Related
I'm a long-time fan of NavNGo's iGo navigation solution, and since yesterday also a happy owner of an X1. However, these two are currently not on speaking terms with each other. Installation seems to work fine, but clicking the application icon results in, well, nothing.
Searching the net in general and this forum in particular has shown me that this has been a problem with a number of HTC devices. I have tried a couple of the proposed solutions for some of them, but none have worked so far. Has anyone managed to get iGo 8 (or, for that matter, 2006 - I have both) running on the X1 and, if so, how? Any help would be appreciated.
did you update to the latest version with the contentmanager? also try to disable agps on your x1 and try again, but what also can happen is that it dont likes the WVGA Resolution for that i dont have an solution.
regards charon
cHarOn99 said:
did you update to the latest version with the contentmanager? also try to disable agps on your x1 and try again, but what also can happen is that it dont likes the WVGA Resolution for that i dont have an solution.
Click to expand...
Click to collapse
Using latest version. I read in other forums about disabling agps, but saw other posts claiming that was not necessary with the latest version. Either way, if I'd want to try it, how do I disable agps?
I think what you have to do is find a skins that is wvga compatible for it. I've been looking all over the net to find one, but I cant. I'm sure this is the problem.
n4v1n said:
I think what you have to do is find a skins that is wvga compatible for it. I've been looking all over the net to find one, but I cant. I'm sure this is the problem.
Click to expand...
Click to collapse
Check the link below.
iGO8 Artwork
emwdava said:
Check the link below.
iGO8 Artwork
Click to expand...
Click to collapse
I've seen this site before, but when you look at the included resolutions in the folders they only have 400x240.
Download the skin with 400x240 resolution and modify the sys.txt to include the following lines
[interface]
resolution_dir="400_240"
vga=1
Dare1 said:
Download the skin with 400x240 resolution and modify the sys.txt to include the following lines
[interface]
resolution_dir="400_240"
vga=1
Click to expand...
Click to collapse
Thanks! I was wondering this whole time why they were all 400x240!
n4v1n said:
Thanks! I was wondering this whole time why they were all 400x240!
Click to expand...
Click to collapse
well.. Did it work?
I'm also a fan of iGO8 and I'm getting my X1 tomorrow.
So I really hope it works ok.
one thing you could try is to add the sys.txt lines without using the skin. Does the original skin resize if you do that?
emwdava said:
well.. Did it work?
I'm also a fan of iGO8 and I'm getting my X1 tomorrow.
So I really hope it works ok.
one thing you could try is to add the sys.txt lines without using the skin. Does the original skin resize if you do that?
Click to expand...
Click to collapse
Oh sorry for the mix up, I've basically been preparing all my software that I was using on my omnia to use on my X1 that I will get in a few days, So I won't be able to test this yet, but I believe that the skin was the only think that would've been a problem on the x1, but now it's solved. If it doesn't work even with the skin, I have tomtom7 that I know works on the x1 (according to other owners). But I can't wait to have mine!!!
n4v1n said:
Oh sorry for the mix up, I've basically been preparing all my software that I was using on my omnia to use on my X1 that I will get in a few days, So I won't be able to test this yet, but I believe that the skin was the only think that would've been a problem on the x1, but now it's solved. If it doesn't work even with the skin, I have tomtom7 that I know works on the x1 (according to other owners). But I can't wait to have mine!!!
Click to expand...
Click to collapse
Hi to everybody,
I thought about using the Garmin, but if the Igo could be used on the X1 it would be better still.
Do you have novelty?
Thanks
message deleted.....
To you this software works?
http://www.virtualspaghetti.com/index.php?index=31&language=en
Would like to know also, the thought of such a large screen and scribbling notes... I think this would swing me to the HD over from the Pro!
I don't know this software yet, but you answered your own question by posting the link.
Look at http://www.virtualspaghetti.com/index.php?index=30&language=en
and search for:
New Version 2.5:
* Now Compatible with 240x400 screens (WQVGA)
Samsung i900 Omnia,...
