Related
This Theme has been built for ease of use and for all relevant Information always on view.
It is made up of Skins for:
Wisbar Adv3
Wisbar Advance Desktop
Tsk theme
Phone Dialler ( has all features included,smart dialling picture ID, etc)
Calculator
WMP
SPB Time
S2U2 ( skinned both clock sets )
It should be noted that any non generic calculators or phones should be uninstalled before applying these new ones and a soft reset after installation.
For a closer look go to
http://www.pocket-pc-visuals.com/OnyxP.jpg
All Downloads are at these url's
http://www.pocket-pc-visuals.com/Onyx.rar
http://www.pocket-pc-visuals.com/OnyxPhoneDialer.CAB
http://www.pocket-pc-visuals.com/OnyxS2U2.rar
http://www.pocket-pc-visuals.com/OnyxTime.rar
looks good.
Going to give some a try.
Edit: Can you convert your 2007 word document to a earlier release. I dont have Office 2007...yet.
bridic said:
looks good.
Going to give some a try.
Edit: Can you convert your 2007 word document to a earlier release. I dont have Office 2007...yet.
Click to expand...
Click to collapse
I didn't even think about that anyway here is the Text you need
GJ, looks pretty good
grzegorz10 said:
I didn't even think about that anyway here is the Text you need
Click to expand...
Click to collapse
Thanks, can you re-post the S2U2 instructions also.
bridic said:
Thanks, can you re-post the S2U2 instructions also.
Click to expand...
Click to collapse
Sure not a problem just had to make them up
Hey George,
Finally got my Tilt so I am in this forum now. WAD is locking up my device. WA3 is OK but once I start navigating through the pages in WAD, within two minutes I have to SR. Didn't want to do a clean install but may have to and let you know if the problem is still there.
Rgds
mcfarlan said:
Hey George,
Finally got my Tilt so I am in this forum now. WAD is locking up my device. WA3 is OK but once I start navigating through the pages in WAD, within two minutes I have to SR. Didn't want to do a clean install but may have to and let you know if the problem is still there.
Rgds
Click to expand...
Click to collapse
Hi to you to. I don't know if this is the problem but with the meter for storage car I've found that if you pull the storage card out it will throw WAD , so i just shut off if i need to remove the storage card. Other than that a rellocatin of that meter to read something else may be needed
GiZZy said:
GJ, looks pretty good
Click to expand...
Click to collapse
Tks for the words
Very nice Thankssssssssssssss. Can you psShutXP Skin make add more?
Sorry for my English
ancola66 said:
Very nice Thankssssssssssssss. Can you psShutXP Skin make add more?
Sorry for my English
Click to expand...
Click to collapse
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.
grzegorz10 said:
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.
Click to expand...
Click to collapse
Hi Gregory,
Is there a specific way to Cancel out of this? Sometimes I can get out of it but most times I have to turn off and turn back on. I think a Cancel option would be nice here...
mcfarlan said:
Hi Gregory,
Is there a specific way to Cancel out of this? Sometimes I can get out of it but most times I have to turn off and turn back on. I think a Cancel option would be nice here...
Click to expand...
Click to collapse
if your talking about the logoff page there is a cancel at the bottom
grzegorz10 said:
Im not sure what you mean but this is not a psShutXP Skin. It's part of the WAD and is a proper Shutdown, Logoff and Soft Reset with button animation
something that can't be done in psShutXP, it's only a stagnet picture where this is not.
Click to expand...
Click to collapse
I know, but I not use WA3 and WAD. I Want psShutXP Skin ( I use Canculator Skin, Dialpad Skin, SpbTime Skin and S2U2 Skin )
ancola66 said:
I know, but I not use WA3 and WAD. I Want psShutXP Skin ( I use Canculator Skin, Dialpad Skin, SpbTime Skin and S2U2 Skin )
Click to expand...
Click to collapse
Sorry I won't be making this psShutXP skin, theres just nothing to them.
good job !
but when I tap on "menu", nothing happen ... I can't see the other pages !
monamibouli said:
good job !
but when I tap on "menu", nothing happen ... I can't see the other pages !
Click to expand...
Click to collapse
Press and hold on menu then select properties, under Action should be Toggle Dock and under Control it should be Menu. If thats all as it should be, then have you put the folders as i instructed, both as they are into Themes/Desktop/ if you've put them any where else it would not work.
