Can someone tell me how to set an IP Adress on an XDA.
When I use the ping command I see that the XDA has IP Adress 192.168.55.101
But the network is 192.168.111.0/24
:?: :?
Those IP address are from active sync.
You may use passthough option in active sync to get access to that network.
Related
When I plug my JasJar into my PC, I get a message "Pocket PC Networking: Unable to obtain a server-assigned IP address. Try again later or enter an IP address in network settings"
Please could someone with a JasJar go to Settings>ConnectionsNetwork Cards and tell me if every adaptor is set to "Use server assigned IP address" EXCEPT "Remote-NDIS Host" which is set to server assigned, but has an IP address in the lower box.
If yours is any different, please tell me what's different so I can fix mine up.
Everything set to be Obtain Automatically only... I changed only DNS entry for WLan NE2000 card.. rest all left as automatically updatin...
thanks dude!
When i connect my 8125 to my computer, i get the following error message
Pocket PC Networking
"unable to obtain a server assigned IP address. Try again later or enter an IP address in Network Settings"
Can somebody walk me through what I should do?
Kanjibankers said:
When i connect my 8125 to my computer, i get the following error message
Pocket PC Networking
"unable to obtain a server assigned IP address. Try again later or enter an IP address in Network Settings"
Can somebody walk me through what I should do?
Click to expand...
Click to collapse
Getting the same here with my XDA Mini S, I have to unplug it and plug it back in for it to assign. Strange thing is that it still synchs???
I got those messages, too. I could sync fine, but the messags bugged me. You can Google the error message and find the answer at Microsoft.com, which is...
Settings -> Connections -> Network Cards -> Network Adapters (tab) -> Remote-NDIS Host
"Use specific IP address"
IP Address: 169.254.2.1
Subnet mask: 255.255.0.0
Default gateway: 169.254.2.2
My LAN uses 10.0.18.x addresses, but I think it's something between the device and ActiveSync.
thanks phoney, it works a treat.
I am having trouble trying to access my home laptop via my MDA.
Under my work network I created a new connection,
Name: Laptop
Host name/ IP: specified my IP (Tried with computer name before)
VPN type: What do i select here L2TP or PPTP
When I click next I am asked to enter username and password (I guess this is the username for my laptop). I have not touched the default settings under the advanced section.
Use server-assigned IP address was selected by default.
When i try to connect after i while i get the message, unable to connect check username and password.
Please advise what I am doing wrong. Thanks for your help in advance.
To use the Terminal Services Client its under programs. Then you enter the external IP address of your laptop and it should connect if your laptop/router at home is configured correctly.
1. Enable Remote Desktop Connection
2. Forward the port 3389 to your laptops IP (Done in your rourter)
3. Launch Terminal Services and enter your home network's IP address or dns name.
Hi,
Can any body help me in defining gateway address on my imate jasjam. I want to browse internet on my device and without defining gateway address, i am unable to do so.
I've used "wifi profiles" software and defined manual ip, gateway and dns but it is not retreiving gateway settings. At my workplace, there is a dhcp server which is automatically assigning an ip address to my device.
Regards,
Kashif Mehmood
Here is a simple guide to share you PC or Laptop internet connection with your phone through wifi.
Download and install connectify on your PC or Laptop. Do a google search, you'll find Connectify-Lite for free.
Fill in the settings panel with your prefered WiFi name, password and internet connection to share.
Click start button to start sharing
On your Wireless Connection Status, click Details to get the network connection information, note the IPV4 Address
Now on your Android Device
Go to Settings -> Wireless & networks -> Wi-Fi Settings
Open Advance settings menu
Tick the Use static IP option
Enter your desired IP address (ex: 123.456.7.8) into Ip Address field
Enter your IPV4 Address (ex. 192.168.178.1) into Gateway field
Enter 255.255.255.0 into Netmask field
Enter your internet connection’s DNS server (use ipconfig /all command to get DNS info) into DNS 1 and DNS 2. As an alternative, you can use Google Public DNS: 8.8.8.8 and 8.8.4.4
Connect to Wi-Fi using your password
Disable and Enable Wi-Fi (in case if it won’t connect)
It will start working on your android device.
The reason that you need to do all this is you don't have DHCP server enabled on your windows machine for connectify.
An alternative way is to use "Internet Pass through" USB connection mode. In this case windows will automatically enable a DHCP server.
I have attached the screenshots with the post.
Please ask if you have any further query.
Hit the thanks button if you find my post useful.
I dont understand, what does this accomplish? If you have wifi just connect to it.
Mog said:
I dont understand, what does this accomplish? If you have wifi just connect to it.
Click to expand...
Click to collapse
It helps you share your PC internet connection with your phone through wlan if you don't have a wifi connection and your PC is connected to internet via ethernet.