hi ppl
i have a funny symptom here with my mda2.
i have 60mb free storage on my device, 32mb on my "internal" memory card and 70mb on my sd-card.
when i try to install a small application with 236k into the internal memory it says "can't install - no free memory" (=free translation to english from my german rom).
i just can't see why that happens ....
any ideas?
regards ize|man
Go into settings, then system and memory.
Here you should have a slider in middle of screen?
Check that your program and storage memory are balanced appropriately. If not you may need to adjust these
Reply if you need any more details
Rob
Hey all!
I am currently running on 1.50i.96 and am looking at upgrading to 1.60a. I dont seem to need much of on device storage space really, so i guess i'd atleast have the persistent memory benefit from 1.60a (correct me if am wrong here!)
I just unlocked my extended rom. I have a bunch of files sitting in it. The question is, can i back these files up on my computer, and get rid of it to free up space? Would that cause any problems during a hard reset or something?
The next question, how do i install the RAMDisk? Where can i find the installer for the same? Are there any procedures i'd need to follow to set my RAM disk size?
Thanks so very much!
San
i've a question fot you :
Have you read the posts about wm2005 rom in this forum ?
the 1.60 rom have 180 Mb of ram (volatile) and 14.5 Mb of Storage (persistant)
The Extended rom is NOT used by wm2005 , you can totally erase the extended rom and install all you want ....
You can install ramdisk on 1.60 rom but it's non-persistant .
persistant = : if you remove battery , content of persistant memory stay ....
non-persistant = : if you remove battery , content of non-persistant memory don't stay !!
thanks for your inputs TofClock.
I am aware of the fact that the ram disk is not persistent...the word "ram"disk is clear enough!
But i need the ram disk "just in case"...i thought it would make better sense to start using 1.60a only when i'm sure i can get more space in case i need it sometime later...for now 32 megs seems good enough though...
TofClock, by any chance could you mail me the ramdisk cab file ?? Heres my mail address...
[email protected]
Thanks again!
San
hmm...
well 1.60a has:
128MB Program memory
14.5MB Storage memory as system root
16MB ExtendedROM usable as storage
You cannot install RAMDisk on this version of ROM.
Well you can, but it will cause conflicts in the OS.
If you need more storage space, get yourself 1.50i.xx, where xx stands for amount of Program memory.
buzz
Thanks for your reply Buzz!
when I use 1.60a, I'd totally have 16MB+16MB of persistent storage right?
the question is, where do all the common files (DLLs etc.), contacts, messages etc. get installed/saved onto? One of the 16meg partitions right? My main worry is that all these common files, contacts etc. might exceed the 16meg partition that the OS is using...correct or would it??
I'd want persistent storage mainly, and as long as I can install a couple hundred megs of apps onto my storage card, I'm just fine!
thanks again big time
San
Dear All:
I just would like to understand the situation here.
after upgrading from wm5 i found that the storage memory is almost impossible to have any programs installed as it's very small.
here is what i have tried
on upgrading directly from wm5 to wm6 without hardreset:
1- storage memory is 8 MB ( i found out that somehow i have all programs that i used on wm5 and all other stored files still available)
2- contacts are still there
3- some programs are nor running
4- extremly slow
on upgrading directly from wm5 to wm6 with hardreset:
1- storage memory is up to 40 MB as i think clearing and formatting the hive removed all excess and uneeded files
2- much faster than before
anyhow my question remains the same do i need to resize capacity?
when installing programs the storage memory is drained on the device, do i need to resize to make which?
1- storage memory ? Program memory ?
2- if i do make it as storage mem 100 and progr memory 16 will it affect anything?
i just need the most space to install programs on the device as files can be added on memory card no problem.
will i need to downgrade to wm2003SE from wm5 or wm6 then use the tools privided on wiki (which is somehow questionable for me being a complete beginner) then resize the ROM and upgrade to wm6?
thanks guys, and thx helmi for a great ROM
Hard reset your device.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade1_WM2003SE0
hI,
IS THERE A POSSIBLE SOLUTION TO MOVE MBs FROM PROGRAMS TO STORAGE?
what do u mean? do you want to move your installed applications in the phone to memory card? nope! it will corrupt i think, you have to uninstall it then re install it. however, some programs which are related to the system (like helmi dialer) will be automatically installed to phone memory....
and if you mean mem as the old 2003 slider for deviding mem between app and storage then no
that vent away when ms made wm5
maybe progs like DOC or flashdisk can merge extended rom with storage if you need more storage
I mean the possibility, having 60 mb for programs and only 3 mb ffor storage, to move for example 10 mb from the first too the last: the situation will become: programs 50mb storage 13 mb.
from where you get 3 mb of storage and aditional 60 mb for programs, in blueangel we have 60 mb storage and 128 mb ram (so called program memory), or maybe you do not have Blueangel device
Please tell us your device and rom version, and you will get advice
anyway storage is flash and as such have a limited nr of write it can take before it dies
if it was used as application ram it would die very! fast
also why is it ppl want so much application ram?
programs take as much ram as they require the fact that there is plenty left dont make them faster at all
free app ram is just empty doing nothing
also BA has 128 MB ram more than most pocketpc's on the market why you need more ?
the problems is i have installed some applications that must be installed on the device; after these operations i stay with the following indications:
storage 3.68 mb (remaining);
programs 60 mb (remaining).
