I'm a long-time fan of NavNGo's iGo navigation solution, and since yesterday also a happy owner of an X1. However, these two are currently not on speaking terms with each other. Installation seems to work fine, but clicking the application icon results in, well, nothing.
Searching the net in general and this forum in particular has shown me that this has been a problem with a number of HTC devices. I have tried a couple of the proposed solutions for some of them, but none have worked so far. Has anyone managed to get iGo 8 (or, for that matter, 2006 - I have both) running on the X1 and, if so, how? Any help would be appreciated.
did you update to the latest version with the contentmanager? also try to disable agps on your x1 and try again, but what also can happen is that it dont likes the WVGA Resolution for that i dont have an solution.
regards charon
cHarOn99 said:
did you update to the latest version with the contentmanager? also try to disable agps on your x1 and try again, but what also can happen is that it dont likes the WVGA Resolution for that i dont have an solution.
Click to expand...
Click to collapse
Using latest version. I read in other forums about disabling agps, but saw other posts claiming that was not necessary with the latest version. Either way, if I'd want to try it, how do I disable agps?
I think what you have to do is find a skins that is wvga compatible for it. I've been looking all over the net to find one, but I cant. I'm sure this is the problem.
n4v1n said:
I think what you have to do is find a skins that is wvga compatible for it. I've been looking all over the net to find one, but I cant. I'm sure this is the problem.
Click to expand...
Click to collapse
Check the link below.
iGO8 Artwork
emwdava said:
Check the link below.
iGO8 Artwork
Click to expand...
Click to collapse
I've seen this site before, but when you look at the included resolutions in the folders they only have 400x240.
Download the skin with 400x240 resolution and modify the sys.txt to include the following lines
[interface]
resolution_dir="400_240"
vga=1
Dare1 said:
Download the skin with 400x240 resolution and modify the sys.txt to include the following lines
[interface]
resolution_dir="400_240"
vga=1
Click to expand...
Click to collapse
Thanks! I was wondering this whole time why they were all 400x240!
n4v1n said:
Thanks! I was wondering this whole time why they were all 400x240!
Click to expand...
Click to collapse
well.. Did it work?
I'm also a fan of iGO8 and I'm getting my X1 tomorrow.
So I really hope it works ok.
one thing you could try is to add the sys.txt lines without using the skin. Does the original skin resize if you do that?
emwdava said:
well.. Did it work?
I'm also a fan of iGO8 and I'm getting my X1 tomorrow.
So I really hope it works ok.
one thing you could try is to add the sys.txt lines without using the skin. Does the original skin resize if you do that?
Click to expand...
Click to collapse
Oh sorry for the mix up, I've basically been preparing all my software that I was using on my omnia to use on my X1 that I will get in a few days, So I won't be able to test this yet, but I believe that the skin was the only think that would've been a problem on the x1, but now it's solved. If it doesn't work even with the skin, I have tomtom7 that I know works on the x1 (according to other owners). But I can't wait to have mine!!!
n4v1n said:
Oh sorry for the mix up, I've basically been preparing all my software that I was using on my omnia to use on my X1 that I will get in a few days, So I won't be able to test this yet, but I believe that the skin was the only think that would've been a problem on the x1, but now it's solved. If it doesn't work even with the skin, I have tomtom7 that I know works on the x1 (according to other owners). But I can't wait to have mine!!!
Click to expand...
Click to collapse
Hi to everybody,
I thought about using the Garmin, but if the Igo could be used on the X1 it would be better still.
Do you have novelty?
Thanks
message deleted.....
Related
Find this from other forum. Work fine on my HTC Trinity.
More screenshot
oh its taing too much of real estate My screen area!
Does it support VGA?
Backlight working ?
Does the backlight button work with this release ? In the other version your device will freeze at bootup....anyone tested already ?
btw: seems to be the same version like in the other post....
Cheers
Edit:
Could not wait Just installed, no problems on my device (Artemis) and Backlight-button. Looks cool.
What i don't like: in the GUI-Config you can only add apps from the Programs-directory (for example: when you want to add solitaire (which is stored in "Games"), you need to move the shortcut into the Programs-Folder....or you need to add the registry-key in HKCU\Software\HTC\HTCPlus\Shortcuts manually....or am i wrong ?
But in the end.... i think i stay with HTC Home....
Works on Artemis?!
petervbeck said:
Just installed, no problems on my device (Artemis) and Backlight-button. Looks cool.
Click to expand...
Click to collapse
It's interenting that you had no problems. I also installed on my Artemis with official HTC Asia WM6 rom and yes, it works until you switch off the device. Than you can never switch it on again, only by soft reset with stylus!
So I uninstalled the prog quickly...
Otherwise it would be nice to have it on Today screen, so if someone could construct a bug-free cab from the extracted files I would really welcome it!
cheers
Anybody tried this on a Touch?
