Related
Hi
I wondered if anyone had successfully used the Sim Access Profile capabilkity of the of TyTn to connect with a Bluetooth car kit. I'm trying to get the connection going with a Merc. car kit, but I can't get them to pair.
Thx
Hi petes, I have an slk 55 amg with command and bluetooth. The bluetooth in the command system does not work for pairing with a phone. Even though it says it has bluetooth. To use bluetooth you need an extra module.
Hope this helps...
http://www.benzworld.org/forums/r17...y-arrived-but.html?highlight=bluetooth+module
http://www.wireless4mb.com/phones.html
http://www.benzworld.org/forums/r17...pic-seems-kit.html?highlight=bluetooth+module
Hi Dale
Thanks. I actually already have the module - the european version of the module is different to the US one in that it uses Sim Access Profile, rather than just acting as a headset. The TyTn says is supports SAP, but I just can't make it work - wondering if anyone's actually got SAP working.
pete S
Hi Petes,
I also have an Mercedes-Benz with the european bluetooth module. But I have a Qtek 9100 updated to AKU2 (Which is supposed to support SAP), but no luck at all. Actually the module can not even identify my phone and display it at the search screen of the comand screen. I tried also with a NOKIA 6230i (SAP Compatible phone) which actually I was able to see at the search list of the comand screen which means that the module is working with SAP compatible phones. What I will do next, is to try again with the new firmware I installed to my 9100 (T-Mobiles 2.21 Version) which has a SAP application for bluetooth (Something like SAP Server).
I can not do it yet because I am abroad and I will be back again 1st of September. I will let you know the results ASAP.
If you have any news from your site with TyTn please let me know because I was intending to change my 9100 to TyTn just for the SAP functionality.
Hi Barsam
The reason you can't find the 9100 when you search with the BT module is that it only looks for devices which identify themselves as Phones. The TyTn (and no doubt the 9100) identify themselves as Pocket PCs and so the (stupid!) Mercedes kit ignores them. The good news is that you can hack the registry to tell the Bluetooth stack that it's a phone. The bad news is that you can't pair with it. Getting it into the search screen doesn't mean it supports SAP - I could see my old T68 just when I was testing. Could you actually pair with the 6230i - i.e. when you see it in the list select Call?
When you're back, PM me and I'll send you the hack.
To tell you the truth I didn't try to pair the 6230i, but it's one of the phones that mercedes have tested on the bluetooth module. If I don't manage to do it with the 9100 I may get a 6230i. At least I can use the one that my brother has to test it and even copy my contacts to comand. Have you tried the hack with the TyTn? Can you tell me what is the the registry set to do that?
Where did you find out that the bluetooth module ignores enything elese than phones?
Make the following registry change
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS]
"COD"=dword:52020C
On your own head etc.. Keep a copy of the current value of course. Then do a soft reset. You'll then see it as a phone. I've tried this, and can now see the phone, but can't pair. I've had a mail back from HTC that they're aware of some problem with the SAP and are working on it.
I wish a nice car kit would be released in the USA that supports SAP/850 & 1900/ external aerial...
hello,
i'm trying to get my TyTN working with my Meceder Command too... does anyone tried the English ROM-Update? Someone wrote that he can use it's TyTN with his Audi after updating the ROM. And tha Audi-MMI-System works also with SAP... perhpas after the ROM-Update it works with Mecedes Command System too...
I haven't tried it yet - I've been waiting for the TyTn update to come along, but nothing from HTC yet. If I don't get anything soon, I'll switch over to the iMate ROM and report back.
I have used a nokia 6233 6280 onmy E55 2005 with B/t Module
The mercedes module in conjuntion with the command system is problimatic, hoever I think I have another peice of the puzzle. With both the above phones they only worked using Vodaphone 3g cards Three 3g cards paired using SAP however could not get recieption....Mercedes say (there guessing) its the way the sim card is configured.....
Mercedes BT
I have a TYTN on order and Im desperate to find a solution to the issue before it arrives.....
As a follow on to my last post ...basically what I THINK found out was if the sim card was configured to work only on a 3G phone..(some networks do this so that they cannot be put in a 2.5g phone and constantly roam on).....then it would pair with the Bluetooth module in Mercedes however never get recieption.
I tried this on several phones including 6233 6280 N80 E61.....just to name a few....ALL PAIRED....however If I put a Vodaofone 3g Card in then IT worked .....IF i put a Three 3G card in it didnt.....BUMMER CAUSE I'm with THREE.....
I hope this helps in some way and Im more than happy to be corrected however these are my first hand expeirnces....I WANT TO USED THE TYTN in my MErc so Im keen to help in amy way....I have unlimited access to phones...so if anyone has any other suggestions Im happy to give it a go....
