is it possible to install a new rom without a computer? I have a few roms on my storage card from a wifi connection and wanna try them out.....any suggestions? it is a tmobile wing thanks
sorry for the stupidity, ive tried a search with no luck
if you are hard spl then you can flash from the storage card but you need a computer to flash to hard spl
umm..yea you do i flashed my wing a few times and believe you need a computer, its a lot safer then attempting to do something that you havent found yet...
just wondering, why cant you use a computer again?
my computer has windows vista on it and i cannot get actisync to work with my computer, so i was hoping that i could just do it on the phone.
remi_357 said:
my computer has windows vista on it and i cannot get actisync to work with my computer, so i was hoping that i could just do it on the phone.
Click to expand...
Click to collapse
lol u have vista
but anyways u have to go through Mobile device center its the same thing as active sync because they wanted to say that they did smething different but anyways get mobile device center and you will be able to sync
If you your phone is hardSPL and you have a SD card that is big enough for a rom, then you can always flash from the SD, just rename you rom into HERIMG.nbh, place it into the root of the SD card, soft reset your phone and then enter the bootloader. For more detail on SD flashing, search the forum.
could you please tell me what hardspl is?
remi_357 said:
could you please tell me what hardspl is?
Click to expand...
Click to collapse
It's the spl that allow you to flash any cooked rom. But I won't say more because you need to read by yourself if you don't want to brick your phone. It can't be explained in a few line. Search for hardspl please.
Related
Since updating to the T-Mobile Rom for my XDA, nearly everythiung has gone wrong.
And when I tried to downgrade it.... Nothing happens.
I used to use a modified Program A to upload it to my phone but it continues to say that the USB devide gets remotely stopped. the only thing that I can think is that my phone is cancelling the upgrade/downgrade.
I have also tried using a copy of the XDATools program to try and:
Upload another Rom.
Copy the rom to an SD card so I can use the bootloader method.
Change the Bootloader so I can use the SD card method.
None of there are working.
Help :-(
I really want to go back to the ATT rom, it might have the annoying thing with the sound but at least it doesn't mess up as much, doesn't format my SD/MMC cards and lets the alarms actually work for me.
if i'm not wrong, it seems you upgraded using the TMO exe file which updated both ROM & RSU.
check ur boot loader version, if it's 5.22 or higher, i think you need to dowgrade to 5.15 ... use the exe file that comes with the XDAtools in the binaries directory .. its name is fixbootloader.exe .. it should update ur boot loader to 5.15 by which you can use XDAtools or the SD method.
Tried that. I do have XDA tools on my machine and used that program but my CDA still has the bootleader of 5.22
And both of my machines don't like trying to update my XDA :-(
This Rom is the most annoying one I have tried mainly becaise now I can't go back to even my original one that I backed from the XDA when I got it.
Am I stuck with this ROM?
omg, i think i am having the same problem. In my case, since ive installed the new rom, i cannot sync with activesync, well very slow anyway. Activesync on my pc stops responding for a while and suddenly it says connected. However when i then run the executable created by the kitchen, it just flashes a command line window for a second.
When I try XDA-toolz with an nbf file, i get the following message:
ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype
Click to expand...
Click to collapse
Please someone help, because i am really stuck now.
I checked, my bootloader is 5.14, so that shouldnt be the problem, perhaps i need to reinstall activesync, or perhaps lumpistefans kitchen cooks up bad roms. :?:
Nothing wrong with any kitchen ROMs so far ... when ActiveSynce can't recognize the XDA then it's either a PC problem which uninstall/reinstall will solve it ... or it's a wrong RSU update.
The best option so far in case it's a wrong RSU is to copy the proper RSU upgrade (4 files) to the SD card ... insert the SD card into the XDA and copy those 4 files to the \windows\startup directory ... then soft rest.
If the RSU flash works fine the ActiveSync will recognize the XDA again then you can preform a new ROM update
Note: RSU flashing is risky ... do this action on your own responsibility!!
