Hello, I have the problem that if I use my Trinity as a USB modem via Internet Sharing, then it functions, actually, quite wonderfully. But if I download bigger things, or look Flash videos, it breaks off the 3G connection after a short time automatically. Does somebody have a council?
Deutsch:
Hallo, ich habe das Problem, dass wenn ich mein Trinity als USB Modem nutze via Internet Sharing, dann funktioniert das eigentlich ganz wunderbar. Aber wenn ich größere Sachen downloade, oder Flash Videos anschaue, bricht die 3G Verbindung nach kurzer Zeit automatisch ab. Hat jemand einen Rat?
use bluetooth or wifi sharing instead of usb..it works...
Hello, after 2 Month, i have still the same Problem. Have anybody an idea?
Reset TCP IP Stack
I tried using WMWIFIRouter. I was having the same problem, but it automatically reconnects again. Which was better but not quite there. On their FAQ though they recommended trying to reset the TCP/IP Stack. Here is the link to that: http://support.wmwifirouter.com/knowledge/KB0807021/
After doing that mine has only disconnected like once, which my other computers that work do. So I hope this works for you too. If it does post to say so.
Related
Hallo Zusammen,
ich habe folgendes Problem. Ich habe mir gestern das B&B 4.1 ROM aufgespielt. Läuft alles auch wunderbar bis auf meine O2 WAP FLAT.
Habe alle Proxy eingestellt sowie auch in der Reg AllowLSP sowie UAProf laut den Anleitungen in diversen Foren geändert. NICHTS tut sich.
Mit dem alten Rom von O2 lief alles problemlos. Ich kann aber per USB Verbindung mit dem Handy surfen nur nicht über GPRS… dann kommt der Fehler:
0x80072f78
Zugangspunkt wap.viaginterkom.de
Proxy: 195.182.114.52
Was kann ich noch machen?
i cant help you but i can transalte to english so others might find a solution:
(ich kann dir nicht helfen, aber ich kann dein post nach englisch übersetzen)
he wrote:
i have following problem: yesterday, i flashed B&B 4.1 ROM to my device. everything is working great except for my O2 WAP FLAT.
i set all proxies and also set AllowLSP and UAProf in registry according to manuals i found in various forums. NOTHING happens.
with the old O2 ROM everything worked without problems. I can access the internet using a USB connection but not via GPRS...if i try i get this error: 0x80072f78
access point wap.viaginterkom.de
proxy: 195.182.114.52
what else can i do?
Thx...
But nothing work's.....
DAMM IT
soardiac said:
i cant help you but i can transalte to english so others might find a solution:
(ich kann dir nicht helfen, aber ich kann dein post nach englisch übersetzen)
he wrote:
i have following problem: yesterday, i flashed B&B 4.1 ROM to my device. everything is working great except for my O2 WAP FLAT.
i set all proxies and also set AllowLSP and UAProf in registry according to manuals i found in various forums. NOTHING happens.
with the old O2 ROM everything worked without problems. I can access the internet using a USB connection but not via GPRS...if i try i get this error: 0x80072f78
access point wap.viaginterkom.de
proxy: 195.182.114.52
what else can i do?
Click to expand...
Click to collapse
1. Open Internet Explorer.
2. On the Tools menu, click Internet Options.
3. Click the Connections tab, and then click LAN Settings.
4. In the Local Area Network (LAN) Settings dialog box, click to select the Automatically detect settings check box, and then click OK.
5. Quit Internet Explorer.
6. Click Start, click Run, type cmd, and then click OK.
7. Type the following commands. Press ENTER after each command.
a. proxycfg -d
b. net stop wuauserv
c. net start wuauserv
d. exit
Hello,
can you help me please?
the charmer don't boot. It hangs at the bootscreen. at usb mode activesync dosent find the phone.
it shows.
ipl 2.06
spl 2.06.0000
gms 02.19.21
os 4.0.0.0
i want to flash the original firmware. how can i do?
greetings markus
Same problem pls an answer
Enter the bootloader mode and run official rom upgrade.