Let me know how you go as i really did make this as easy to put on and work as i could do
another LNK
all N 1 file
http://www.4shared.com/file/40219243/26f10b6e/Onyx.html
Thank you very much for your good job I like this thems so much
jakkrith said:
Thank you very much for your good job I like this thems so much
Click to expand...
Click to collapse
I'm Glad you like it so much it was built to be as user friendly as possible
As seen in this rom:
http://forum.xda-developers.com/showthread.php?t=413820
the glowing tf3d bar.
has anyone already made on like this or can anyone make it?
i would realy like it, but i also like my current rom who does not have that theme.
Thanks
Somebody else already did it...I really don't know where I get this file in the Diamond threads...but here it is(all credits to it's original maker...)
Caspertje19 said:
Somebody else already did it...I really don't know where I get this file in the Diamond threads...but here it is(all credits to it's original maker...)
Click to expand...
Click to collapse
sweet thanks,
umm.. i have to use [APP][26.07.08] Diamond TF3D Config 0.6.7
to enable this theme right?
is it reversible ?
anheuer said:
sweet thanks,
umm.. i have to use [APP][26.07.08] Diamond TF3D Config 0.6.7
to enable this theme right?
is it reversible ?
Click to expand...
Click to collapse
yes it is...in the app there is a tab "Restore Default" if you press it all come back normal
alfoalfo said:
yes it is...in the app there is a tab "Restore Default" if you press it all come back normal
Click to expand...
Click to collapse
cool.
thanks for the help guys!!!!!
no problem man !!!
Does this include the Calendar tab?
Cheers
Rowan
seems to be a cab file so no need for tf3d config tool
umm, it does have an icon for the caller tab.
but i dont have the calander tab.
try it.
its a cab so you can remove .
dont forget to disable the tf3d today plugin first
Works fine and looks cool. Is anyone able to make the tab for calendar too?
Cheers
Rowan
Actually, the post at the bottom of this page has just the job: http://forum.xda-developers.com/showthread.php?t=421435&page=7
Cheers
Rowan
Hello guys. This is a request thread. When you are at the home of the TF3D if you touch the numbers you go to the clock settings, however I would like to disable the action so it just do nothing.
Is it posible to do ??
Has anyone done it before?
Thankx!!
charly_mx said:
Hello guys. This is a request thread. When you are at the home of the TF3D if you touch the numbers you go to the clock settings, however I would like to disable the action so it just do nothing.
Is it posible to do ??
Has anyone done it before?
Thankx!!
Click to expand...
Click to collapse
I would like this also. I keep hitting it by accident.
and when you try to see the appointments i just go to the clock properties... i just want to disable that action, is it posible via manila editing?? or its a deeper fix?
Me two. Can anyone help?
Agree. Me too. This is so boring. How could we block this clock when we touch it?
Please can anyone help?
Maybe the soft SSMAPa could fix this issue.
arturobandini said:
Agree. Me too. This is so boring. How could we block this clock when we touch it?
Please can anyone help?
Maybe the soft SSMAPa could fix this issue.
Click to expand...
Click to collapse
Yes it can, I changed the action to startup tomtom, but that is also annoying because you keep hitting it accidentaly...
SSMapA
yes, people, use ssmapa, you can change click link location to any other one.
Thank you.
Works like a charm...
No action when clicking on TF3D clock
Use SSMaPa app and link 'Time click' to PrgDoNothing.exe
[URL="http://forum.xda-developers.com/showthread.php?p=2941662&highlight=prgdonothing#post2941662"]http://forum.xda-developers.com/showthread.php?p=2941662&highlight=prgdonothing#post2941662[/URL]
Ater all, they made it
Tomasecek said:
Use SSMaPa app and link 'Time click' to PrgDoNothing.exe
[URL="http://forum.xda-developers.com/showthread.php?p=2941662&highlight=prgdonothing#post2941662"]http://forum.xda-developers.com/showthread.php?p=2941662&highlight=prgdonothing#post2941662[/URL]
Click to expand...
Click to collapse
Well this the best solution.
great work..
thanks
It works just great!!!
Thanks for the replies guys!
Hi everyone!
can someone change WM 6.5 lock, so when I slide it to left it opens start menu and when i slide it to right it opens home screen, or tell me how to do it?
does something like that already exist?
thanks for reply!
