimes had the same problem with the arrow keys on the keyboard.
Maybe you can fix the problem temporary if you switch to the Todayscreen and back again to your application where you type. For me this fixed it most of the time.
Dont know if i only was lucky because i did not got the problem often.
beowulf6 said:
I sometimes had the same problem with the arrow keys on the keyboard.
Maybe you can fix the problem temporary if you switch to the Todayscreen and back again to your application where you type. For me this fixed it most of the time.
Dont know if i only was lucky because i did not got the problem often.
Click to expand...
Click to collapse
I get this problem very often, basically when I type any SMS and that's not acceptable.. It can happen several times when writing one SMS. That's toooo much. I want it to be fixed somehow..
never encountered a keyboard problem such as this in the past. If you havent tried changing the keyboard then i'm not sure what it is.
never had any of the issues written about here with my p4350
either with wm5 or wm6
maybe I have missed something, but have you guys tried the wm5 ruu update for p4350? (http://www.brightpoint.com/Brightpo...HTC_NOR_5.4.409.2_4.1.13.34_02.79.90_Ship.exe)
thats a norwegian ruu, but im sure you can get it from your provider..or wait for the wm6
sorry if im stating the obious here
Hi, I'm a developer wanting to write an app/today plugin. Do you have any request?
Yea I've wanted this for long time and hope you make it for me. Program that like the watch beep or vibrate 30 min or hour and not turn the screen on?? so I can tell time without pulling the phone out.
Thanks for the opportunity, I was thinking about asked here.
Today plug in for Last call and Running Program as in O2 Plus. Both are nice features of O2 Plus but sadly hacked version has lot of issues to run on wizard and it's big prog to install only for those plugins. Thanks.
check this out http://forum.xda-developers.com/showthread.php?t=328317
I'd love an app that would allow you to get notifications of email that goes into folders other than inbox. Currently, there's no way to do that, and there are no rules you can set like in desktop Outlook to inform you when a message goes into one of those folders.
Hi Kartam, I use claunch, you can see it in my avatar there, I would love to be able to finger scroll the launch icons to the left or the right to quickly get to all my apps, configurable icon size of course. Outside of the today screen a finger friendly file browser is definitely waiting for development, something that has the look and feel of pocketCM but shows your files instead of your contacts, complete with favourites and filters for stuff like music videos or documents. It should also allow users to set a default action on selecting any given item.
funger friendly alarm clock?
Hi,
how about an alarm clock with numbers like a telephone pad, so you can easily type in the wake up time (regular cell phones allow this). I tried all sorts of commercial products, they are not good (snowtime, spb time, etc...)
Or how about a modern version od "pPod"? :-D
Good luck with all your programs!!
finger friendly alarm clock?
Hi,
how about an alarm clock with numbers like a telephone pad, so you can easily type in the wake up time (regular cell phones allow this). I tried all sorts of commercial products, they are not good (snowtime, spb time, etc...)
Or how about a modern version od "pPod"? :-D
Good luck with all your programs!!
Mine's rather Simple!!!!
...or at least I think it it should be.
All I want is an app (preferably that sits on the today screen) that can toggle the network selection between automatic, roam only, and home only.
Sometimes I need to roam to hold a proper signal, and in those places I like switching my phone to "roam only". Then, when going home, I switch it back to automatic network selection. Problem is that this is buried in many menus and takes several clicks to switch. Its a pain to do this 2x a day.
what do you think?
I actually think you may be able to do that with MortScript, I could've sworn I saw a script that did something similar on HoFo or another forum with one that did almost exactly what you described, but it might've been the WiFi radio in conjunction with a GPS puck...or something
I have multiple application using GPRS. My problem is that all those application are not using tha same APN (not sure of the name, I mean different GPRS connections). Each time I need to use one application or another I need to go to the parameters, change my setting click multiple times on OK.
It would be great (at least for me) to have an application on the today screen which permit to select the correct APN.
Regards
Stephane
cybersush said:
Hi,
Or how about a modern version od "pPod"? :-D
Click to expand...
Click to collapse
What a great age we live in when a completely touch screen digital music player is not considered as modern!
Haha, you got a point there, touché :-D
What i meant was a more modern pPod skin (maybe more skins to choose from...?), a playlist manager of some sort (so you dont have to browse through all kins of folders until you find your mp3s), slightly bigger buttons, ....
I love the design and the simplicity of the pPod though, just a little tweaking would be cool. And yes, i did also try mortplayer and HTC audiomanager, both great programs, but both programs are too big for just playing music (in my opinion)
Actually a great program would just be a hack to have HTC Audio Manager use the ID3 Number tags to sort music instead of Alphabetical
Re the new ppod program - that'd be great - I've been refreshing the iphone media player thread like nothing on earth - cant wait to see what that turns out like... the HTC hack would be good tho.
ps you might want to check out Simple Tunes V1.61
Hi!
You can make a little program for me??
Here you can find a little CAB http://forum.xda-developers.com/attachment.php?attachmentid=49265&d=1188921933
They copy to the Windows folder a little executable, copy into StartUp folder a shortcut to it, and add few registry-entries....