Bootloader Menu...
I can't make an update with the original firmware software. This Programm tolled me i must make a AktiveSync connetion. In Bootloader (CAM POWER Button) My computer find any USB device but activesync doesn't make a sync connection. Thats my problem. What can i do?
Greetings, Markus
Active sync wont make a connection when your in bootloader mode. The update program will work, it doesnt need active sync connection.
can you give me a link to the update?
I found it self. im so lucky because it do. sorry for my english. @ datenzwerg http://downloads.t-mobile.de/redire...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip damit sollte es funktionieren auch wenn er eine sync verbindung haben will die brauch er aber nicht ein fach ins bootmenu und da dann usb an stecken und am computer starten ;-) bei mir hats geklappt
hoffe h mal das es funzt...
ich werde es probieren mehr als kaputt kann es eh net werden. hab halt a bisserl CID Panik da ich eine TMOBILE Austria sperre habe.
werde berichten wie es gegangen ist.
mfg markus
wrong ventor id
the german update doesn't run. the programm tells me wrong ventor id. i will dry the austrian one.
http://www.t-mobile.at/privat/servi...ftware/_files/MDA_compactII_AKU2_0_Update.exe
greetings, markus
Solved the Problem
Hello,
i've solved the problem.
The German 3.3 Version can't be install by ventor check.
The Austria 2.0 Version can't be install by Active Sync check.
I used the ROM form The Austrian Update and the Software from the
German update Pack.
My Charmer have a useable ROM!!!
Greetings Markus
aaaaaaaaaaaaaaaaaaaaaaaaaaaa
irgendwie klappt dat bei mir nich so recht
könnt ihr mir genau beschreiben was ich zu machen hab
ich hab das selbe problem mda2 Tmobile nach einem flash versuch geht es aus dem boot nicht raus usw
gibt es kein affengriff oder sowat damit er von alleine hoch bootet
thx
mfg
srox
dank an shayd
ua ich habs dank an shayd
Originally Posted by shayd
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Hallo!
I had the same problem with the vendor Id and i tried to flash the austrian t-mob version ! It worked but at about 40% it saied error and now the bootloader goes on and within 5 sec it wents of! SO i cannot try to flash another time!
What can i do?
Hi folks!
I need some sort of mentor to get out all of the avaible performance from my smartphone.
I am a student from Germany and I have been waiting for a long time for the offical froyo update distributed per KIES. Update worked fine, but my big problem still exists:
My university has Wlan - no problems to join it with WPA-Personal. But:
There are two ways to get it running properly,
1) setting up a proxy skript
2) building a openvpn-connection
to 1)
I can set up the http-Proxy by hand but it is very uncomfortable, because at home i have to go all the way down through menus to switch the proxy off again in Wlan-Settings.
On top of that the market and all the apps are not working because i can only set up http-proxy, but icq needs socks5
which leads me to 2)
OpenVPN should be the silver bullet- but needs root.
ok, i am quite familiar with flashing, updating etc - but the community was growing as fast as nothing before. There are million ways to root your phone and guides who to get openvpn running. Some solutions only work for 2.1 - so what is the best way how to get openvpn on my galaxy froyo 2.2 ? MAybe anyone can effort some time on ICQ mentoring me ?
(use search-function, let me google it for you - posts plz avoid )
THX
just rooted my 2.2 with ratc (kaspersky thinks its a trojan!)
more info here: http://forum.xda-developers.com/showthread.php?t=803682
or yet simpler task would be downloading ryanza's oclf app or z4root app from the market install it, and root your phone on the fly!
EDIT: two posts in german language, but after that back to english, please scroll down
Ihr habt doch sicher eduroam, das braucht kein vpn und ist somit easy sich damit zu verbinden.
Also schau mal ob bei deiner schule das wlan netz eduroam vertreten ist, sollte aber bei jeder deutschen hochschule der fall sein.
So,
melde mich dann auch mal wieder.
1) Samsung Galaxy ist gerootet.