Mark
At the moment, you'll find that by default the merc kit won't even see the Tytn (it's a pocket pc, not a phone as far as Bluetooth is concerned). You can hack the registry to change this, but then the phone will be seen, but pairing will fail. Hopefully, the forthcoming firmware update will fix this - I've had mail back from HTC support to suggest they know there are problems with the SAP support.
Mercedes BT
Is there anyone who had paired Nokia phones with Mercedes BT(euro spec) successfully? I had tried for several Nokia phones (6230i/6270/6280) to pair with BT ,all failed. I can just find the 16-digit PIN on Comand, no phone appears on Comand. Phone & Comand can't find each other. Do I have to set other setting except the "bluetooth setting" for mobile phone? Even I try to "search for audio enhancements" and 'find no devices' at all .
Thanks Petes,
Did they give any idea on time frames?...Did you have any thoughts about my experience with the different sim cards....
Mark
I am considering buying the HTC TyTN and the Merc Bluetooth module so I am very keen to know if anyone can get this working.
Thanks,
Ady
Nope - no news on timescales I'm afraid - just waiting for the firmware update from HTC. I'm reluctant to try the iMate firmware at the moment - until there's an HTC to go back to in case something goes awry. Has anyone had a chance to try SAP with either of the newer firmwares (iMate or Dopod) - might give us a good clue if the HTC one's going to work.
I've connected my 6230i easily enough, just remember to allow "auto connect without confirmation" on the phone after entering the 16 digit code
I have tried my HW6915 pocket pc but like the other PPC's it is not recognised
A reply I got from HTC support on 21/09/2006 asking about the Merc SAP problem was:
At present the TyTN is only compatable with a limited number of kits. A ROM update will be released shortly to update this.
Click to expand...
Click to collapse
So fingers crossed that it will be soon and solve the problem.
I asked them the same thing a while ago and just checked back in on availability. Just got ...
"At present the HTC ROM for the TyTN is being written and tested and we expect it to be released in the very near future."
So, patience is a virtue I hear....
Hello all. This is my first time posting a new thread although I've been lurking around here for a while soaking up all the information from this wonderful site. That said, I have been researching my problem for days now both here and on google and have found no solutions that work. So I'll see if there's anyone here who can help. Here goes....
I have recently flashed DCD's 3.2.6 ROM on my Verizon XV6800 and it works great (love the aGPS too, Thanks GC14) in every area but my car. I have a 2004 Audi A4 with the RNS-E Nav system with integrated bluetooth. Before I flashed to DCD, I had the original stock ROM (2.09.605.8 with Radio 1.30.00) which gave me full functionality with Jetware Mobile (Phonebook and Recent, Received & Missed Calls all transferred). Now, with DCD, it'll only connect to the car and won't transfer anything. If I try to load Jetware, it'll just lock up my phone while I'm connected to the car. Thanks in advance for any help you can provide.
No one else has this problem or a fix for it?
TGabriele said:
No one else has this problem or a fix for it?
Click to expand...
Click to collapse
I wish I was rich enough to afford such a car, then I could maybe help you out. LOL
But I would gladly accept such a car as payment for figuring out your problem.
Nevermind that the car is an Audi. Does anyone else have this problem with a factory BT system that transfers the phonebook to their car.
I had this same issue on my X3 and it seemed to be the way the PPC wanted to transfer the phonebook was by using some file transfer protocol the car did not understand. I could sync it and make and receive calls but no phonebook. Took it to the sprint store and we tried a blackberry and a standard moto handset. The blackberry did not sync the phonebook either but the standard moto phone did. I don’t think it’s possible based on the profiles in the car so I gave up on the phonebook. Try changing the bluetooth stack in the rom, you will have have to make your own rom and beware of the stack you use to make sure it is one for your phone.
I flashed DCD's rom using the kitchen, so making a custom rom from there is no problem to me. What I'm not sure of is how to change the bluetooth stack. I thought it is part of the hard coding for the OS? If you or someone else reading this thread has any information on this or can point me to some info on this it would be greatly appreciated.
I have the 6800 with DCD 3.2.6, and an Audi, with full phonebook transfer so I'll try to help you out:
1. Which 6800 radio are you using? I have found 3.42.50 to be the best as far as Audi bluetooth compatibility is concerned.
2. Jetware will not work with WM 6.1 on the 6800, but you don't need it, since 6.1 included phonebook transfer enhancements.
3. What version of Audi software are you at? There have been several releases since your year. You should be able to get more info from www.navplus.us and of course from your stealer.
4. You do have your bluetooth settings set for "discoverable", right? And, (I don't know why this is the case) it seems when OBEX is on, the phonebook and other items transfer quicker.
If you have the 6800 radio and Audi software updated, you should have no problem. Jetware is no longer necessary.
1. I am using radio ROM 3.42.50
2. The reason I loaded Jetware is to have it sort my contacts by Last,
First. Is there another way to do this?
