Database Users

Cheapest Wizard Car Holder Ever!

Wilkinson (a UK hardware store chain) have a generic own-brand mobile phone holder which costs 1.49 and although a very slight bit wobbly when stuck in my air vents, does the job a treat.
I had to chop off a bit of plastic at the bottom with a hacksaw to allow the charger to go in, but aside from that, it was straight in. Did a test drive and it did wobble slightly, but not enough to cause anything to happen.
Beat that for price.
Maybe I won't bother with Brodit after all... :lol:
Joe

plz post a picture!
My brodit landscape holder is gr8 for me

Yeah please post a picture of it - wanna see this "miracle-cheapo-holder" :wink:

Here you go: best I can do at night with a crap (HTC Universal) camera I'm afraid. More tomorrow in daylight if required!
And don't get me wrong - this is total ****e compared to a Brodit, I would have thought. But it's cheap, and I'm a Yorkshireman :wink:

Not having air vents (Land Rover Defender) I had to purchase one that has a sticky pad which fits beautifully on the dashboard. It cost £7 from Vodafone who appear to be the only place that actually sells them anymore.

DREAMBOXER said:
Yeah please post a picture of it - wanna see this "miracle-cheapo-holder" :wink:
Click to expand...
Click to collapse
Dreamboxer,
in germany the MediaMarkt has also such a cheap car holder - round about 5 Euros. It is very similar to this one and iam very satisfied with it. For pictures follow this link:
http://www.pocketnavigation.de/board/thread.php?threadid=1011832

lozzd said:
Not having air vents (Land Rover Defender) I had to purchase one that has a sticky pad which fits beautifully on the dashboard. It cost £7 from Vodafone who appear to be the only place that actually sells them anymore.
Click to expand...
Click to collapse
I forgot to mention, it comes with a sticky pad as well (ooh the luxury of Wilko's )

lozzd said:
Not having air vents (Land Rover Defender) I had to purchase one that has a sticky pad which fits beautifully on the dashboard. It cost £7 from Vodafone who appear to be the only place that actually sells them anymore.
Click to expand...
Click to collapse
I forgot to mention, it comes with a sticky pad as well (ooh the luxury of Wilko's )

Do you know if will send by mail to Portugal?
Can you take daylight fotos?
Thanks

Here are some daylight photos.
I am not sure about postage, but I will be doing a 140 mile drive tomorrow and will post with my opinions of a long drive with it.
If it's good, and we can work out a way to post it and pay, then I will do this for you.

Thanks

OK - I've been to Wilko's and handed over my hard earned £1.49.
It comes with a little bracket that can be bolted/screwed in - so I think I'll
use that. Joe - where did you get your car charger - I checked Wilko's -
they didn't have any.

I got it from Ebay, I think it's one intended for a iMate Jam, but not a genuine part.
They should be available for Wizards by now I would have thought.
Joe

joebongo- This one is for £4.99 in a local phone shop, it's supposed to be a desktop universal phone holder but i put it in the windshield and it works for me-

i grabbed one of these from wilkinsons today too... looks really cheaply made, but what do you expect for less than £2 !! Im going to use the vent holder and see how that works out... to be fair, thinking about it, it actually looks better made than the one i had last year that was about £8 !
EDGE

magnetic disk
I use a magnetic disk from cpw and put the metal strip inside battery cover. used with all my phones in the past and never once have I dropped my phone, even 30mph accidentally over speed hump, which loosened my fillings. yet no drilling and looks cool on dash. Am i the only person using this?