Erstes Problem:
War die Firmware Froyo 2.2 geliefert via KIES drauf, daher ging One-Klick Root von TGA-Gunman schonmal nicht. Die Update.zip wurde zwar auf das Phone gespielt und in den richtigen Modus gebootet, dann kam jedoch immer ein verification error.
Lösung:
Man benutze SuperOneClick zum rooten. Dauerte aber auch erstmal etwas, weil es nicht laufen wollte, Fehlermeldung war, dass .NET fehlt - Lösung: Win7 statt WinXP nutzen, steht ja auch beim Tool dabei
2) OCLF installiert, 1GB eingerichtet -> 1800 Punkte beim Benchmark, war schonmal gut
3) Busybox installiert, AdFree, Titanium Backup auch
___________________________________________________________
Derzeitiger Stand Uni:
Setze nach wie vor den Proxy per Hand, browsen ist möglich, Mail über IMAP geht auch.
Was alles nicht geht:
Skype, Market, Twitter-App, ICQ, Wetter-Apps, etc.
Telefongespräch mit dem WLAN-Admin ergab, das eduroam eingeführt werden soll, derzeit aber noch daran gearbeitet wird. Leider hat er selbst kein Android-Phone zum testen, meinte aber ohne Proxyskript wird es dann schwierig.
Derzeitig geht also nur noch OpenVPN, um mit allem rauszukommen. Das ist aber hier mit allen Finessen ausgestattet, TUN/TAP, LZO-Komprimierung etc - ist das alles läuffähig unter Android ?
Ok, if eduroam is not available at your school I'm not able to help.
The phone has a builtin vpn client with certs etc, but I have no experience with this client.
And because I'm not able to help anymore, we should get this thread back to english language.
Then please help me. There is Eduroam available at my UNI, but I can't get it to work. Any pointers on what should I do?
Just google edurom and the name of your university, that should do it.
It is basically corporate wpa2 with some specific settings.
ask their wizguys or get an unlimited dataplan?
Use the search button! Openvpn is meantioned in more as one Thread. There is a guide http://forum.xda-developers.com/showthread.php?t=793712
You don't need vpn for eduroam. Just your [email protected] and your password
Here's the deal. I have all the information needed (here it is: http://www.arnes.si/en/helpdesk/edu...nstructions-on-establishing-a-connection.html), but the problem is that I can't get to a point where I would be able to enter these settings. When I'm at my UNI, I check available wireless connections and (try to) connect to Eduroam, but the first thing it asks me is a credential storage password, which I don't have (it's not the one connected with my own user name).
I would think the problem is here:
CA Certificate of your home organization. If you use the client:
eduroam_client, CA certificate is automatically added when installing the client - it's not automatically added
SecureW2, CA certificate is added to the device after the first connection to the Eduroam network - if I understand correctly, SecureW2 is only for computers, not mobile phones
some other clients require to add the CA certificate manually before connecting to the Eduroam network - I have no clue how to do this
EDIT: Ok, I just found out that the credential storage password has nothing to do with WiFi or Eduroam, but it's for the phone. Here's a puzzler, I never set it, so how do I know what it is? LOL!
Newbie Need help,
I activated "turn all notifications off (exept alarm clock) - till deactivation" and now, i cant find a way to turn it on?
In the quick menu there is the button for this (attached file), but it will not be able, to push it.
Hilfe, ich habe mein "Telefon lautlos geschalten - bis zur Deaktivierung". Wie schalte ich die Töne wieder ein, bzw. was meint man "Bis zur Aktivierung"?
Ich finde keinen Button, der mir intuitiv zeigt, alles wieder einzuschalten...
