Can someone tell me how to set an IP Adress on an XDA.
When I use the ping command I see that the XDA has IP Adress 192.168.55.101
But the network is 192.168.111.0/24
:?: :?
Those IP address are from active sync.
You may use passthough option in active sync to get access to that network.
I am able to connect via Wifi and getting IP address but the default gateway is sometime set and sometime not. When it is not set i can not surf the internet. Is there a way to set the default gateway in HEMRES ?
Someone , please help
All I need to know is how to set the deafult gateway to 192.168.0.1 same as DHCP Server.
DHCP should give it all the settings
might be worth looking to why your DHCP server isnt giving out the correct settings, but any way
Settings > Connections > Network cards > Network Adapters
you will have a list of the Adapters
at a guess it would be the IEE 802.11b/g Compatable wifi
tap on that
and it should give you some options tick Use Specific IP Address, put in the details
please note this will set the details for all wireless connections, so if only use wireless at home, then it will be no problem, but say you use it at home, at work and out and about at Hotspots, you may need to go in and change it back to using DHCP for it to work
DHCP server settings
might be worth looking to why your DHCP server isnt giving out the correct settings,
Click to expand...
Click to collapse
can you give some hints how to do that ?
I did what you said , in VxIPConfig it said DHCP Disabled, and got the deafult gateway as 192.168.0.1 . I couldn't surf the internet.
Please that from time to time I am able to surf the internet when everything is set to auto. When it happens I get the deafult gateway set (and not blank) and the DHCP is enbale
dotan_shai said:
I did what you said , in VxIPConfig it said DHCP Disabled, and got the deafult gateway as 192.168.0.1 . I couldn't surf the internet.
the DHCP is enbale
Click to expand...
Click to collapse
did you give it an ip addresss and subnet mask ?
eg for ip
192.168.0.10
subnet
255.255.255.0
is your DHCP server on a router or is it like a PC with WiFi running Internet connection sharing
I did what you say , this is what VxIPConfig said:
adapter address : 00-09-2d-b4-91-43
IP address : 169.254.210.158 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
still can not surf the internet , what is wrong.
dotan_shai said:
I did what you say , this is what VxIPConfig said:
adapter address : 00-09-2d-b4-91-43
IP address : 169.254.210.158 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
still can not surf the internet , what is wrong.
Click to expand...
Click to collapse
where did you get 169.254.210.158 from?
try 192.168.0.100
as i dont think you will have anything on that ip
with a 192.168.0.1 gateway and subnet mask of 255.255.255.0
your ip needs to be within 192.168.0.* range ( * = 1 to 255)
yeah a class c ip range is what one should use in ones internal lan
192.168.0.0 – 192.168.255.255
http://en.wikipedia.org/wiki/Private_network
Dear frinds,
Thanks a lot for your help , but still no change. This is what i got from VxIPConfig :
adapter address : 00-09-2d-b4-91-43
IP address : 192.168.0.100 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
The previous IP adress was the one that was set automatically before i changed it manulaly.
Still no surfing the internet. you said before :
might be worth looking to why your DHCP server
Click to expand...
Click to collapse
I'm not using a router it is
PC with WiFi running Internet connection sharing
Click to expand...
Click to collapse
the USB to Wifi adapter is configured as Ad-Hock.
dotan_shai said:
Dear frinds,
Thanks a lot for your help , but still no change. This is what i got from VxIPConfig :
adapter address : 00-09-2d-b4-91-43
IP address : 192.168.0.100 (which is what i set)
Subnet mask : 255.255.255.0
Deafult gateway : 192.168.0.1 (which is what i set)
DHCP server : 192.168.0.1
Primary WINS : empty
Secondary WINS : empty
Lease obtained : DHCP Disabled
Lease expaired : DHCP Disabled
The previous IP adress was the one that was set automatically before i changed it manulaly.
Still no surfing the internet. you said before :
I'm not using a router it isthe USB to Wifi adapter is configured as Ad-Hock.
Click to expand...
