Related
I got a serious problem with my mda vario here.
sometimes, 7 out of 10 times, when i get a call the screen gets totally corrupted and jumbled like on the picture in the attachment. i can only see black vertical lines on a white screen. in order to make the screen work properly i have to turn the phone off/on (stand-by mode) then.
does anybody know where the problem is?
i have to confess, that the phone slipped out of my hands and fell on the ground 3 times so far.
thanks
well, you say youve dropped it 3 times already? is it possible that something may be loose inside? is there cosmetic damages from dropping?
yes, there are some scratches on it. i don't really think that something is loose or broken, because the screen gets only on icoming calls corrupted.
so i don't think that it is due to a loose contact or something like that...
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
roads said:
I have exactly the same problem. I personally think it is unlikely that dropping the phone has caused it as it corrects when you cycle the power button. Any help on this from other forum member would be much appreciated.
Click to expand...
Click to collapse
Any resoluation this? I have the exact same problem!!
Oh dear ... somethings in the air...
mine's got it also. first time i saw it was a couple of days ago. only happens with the alarm clock in the morning :?
My phone is crap like hell... gotta hard reset and reconfig the damn thing. acting up lately...
(ps... AFAIK i barely dropped the phone... maybe 1 or 2 times. nothing more)
I have the same problem
I have read the service manual of wizard and said:
Unusual Vertical / Horizontal lines or partial display
(1) Check the connection of LCM FPC whether is properly connected. (Is a conector between motherboard and LCD)
(2) Try with another LCM. (LCM=LCD Screen)
(3) Try with another Main Board.
(4) Replace LCM if necessary
(5) Replace Main Board if necessary.
(6) Once the defective part has been identified, verify it again with the defective part whether the
symptom could be duplicated
Any sugestion?
Okay..
so far, i have installed Molski 2.26 rom (30meg free version) and upgrade the radio rom form 2.25 to 2.47.
I have not had another occurance of this so far.
Maybe a fluke.
Screen fixes when pressure applied to bottom of the screen
Guys,
I now have to keep my finger pressed hard against the bottom of the lcd unit to get the screen to display to work properly. it is under warranty with Imate but they want me to send it to Abu Dhabi for repair. I'm in Canada and concerned that I may not get it back.
So has anybody else identified this as being a loose connection rather that a real hard fault. Also has anybody fixed their unit by dismantling and reseating the connections.
Finally has anybody used the Imate repair service and was it timely & reliable?
Any advice would be appreciated.
Mick
This is a real hard fault.. had it with my mini s, took it into the shop, it was away 2 weeks... and in the end they gave me a replacement!!
I agree - took it completely apart and cleaned everything ....
And still have the issue.
Serves me right for buying something in Middlesbrough I suppose
It must be a hard fault with the LCD assembly. Will have to see how Dixons handles an overseas repair.
Take care & thx,
Mick
I had the same problem, in the end i took it into my local t-mob shop to have it repaired, they ended up sending me a new one.
Well, I've exactly the same problem since the past two-three weeks, it also occurs only in the morning. I'm living in the Netherlands and this is happening since it's rather cold over here, especially in the morning (3-4 degree Celcius). Since my bedroom window is open during the night, it gets rather cold in my room.
During the rest of the day it is +8 degree Celcius, and the phone works flawless. Maybe this problem has something to do with the Temperature?
Temperature
Bebob - don't thin so as I have had this problem for a number of months and the temp here in the summer is high (30+ degrees C)
It looks to be a bad connection type issue and may be a bad screen cable. It makes sense though that the issue is at the bottom of the screen cos this is where we press the select buttons all of the time.
Pls keep me posted on how you do. mine is going to a local repair shop (on my dime) tomorrow to see if they can fix it.
If not can any of you guys recomend a new unit that could be considered an upgrade to the KJAM ?
Many thanks
Mick
suggestions needed
friends, i have o2 mini s and got the same problem with screen for the last 3 weeks....
can anyone tell me that will the problem aggravate or else will i be able to use my cell properly for few months...
and also what will be the approx cost of repair..
all suggestions will be warmly appreciated...