:lol: im gonna pop down there today and buy the holder live 2mins from my local high street 8)

joebongo, i went to the shop but they said they dont sell mobile phone stuff.....? where did you get yours from because i went to a large store..not the small ones :?:

When I had a Samsung I stuck a velcro pad to the dashboard and to the back of the phone. (Furry side on the phone!) Worked brilliantly.
With the Exec I might put velcro on the bottom and on the top of the dashboard, and mount it there. Maybe above my steering column - if I write my own app with mirror writing I could fold it down in PDA mode & have a HUD :twisted:

topcaser said:
DREAMBOXER said:
Yeah please post a picture of it - wanna see this "miracle-cheapo-holder" :wink:
Click to expand...
Click to collapse
Dreamboxer,
in germany the MediaMarkt has also such a cheap car holder - round about 5 Euros. It is very similar to this one and iam very satisfied with it. For pictures follow this link:
http://www.pocketnavigation.de/board/thread.php?threadid=1011832
Click to expand...
Click to collapse
Cool thing! Sadly I shelled out 40 EURs for the XGPS Active Holder Thingy. It should arrive tomorrow. Oh well - damn could have saved some dough

Car Holder For Kaiser (UK)

Anybody got any nice ones?
I've been looking on Ebay and found a couple of good sounding ones, and even somebody posted a nice link a few pages back. http://www.mobilefun.co.uk/product/14751.htm
But Whats a good one available in the UK? That one certainly seems interesting, the detachable bits seem quite good.
But my car, interior seen here http://homepages.tesco.net/~Christian.Newman/C3%20INTERIOR.JPG has the stearing console quite far from the actual base of the windscreen, where I assume I would attach.
Is there a good model I cant find that will fit the Kaiser perfectly, and have the slightly longer reach I am looking for.
Idealy not willing to spend over £20, but if people know of a top quality product, I am go over my budget.
Thanks,
MJ

personlly, i wouldnt bother risking 400 quids worth of phone with a suction mount!
brodit holder about 25 and an a screewless http://www.dashmount.co.uk/ or bend up a bit of metal yourself.
c3 braket, not the greatest possition tho, http://www.dashmount.co.uk/april06/711078.htm
the older model might suit you better, http://www.dashmount.co.uk/march02/c3.htm

Any universal cradle/holder will work but you get what you pay for. The Brodit mounts are reported to be excellent quality and allow the Kaiser to be used closed or with the keyboard out. They are available as passive or active (built in charger) and both types alow you to rotate between Landscape and Portrait. They work well with the Proclip mounts which are specific for individual cars. I wouldnt trust a suction type mount with my Kaiser , that may just be down to my driving style though. Have a look at the other threads on here for more inspiration. As far as I am aware no one currently sells the Holy Grail of mounts which would be Charging/Audio out/Mic/Rotation/Keyboard open or closed. There are however several homebrew solutions in the other threads on here and in the Hermes forums.