3. I am running sw0200 on my RNS-E, but was considering moving up to
sw0260.
4. I haven't tried this, but I will.
Lately I've also had the issue where if the phone is connected to the car for a while, the bluetooth on the phone will shut itself off and not turn back on until I do it manually. I'm beginning to wonder if I should just hard reset and start from scratch. Any ideas? Thanks in advance.
I'm sure there's a reg tweak for listing First name first in contacts. Hunt around here or at ppcgeeks. If you want to stay on 6.1 jetware will not work (unless they release a new version).
Definitely update the Audi software to the newest version.
DCD has done nicely fixing power settings in the last few ROMS to solve the bluetooth shutting off issue, although when memory gets very low, it may still happen. You must have some other program or process running that sucks up memory if you are still experiencing this.
It never hurts to hard reset, as long as you have the time.
So, I've updated to SW0260 and done a hard reset and I'm still experiencing problems. Do you have any more suggestions? Thanks in advance.
TGabriele said:
So, I've updated to SW0260 and done a hard reset and I'm still experiencing problems. Do you have any more suggestions? Thanks in advance.
Click to expand...
Click to collapse
I'm running an after market HU (Pioneer AVH-P4000DVD) and DCD's latest ROM, and Jetware works fine on mine. Just re-transfered my phone book earlier today....
Apologies if this has been asked before, i've tried searching and now found a question that matches this, similar but not exact.
I have a Touch and now a Touch HD.
My Touch would connect to the cars bluetooth (Renault Laguna) and happily send over my phonebook so I could browse through it using the controls in the car.
My Touch HD connects ok, but doesn't send the phonebook (contact list always reports as empty). I've checked the Remote SIM Access box in case that makes a difference and ensured i'd copied over my contacts to the SIM first. I've even unpaired and repaired the phone, still 'empty'
I've tried using Jetware to get around this, which provides me with a "Windows encountered a problem with services.exe" which isn't very inspiring - but ultimately surely I shouldn't need to use a piece of software to 'add' a feature that existed on my older phone? Needless to say after all of this is done
Am I missing something? Any help anyone can provide me with would be appreciated.
My ROM version reports itself as 1.56.405.1 (43972) WWE, Protocol is 52.62.25.34U and radio is 1.13.25.24 if that offers any help?
Thanx in advance
I have to use Jetware BT to connect to my Alpine unit from http://www.jetwaremobile.com/
Does mean I can select the type of contacts i want to sync as well
Sorry, maybe I didn't make it clear.
Jetwaremobile doesn't appear to work properly on my Touch HD - it causes Windows Mobiles to report services.exe as needing to be closed. Performing a Soft-Reset makes no difference either.
I've emailed HTC about it but i'm not holding my breath on a response, its seems ridiculous that it did work on the old phone and now doesn't work on the newer model
The annoying thing is that I really really like the phone, but the inability to work with my cars built in BT 'headset' is something that makes me consider sending it back.
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse
So any ideas? Now we are already two you can make happy! Thanks
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...
Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks
2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to
I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?
Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.
OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html
a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob
I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported
its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.
anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Hi,
I have the same problem with my Touch Pro and my Megane 3.
I have to switch back to an older version of the rom then..
Hi,
I'm using Energy ROM Titanium 18may.
Radio 1.17.xxxx
No problem here with BT of my car stereo.
I had this problem untill I delete the old pairing on the car BT.
After this, the phone pair great
firespawn said:
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Click to expand...
Click to collapse
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
+ 1 here
Don-Maco said:
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
Click to expand...
Click to collapse
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
It is not about Task 29.
I had problems with access through the original multi-functional touch panel in the Ford Mondeo. When I went to CLEAN ROM, all troubles are gone. The problem is that you must agree with access on the phone. This question is not on Energy ROMs displayed. I can pair phone but can not be used for handsfree calling.
Now I have a CLEAN ROM and everything is bugfree.
To be honest, no ROM to date consistently works with the in-car bluetooth kit in our Zafira. It works flawlessly with my old phone (K800i) and my wife's phone (W950i) but it's just not stable for the HD.
If it works, it'll drop the bluetooth connection after about 15mins. It's as if there is a time-out, but I've hunted the registry and both HD Tweak and Adv. Config for anything related to this but with no joy.
My current ROM seems to be about the best so far (kwbr's WM6.5 and Manila 2.1) but it still drops the connection randomly yet other times it may keep the connection for over an hour no problems.
Seems very very strange to me, but from what I've read, it's a common issue with the bluetooth kits in GM's euro cars (Vauxhall, Saab, Chevrolet etc.)