I'll ry 2 applications i found that could zip and unzip automatically all the files (and applications) resident on the device.
I'LL LET YOU KNOW IF I SOLVED THE PROBLEM
success!!!!
SUCCESS!!!
I HAVE USED : POCKET MECHANIC PRO AND MEMMAID.
tHE RESULT AS FOLLOW:
STORAGE USED DECREASED FROM 98% TO 68% WITHOUT UNISTALLING NOTHINGS.an OTHER USEFULL APPLICATION I FOUND WAS swelldisk.
With this one i succeded to increase as follow:
extended rom from 16 mb to 32 mb;
sd card from 2 gb to 4 gb
Swelldisk isn't the best option AFAIK. Try to find in the forum, that was discussed, and few people lost their data from the SD.
laura_kim said:
SUCCESS!!!
I HAVE USED : POCKET MECHANIC PRO AND MEMMAID.
tHE RESULT AS FOLLOW:
STORAGE USED DECREASED FROM 98% TO 68% WITHOUT UNISTALLING NOTHINGS.an OTHER USEFULL APPLICATION I FOUND WAS swelldisk.
With this one i succeded to increase as follow:
extended rom from 16 mb to 32 mb;
sd card from 2 gb to 4 gb
Click to expand...
Click to collapse
Sounds interesting. Can you explain how you did it.
THEY HAVE MANY TOOLS BUT THE MOST IMPORTANT ONE IS IN POCKET MECHANICH AND IS CALLED "STORAGE"; IN FEW WORDS YOU CAN CHOOSE A FOLDER/APPLICATION ON THE MAIN STORAGE AND DECIDE TO MOVE TO A SD CARD.
any reference to this original forlder (also registry keys) change their behaviour/pointing action to the new "location"
laura_kim said:
SUCCESS!!!
I HAVE USED : POCKET MECHANIC PRO AND MEMMAID.
tHE RESULT AS FOLLOW:
STORAGE USED DECREASED FROM 98% TO 68% WITHOUT UNISTALLING NOTHINGS.an OTHER USEFULL APPLICATION I FOUND WAS swelldisk.
With this one i succeded to increase as follow:
extended rom from 16 mb to 32 mb;
sd card from 2 gb to 4 gb
Click to expand...
Click to collapse
hello
I have the same prob
I have downloaded the progs you used
I don't know how to increase Storaqge mem. like you did...
Please could you tell me the procedures you followed to do that ?
Cheers
"I don't know how to increase Storaqge mem. like you did...", you can't. You can only reduce usage by careful planning...Install programs to storage card, configure IE cache and temp files to storage card..... Swelldisk only work on external storage.
move the cache and all the avaiable dll to storae card: it works
I found a safe way to achieve the above:
1. Create a folder Sotage Card\ Windows
2. Include this folder name in "path"
3. Freely move any DLLs into this folder from \Windows to Storage Card\Windows
I used SKTools for achieving this. I am not sure which DLLs may be required in original \Windows folder during reflashing ROM, though I had absolutely no problem in reflashing with all DLLs moved, but better to move back system related DLLs back to original path before reflashing.
laura_kim said:
move the cache and all the avaiable dll to storae card: it works
Click to expand...
Click to collapse
Cache will be recreated if you move the contents to another location, so you dont achieve any thing, rather waste space on storage card. If you really want to do this, change the registry settings too.
Moving DLLs to another location without declaring location name in "path" is incorrect way.
i tried but i dont know how to Include the folder name in "path"
Nishann said:
i tried but i dont know how to Include the folder name in "path"
Click to expand...
Click to collapse
Use SKTools free demo version
hi everybody,
i only have one question. i wanted to install a new theme but it says that my internal memory is full. how do i know which things i can delete from it? i only have 1mb free but i need 20 to install the the theme.. please help!!
sinnlos said:
hi everybody,
i only have one question. i wanted to install a new theme but it says that my internal memory is full. how do i know which things i can delete from it? i only have 1mb free but i need 20 to install the the theme.. please help!!
Click to expand...
Click to collapse
..do you mean internal storage or main memory????
all your apps are probably installed to main memory... if the theme you wanna use must be in main memory, you should delete alot of apps from your main memory using settings>system>remove programs, and then reinstall them to storage card(or internal storage) that way you have more internal memory...
hope that helps
other wise, you can do a hard reset and put everything back on fresh and start installing to SD or internal storage.. (thats what i would do, just cuz its more fresh)