The "other" Version (as petervbeck says) in the Hermes Forum doesn't work on the Touch.
I doesn't work on my Touch!
Working on Wizard
HTC Plus is Working on Wizard!
just 2 bugs:
when you select battery status in Customization and you tab on the symbol you go to wifi settings and backlight is not working
steph
ctibor said:
It's interenting that you had no problems. I also installed on my Artemis with official HTC Asia WM6 rom and yes, it works until you switch off the device. Than you can never switch it on again, only by soft reset with stylus!
Click to expand...
Click to collapse
I'm using Tom's 4.1 full and as i said, no problems. But in fact- i like HTC Home more, but that's my opinion.... on my device i had no problem with hanging boots or something similar, i tested all the buttons....but not for a long time...then i switched back to HTC home...that's my expirience with Plus..
Cheers
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Thanks! Keep the great work!
fluxist said:
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Click to expand...
Click to collapse
I just installed your cab on my mogul. It works great. But I decide to keep using HTC Home.
fluxist said:
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Click to expand...
Click to collapse
Is the "aplication launching pad" of HTC plus finger-scrollable, or the only way to scroll is by tapping on the arrow?
TIA
Can anyone confirm that it uses less memory than HTC Home?
fluxist said:
How about a little credit where credit is due? This is the same version I posted in the Hermes forum here: http://forum.xda-developers.com/showthread.php?t=326689
Today I posted an updated version that should help some people who had problems with it.
This tool was non-functional when I found it. I had to dissassemble the dlls to find out why the utility would not work (missing HTCImgCodec.dll).
fluxist
Click to expand...
Click to collapse
fluxist
nobody seems to answered earlier question, does this support vga?
cheers
how do you remove HTC plus!? I like it but it freezes my PPC6700 sometimes. I don't use it but I cannot remove it from the today settings menu. Thanks
I do not know if this plugin supports VGA. If you have a VGA device, try it out and let us know.
fluxist
not working in my Touch......
please help me out....
pranavd1980 said:
not working in my Touch......
please help me out....
Click to expand...
Click to collapse
Same, just adds a menu to my today settings, but no new today screen
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
billu said:
Anyone tried this app on the athena? (as it also has an accelerometer) If so does it work?
http://s-k-tools.com/index.html?m_util.html#gsen
Would be brilliant if it works but my hopes aren't high as I couldn't find anything on the topic.
Click to expand...
Click to collapse
looks like a nice tool, but after I installed on my Ameo I tried to use GSen Version 1.40.
But a window popup with following message :
cannot connect to GSensor (1)
mhh, doesn't run on Ameo ... and delete it ...
Ameo, t-mobile ROM version 6
btw: I've now asked the developer why GSen is not running on Ameo ... hope I get an answer..
Accelerometer
Hey,
I've installed it on my HTC Advantage X7510 with WM6.! Professional, and I can confirm that it works.
When I'm in the today screen and I turn the PDA it does turn in Landscape and Portrait mode with no problem great at last it works.
Thanks for the link if anybody what's me to try anything please let me known.
Thanks
Gigino
I am happy for you gigino, but I am in the same boat as palmchen (have a X7500 with t-mobile WM6 ROM).
Perhaps the interface to the sensor is slightly different between WM6 and 6.1
I am sure it can't be that difficult to access it from WM6. Hopefully the developer will be able to implement it or give some clue which will assist some brainbox from this community in hacking this version to get working with WM6. In my eyes this is one of those killer apps.
I tried this on wm6.1, and had the same error message.
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
sergiopi said:
IMO the answer is simple: it works using HTC VUEFLO .dll. X7510 has those dll, x7500 doesn't!
In AP4 or AP5 it will work
Click to expand...
Click to collapse
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
cktlcmd said:
Thanks for this. It is a great find. Works well with my X7510.
This is a must have application for the X7510. It is just amazing.
Click to expand...
Click to collapse
For some it is a must have. For others, it is an annoyance and irritation.
only because we can't get it working!
Sorry guys, we doesn´t have these devices for testing.
We just was surprised about the info, our tool is working on HTC Advantage X7510.
Also we not know the reason why it is not working on HTC Advantage X7500.
Possible reasons:
- missing/different software driver
- different ROM/ACU version
- missing needed hardware
As i said, we cannot test because of missing hardware.
billu said:
only because we can't get it working!
Click to expand...
Click to collapse
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
eaglesteve said:
Not because of that. It was working all right.
I hated this auto rotate thing because 9 out of times the rotate happens against my wish, and it slows my device.
After the initial few minutes of novelty, I was already wanting to switch it off.
Click to expand...
Click to collapse
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
AnnaW said:
for this exit a include/exclude list. check the diamond forum.
http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
Click to expand...
