Hi all
have anybody a idea, to solve a broken USB Plug on Universal, for DIY
a explanation a how to to change or solder a new one on the Board ??
thanks for Info
Andreas
hi men... you can solder this mini USB BUT on this board must exist tin connection...
i did to therse two days ago and mi MDA is ready...
but you can´t use a normal inducated melting-iron... you must have a pointed melting-iron...
Jarda
Related
Hi
I'm looking for USB in extension port or somewhere else on the mainboard becouse it's been dameged under the sync/charge port and I need to rewire USB from somewhere else. Also does anybody know why joystick don't work ? mechanicly it's perfect so I have no idea.
Anyone? Please help...
Hallo, I have the same Problem. I have only few soldering pads of connector after the connector is cracked out. But if you kann see, evtl. under microscope, there are little holes, which connects to the pads, if the pads are OK. I measured some pads and found the following points . See pictures..
I has not tested the functionality yet! because i have no connector yet -->Caution! If you or somebody could still check the Pins again, would be great! Because I have no second Board and I cannot be sure with 100%.
Hi guys, my 1st post here ,: here goes :, can anyone help me out on the pinouts for the imate jam / xda min . what i want to do if its possible is to sync via a serial cable from my laptop ( does not have usb on it ) to my imate, i know the 5v charging wont be ther but just want it for syncing , hope that make sense
cheers
webtronix said:
Hi guys, my 1st post here ,: here goes :, can anyone help me out on the pinouts for the imate jam / xda min . what i want to do if its possible is to sync via a serial cable from my laptop ( does not have usb on it ) to my imate, i know the 5v charging wont be ther but just want it for syncing , hope that make sense
cheers
Click to expand...
Click to collapse
The connector is a standard mini-usb port:
it has only four pins +V USB+ USB- GND.
It does not carry serial port signals.
Could you use wireless instead?
V
yup, you can sync via wireless or over bluetooth....
Bluetooth might be a problem if he's got no usb. But he might be able to get a usb pcmciacard or bluetooth or wireless card.
V
You could add USB ports to your laptop pretty cheaply.
eg http://www.dabs.com/productview.aspx?Quicklinx=3V5S is £14 and has firewire too. (by the looks of it, the description is somewhat lacking!)
Jamie
hi
i damaged my mini usb connector on the trinity
any one knows the part # or where i can find a mini usb port for the trin or any way of fixing it
thanks
it seemed that u can get it on cnnshop.
Hello to everyone!
I have problem about my Tytn (Hermes 200) that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it -for example to change that connector with a new one (because I have another Tytn with usb port broken but that connector is ok)? Does anyone know how to do so? I really need help...
thanks in advance
or if someone know where I can find a new motherboard cheap?
replacement parts
Ana* said:
Hello to everyone!
I have problem about my Tytn (Hermes 200) that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it -for example to change that connector with a new one (because I have another Tytn with usb port broken but that connector is ok)? Does anyone know how to do so? I really need help...
thanks in advance
or if someone know where I can find a new motherboard cheap?
Click to expand...
Click to collapse
Ana, after 3 seconds on Google I hope this helps, but cheap??:
http://www.cellphone-repair-shop.com/search.php?pg=1&stext=motherboard&sman=7&scat=10&stype=
Eba y my be your last effort, but be careful!!!
Peace!!
thanks, I checked their site, but they don't have actually motherboards for sale that are in stock.
so, I am really interested in changing the connectors, just I don't know how do so?
....
Probably the easyer would be to change a USB port than this connector
But in all cases you need HA (Hot-Air)
well, do you have some suggestions how to change a USB port?
HTC 8525 parts
I have been able to get parts ie: motherboards/flex cables from Ebay from phones that have broken screens. There is a possibility you may find the flex cable and motherboard there too. Hope this helps
Ana* said:
well, do you have some suggestions how to change a USB port?
Click to expand...
Click to collapse
In taht case there are not another option than go to service...
If you don`t have an Iron or HA (HotAir) you can`t do it.
CzarnyRafal said:
If you don`t have an Iron or HA (HotAir) you can`t do it.
Click to expand...
Click to collapse
suppose I have it
does anyone know how to change it? I need some instructions please
I have Hima with broken connector. Now i want replace them with usb mini connector.
Pinout is on http://forum.xda-developers.com/wiki/index.php?title=Connectors
I want to join pins 13*14*15 and 16-17-18GND with USB 1-3-2-4pins
But I still have one question... May I also connect three pins 20,21,22 to pin 13(+5v) if I want to recharge batteries directly from usb?
No need to connect all that pins: http://forum.xda-developers.com/showpost.php?p=10453499&postcount=71 and: http://forum.xda-developers.com/showpost.php?p=10467485&postcount=73
Thank you very much. I was looking for it here,but my English is´nt good.