It's happened to me as well. I have lived with that for one month now. It is happening, when I touch the cursor keys or when touch the lower part of the display. I tried "shaking/hitting" the xda and it looks better, so I assume it is a faulty connection cable.
I have active Cleartype and no more vertical lines for the past 2 days.
I seems to be a problem when background is white and leters are black.
Regards
similar problem
i dropped the phone (T-Mobile MDA Vario) and now when i turn it on the screen is fine for 5-30 seconds but then it scrambles, but works again if i smack the bottom of the phone on my hand!
t-mobile staff told me there are sensors to identify if it has been dropped. I'm suspicious that it could even be programmed to go "faulty" once it is dropped as the screen is fine for a limited time so it obviously works somewhat. do you know if this is the case? or what's happened? also is it a simple thing i could do myself? i didn't take out insurance so that's why i haven't just claimed off that as i'm really broke
Any help is appreciated
Regards,
Steve
whiteish screen / over temperature
hi,
I have a problem smilar at qtek 9100. I had upgade to my ppc wm5 to wm6 around 3 week ago and overclocked to 221 mhz with batery status today plug-in . 2 days ago Screen became whiteish (almost no contrast or over gamma) and working temperature is around 30c. I tried to re-flash with many kind roms but noting chaged.
Is there anybody has these kind of experice. If I can not solve. I am planing to buy new LCD ( I am not sure new LCD will solve the problem)
Thanks
Same problem here. Dropped it ONE time and the screen went crazy. Sent it to my t-mob shop and they got it repaired. They said in the report that they changed the "flex". Dunno if this helps.
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
aroundlsu said:
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
Click to expand...
Click to collapse
on your touchscreen problem.. i have seen this occur by someone improperly putting on a screen protector or maybe there is some dirt up there.. and if you take it back to the store they may give you a new one or make you call the warranty by mail line and get a replacement that way
..... or your OK button could be stuck down
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
kevino said:
..... or your OK button could be stuck down
Click to expand...
Click to collapse
good point, i had that problem once also, forgot all about it
aroundlsu said:
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
Click to expand...
Click to collapse
Just a note of caution!!! This is related to the screen alignment issue i.e. the touch sensitive area of the screen continuing beneath the bezel and causing unwanted touches whether through dust or the sticky gasket in there.
May not return, or will be cured again by the "business card" fix / or as you did a firm clean to release the screen from touching the bezel.
But, it's a question for you, if you only have 5 days left under warranty. Most people with the SA problem find the first signs appear in the first couple of weeks. I would certainly put it through it's paces, open up a few applications leave wifi on so it heats up, surf web over wifi etc etc as the added bit of heat generated internally was a known factor in exacerbating the problem. If all stays well over next couple of days maybe it'll be OK.
Would be good to get urgent feedback from anyone with a newer Hermes who's had this issue and what happened.
Mike
Argh, it's back. OK, I'm certain it's a touchscreen problem and not a button sticking as holding down OK will not cause the start menu to pop up while an application is up and holding the windows key will not close an app. Also the problem is delayed if I hold the stylus down on the screen. It's just the upper right (portrait mode) of the screen that is getting the errant screen tap (about three or four times a second).
I've ran a business card through the edges and it doesn't help. I'm not going to take this thing apart. I did that several times with the 2125 to fix unresponsive keys and joystick but the problems always reappear. My one year old 2125 is barely functional now. My g/f would rather keep her crap LG flip phone then inhieret the 2125 after watching me battle it. That's pretty sad.
I'm going to try a hard reset (second one in three weeks) and if that doesn't help I'm returning it to Cingular and getting my money back. Then I'll either buy another one or a blackjack. I like the 3g and love this device. It's my third Windows Mobile 5.0 product. I don't like the sub-par build quality on my second HTC product now. I paid $599 plus tax for this phone at a local Cingular store (despite the web store saying $550).
My advice for what it's worth is take it back. This screen business has a habit of coming and going and it's entirely possible you hard reset and everything is fine and two weeks later it's back. Also would be better to return with the issue present (not that they wouldn't believe you -would they?)
On the whole though this problem is much more rare than it was, so if you do get the same device again hopefully you will be luckier. If you get directly from shop though check the firmness of the key board clicking into place that seems to still be fairly common problem.
Not the best start to the new year!!