Biso007 said:
Nothing wrong with any kitchen ROMs so far ... when ActiveSynce can't recognize the XDA then it's either a PC problem which uninstall/reinstall will solve it ... or it's a wrong RSU update.
The best option so far in case it's a wrong RSU is to copy the proper RSU upgrade (4 files) to the SD card ... insert the SD card into the XDA and copy those 4 files to the \windows\startup directory ... then soft rest.
If the RSU flash works fine the ActiveSync will recognize the XDA again then you can preform a new ROM update
Note: RSU flashing is risky ... do this action on your own responsibility!!
Click to expand...
Click to collapse
I dont understand how i can have a wrong rsu? I didnt update it , as far as i know , i just updated the pda part. I only saw programme A.
Activesync does recognise my xda, because i can synchronize and explore my device. It does however take a long time before activesync sees the device after its connected. It also stops responding when its connecting, for a few minutes. I tried reinstalling activesync, this didnt help.
prowling said:
ActiveSync does recognise my XDA, because i can synchronize and explore my device. It does however take a long time before ActiveSync sees the device after its connected. It also stops responding when its connecting, for a few minutes. I tried reinstalling ActiveSync, this didnt help.
Click to expand...
Click to collapse
If there is something wrong with the RSU it will defeinitly slow the USB performance, not neceassary by wrong RSU flashing ... otherwise, check the pins of your cradle or the 22-pin connector of the XDA ... maybe one or more pins are bent or weared.
Tried upgrading the radiop stack and although the reception is slightly better... It still won't let me upload,
and its a new cable too :-(
Oh well looks like I am stuck with it.
Another way to upgrade firmware
Are there other ways to upgrade the bootloader from SD card from within the device or even to upgrade the OS from within the phone itself?
You know... as a last alternative?
You can use SD reader/writer from the PC using XDAtools ... once the .nbf file is on the SD card, use the normal SD flashing method.
Or you can use another XDA device from a friend to copy the file to your SD card
I am having the same problem. I have TMO 4.01.16 and since I installed I can't down/upgrade my ROM through EXE or XDA tools, it says my device isn't connected, but I can still connect with Active Sync and all that jazz
ha ha
I can fix all your problems!
How?
Finally got it to work, Although it was a little bit of effort to do so.
I went back to the kitchen and downloaded a NB1 cooked rom with the "B" Signature. Then I basically ran the TMobile Setup again...
Once the setup files were on my computer I overwrote their .NB1 file with the one I just cooked.
But.... I forgot to change the file for the Radio Stack.
The machine worked except for the phone and as something is still stopping me. *it was my first reboot* It wouldn't let me use a new radio stack.
Ended up that i kept on going in to the bootloader and eventually turned my radio off altoghether before trying an update.
Now I am back to a decent rom... (Cooked and modded version of the ATT Wireless rom) and I am almost really happy.
Now to figure out how to stop the annoying sounds starting off really low.
But til then... I'm 90% happy
Thespus2002 said:
How?
Click to expand...
Click to collapse
Use the Sd Method flashing!!
Tmobile roms won't let you upgrade from the usb, here's the link and it will guide you how to flash your device from the SD good luck
http://forum.xda-developers.com/viewtopic.php?t=3274
The way I described.. I had to use the USB method.
my current bootloader (6.22) will not allow me to boot from an SD card.
And XDATools will not allow me to downgrade it... Yet
on ur PC at \xdatools\binaries run this command: pnewbootloader.exe bootloader_5_15.nb0
Wish it was that easy. The phone still appears to be locked in the rom so I can't update the Bootloader. I keep getting a message that says.
Unable to flash in to offset, cannotg disable bootloader write protect.
Can Someone Tell Me How Or Give Me A Program To Sign On As Guest So I Can Install A Touch It Rom
you can search the forums for how to flash roms... there are so many different ways to do it.
If you have ActiveSync in XP or Mobile Device Center in VISTA.. and you are able to successfully sync your phone with your machine ... all the instructions you need are included with the Rom download. Try reading the directions.