Gruß Feusti
Ok, i got it, its a bug. In an other forum i read this:
Pawan Pratap Singh hat gesagt:
Hi all, same problem on Nexus 5
Fix:
I took the volume down to vibrate and then one more down to total silence. When I brought it up again, the priority was gone
Hi to all, I'm really desperate because I purchased this Bosion Android Headunit weeks ago and know everything apparently works but I have not Image of anything, even touchscreen works, and I don't think it's a hardware issue because everything started whit an "APP update". The problem I had like many users, was that I couldn't access to my Google Account, everytime when I've tried to sign-in, it took me out from the sign-in screen (like this
) Then the seller sent me a zip file with "os_update_KC1C0107-O01-1.0.4.9.1_20201209_130326_b1" and mcu .img file "mcu-202007280001KC1-1650". When I completed installing the os_update I lost Image, then he sent me another os_update to burn via phoenix card on an sd card, but I've never gained image again. The radio boots, and works, even I can make Bluetooth calls but I don't see anything (even there's backlight on the display). Can someone help me whit this issue? I've tried to get in recovery mode, but there's no way to enter it. Here's how it's working
Not MTCB, have requested Mod moves to Android head units forum, but is unable to move this thread.
carlos_graniel said:
Hi to all, I'm really desperate because I purchased this Bosion Android Headunit weeks ago and know everything apparently works but I have not Image of anything, even touchscreen works, and I don't think it's a hardware issue because everything started whit an "APP update". The problem I had like many users, was that I couldn't access to my Google Account, everytime when I've tried to sign-in, it took me out from the sign-in screen (like this
) Then the seller sent me a zip file with "os_update_KC1C0107-O01-1.0.4.9.1_20201209_130326_b1" and mcu .img file "mcu-202007280001KC1-1650". When I completed installing the os_update I lost Image, then he sent me another os_update to burn via phoenix card on an sd card, but I've never gained image again. The radio boots, and works, even I can make Bluetooth calls but I don't see anything (even there's backlight on the display). Can someone help me whit this issue? I've tried to get in recovery mode, but there's no way to enter it. Here's how it's working
Click to expand...
Click to collapse
Hi mate. I have logging into Google problems. After many tries of many things I looked at online and no images of updates and no real help anywhere I decided to contact the seller and he sent me this image Maybe it will help you as well. The way I have installed updates before is by copying the files to an SD-Card unplug the power from the back of the HU put the SD-Card in the GPS SD-Card slot then plug the power back in and turn it on. The system should recognize the update and start loading. I have not done mine yet. I literally just got the files sent to me. I looked up the file names and found your post.
I did this tonight and now my unit boots with a white screen like yours
It was working fine only Google sign-in didn't work.
Oh well, I will keep this post updated if I find a fix. If I don't post an update
that just means I have not found a solution yet.
Do you have resolve?
carlos_graniel said:
Hallo an alle, ich bin wirklich verzweifelt, weil ich dieses Bosion Android Headunit vor Wochen gekauft habe und weiß, dass anscheinend alles funktioniert, aber ich habe kein Bild von irgendetwas, sogar der Touchscreen funktioniert, und ich glaube nicht, dass es ein Hardwareproblem ist, weil alles mit einem angefangen hat "APP-Update". Das Problem, das ich wie viele Nutzer hatte, war, dass ich nicht auf mein Google-Konto zugreifen konnte, jedes Mal, wenn ich versuchte, mich anzumelden, wurde ich aus dem Anmeldebildschirm herausgeholt (wie hier
) Daraufhin schickte mir der Verkäufer eine Zip-Datei mit „os_update_KC1C0107-O01-1.0.4.9.1_20201209_130326_b1“ und mcu .img-Datei „mcu-202007280001KC1-1650“. Als ich die Installation des os_update abgeschlossen hatte, verlor ich das Image, dann schickte er mir ein weiteres os_update, um es per Phoenix-Karte auf eine SD-Karte zu brennen, aber ich habe nie wieder ein Image gewonnen. Das Radio bootet, und funktioniert, sogar ich kann Bluetooth-Anrufe tätigen, aber ich sehe nichts (auch wenn das Display hintergrundbeleuchtet ist). Kann mir jemand bei diesem Problem helfen? Ich habe versucht, in den Wiederherstellungsmodus zu gelangen, aber es gibt keine Möglichkeit, ihn aufzurufen. So funktioniert es
Click to expand...
Click to collapse
Hellp,please you can send me the Software? I have the same and not work.