Mike
Well I got desperate and hard reset... I could barely get past the screen alignment startup so needless to say that didn't fix things. Having gone this far and thoroughly pissed at having to reinstall everything I decided to loosen those screws on the back and run a card around the edges.
So far, it's working! I'm not content settling on this hack though so I'm bringing it back Tuesday and will update on my experience at the retail store (not looking forward to that).
Happy new year and thanks for all the super fast responses guys!
Alignment
I was browsing the www the other day and saw a korean/ japanese site showing the inside of these precious devices, and (as pointed out above) how the seal/ gasket underneath the bezel is the root cause of our anguish.
There were some detailed pics of how you can DIY, and remove the gasket, but it's no where near me basic level of competency.
Why would they design a touch-screen to big for the device I wonder???
there is also the business card trick about sliding it underneath the edges to loosen the gasket... there is a whole thread on this screen alignment issue
what site shows how to fix the gasket?
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
johniz1967 said:
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
Click to expand...
Click to collapse
Look down this page. Keep in mind non of the theoretical solutions is guaranteed/
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Mike
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Good news and you're absolutely right about getting it back within warranty if there's a fault.
Great stuff!
Mike
aroundlsu said:
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Click to expand...
Click to collapse
since your appears to be new from 12/26.. i am curious what firmware is on that phone.. details please
Cingular 8525 touch screen no working
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Hey there, I have had the problem before (about 3.5 weeks ago). I had to send it in for service (since I am not a Cingular customer anymore but use the 8525 with T-mobile).Good luck.
wedgesurfer said:
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Click to expand...
Click to collapse
I've been experiencing the intermittent "No GSM" problem, and I'm pretty sure it's the mainboard (it started after I dropped the phone). Already opened the phone a few times / reflashed Radio etc...
Does somebody know where can I find a board for a HTC TyTN (Hermes 200) on the internet?
Thanks for the help!
i would be interested in this too
Maybe you could consider buying one with a cracked screen or so from eBay, just in case you can't figure out where to get a complete mainboard from...
Buying a broken one
MilchCow said:
Maybe you could consider buying one with a cracked screen or so from eBay, just in case you can't figure out where to get a complete mainboard from...
Click to expand...
Click to collapse
I've considered that, but than I have the risk of having a bad motherboard as well. I'd prefer to get a new one as a replacement part. I did that in the past with the D-PAD controller and had success with it. Can't find a motherboard anywhere thou... Any ideas? Help!!
Motherboard
Hey there.. I too want a new motherboard.. I dropped my 8525 and the speaker, left side of the keypad and SD card slot stopped functioning. I took off the cover and reconnected the speaker..even lifted the MB off..But still with the same problem except that the speaker works and that the Unit gets very hot near the SD slot...I surfed and surfed without any finds of a MB..
So any ways broke out the Wizard for awhile , dug deep down and just bought a Kaiser ( the real one from HTC ).....
So any else have any clue at all on how to get a Hermes MB?...
shmilson said:
I've been experiencing the intermittent "No GSM" problem, and I'm pretty sure it's the mainboard (it started after I dropped the phone). Already opened the phone a few times / reflashed Radio etc...
Does somebody know where can I find a board for a HTC TyTN (Hermes 200) on the internet?
Thanks for the help!
Click to expand...
Click to collapse
i'm iterested too
I am in a different position. I NOW HATE THESE UNITS LIKE POISON
I have three 8225s which I am getting really sick of constantly reflashing and finding out that something doesnt work, whatever it is.
Sometimes it is the whole screen going white eight times our of ten boots, sometimes NO GSM, sometimes it flashes properly and runs properly, starts up with all GSM numbers showing correctly and then goes into its configuration cycle only to end up with NO GSM on reboot or some kind of freeze.
I want to know where I can get rid of these things: I am in New York. Is the only place to try them on ebay? Might involve a considerable (not worthwhile) learning curve?
Has anyone had any luck contacting other flashers on craigslist? Or is there a place on this forum where I can get rid of them for a reasonable price?