Click to collapse
Thanks for the info, but I still far prefer assigning rotate screen to a hardware button and just press that when I want to rotate.
Palmchen said:
mhh, simple question?
could you please provide the new vueflo.dll for the old devices ?
If it only a dll to change that should be not a problem, or ?
btw: I've asked the developer, but he told me that he is to busy and have no time in the moment to update this programm.
Click to expand...
Click to collapse
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
sergiopi said:
No, I don't, there are SOME dll, you can find it in the AP4 / AP5 ROM. I agree, the rotation is too slow and the screen rotation is useless and time consuming 90% of time. My brain is much faster in image rotation and my finger is slower than brain but acts only when needed
Click to expand...
Click to collapse
mhh, that makes me sadly ...
I would wish it will go faster and will run on my device (german tmobile WM6) ..
sergiopi said:
the rotation is too slow
Click to expand...
Click to collapse
Screen rotation is fast on mine. Might be ROM or today screen related in yours.
The speed you can change in settings: #timeout(value) - default value 1000 ms
Check http://forum.xda-developers.com/showthread.php?p=2351034#post2351034
X7500 (Ameo) with AP4 or AP5
I have tried it, but still I get the message that the gsensor cannot be found.
Edit:
Oeps it just start working. I noticed the veuflo was disabled.
can anyone post those .dll files, so others can use them? thanks
Which one is the best? Advantages and disadvantages?
Or is there another program that is even better?
Regards!
Used both.. ended up using MobileMagic instead
Thread about it here
http://forum.xda-developers.com/showthread.php?t=449654
I am sure that was to be the next post
Ofiaich
why is it when i try to add this to my phone i get a messages stating that the phone needs a newer version of the Microsoft COmpact Framework than the version on my HD?
johseph said:
why is it when i try to add this to my phone i get a messages stating that the phone needs a newer version of the Microsoft COmpact Framework than the version on my HD?
Click to expand...
Click to collapse
Not trying to be funny but did you not just then aswer your own question???
Have you installed version 3.5 of framework?? ....if not just do so (you can find the .cab around here)
umexed said:
Used both.. ended up using MobileMagic instead
Click to expand...
Click to collapse
Hi umexed!
I am trying to decide which one to install - gyrator OR mobilemagic, unfortunately I really don't have the time to read tens of pages of posts just for this
Since you seem to be familiar with both (and gsen on top! ) can you please describe the reason(s) you prefer mobilemagic? Thank you so much!
Cheers!
Dan
PS: I also checked the programs from your signature and I saw a really nice set of WM icons for bluetooth, wifi and the rest - do you mind sharing the source with us? Thanks again!
MobileMagic also supports button mapping (and other sensors).
Works very well.
hello,
i've got tomtom 7 installed on my HD2 but the keyboard is extremely small. any idea how to fix that? changing in to large in preferences doesn't make any difference, it's about the size of the status bar on the bottom. the same version of tomtom on my i-mate 9502 works fine. any ideas? thanks.
Make room for a small one
Ironic as it sounds but go into your settings and change the keyboard to smal... its the same on the HD from what I can remember.. If it dont wok dont flame me as I dont own either device but did this on my mates HD and it worked ;-)
didn't work for me.
You need wvga version instead of qvga
I have tomtom 7.916 and the keyboard is perfect. Maybe you have an old tomtom version ?
I have found by using the BSB tweeks mod and enable the TOM TOM Prog to turn to landscape when you turn phone, the keyboard is made much much bigger
thanks for your replies.
small keyboard is the same as large, doesn't matter what i chose.
also, i don't know where i can get the wvga version as the only one i've got is the qvga.
i have tomtom 7.450 which is not newest but it worked fine on my vga screen in i-mate 9502.
I have a cab for 7.9 but it won't acknowledge my perfectly legal map.
esiu said:
thanks for your replies.
small keyboard is the same as large, doesn't matter what i chose.
also, i don't know where i can get the wvga version as the only one i've got is the qvga.
i have tomtom 7.450 which is not newest but it worked fine on my vga screen in i-mate 9502.
Click to expand...
Click to collapse
Look here for tomtom vga and qvga versions:
http://forum.xda-developers.com/showpost.php?p=4949921&postcount=13
there are also some bluetooth problems with tomtom.
read here for a fix to get bluetooth working again
http://forum.xda-developers.com/showpost.php?p=5021854&postcount=50
Cybertom said:
You need wvga version instead of qvga
Click to expand...
Click to collapse
Hi
Use the VGA version it works perfect size KB.
Good luck
Cybertom said:
Look here for tomtom vga and qvga versions:
http://forum.xda-developers.com/showpost.php?p=4949921&postcount=13
there are also some bluetooth problems with tomtom.
read here for a fix to get bluetooth working again
http://forum.xda-developers.com/showpost.php?p=5021854&postcount=50
Click to expand...