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
@raistlin74 / @Don-Maco
tried all ways possible
car to phone
htc comm mgr to car
windows BT settings to car
@superseagull
having the latest carrier rom flashed before (comes with SPL 1.54 to enable flashing of 6.5+ roms)
what kind of rilphone / radio rom do you use? [EDIT: saw it in your signature ]
@malson
well, sounds logic ... the pairing won't succeed cause the phone's dialog to allow access doesn't appear. will try it with energy's titanium rom. never the less, the outdated MIRI roms /w sense 2.5 and windows mobile 6.5 works for me
@jonifen
as mentioned, the phone is compatible with my car - in basic. simply doesn't work with energy roms.
therefore I tried it with various other systems to exclude a mismatch with my car kit
well, thanks for you participation so far - may we get the clue with my problem
regards - FS
2 options?
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
firespawn said:
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
Click to expand...
Click to collapse
Radio: 1.14.25.35 with the matching rilphone
Rom: Energy.RAPHAEL.23569.Sense2.5.GTX.Themed.May.13
i don't think it's a radio problem since i used that one with older energy roms, and had no problems with my car kit.
no problems here
I tried my phone with a bluetooth carkit in a BMW X5 and found no problems with it. I use latest NRG rom 21905 with CHT and latest Radio (1.17) with Rilphone 1.15. i suggest u upgrade to those as well.
GL
As this is about a genaral pairing problem I don't know if it will help u as u seem to be able to pair but just have Handsfree problems...
But as u didn't mention how u tested out the fixes I will post this here.
Remember i had a problem once when trying to pair my HD.
Base:
- Touch HD with some newer Sense 2.5
- A2DP wasn't working or Windows Mediaplayer hooked A2DP keys
AFTER I tried to fix A2DP problem (installed some "fix" cabs u mentioned above) I wasn't able to pair anymore.
Here is what i figured out:
- To get it working again it didn't help to over-install another fix - don't know why but seems that some fixes do reg changes wich break other ones.
- I had to hard reset the device
- so never try to install 1 fix after another to figure it out
- always do 1 hardreset + 1 fix then hardreset again
- only really good working fix for me was HeadsetFix.cab I posted in NRG thread - many other fixes broke my pairing capability
Now im on:
- actual NRG 2. June MaxSense 23xxx
- HeadsetFix.cab installed (otherwise Windows Mediaplayer pops up or it doesn't work for me)
- haven't had problem with pairing since several month with any NRG Rom (before it wasn't depending on NRG but on Sense 2.5 / but just had A2DP issue - pairing issue just with wrong fixes installed)
Radios I tested were .12 and .14
Tested BT Headsets/Caraudios:
- Motorola HT820
- some Sony MEX BT xxxx Caraudio
BTW for all who are interested in - i always install "AutoA2DP" or "AutoActiveSync" cause A2DP doesn't pair automaticaly in my car - just the Handsfree pairs by default.
Mimic NRG style ROM Thread !!!!!!!!!!!!
eddyve said:
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
Click to expand...
Click to collapse
Yes + 1
Why only YES and YES option ...
No problems with any BT. Myy HD conects on any BT device that i have with no problems...
*****************************************************
PS: its not nice to use for your thread title the same format and characters that NRG use for all of his roms !!!!!!!!!!!!
Its a bit confusing for regular users and misleading....
And if i was you i will change the title not to mimic NRG ROM threads !!!!!!!!!!!!!!!!!!!!!!!!!!!!
colossus
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
mimic NRG ROM thread
firespawn said:
@colossus_r do you have anything useful to contribute? stay on topic please!
Click to expand...
Click to collapse
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Issues with bluetooth ...
aleskow said:
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Click to expand...
Click to collapse
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
superseagull said:
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
Click to expand...
Click to collapse
Right is right i also never had bugs since energy roms march 2010
and the opera 10 never gave issues! so some flashers are doing somthing wrong! when using titanium the rom is superbly fast i also spice things up with the htc-performance.cab.
firespawn said:
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
Click to expand...
Click to collapse
We cant do any research if we dont have the problem
i think you should swich the the car bluetooth on and keep it pressed till the device finds it! thats what i did on other cars
or you will have to reset the cars bluetooth as shown in the manual
firespawn said:
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
Click to expand...
Click to collapse
set up you bT via comm.manager. dont turn Bt on just choose set up bluetooth hdset device etc/ turn you cars bt on an make shure it is visible etc by keeping the on button pressed in while searching with your gsm and thats it i think thats how it worked 4 me and will work 4 every one too!!!
study your old rom be4 you use a new one and you will know how to recognize the differenzesss amen
I've experienced something similar with my volvo. In my case it paired sometimes and usually in a call it disconnected. This happened with all kind of roms. It all disappeared after a radio update.
Somebody mentioned 1.17... with rillphone 1.15... works like a charm!
Hope it helps
(else you can try to let a mechanic update the bluetooth software in your car)