* Now Compatible with 480x800 screens (WVGA)
Xperia X1 Sony Ericsson, HTC Touch HD,...
Click to expand...
Click to collapse
it installs fine, it is compatable with the HD (version 2.5 supports 480x800)...
...but, after installing the program on the HD, i realised it messed up the screen, when you try and make a note, its not calibrated, you tap one part of the screen but it thinks your touching a different part.
CWempe said:
I don't know this software yet, but you answered your own question by posting the link.
Look at http://www.virtualspaghetti.com/index.php?index=30&language=en
and search for:
Click to expand...
Click to collapse
What happens to me is this:
xdaman85 said:
it installs fine, it is compatable with the HD (version 2.5 supports 480x800)...
...but, after installing the program on the HD, i realised it messed up the screen, when you try and make a note, its not calibrated, you tap one part of the screen but it thinks your touching a different part.
Click to expand...
Click to collapse
Mike73 said:
What happens to me is this:
Click to expand...
Click to collapse
i guess its not compatable with the HD, the resolution is supported, but its probably another problem, the website mentions the x1 is supported and doesnt mention the HD. im guessing this is the reason why. You will just have to wait untill they release something that works for us.
All I know is that the webpage says it is kompatible to the hd. (see attachment)
But if you got problems then there may be a bug.
Or they didn't test the new version on the hd.
Anyway.
I don't have this program.
And I don'T got my hd yet.
The developers claim this works on the Sony Ericsson Xperia X1 which is also WVGA, but I have the exact same problems as reported here.
News from the developers...
---------------------------------------------------
Hi,
First of all, sorry for the delay.
We have discovered some screen problem with the Touch HD.
This problem is know and will be fixed in our next release(available soon).
Best Regards,
Virtual Spaghetti Support.
xdaman85 said:
it installs fine, it is compatable with the HD (version 2.5 supports 480x800)...
...but, after installing the program on the HD, i realised it messed up the screen, when you try and make a note, its not calibrated, you tap one part of the screen but it thinks your touching a different part.
Click to expand...
Click to collapse
I do have exactly this effect on my XPERIA X1. Hopefully the developers from spagetti can fix that because I'd really like to use the soft.
Piggybacking off of jug6ernaut's "New Facebook App" thread. Here's a cab for the Netflix app from the 21169 WM6.5 ROM brought to us by Da_G.
Unlike the Facebook app, I don't think this one will work for QVGA since it didn't work on my StarTrek.
Doesn't work on my Touch Pro (VGA) ... "This resolution is not supported."
I installed a Netflix VGA app successfully on my TP that I got directly from Microsoft Live (of all places) - it works well.
ItsDon said:
I installed a Netflix VGA app successfully on my TP that I got directly from Microsoft Live (of all places) - it works well.
Click to expand...
Click to collapse
Mind posting it?
EDIT: Not sure if this is the same app, but this is what can be found from microsoft.
lotion said:
Mind posting it?
EDIT: Not sure if this is the same app, but this is what can be found from microsoft.
Click to expand...
Click to collapse
That's the one!
lotion said:
Doesn't work on my Touch Pro (VGA) ... "This resolution is not supported."
Click to expand...
Click to collapse
That's wierd. I haven't switched back to Lantis OS yet (still on WM6.5) but I'll see if there's anything I can do. If anyone wants the raw files to try on their own, I'll post them up.
lotion said:
Doesn't work on my Touch Pro (VGA) ... "This resolution is not supported."
Click to expand...
Click to collapse
very odd...considering its ripped from a VGA device...lol
same here
wont work on touch pro....resolution not supported
Just out of curiosity... does this app just manage the queue or let you view your watch instantly choices?
Anybody who knows if this magnificent, new 3,0 release is available as a panel for the X1?
I don't see why there is such need.. Do you have it installed on the phone?
Sfkn2 said:
I don't see why there is such need.. Do you have it installed on the phone?
Click to expand...