Click to collapse
thanks for this but this tomtom doesn't work with my map... any suggestions? thanks.
esiu said:
thanks for this but this tomtom doesn't work with my map... any suggestions? thanks.
Click to expand...
Click to collapse
We're not allowed to post links to warez sites, but if you were to look at the usual suspect ppc web sites I'm sure there are ways to activate your maps
As far as I know TomTom don't officially support the HD2 yet, but there are ways around this. If you have a legit map and legit TomTom software I personally don't have any issues with you using an alternative source for your downloads.
wizzzard said:
We're not allowed to post links to warez sites, but if you were to look at the usual suspect ppc web sites I'm sure there are ways to activate your maps
As far as I know TomTom don't officially support the HD2 yet, but there are ways around this. If you have a legit map and legit TomTom software I personally don't have any issues with you using an alternative source for your downloads.
Click to expand...
Click to collapse
thanks very much, sorted myself out
Hey everyone...
I've been looking everywhere for a navipanel cab for our phone. I had one for the fuze (touch pro) but as the Touch pro 2 is a wvga I dont think it will work.
I know there are some roms out here with it kicking around but I cant find any actual install cabs. If someone has it would they mind sharing it with the community?
Thanks!
201 views and NO one has a cab...... lovely! This at least says people want it and are interested if there was one. Someone out there must have it.
Just for the record The attached picture is what I am talking about.
Aaron McCarthy said:
201 views and NO one has a cab...... lovely! This at least says people want it and are interested if there was one. Someone out there must have it.
Click to expand...
Click to collapse
PM Ark666. He seems to be the only one who had it working on TP2
I have a package I got from ark666, but have yet to get it cabbed up as Im not the strongest in that dept. It may work cabbed up, but may need to be cooked in.
I´ve cabbed it up, and i had no success, it seems it has to be cooked in.
Cheers.
well.... crap!
Aaron McCarthy said:
well.... crap!
Click to expand...
Click to collapse
If it's any consolation, he said in his thread that he will cook it into a rom for us.
Here you go...just uploaded it...its a different Navipanel then the one in your picture but same basic functions
http://www.megaupload.com/?d=WPPICF0D
if you can reskin it be my guest
nemo0405 said:
Here you go...just uploaded it...its a different Navipanel then the one in your picture but same basic functions
http://www.megaupload.com/?d=WPPICF0D
if you can reskin it be my guest
Click to expand...
Click to collapse
Odds are this is the vga version from the fuze/touch pro... correct?
ark666 said:
I´ve cabbed it up, and i had no success, it seems it has to be cooked in.
Cheers.
Click to expand...
Click to collapse
Can you post your cab so we can try it on our roms... just for fun. Wouldnt hurt right?
Aaron McCarthy said:
Odds are this is the vga version from the fuze/touch pro... correct?
Click to expand...
Click to collapse
That is the Navi Panel from the HTC Iolite.
dwizzy130
ark666 sent me his cab file.. just waiting for permission to post it if anyone else wants to give it a try. I did have the navipanel files in my phone originally but when I would bring up the program it showed no icons at all. After installing his cab the icons are there however the only icon that I am able to select is the make a call one which brings me into the 3 options dialer, favoirtes and recent calls then sub menus from there.
This was all sort of to be expected but figured I would give it a shot anyway.
Ideally, if we can get this version of the navipanel to work with other GPS units like the one from Iolite (hacked to work on the fuze/touch pro) this this ap would be perfect.
I've attached some screen shots of the program running before the cab install and then after.
is this similar to the xpheria x1 panels app ive seen floating around?
I dont believe so... I think what you are talking about is an entirely different UI. This is just a program that sort of simplies the most common functions of the phone for in the car. Gives you shortcuts right into your GPS program and shortcuts for phone calls.
Here's ark666 cab I was refering to in post #13.
http://www.4shared.com/file/193735396/baa5af9a/ARK_NAVIPANEL.html
Aaron McCarthy said:
Here's ark666 cab I was refering to in post #13.
http://www.4shared.com/file/193735396/baa5af9a/ARK_NAVIPANEL.html
Click to expand...
Click to collapse
Thanks mate. Did you ever get this to open up your nav program? I remember I had to mess with it a bit to get it to open Garmin. Had to trick it into thinking it was Co Pilot.
pablo11 said:
Thanks mate. Did you ever get this to open up your nav program? I remember I had to mess with it a bit to get it to open Garmin. Had to trick it into thinking it was Co Pilot.
Click to expand...
Click to collapse
Nope... can you share your "trick"
Aaron McCarthy said:
Nope... can you share your "trick"
Click to expand...
Click to collapse
Nevermind. I tried it and it doesnt work. The details are over in Ark's thread back when navipanel was in his roms. Shame. I'd love to see this working correctly.