Poor Quality Tilt Car Cradle Review

Review of AT&T Tilt GPS Car Mount form JustPal at justpal.com purchased on eBay.
http://cgi.ebay.com/ws/eBayISAPI.dl...rksid=p284.m183&_trkparms=its=S%2BI%2BSS%2BSD
This is not directed at JustPal other than their typical shipping policy. They do have a generally good record. I did get the same item that was advertised on eBay at other retailers for 10-20 dollars more than their price of 35.99. Other retailers use the same picture so I would imagine it is the same unit. The shipping was $10.95 (now it is $12.65) which was lower than most also. Also their shipping was fast.
Their return policy is similar to others on eBay which is they don't credit shipping so I would have to pay return shipping and new shipping (which has now gone up)and thus the cost is prohibitive to exchange it. Plus I destroyed the packaging opening the item and that would void the return. It would be cheaper to just buy another and have it sent immediately and not have to wait for them to examine the package and perhaps tell me I am not eligible for an exchange. I would be out the return shipping and still pay new (higher) shipping.
My quandary is this: should I chance another one as this may be a fluke of a defect or it may be a trend. Or should I wait for one that is probably twice as much and purchase it from someone with a better shipping and return policy along with hopefully better quality. Perhaps someone else will take the chance on one and it will be ok.
Here are my issues with the Cradle:
1. At first I didn't even think it was going to match up with the USB on the bottom of the Tilt and I was a bit reticent to force it as that is a weak link. I wiggled it quite a bit but it finally slide on with a fair amount of pressure. I had the thought that perhaps the stylus was causing it to be offset a bit so I removed it and it did go on easier but still requires some fiddling with it. It may loosen up a bit in the future with some use but the fit of the cradle is fairly tight which is a good thing. The unit has a label that states CM-A8925 which would indicate that someone thinks it will fit but they must have not tried it.
2. I didn't plan on using he suction cup mount so I didn't try it as I wanted to use the vent mounts because I travel and rent cars frequently. Unfortunately they do not fit very secure in my Toyota Matrix. Others with more and flatter louvers may be better.
3. Now for the REAL PROBLEM; when I first plugged it in there was a noticeable buzz in the speaker. It seemed to change as I opened and closed items and then when I started up TeleNav, which has an icon that resembles a spinning propeller, the speaker "popped" each time the propeller fin rotated. It would appear that there is some type of shielding needed between the speaker and the Tilt. VERY Annoying!!!
4. Well, annoying that was while the speaker lasted!! I unplugged and re-plugged the "hands free" wire (a short wire with a microphone that plugs into the upper unit and the speaker) a couple of times and the speaker quit working altogether. Now I have gone being from annoyed to completely disgruntled. After inspecting the unit it was found that the upper connection was loose and wiggled with the connector plugged in. If I did hold the connection in tight, it would again cause the speaker to work, albeit with the same annoying fizzing and popping. Finally it quit altogether.
5. A "tab" which is used to glue the front and back together on the side with the defective connector is not as smoothly mated with the side piece as the one on the other side.
6. A small clip on the vent mount that is meant to "snug" it up fell off inside the vent and now rattles while I drive.
7. The mount which connects to the base unit and either the vent bracket or the suction cup was very difficult to get on and once on damn near impossible to get off.
That is about it. I guess I don't need to say I would not recommend this to anyone. A $46.46 lesson which I can't say was worth the money just to publish this review. I really expected at least something functional. Oh well, I have a speaker (poor that it is) and a USB connector to play with and see what I can do with them.
Hope this helps others.

what i did to get it to work
Hello i to bought 1 of those mounts not from them but somebody else on ebay. I wanted to use the mounts for the vent too, so when i got it i took it out of the box it looked good so out to the car i went while going down the steps to get outside i heard something hit the floor and it was that little mounting thing that supposed to keep it tight on the vent .. So now at closer look they will not work so i decided to use the suction mount which i think works great , now on to hou i got my tilt to fit the case mine also would noy slide into the usb mount it took me awhile to get it in .... and i was think wow this is not good going to break my phone right off ..
So i took it into my shop and got a dremel tool out and went to work on the inside off the mount on the sides i kept taking a little of both sides untill it slide in easy and perfect now it fits great and i think it will not harm the usb deal.
On to the speaker mine also makes all kinds of noise but it deos work great with tomtom and navmaps if you mess with the wire and get it just perfect the noise will go away i can live with a little noise also when my phone is by my computer at home the noise also comes through my speaker ...
just thought i would add my 2 cents worth if i new what i know now i would of not bought this mount but i did get it to fit perfect after a hour or so with the dremel tool
Al
'

Thanks for the tips. If I can get the speaker to work again I will try the shaving trick. I don't think I will try another one of these but wait on someone to try some other vendors.

i bought the oncourse 3 mount for the tilt from buygps.com and it has a FM transmitter built in. I comes with only the suction mount.
It works as advertised. I used this last weekend while driving and found that over all it is a nice product. I was like $40 inluding shipping or something. I like the FM trnasmitter BC i can now listen to my podcasts on my radio rather than using headphones or such.
it definately isnt perfect but it does work.
my 2cents.
http://www.buygpsnow.com/Product/On...andT-Tilt--HTC-P4550TyTN-II--Kaiser__958.aspx
it got it on sale last week.