Click to collapse
I would also like it as a panel because I still want to use my original home screen ie the ms one showing various plugins.
Sfkn2 said:
I don't see why there is such need.. Do you have it installed on the phone?
Click to expand...
Click to collapse
Yes, I do have it installed on both my HTC HD and the X1. Reason I ask for it as a panel, is the same as for intrancer.
mavpro said:
Yes, I do have it installed on both my HTC HD and the X1. Reason I ask for it as a panel, is the same as for intrancer.
Click to expand...
Click to collapse
No, they still have not developed a SPM Mobile Shell 3.0 Panel.
@ sfkn2: why I wouldn't need to have it as a panel? We have panels for this reason, have multiple homes and be cool!
yep I m waiting for a way to make this a panel before I go on to install it
Hi
Has anyone tried using this with mtoday. Can you have the standard WME today screen as well as SPB Mobile Shell 3 on your second profile?
This would be awesome.
Thanks
hello,
i've got tomtom 7 installed on my HD2 but the keyboard is extremely small. any idea how to fix that? changing in to large in preferences doesn't make any difference, it's about the size of the status bar on the bottom. the same version of tomtom on my i-mate 9502 works fine. any ideas? thanks.
Make room for a small one
Ironic as it sounds but go into your settings and change the keyboard to smal... its the same on the HD from what I can remember.. If it dont wok dont flame me as I dont own either device but did this on my mates HD and it worked ;-)
didn't work for me.
You need wvga version instead of qvga
I have tomtom 7.916 and the keyboard is perfect. Maybe you have an old tomtom version ?
I have found by using the BSB tweeks mod and enable the TOM TOM Prog to turn to landscape when you turn phone, the keyboard is made much much bigger
thanks for your replies.
small keyboard is the same as large, doesn't matter what i chose.
also, i don't know where i can get the wvga version as the only one i've got is the qvga.
i have tomtom 7.450 which is not newest but it worked fine on my vga screen in i-mate 9502.
I have a cab for 7.9 but it won't acknowledge my perfectly legal map.
esiu said:
thanks for your replies.
small keyboard is the same as large, doesn't matter what i chose.
also, i don't know where i can get the wvga version as the only one i've got is the qvga.
i have tomtom 7.450 which is not newest but it worked fine on my vga screen in i-mate 9502.
Click to expand...
Click to collapse
Look here for tomtom vga and qvga versions:
http://forum.xda-developers.com/showpost.php?p=4949921&postcount=13
there are also some bluetooth problems with tomtom.
read here for a fix to get bluetooth working again
http://forum.xda-developers.com/showpost.php?p=5021854&postcount=50
Cybertom said:
You need wvga version instead of qvga
Click to expand...
Click to collapse
Hi
Use the VGA version it works perfect size KB.
Good luck
Cybertom said:
Look here for tomtom vga and qvga versions:
http://forum.xda-developers.com/showpost.php?p=4949921&postcount=13
there are also some bluetooth problems with tomtom.
read here for a fix to get bluetooth working again
http://forum.xda-developers.com/showpost.php?p=5021854&postcount=50
Click to expand...
Click to collapse
thanks for this but this tomtom doesn't work with my map... any suggestions? thanks.
esiu said:
thanks for this but this tomtom doesn't work with my map... any suggestions? thanks.
Click to expand...
Click to collapse
We're not allowed to post links to warez sites, but if you were to look at the usual suspect ppc web sites I'm sure there are ways to activate your maps
As far as I know TomTom don't officially support the HD2 yet, but there are ways around this. If you have a legit map and legit TomTom software I personally don't have any issues with you using an alternative source for your downloads.
wizzzard said:
We're not allowed to post links to warez sites, but if you were to look at the usual suspect ppc web sites I'm sure there are ways to activate your maps
As far as I know TomTom don't officially support the HD2 yet, but there are ways around this. If you have a legit map and legit TomTom software I personally don't have any issues with you using an alternative source for your downloads.
Click to expand...
Click to collapse
thanks very much, sorted myself out