I see there is no interest in this thread...
i did not heard about it yet...
Don't know if it's possible without the lock API opened up.
blaz.andrejcic said:
Hi everyone!
can someone change WM 6.5 lock, so when I slide it to left it opens start menu and when i slide it to right it opens home screen, or tell me how to do it?
does something like that already exist?
thanks for reply!
Click to expand...
Click to collapse
its has something to do with the CPR of the lockscreen
xda2_haseeb said:
its has something to do with the CPR of the lockscreen
Click to expand...
Click to collapse
can you tell me exactly which file do I need to edit?
I'll try to do it myself...I know basics of programing (finished 4 years of computer science school)
\Windows\LS_LockScene_480x640.cpr
(the filename depends of course on your screens' resolution)
I'm going to look into it myself.
Hi, I've searched but I could possibly be using the wrong search terms.
Looking to change the text that displays in the banner where it would say AT&T 3G? I've seen it done just now can't find it.
Any help appreciated, thanks.
ccmxda said:
Hi, I've searched but I could possibly be using the wrong search terms.
Looking to change the text that displays in the banner where it would say AT&T 3G? I've seen it done just now can't find it.
Any help appreciated, thanks.
Click to expand...
Click to collapse
Check out the screenshot below...see the custom title in the top left under the start menu, is that what you're talking about? If so, the attached cab is what you'll need to put your own custom title there...just install and run it, it's nothing but a simple text box where you can enter whatever you're heart desires
Does this work on Windows Mobile 6.5? On any service carrier?
develop1 said:
Does this work on Windows Mobile 6.5? On any service carrier?
Click to expand...
Click to collapse
Yes, it's been used successfully on many different devices on many different carriers.
Thanks, that worked for the carrier name on the s2u2 lockscreen, but I guess Energy is doing something on the Today banner to override both the Personalizer and the Carrier.
ccmxda said:
Thanks, that worked for the carrier name on the s2u2 lockscreen, but I guess Energy is doing something on the Today banner to override both the Personalizer and the Carrier.
Click to expand...
Click to collapse
Gotcha, or is that Energy ROM 6.5.3? That may be the difference too....I know it works on 6.5, but I'm not sure about 6.5.3
sirphunkee said:
Gotcha, or is that Energy ROM 6.5.3? That may be the difference too....I know it works on 6.5, but I'm not sure about 6.5.3
Click to expand...
Click to collapse
This worked for me on 6.5.3 Thanks!!!
Any chance you can share your slider icons?
Doinshots said:
This worked for me on 6.5.3 Thanks!!!
Any chance you can share your slider icons?
Click to expand...
Click to collapse
They actually came as part of a theme, done by xda memeber s2w, you can find that theme on THIS page where he has a bunch, it's called "Dark Revised"
I have installed "Personalizer_3.1.cab" on my TP2 with orignal wm6.5 rom with sense 2.5...
But I can't finde shortcut named Personalizer in my Start Menu...
Can anyone tell med Step by Step what to do?
that screen shot you have
sirphunkee said:
Check out the screenshot below...see the custom title in the top left under the start menu, is that what you're talking about? If so, the attached cab is what you'll need to put your own custom title there...just install and run it, it's nothing but a simple text box where you can enter whatever you're heart desires
Click to expand...
Click to collapse
wher can i find that for my tp2 I really like your tp2 screen
bigboy38 said:
wher can i find that for my tp2 I really like your tp2 screen
Click to expand...
Click to collapse
Check out my post 2 above yours there... the look you're seeing is mostly due to a theme called "Dark Revised" by s2w, and it's available on that page I linked to along with several others he's done. The taskbar icons at the top are from Spike's popular MicNeo set, varient_V2 to be exact, I've attached the cab for that below.
If you are using the Energy Rom....
ccmxda said:
Thanks, that worked for the carrier name on the s2u2 lockscreen, but I guess Energy is doing something on the Today banner to override both the Personalizer and the Carrier.
Click to expand...
Click to collapse
That is a feature you can edit on the energy Rom. If you are using the one with cookie home tabs, all you have to do is go to the cookie home tab editor and go to advanced, at the very bottom is a choice to change the text that appears in that area. Just click on that box, and it will open the editor to change that text.
Hope that helps.
Perfect, thanks!
ccmxda said:
Perfect, thanks!
Click to expand...
Click to collapse
Glad I could help, mate.