Hmmmm ... so it arrived broken? Irregardless of what their return policy is, I'm pretty sure they have to replace it or offer a solution unless it is listed as "as-is". I'd check Ebay/PayPal on that. You shouldn't be out the funds to replace an item that was broken to begin with.

I ordered one of these too. How is the charger? I heard the brodit ones fry the device. Does the speaker interfere with bluetooth handsfree?

Hmmm
Had exactly the same problems with a very similar sounding mount. It was very difficult to get it to mate up (too difficult to use regularly), it screamed when I did get it in, then the device went into a soft reset loop like something was permanently pressing in the reset recess.
I shall be returning mine for a refund and I'll wait until they get a new / better batch.
Hmmm.

Just got mine and I have the same problem with the connector not aligned. I think I will swap it for the one with the FM transmitter. I don't need the FM since I have a bluetooth stereo but I can use it in other cars.

New Item I found
well even tho i got mine other 1 to work with the dremel tool i think i will get this 1 instead..
http://www.tiltdepot.com/seidio-g4700x-charging-vechicle-mount/3A78A3465.htm
AL

adidas4275 said:
i bought the oncourse 3 mount for the tilt from buygps.com and it has a FM transmitter built in. I comes with only the suction mount.
It works as advertised. I used this last weekend while driving and found that over all it is a nice product. I was like $40 inluding shipping or something. I like the FM trnasmitter BC i can now listen to my podcasts on my radio rather than using headphones or such.
it definately isnt perfect but it does work.
my 2cents.
http://www.buygpsnow.com/Product/On...andT-Tilt--HTC-P4550TyTN-II--Kaiser__958.aspx
it got it on sale last week.
Click to expand...
Click to collapse
I too, bought this same unit. I really like mine. I've had no problems with it.
The only thing that dissapointed me, was that the quality of the sound from the FM broadcast from the unit. It's definately strong and clear, but it sounds muddy. It's not great for music. It works just fine for GPS though.
I use it with TeleNav and I have no issues with it. It's a good, solid unit.
I've not tried connecting the audio via a cable yet, however. I don't have a stereo in my car that accepts input that way. I plan on upgrading though.

G4700x NOT for TILT
NinJak101 said:
well even tho i got mine other 1 to work with the dremel tool i think i will get this 1 instead..
http://www.tiltdepot.com/seidio-g4700x-charging-vechicle-mount/3A78A3465.htm
AL
Click to expand...
Click to collapse
I had also considered tht one until I read this:
Hi Nick,
We’re sorry for the confusion. The G4700x car kit for PPC6800 is only compatible to use with the HTC mogul with Sprint and will not compatible to use with Tytn II, Kaiser or Tilt. We’re still working on the Kaiser car kit, but at this we do not have an ETA.
Thank You for contacting Seidio
Kelvin Chung
Technical Specialist
Seidio, Inc.
And I got this response back from Seidio asking to put on a list for when the TILT car kit comes out:
Dear Jim,
Thank you for your inquiry at Seidioonline. We will be happy to assist you with your concern. The car mount will not be coming out any time soon. We do not have a list for those requesting this mount; therefore, the best way to be updated is checking our site www.seidioonline.com
So, I guess we are back to trying various ones that "claim" to work until we find one that does work.

On a side note, one of those sites had this:
*Notice to Drivers in California and Minnesota:
State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. We recommend the use of Arkon AP020 90mm Circular Disc w/ 3M Adhesive [SKU 961] to transform any windshield mount into a console mount. Easy PocketNAV, Inc does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)
I'm in California, but I think I'd still roll with one of those suction cup ones with the FM transmitter... looks like a quality product.
Ticketz be damned.

