i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
What the button?
I have four on my Sonorix :roll:
Only three on Logitech and two of them are volume controls so it's easy
This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.
It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.
My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..
nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..
This issue is very likely one of the reasons why A2DP was never officially released.
i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...
Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...
no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).
Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew
I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620
I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?
Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...
a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth
doesnt work
check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle
Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers
I am having trouble getting my HTC Mogul to connect with car stereo by bluetooth for hands free talking. The stereo I have (http://www.pioneerelectronics.com/pna/v3/pg/product/details/0,,2076_310069882_291159553,00.html ) allows bluetooth enabled phones to connect to it and use handsfree over the car speakers. I had it successfully working with every other phone i've owned however i can't seem to get my mogul to pair with it. Any suggestions? I've tried enabling the bluetooth on stereo to "discoverable" and had my phone attempt to connect but it won't work. I've also made my phone "discoverable" and tried to have the stereo initiate the connection and still no luck.
Any help would be greatly appreciated.
Thanks
I have a HTC P3600 (Trinity) PDA telephone with WM5 installed on it. I use it with the Philips SHB7102 Bluetooth Stereo Headset. When I pair the Philips SHB7102 Bluetooth Stereo Headset with my PDA it connects. When I walk away from the PDA for more than 10 metres and than walk back, I have to redo the whole pairing again from the beginning. The strange thing is that when I walk back the telephone function is normally working through my Philips SHB7102 Bluetooth Stereo Headset (it recoqnize my bluetooth headset) but the Wireless Stereo function (musicplayer software on my PDA) doesn't Recognize my bluetooth headset. So for this I have to do the whole repairing process again. If I turn off the bluetooth headset and then turn it on again I also have to do the whole repairing process again. The manual says that the pairing process is a one time process. This is only true for the telephone function but not for the music listening function.
I also tried the HTC P3600 with the Plantronics Pulsar 260 Bluetooth Stereo Headset and then this problem didn't occur. With the Plantronics the pairing is a one time action, but the sound quality is far less good as the Philips.
Does anyone has the same problem or knows how to fix this.
Hi,
I have recently been trying to connect my bluetooth headset to my HTC Touch Dual with no success. The phone will not recognise that the device exists when I search for it. I have tried two headsets one from Jabra and the other from Sony Ericsson, my Dual will recognise neither (even though my Sony K810i recognises both). Strangely my original Touch wouldn't recognise either of these devices either.
Can anyone suggest what is wrong? Thanks.
Have you set the bluetooth headsets to pairing mode? Usually by pressing the power button 5-10s and the light changes to flashing lights. After youve done that your nike should detect it.
I have a plantronics 640 and a jabra BT stereo 620, both pair without problems.
Hi all,
I need some help..
flashed WP7 on my HD2, but I can't pair my motorola H15 bluetooth headset.. I turn on bluetooth, flip open my H15 and tap to pair but I get the message 'could not connect'..
The weird is that the same phone connects fine via bluetooth with my tomtom live 1000 navigator..
any ideas? thank you..
For me it is pairing perfectly with my Stereo Bluetooth headset but cannot pair with my kennwood Bluetooth handsfree Car Radio.
Sent from my HTC HD2 WP7 using Board Express Pro for Tapatalk