I also have a few Wizards (as well as a working Wizard G4 main board) and a Blue Angel which has NEVER worked properly in the 4 years since I Have had it. However with persistence and playing around while doing other things (like watching TV), I DO have it finally working properly on all functions and have given it to my offspring. The sheer amount of playing around with it to get it working properly has convinced me that it definitely wont be worthwhile trying to get the Hermes' to work!
Oh and I forgot to mention.....
licensedtoquill said:
I have three 8225s which I am getting really sick of constantly reflashing and finding out that something doesnt work, whatever it is.
Sometimes it is the whole screen going white eight times our of ten boots, sometimes NO GSM, sometimes it flashes properly and runs properly, starts up with all GSM numbers showing correctly and then goes into its configuration cycle only to end up with NO GSM on reboot or some kind of freeze.
I want to know where I can get rid of these things: I am in New York. Is the only place to try them on ebay? Might involve a considerable (not worthwhile) learning curve?
Has anyone had any luck contacting other flashers on craigslist? Or is there a place on this forum where I can get rid of them for a reasonable price?
I also have a few Wizards (as well as a working Wizard G4 main board) and a Blue Angel which has NEVER worked properly in the 4 years since I Have had it. However with persistence and playing around while doing other things (like watching TV), I DO have it finally working properly on all functions and have given it to my offspring. The sheer amount of playing around with it to get it working properly has convinced me that it definitely wont be worthwhile trying to get the Hermes' to work!
In addition to all this, I use most regulatly a Wing. A few years ago I broke the screen and HTC sent me a new chassis for whatever reason. When I switched screens, the unit with the slightly broken screeen worked, it just had a chip like break at the top corner. I could still use it. Recently I put the battery back in and hey presto! it now doesnt work at all
So what happened to the working one? The battery pins on it stopped 'pinging' today, which I take to mean that the connections no longer work. The unit suddenly stopped working on putting the battery back in it.
So who needs a few Wing chassis as well??
Click to expand...
Click to collapse
Heading should be whole load of units, mostly working, to get shot of.
After 4 months of flawless work, the lower part of the screen (a strip several millimeters from the edge) suddenly stopped responding properly!
E.g., all buttons in this area (including launcher/phone/+ on home screen) either don't work at all, or sometimes activate after a while when strongly pressed with the thumb (orientation doesn't matter).
Just two hours before they responded fine to the index finger.
Also, I've noticed that when I "multi-touch" the lower line in a file browser with two fingers, it works nice! Buttons are too small for that, however
I first tried to restore backup, but it didn't help, of course.
Has anybody had the same problem?? I guess it's a warranty case ...
I would agree, it's probably a hardware problem that you'll have to bring your phone in for service to get fixed.
I'm having that same problem my self, but just now and then. What helped with me is that I press the upper left corner of the phone with my other hand and then the lower part works fine, so i think i should get a new digitizer or its just loose connector.
im having the same problem , i have put up with it for the past few weeks and its driving me nuts now. today i did a factory reset which made no difference , i called htc who didnt sound a bit suprised by my phone call it gets picked up tomorrow morning to go for repair so the question is ... is this a common fault? and how the hell am i gonna cope without my hero in my pocket ?
Yeah happened to mine last week, a few have had the same issue where it's just the launcher bit not responding. Although the good news is that I'm getting it back tomorrow though so it's good times!
I had the same problem with my touchscreen (after a month or so!)
Mine got picked up thursday by HTC and I just checked the tracking site and they just recieved it.
I wonder how long it's going to take
Visited their service center last week.
They've immediately replaced my screen with a new one without any ado. Now everything works as before!
BUT a friend of mine who bought his Hero in January is having similar problems now...
It is a common problem according to HTC.
Mine was repaired in just 10 days.
Same problem here, did htc said anything about this problem? is it a common fault?
thank you
I said it in the post above yours.
ah yes, right, thank you
mach2005 said:
It is a common problem according to HTC.
Click to expand...
Click to collapse
If they acknowledge it officially, couldn't you provide a link please?
i gave mine last week to repair, they returned to me unfixed. on the paper stated that they only updated the software, what a dumb this htc guys. need to go back and tell them again the same story. im wasting my time only for this. wtf
I recently had this problem. The 3 buttons at the bottom of the screen wouldn't respond, took it into T-Mobile who said I'd have it back within about 7 to 10 days... 3 weeks later I got a text saying I could collect my phone...