Very Good Mount Found on E-Bay
This is my first post, I usually read and try to soak in as much information as I can. I was reading this post and had to contribute;
I recently purchased a mount from GPSLot, an E-Bay store, I opted for the "Buy it Now" at $10.00 + $5.00 shipping I figured I couldn't go wrong. I also purchased a mini USB and 3.5mm Stereo Audio Adapter, which allows you to charge your Tilt II and you have the stereo jack (my Nissan Titan has an input jack in the dash). I received both items in 4 days at $22.00 shipped!
I am very happy with the mount. My truck has a very long dash, so I put the mount on the dash because my windshield is just too far away. It is has 2 different axis' to adjust and the cradle rotates letting you turn your Tilt II on either side or leave it straight up. The phone is held in place by a spring loaded catch that tilts back to let it slide right in. I was afraid it was going to be one of those stiff plastic cradles that put alot of pressure on your device as it is being installed or removed, but that isn't the case.
My wife has a Tom-tom One, and I have a Mio Digiwalker c220, so I have something to compare this mount to. I like the way this one sits and the adjustments much better than either of the actual GPS mounts.
You can browse the store and see what you think,
http://stores.ebay.com/GPSLot
I don't know how long this following link will be good but have a try,
http://cgi.ebay.com/HTC-TyTN-II-Til...ryZ75447QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Bicycle Mount ARKON SM227 pics/review

Today I installed the Arkon SM227 bicycle mount. The mount is very sturdy and holds my tilt with seidio case quite well. When the tilt is in the mount, no matter how hard I shake the mount, the phone does not come out. I am very impressed with this $10.00 US dollar mount. I did remove the two bottom stops so the phone could fit further down on the mount.
Would I take it mountain biking? Probably not, but 90% of the time I am trail riding and it will serve me very well.
Jeff
http://tonyandjeff.spaces.live.com/photos/cns!1C598FC7B134B0D9!167/

I'm kinda disappointed
Mine keeps coming out because is just not quite wide enough, but I don't have the skin on mine that you do. I think that must help a lot. What skin is that?

I'd be more inclined to mount it on my top tube or stem - if you come off the bike then your phone will take all the impact, whereas it's slightly protected if on the top tube.
al

would be cool thing i think so that one could use the gps features of the phone.

Where to purchase one?
Hi Jeff, Where do you get it from can you give me the sites thanks

[Q]Best Car Mount fo Nexus 4

i came from Htc one X and i was using kidigi car mount, and was nice because i just need to "dock" in the mount no need to "plug" the wire like in universal mount. i read here about wireless car charger but not sure, its kind expensive and im kind temted for htc one (and this phone does not have wireless charging capabilities) so im not sure if i should buy. i was thinking something like this
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110978510653&ssPageName=ADME:X:RTQ:US:1123
i heard about clingo but not sure how many "uses" you need before the need for wash. so anyone knows a good car mount? should i buy for n4 or universal? if you had a link would be nice (ebay ) because amazon its to expensive to my country =X
Thanks a lot

zen kun said:
i came from Htc one X and i was using kidigi car mount, and was nice because i just need to "dock" in the mount no need to "plug" the wire like in universal mount. i read here about wireless car charger but not sure, its kind expensive and im kind temted for htc one (and this phone does not have wireless charging capabilities) so im not sure if i should buy. i was thinking something like this
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110978510653&ssPageName=ADME:X:RTQ:US:1123
i heard about clingo but not sure how many "uses" you need before the need for wash. so anyone knows a good car mount? should i buy for n4 or universal? if you had a link would be nice (ebay ) because amazon its to expensive to my country =X
Thanks a lot
Click to expand...
Click to collapse
I always go universal, personally. Because I can probably use the same mount down the road or my wife's phone can fit in it as well. The one you listed is good but also I like the iottie universal mounts as well.
http://www.ebay.com/itm/iOttie-Easy...716445?pt=PDA_Accessories&hash=item27cf4df1dd
These have the "gel" cups rather than the plain suction cups that easily warp in the hot sun. The gel pads are really sticky like the clingo, but the suction cup can be wiped clean with a damp lint free cloth to reconstitute the adhesive gel it uses. I use two different car mounts.
One is the Kropsson Aero which fits both my N7 (naked) and N4. I since cut the cushion pads down so that I can use it with my N7 with the Seidio Active case on lol.
http://www.ebay.com/itm/AER-jumiss-...040?pt=GPS_Holders_Mounts&hash=item4605c94078
And my second go to mount is mainly for my N7, the Xenomix NX2000 because even though I can use the above kropsson, the N7 does slightly obstruct my view. This Xenomix hangs off the dash a bit and keeps the N7 out of sight and I can clearly see out. Another 'good' thing is that I can use this with my N4 as well. I say "good" because you can't charge the phone while using this, the ports are covered lol.
http://www.ebay.com/itm/XENOMIX-2X-...der_Mounts_Stands_Holders&hash=item3f20968a39
There's my .02