I will help you, what kind of herald do you have, CID lock yes or no? Which provider?
secondxg said:
Can Someone Tell Me How Or Give Me A Program To Sign On As Guest So I Can Install A Touch It Rom
Click to expand...
Click to collapse
When you hard reset your PDA, and then connect it to your PC with activesync it will ask you to setup a new activesync session. Cancel that process and it'll be connected to activesync in guest mode. If you go to the help options in your PC for activesync and search on Guest it'll go into slightly more detail.
thanks a lot
oh yea... i got the original tmobile wing with the original rom. 4.10.531.3 wwe im tryin to install one of those tmobile original rom with touch flo. ima newbie so just tryin the simple til i get better at all this. dont wanna brick my phone
is this a reversible procedure? installing touch it?
Just purchsed the Orange M3100 phone but I cant sync it on my pc. Ive downloaded Windows Mobile Device Center driver for Vista 64bit. It doesnt pick up my phone. Please help, ive googled etc.
Running WM 5.
In settings>connections>usb to pc, uncheck "advanced network functionality". That might work...
Cheers...
also make sure its pluged directly into your pc (one of the ports on the back) not though a usb hub, thats the prob i had syncing my 3100
thanks ultramag69. it seemed to work
now can i use FREE HTC HERMES UNLOCKER v3a by pof using vista?
the instructions talk about active sync and windows xp but no vista
sorry but ive only used this phone for few hours
you can use the sd card method as described in its readme.txt that comes with it
thats the problem I dont have a sdcard yet. Just thought the XP instructions may work using Vista and WMDC.
I believe you need to update to the latest version of WMDC through my reading but you may want to confirm that. If you do a search through the wiki using terms like "vista activesync hermes" you should get a hit as it has been extensively talked about. Also please make sure you check what radio rom you have as unlocking the hermes will downgrade the radio rom to 1.16.00.10. MAKE SURE YOU KNOW WHAT RADIO YOU HAVE SO YOU AN PUT IT BACK...
If you want to use the sd card method (I find it safer than from the pc) then you need an sd card 2 Gb or smaller as though the OS can read a higher card the bootloader (the software in the hermes used to flash) can't. Don't forget to Hard SPL your hermes after you unlock it, I didn't need to do this but you can check by putting a sim from another carrier into your hermes. However, Hard SPL is a MUST. You can get instructions from here - http://forum.xda-developers.com/showthread.php?t=296722
Sd card method on page 116, post 1160. It has all the apps needed to flash both through pc and sd card.
Then you're good to go for flashing a new os.Look into each os on your own, read the post and make up your own mind, DON'T ASK WHICH IS THE BEST..... There is no "best" for everyone, you need to choose on your own. As for the Radio Rom, I would suggest ONLY using the sd card method as if you flash this it the thing that is MOST likely to brick your device if something goes wrong. DON'T INTERRUPT THE FLASH FOR ANYTHING!!!!!
As stated the unlocking will change your radio rom.
Read carefully each step of the guides and don't skip anything and you'll be fine...
Welcome and happy flashing,
Cheers...
hi ultramag69. flashed the phone today and it worked fine. the only problem i have now is when trying to update to wm6 i just get the 4 colours screen and lose sync. same when trying to hard spl 2.1. any ideas?
Is there a way to install HARDP-SPL from the micro SD card? I am able to flash any rom from my SD-Card, but I am no longer able to connect my Polaris to active sync. Get an error "USB Device not recognized" and I am not able to get synched. Now I have flashed several different rom's and also different radios, that works from the micro sd card. but I am still not able to connect with active sync. When I enter the bootloader mode then I just see that message "POLA100 MFG SPL-2.20.OliNex CPLD-2" So I guess the Hard-SPL is missing. Home I will get some help ;-)
If you step manually to bootlader mode and see the Olinex string, hard-spl is installed!
Thanks for your answer, didn't know that. However, I am not able to connect to active sync even though I have tried different ROM's and different Radios also, flashed from SD-card. Still no connection to activesync :-(
I have the exact same problem for almost a year now, flashing all roms with the micro sd card... and living without active sync :S
Hope someone can help us here
maybe 2 things :
1- your usb cable is ko...try with an another one
2- maybe the usb pins in your device are twisted or broken...
cheers!
ouioui01 said:
maybe 2 things :
1- your usb cable is ko...try with an another one
2- maybe the usb pins in your device are twisted or broken...
cheers!