On the paper sheet it says they've replaced the lens.. Which I can see they have as before I had a miniscule hairline scratch near the top.
They also mention a software update (1.0.0.A6288)
Either way it works nicely now.
I've recently experienced the same issue - the lower part of the screen, the one where the LauncherPro icons usually are stopped responding to touch. If I press really hard it works sometimes, but it's pretty annoying. I didn't sit on the phone or drop it recently, it just stopped working all of a sudden.
Is there anything I can do, as the phone is out of warranty ?
HTC South Africa gave me a new hero after I took mine in for the 3rd time. Hardware problem. Very happy with their service.
i have this exact same problem, is the only solution to send to htc? >_> Cuz my warranty's out already unfortunately... i flashed my hero to CyanogenMod 7 and it seems to have helped, but still not completely responsive... I also have a problem where at times i completely lose control of my touch screen where the spots i touch seem to respond to opposite sides of the screen... anyone else?
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
^ wtf do u mean?... are u just being a gimp...
VillainRocks said:
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
Click to expand...
Click to collapse
i am having the same problem and i badly need to solve it please could u tell me that what do you exactly mean by put a dryer on the htc logo
thanks
The top part of my phone does not respond to touch anymore... it is impossible to bring down the notification bar... and once in a while the whole screen goes unresponsive.. tried factory reset but still the same problem..
am having the same problem since 2 days back
after reading some of the posts i found that the Digitizer For HTC G6 Legend A6363 should be replaced with new one i ordered mine from ebay
ebay.com/sch/i.html?_from=R40&_trksid=p5039.m570.l1313&_nkw=Digitizer+For+HTC+G6+Legend+A6363&_sacat=See-All-Categories
waiting for the item to be delivered
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
nnssxx said:
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
Click to expand...
Click to collapse
Do you have widgetlocker, by any chance ?
Or a lockscreen replacement which disable the notification bar during the "slide to unlock" state ?
I didn't know there was such thing as widgetlocker. I use CM7 latest nightly, never seen that thing.
I also facing this problem from last 2 weeks and i also think this is digitizer problem. If anyone else found the solution else changing the digitizer, then please post.
This is beautiful phone but htc added a poor quality things in it, due to which many users facing such problems.
Nah.. I dont think its because of widget locker.. its the digitizer..
well that's a shame, gotta buy a new digitizer on ebay after just over 1 year of use...
I know.. this sucks... Im planning to upgrade though.. Any of u guys have any suggestion?
Depends on your carrier if you want suggestions for an upgrade.
...but that would drive the post off-topic.
Sent from my HTC Legend using XDA App
I have the same problem. my screen doesnt work anymore because some water got in from the grill above the screen :S
should I try to take apart and dry off or shall I buy a new digitizer directly?
I think it may be a good idea to try disconnecting your digitizer and reconnect it as it just might be helping. I did it on my girlfriends legend and it has been working perfectly ever since. Maybe a good idea to at least try that before buying a new one. So i guess it could be in the connector to? At least this worked for me.
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Earayil said:
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Click to expand...
Click to collapse
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
My problem got worse and the phone became totally unresponsive, changed it, got a new phone.
Tanayar said:
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
Click to expand...
Click to collapse
exact same problem here, mine works when it feels like working, totally random, I simply can't understand why, I doubt it's the temperature... I think its in the device theres something wrong, I smack it numerous time and it works right after a big smack on the screen, or rub your whole hands on the screen, also, the angle you are holding the phone affects this problem, if none of these work, a phone restart always makes it work at the beginning. Oh boy did my phone took and taking much beating... oh well, I wish I could permanatly fixed the problem here, as I was thinking of handing the phone to my brother when I upgrade, I'm using CM 6.1.
I still recommend the same thing that i posted earlier here, her screen still works perfect.
I had the same problem few months ago. The problem is with the touch digitizer. I bought a digitizer on ebay and replaced it myself. After that my phone has been working fine. Its not that hard to replace it if you have a small knowledge about hardware.
I use to get that unresponsive screen issue only in the summertime, plus it gets worse if I add humidity (read: sweat). I just need to give it some time then to dry off/ cool down outside my pocket, and it's all fine again.