kpjimmy said:
I always go universal, personally. Because I can probably use the same mount down the road or my wife's phone can fit in it as well. The one you listed is good but also I like the iottie universal mounts as well.
http://www.ebay.com/itm/iOttie-Easy...716445?pt=PDA_Accessories&hash=item27cf4df1dd
These have the "gel" cups rather than the plain suction cups that easily warp in the hot sun. The gel pads are really sticky like the clingo, but the suction cup can be wiped clean with a damp lint free cloth to reconstitute the adhesive gel it uses. I use two different car mounts.
One is the Kropsson Aero which fits both my N7 (naked) and N4. I since cut the cushion pads down so that I can use it with my N7 with the Seidio Active case on lol.
http://www.ebay.com/itm/AER-jumiss-...040?pt=GPS_Holders_Mounts&hash=item4605c94078
And my second go to mount is mainly for my N7, the Xenomix NX2000 because even though I can use the above kropsson, the N7 does slightly obstruct my view. This Xenomix hangs off the dash a bit and keeps the N7 out of sight and I can clearly see out. Another 'good' thing is that I can use this with my N4 as well. I say "good" because you can't charge the phone while using this, the ports are covered lol.
http://www.ebay.com/itm/XENOMIX-2X-...der_Mounts_Stands_Holders&hash=item3f20968a39
There's my .02
Click to expand...
Click to collapse
thanks a lot, i will check aereo seems nice and the price its cool as well, the only thing i need check on my car its since i had long legs i usally put my seat a little far from dash (and the dash its kind far away by car model :S) the aero can stick on the wind and dash? imean i can put into the dash and then the wind and the again in the dash without problems? just cleaning the gel?
Thanks a lot i really apreciate

zen kun said:
thanks a lot, i will check aereo seems nice and the price its cool as well, the only thing i need check on my car its since i had long legs i usally put my seat a little far from dash (and the dash its kind far away by car model :S) the aero can stick on the wind and dash? imean i can put into the dash and then the wind and the again in the dash without problems? just cleaning the gel?
Thanks a lot i really apreciate
Click to expand...
Click to collapse
The Aero is not meant to be placed on the windshield. In that respect look for the iottie's with the cushioned grips that can do both windshield and dash.
http://www.ebay.com/itm/iOttie-Easy...686615?pt=PDA_Accessories&hash=item51a00ef857
This is the "one touch" mounts. Where you just press the phone back slightly will release the grips. This is similar to the Aero I have. I just don't like putting suction cups on my windshield.