Click to expand...
Click to collapse
1- the USB cable can't be the problem, already tried a different one, plus using my Touch pro with the same cable on the same computer
2- the pins, I don't know, they look good for what I can tell and it is strange because the phone will be charged with the usb cable
wish I would find a solution.....
fktsndr said:
If you step manually to bootlader mode and see the Olinex string, hard-spl is installed!
Click to expand...
Click to collapse
Can you dumb that down a bit? I don't have access to a windows computer, so I have to rely on the microSD. Is there a way to Hard-SPL the phone with the SD card? I performed a Hard-SPL on my Wing when I first got it, but I think it was an older out-dated version, cuz I get an "Invalid Certificate" error when trying to flash from my microSD.
Thanks,
-Adam
easy solution which I found
If you first install the .nbh file of the .72 stock spl using the micro sd card, then your device will not boot into the OS. Now run the Sony Ericsson update utility (which you can download from their website) and run it. It will try to upgrade the system through usb. After different steps, this software will ask you to reinstall the OS (the spl should match first) and then you can reinstall the stock spl and you are back to square one. Now from here, you can now go anywhere you like.
Note: The above method, I tried it myself and it worked. It might not work for everyone hence use it at your own risk. But if you have a bricked device, then there is nothing to lose.
can juststable be saved to microcard or do you have to go through the whole technical process ...ive read some of it and it seems ill never be able to get it ..i can save programs to my card and thats about it..unless some one has a simple step by step
1milenia said:
can juststable be saved to microcard or do you have to go through the whole technical process ...ive read some of it and it seems ill never be able to get it ..i can save programs to my card and thats about it..unless some one has a simple step by step
Click to expand...
Click to collapse
JustStable is a ROM. That's an equivalent to an Operating System on your computer.
Metaphor: Sure, you can run Linux off of a CD Drive, but Windows, no way!
Your SD card in your phone is similar to a CD drive. So, NO, you cannot install an operating system (ROM) onto your phone's SD card.
And one more thing...Flashing a ROM (installing it) isn't nearly as simple as installing a program. Just like how upgrading your Operating System on your PC compared to installing a program on it.
If you wanna upgrade and flash to JustStable, tell us, and we've got some guides that you can follow.
what's the first thing you download
1milenia said:
what's the first thing you download
Click to expand...
Click to collapse
First thing you do is go to: www.thewingster.com
Then you go to the ROM's section. Pick your ROM. Do NOT pick a ROM that says, LZX. Once you found a ROM you like, locate the How To Flash this ROM link on the ROM's page. Follow the instructions.
As it says, first, you download and extract your ROM. So, you return to your ROM's page and click DOWNLOAD. Then you unzip or unrar it. You might need 7zip for that.
Then follow the rest of the instructions. Got it?
one problem my wing wont sync to vista
1milenia said:
one problem my wing wont sync to vista
Click to expand...
Click to collapse
It should just fine. Let it stay connected for a while, it has to download the Windows Mobile Device Center, so that takes some time.
If you're on 64-bit, it still should work, but I've heard some problems with that.
make sure the device has been hard spl'd. or use uspl to flash.
sorry for being slow but could you explain most of the terms like spl...some of us are newbies to this ...also i have wmdc 6.1 and it wont connect
1milenia said:
sorry for being slow but could you explain most of the terms like spl...some of us are newbies to this ...also i have wmdc 6.1 and it wont connect
Click to expand...
Click to collapse
there are plenty of threads that explain this.
http://www.forum.xda-developers.com/showthread.php?t=327046
and seems like a video too...
http://www.gigasize.com/get.php?d=khbzp03s07f
That was posted from my phone, the 2nd link I saw. I'm sure you could have found that and more if you tried.
before i atemp this does anyone no why i cant sync with vista