Well, this program don't have any interface, simple start when device start...
The target is "improove" the quality of A2DP transmission (audio over bluetooth)
BUT, when this service running, the battery quickll drain!!
You can make a simple app (like a GUI) to enable/disable it??
To enable = write few registry-entries and copy a shortcut to the StartUp folder, then softreset the device
To disable = remove the same registry-entries and remove the shortcut from the StartUp folder, then softreset the device
Can you create an application that will let my Hermes roam the floor vacuuming!?
a2dp stereo auto enable
can you write (or is there out there) an app which enables the a2dp pairing with a bt headset so the stereo is enabled by default when the headset re-establishes a connection.
currently (for me) if i turn loose the pairing, ie if I charge the headset, then turn the headset back on for a2dp. I have to run the bt settings in control panel and click 'set as wireless stereo' on the headset.
note the phone headset is enabled straight away when it is powered up.
thanks
left/right scrolling today screen plugin
this would be a sweet today plugin....
Location based profile changer
I downloaded a new app called HTC home plugin for WM6. It has a option to have weather show up. Has anyone used this and know how the weather works or can someone try and figure this out for me. heres the link to the app. Thanks for the help
http://freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html
Hi.. you should search in this forum.. there are a lot of threads with this plugin..
Well there are many scientist all around the world trying to figure out how the weather works.
They fire rockets high in to the atmosphere and launch balloons with sensors to collect data.
Then they use supercomputers to model the weather based on the data collected and try to predict / analyze the behavior of the planet.
Seriously though:
1st you need an internet connection on your phone / PDA. Then you select the tab with the picture of the sun on it, and click in the top line of the plugin. A list of cities world wide will open and you can select your location. The plugin then will download the forecast for that location.
By clicking on the plugin now you can switch it showing today info and info for the entire week.
super thanks....but why doesnt it work with the normal edge data connection? how come only with the Wifi. is there a simple way to fix that. thanks
Strange. For me it does work with EDGE. Maybe your EDGE connection is not configured under 'Internet' or you need to go to settings->connections->connections->advanced->network selection and change both drop-down lists to 'My ISP'.
It won't work over a proxy connection. There's a patched version that works over Tmobile's EDGE, but even that won't work on a proxy connection.
That software is EVERYWHERE on this forum. Look around a bit and you'll find out more info about it.
Hi all,
Having recently lost my TD, I have purchased a new Topaz. Are any of the tracking programs useable on the TD2. Has anyone got any experience with any of them???
Thanks
Pete
Remote Tracker
I use Remote tracker:
http://remotetracker.sourceforge.net/
It's a great (and free) program that allows you to send coded text messages to your missing phone, which will activate the gps and text you back with it's co-ordinates. You can do other stuff to, like wipe the address book, or just set off an alarm if you loose it in the house!
tonyh0905 said:
I use Remote tracker:
http://remotetracker.sourceforge.net/
It's a great (and free) program that allows you to send coded text messages to your missing phone, which will activate the gps and text you back with it's co-ordinates. You can do other stuff to, like wipe the address book, or just set off an alarm if you loose it in the house!
Click to expand...
Click to collapse
Tony, do you have it working on a Topaz?
I have it working on a Touch Diamond 2, aka a topaz, afaik.
Superman_1122 said:
I have it working on a Touch Diamond 2, aka a topaz, afaik.
Click to expand...
Click to collapse
Did you have to do anything special to get it working? Other than just run the CAB and start sending it messages beginning with rt#? Maybe there's something silly that I'm missing. I'll go read the directions again just in case...
there is a simillar function of Microsoft's Myphone i think
valkounnis said:
there is a simillar function of Microsoft's Myphone i think
Click to expand...
Click to collapse
Not quite similar. It only shows locations where the last known sync was executed, or where the last pics were shared....
Remote Tracker gives you a sms with lat/long position of the phone (I also got a Topaz; it works).
reperion has this function (use in stealth mode). Shows last reported position on Google Maps. Works very well... reporting distance is configurable, obviously accuracy depends on last GPS fix, but could locate it to nearest building.
I use it on my Diamond 2 and other WM phones and it works perfectly.
www.reperion.com
Maybe found the problem?
I found some additional information in another forum here which may be relevant. This program apparently uses a Windows Mobile function called the message interceptor. This function appears to not work if the following registry keys are present:
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc\SMS\Rules:{1000BC1C-F4A3-4210-B197-4AEBF2CEE6F5}
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc\SMS\Rules:{3AB4C10E-673C-494c-98A2-CC2E91A48115}
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc\SMS\Rules:{77990A0E-60B8-4103-B9AF-17157E4274FD}
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Svc\SMS\Rules:{A0C65276-77C8-48ef-B2AF-049DCB4171CD}
I have three of these keys present on my device.
Could someone with a Topaz and a working installation of Remote Tracker check and see if you have these registry keys?
Also, if anybody knows anything about these keys, particularly whether or not it's safe to delete them, please post.
Thanks!
like the sound of this app, very useful