ProclipsUSA
Best car mount?
If you want the best, be prepared to pay for the best.
http://www.proclipusa.com/
Look up the different DEVICE holder for the Nexus 4.
Look to find a mount suited for your VEHICLE.
I got the swivel mount for my accord and it came up to about $80. It's a bit on the pricier side, but these are truly the BEST mounts you will ever use, hands down.
Regards,

100% agree that Proclip (US name for Brodit) are the best mounts you can get. They're pricey but worth it.
I'm actually looking to sell my Nexus 4 mount with integrated charger, so shoot me a PM if you're interested in a bit of a cheaper price (you'll still need the vehicle plate). I'm only getting rid of mine since I've started using a case for my phone instead of going naked.

var1126 said:
Best car mount?
If you want the best, be prepared to pay for the best.
http://www.proclipusa.com/
Look up the different DEVICE holder for the Nexus 4.
Look to find a mount suited for your VEHICLE.
I got the swivel mount for my accord and it came up to about $80. It's a bit on the pricier side, but these are truly the BEST mounts you will ever use, hands down.
Regards,
Click to expand...
Click to collapse
They are nice, my issue is that if I need a mount for my car and I can simply move from car to car without worry if the proclip will fit. From my understanding proclips fit a specific car model. So not really universal when you can use it in one model of a vehicle. So I'll need to buy two of these mounts to make it work and while worthwhile in the long run, 1. Is too expensive, 2. and what if I need to buy a new/different car for whatever reason?
And can you use different cases with these mounts? I see the one that can fit "some cases" but there's a limit there. A 40 plus 30 clip for each car, makes it about $140usd to be used each car.
Those factors alone, keep "ME" from buying it.

kpjimmy said:
They are nice, my issue is that if I need a mount for my car and I can simply move from car to car without worry if the proclip will fit. From my understanding proclips fit a specific car model. So not really universal when you can use it in one model of a vehicle. So I'll need to buy two of these mounts to make it work and while worthwhile in the long run, 1. Is too expensive, 2. and what if I need to buy a new/different car for whatever reason?
And can you use different cases with these mounts?
Those factors alone, keep "ME" from buying it.
Click to expand...
Click to collapse
seems like the phones, new phones new cases and accs xD but yeah they are specific as far i see. iOttie seems good pick

They have a system to swap the mount from car-to-car but you'll still need the car specific mount in each car, so if you're constantly swapping they don't really make sense.

Knolly said:
They have a system to swap the mount from car-to-car but you'll still need the car specific mount in each car, so if you're constantly swapping they don't really make sense.
Click to expand...
Click to collapse
oh i see, i dont really switch from cars" lol i will check how much and if they shipp to mexico =X

I use a ballistic case and the garmin gps holders grip it real well. There are two small cut outs in the sides of the case that aid in the grip.
They're only a few bucks on ebay or like $20 at best buy.

I'm using the Mountek mount that goes inside the CD drive. I don't use CD's anymore so it doesn't get in my way. I think it's a little pricey but totally worth it. Depending on your console it may get in the way of some of your buttons which it doesn't on my car. Also, some cars (such as my grandma's) have the CD slot lower in the console and the phone would be too low for me.
Mountek nGroove
I almost went with the Exogear Exomount 2 but I didn't think it would stick to my dashboard since it's textured and contoured a bit.
Exogear Exomount 2
I use the mount for maps and with a OBD2 Adapter. Now I just need the Jabra Cruiser 2 to go on sale so I can have a complete setup.

eliter1 said:
I'm using the Mountek mount that goes inside the CD drive. I don't use CD's anymore so it doesn't get in my way. I think it's a little pricey but totally worth it. Depending on your console it may get in the way of some of your buttons which it doesn't on my car. Also, some cars (such as my grandma's) have the CD slot lower in the console and the phone would be too low for me.
Mountek nGroove
I almost went with the Exogear Exomount 2 but I didn't think it would stick to my dashboard since it's textured and contoured a bit.
Exogear Exomount 2
I use the mount for maps and with a OBD2 Adapter. Now I just need the Jabra Cruiser 2 to go on sale so I can have a complete setup.
Click to expand...
Click to collapse
yeah i was looking something like this on CD because my ibiza has too far the dashboard and it has inclined surface, seems the best its wind screen or CD, something that i want to know its "privacy" in middle of my car if a wild message appear or something i dont like people look at it. so its any way to move a little to my side?? (not talking abot 360 degrees) more like turn the holder to my side. i hope its clear this
Thanks