Click to collapse
I see now, the ip 169.254.210.158 would be when the ppc couldn't get an IP from the DHCP Server
just a thought
Have you input in some dns servers, should be on the next tab
these dns servers will do
dns 1: 4.2.2.1
dns 2: 4.2.2.2
how did you setup internet connection sharing on you pc ?
via network setup wizard ?
Network connections > Pick your internet connection > right click then properties > then click on the Advanced tab > then make sure the Allow other computers on the network to use this connection, tick box is checked
I added the DNS adresses settings in the PPC , still can not surf the internet.
how did you setup internet connection sharing on you pc ?
via network setup wizard ?
Click to expand...
Click to collapse
That's the way i set my internet connection sharing.
Network connections > Pick your internet connection > right click then properties > then click on the Advanced tab > then make sure the Allow other computers on the network to use this connection, tick box is checked
Click to expand...
Click to collapse
It is checked !! I remove the check in Allow other users to control or disable the shared Internet connection.
I've noticed that in success connection that allowing me to surf, the beacon icon in PPC is changing for 2 seconds to beacon without the circles and than return to its previous picture beacon with two circles. In a failed connection I always see the beacon with the two circles icon that never change.
Still no surfing is available. Any more ideas ?
SOLVED !!!
Thanks for the helpers. My problem is now solved. I've just read in D-Link site regarding configuring Static IP in here
After performing the recommended settings, everything is working always.
THIS THREAD CAN BE CLOSED
Glad its working
so did you need to setup a static ip for your pc, or did you use the guide and put the details in to your ppc ?
The static IP was set in the PC according to D-Link instructions . Hope this tread helped someone .
Here is the link to D-link , static IP settings :
http://support.dlink.com/faq/view.asp?prod_id=2594&question=DWL-G122
I need to tether my hermes to a pc at work that's already part of a network where the server's ip is 192.168.0.1, when tethering my phone, the phone uses the same exact ip. Is there a way for me to have the phone use another ip, say 192.168.3.1 so that I can use it with pc's that are already running on a network with that other ip?
Thanks your help would be greatly appreciated.
Is there a way to do this? By registry maybe? Any ideas?
Anyone knows of a program or something?
It depends which tethering method you're using
but basically, do this
Comm Manager / Settings /Wireless Lan / Menu / Network Cards / Network Adapters /
then click on whatever network interface you're using (lets take Bluetooth PAN Driver for example)
Use Speficic IP address
IP Address: 192.168.0.100 or whatever
Subnetmask : 255.255.255.0
Thanks, that's helpful!
The Bluetooth PAN program I have is looking for the MAC address, not the IP address. Any ideas on how I can determine that?
Walt
alkizmo said:
It depends which tethering method you're using
but basically, do this
Comm Manager / Settings /Wireless Lan / Menu / Network Cards / Network Adapters /
then click on whatever network interface you're using (lets take Bluetooth PAN Driver for example)
Use Speficic IP address
IP Address: 192.168.0.100 or whatever
Subnetmask : 255.255.255.0
Click to expand...
Click to collapse
hi there.i want change my celluler line dns server to opendns ip which is 208.67.220.220 and 208.67.222.222.sometimes my gsm company dns server is stuck so i cant connect internet,also sometimes they block some websites as well.so i am changing my dns server in registry HKLM\comm\Cellular Line\Parms\Tcpip\ under dns but after re-connect to internet it turns default dns ip.when i was using kjam with custom rom i ve never had hat proplem.please help guys.thanks in advance.
at the same time the ip address option in the advance setting is ' unavailable '
my os http://forum.xda-developers.com/showthread.php?t=1434860
wahiedi said:
at the same time the ip address option in the advance setting is ' unavailable '
my os http://forum.xda-developers.com/showthread.php?t=1434860
Click to expand...
Click to collapse
I need your help
wahiedi said:
I need your help
Click to expand...
Click to collapse
Unless there is another computer with DNS Server in your ad-hoc network, you won't get an IP address in ad-hoc. I haven't used ad-hoc on my phone, so not sure about manual IP addressing, but if wifi is connected (connection established) you should get the advanced option.
Swyped from my HTC HD2 using XDA Premium