zen kun said:
yeah i was looking something like this on CD because my ibiza has too far the dashboard and it has inclined surface, seems the best its wind screen or CD, something that i want to know its "privacy" in middle of my car if a wild message appear or something i dont like people look at it. so its any way to move a little to my side?? (not talking abot 360 degrees) more like turn the holder to my side. i hope its clear this
Thanks
Click to expand...
Click to collapse
It doesn't slide but there is a considerable amount of tilt. You wouldn't be able to hide it from someone in the back seat but the person in the passenger seat would have to move in order to look at the screen. Again, this probably depends on how your console is set up, mine is dead center.

eliter1 said:
It doesn't slide but there is a considerable amount of tilt. You wouldn't be able to hide it from someone in the back seat but the person in the passenger seat would have to move in order to look at the screen. Again, this probably depends on how your console is set up, mine is dead center.
Click to expand...
Click to collapse
im interested in passenger mainly thanks i will take a look seems its nice spot. when driving you had problems idk calling,waze and so on? watching the phone instead wind screen?

zen kun said:
im interested in passenger mainly thanks i will take a look seems its nice spot. when driving you had problems idk calling,waze and so on? watching the phone instead wind screen?
Click to expand...
Click to collapse
The phone is at a perfect height for me. For maps I don't look at the screen very often because the turn by turn directions are enough most of the time. Calls are not perfect with the speaker phone or with voice commands (I have to scream to the phone) that's why I need to buy a bluetooth speaker phone.

eliter1 said:
I'm using the Mountek mount that goes inside the CD drive. I don't use CD's anymore so it doesn't get in my way. I think it's a little pricey but totally worth it. Depending on your console it may get in the way of some of your buttons which it doesn't on my car. Also, some cars (such as my grandma's) have the CD slot lower in the console and the phone would be too low for me.
Mountek nGroove
I almost went with the Exogear Exomount 2 but I didn't think it would stick to my dashboard since it's textured and contoured a bit.
Exogear Exomount 2
I use the mount for maps and with a OBD2 Adapter. Now I just need the Jabra Cruiser 2 to go on sale so I can have a complete setup.
Click to expand...
Click to collapse
I have a similar setup in my Truck. I have a JVC head unit that has an external AUX port where my HTC Car Stereo stick goes to stream stuff from my N4 or N7. Use either Aero or Xenomix mount for my device, or none at all and to answer any calls, I use a Parrot Minikit Neo. This little guy goes to deep sleep and wakes up when the door opens or closes and I customized it with a greeting and signing off greeting which greets my 4 yr old when we get in the truck. She loves it lol.

kpjimmy said:
I have a similar setup in my Truck. I have a JVC head unit that has an external AUX port where my HTC Car Stereo stick goes to stream stuff from my N4 or N7. Use either Aero or Xenomix mount for my device, or none at all and to answer any calls, I use a Parrot Minikit Neo. This little guy goes to deep sleep and wakes up when the door opens or closes and I customized it with a greeting and signing off greeting which greets my 4 yr old when we get in the truck. She loves it lol.
Click to expand...
Click to collapse
The Parrot Minikit Neo looks very nice. I wish it had an FM tuner though. I know it's not the best way to stream music but it's the only way to do it on my car stereo.

The Arkon Slim-Grip Ultra looks awesome, to bad I can't buy it yet in europe, will wait a couple of weeks and hope that it pops up.

silent assassin said:
The Arkon Slim-Grip Ultra looks awesome, to bad I can't buy it yet in europe, will wait a couple of weeks and hope that it pops up.
Click to expand...
Click to collapse
The CD one looks nice as well, too many options not sure what should i do LOL xD