Related
I haven't gotten my device yet (in the mail), but I've heard there is a BT headset bug which causes the person on the other line to have difficulty hearing you.
Is this true? Is there any fix?
i havent recieved my phone either yet but havent heard anything about the bluetooth but if your interested in a awesome bluetooth def look at a jawbone the jawbone i have is freakin amazing lol
I have a mogul and a tytn and a jawbone.
I have seen other posts (hofo, ppcgeeks, etc) that say there are major problems with bluetooth but I have yet to see them. I did use the bt fixes that I applied to my tytn to the mogul and have not had any problems. Jawbone picks up the request just fine.
Brad
There is a 5 pg thread over on ppcgeeks where people have been sounding off, but it doesn't look like there is a fix. I personally have a Motorola HS820 which has worked fine with my old CDMA 6600 that apparently sounds terrible on the other end.
Doesn't look like the ROM upgrade addressed the BT issues either...
The Jawbone sucks. Total waste of money. Overactive DSP and the worst wind noise of any BT headset. BT might be fixed in a future ROM update.
from what i've heard, the new sprint rom 2.09.xxx fixes the BT issues. I haven't gotten around to pairing my headset with it since the rom update, but I will at some point or another and let u know if it has made any difference.
I can only speak for my experience.
I am using the 2.0.9651.3 ROM on the mogul with the same BT fixes that I have used on my Tytn since they were made available ( BT Voice Command Fix from XCSdM and reg tweaks) and am not having any of the issues mentioned in the thread at ppcgeeks. My phone also came with that ROM from Sprint.
I have also used about 12 different BT headsets from Nokia, Jabra, Motorola, and others and the Jawbone has been the best so far at reducing outside noise/interferance.
Again, just my experience.
Very glad to hear that Park City!
ViPaDawG said:
from what i've heard, the new sprint rom 2.09.xxx fixes the BT issues. I haven't gotten around to pairing my headset with it since the rom update, but I will at some point or another and let u know if it has made any difference.
Click to expand...
Click to collapse
You heard wrong. The ROM update does nothing except add Sprint's Music Store.
BT issues post-ROM update
I may be the unlucky one here, with a different story, but no one complained about my BT conversations prior to the update. Now, I've been told that my headset was "cutting out" today, so I had to hang up and turn off blue tooth to finish my conversation. May be coincidence that I didn't have problems before as the device is only two weeks old to me, but the ROM update definitely did not address BT as far as I can see. This BT reminds me of my Treo 700p....
Park City said:
I can only speak for my experience.
I am using the 2.0.9651.3 ROM on the mogul with the same BT fixes that I have used on my Tytn since they were made available ( BT Voice Command Fix from XCSdM and reg tweaks) and am not having any of the issues mentioned in the thread at ppcgeeks. My phone also came with that ROM from Sprint.
I have also used about 12 different BT headsets from Nokia, Jabra, Motorola, and others and the Jawbone has been the best so far at reducing outside noise/interferance.
Again, just my experience.
Click to expand...
Click to collapse
hi,
I'm new to the bt bug. where can I can find these fixes and reg tweaks. I am having the problem with perple not hearing me and I need to get it corrected.
thanks
billf.
fergusonwilliam said:
hi,
I'm new to the bt bug. where can I can find these fixes and reg tweaks. I am having the problem with perple not hearing me and I need to get it corrected.
thanks
billf.
Click to expand...
Click to collapse
The only fix is to get a different phone with BT that works.
had the phone a couple of days now... BT has been alright for me, although I don't use it for more than a few minutes of talking at a time!
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its speaker works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
CJSnet said:
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its output works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
Click to expand...
Click to collapse
I do have exactly the same problem. After flashing XDA Mobile 6 Release 3, microphone has worked for couple of days, and then suddenly died. Interesting, microphone is working with Notes but not with phone. I went back to
XDA Mobile 6 Release 2 for some other reasons (read: 2MB more free memory for critical application) but the problem with Bluetooth microphone remains. Radio is 2.25. Any advice?
--
Pogo
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is sometimes temporarily resolved for a short time. It always comes back though
I have been asked to join this thread. Per a PM:
We love the ROM you have provided, and are very thankful, however it was not until installing it that this issue arose. It does not seem fair to leave a number of people with a phone that is unusable for 'phone calls'.
Click to expand...
Click to collapse
(Bolding added by me)
I don't know what to tell you. If the rom doesn't work for you, then don't use it... Don't tell me its "not fair". I use MS Voice Command, and XM6r3 and have never seen this issue with my Bluetooth headset (Jawbone). I've also tested this out with a Plantronics Explorer 210 headset that I have and it has not problems with XM6r3 either. My A2DP headset (Spider) also works fine on XM6r3 with MS VC. I've stated this in the past when people have said they have BT issues on my rom. Sorry, but I can't reproduce it, so its hard for me to fix something that isn't broken for me.
Try this... Do a hardreset on your device (take a backup first if you want), then leave it as the base rom with NOTHING extra added. Run that way for a few days (how ever long it has taken before) and see if the problem happens again. If it doesn't then its not my rom but something being added to it (probably screwing with the registry someplace). If it does happen, then as I've stated before, I've seen a number of BT devices be flakey on WM6 (especially car kits). Try a different rom then. If someone with the problem can pin it down, I'll be happy to do what it takes to fix this issue if its something in the rom that is causing it.
Thanks mfrazz. What wasn't fair was not the bug, but that you had not responded to previous mentions of it, i.e. not fair to leave us with it. We love the ROM and put a lot of our life in your hands in a way, as we rely on our device so much for work and play. Hope you understand.
Now then, I have already tried a hard reset and the problem never occurs, until WM6 is put back on. Sure, 'use another ROM' is all very well, but we love yours - again, hope you appreciate the sentiment. If you're in a relationship, are you the kind of guy who tells a girl who loves you, 'find another boyfriend', or do you try to make it work
SO, I am wondering if this is related to the glitch you mention where sometimes when switching out of vibrate mode, the ring tone becomes muted. For that, your solution is to play the ringtone again, then it becomes unmuted.
Similarly, our Bluetooth devices mic's are being muted, and if we mute then unmute them again, then they become unmuted. A link that helps point you in the right direction?
Please note, this is not certain bluetooth devices being 'flaky', this is ALL devices. 4 at the latest count, including rock solid Nokia CARK7W car kits and Jabra headsets.
Some people put it down to MS Voice Command, which I have never installed. What does that program do, do you know, to cause the bug? Again I hope that might help point you in the right direction.
Please don't dump us Let's try to fix what is wrong in this relationship
BT problem solved?
CJSnet - not sure if you have resolved this. I was having the same problem and noticed people with reTouched dialer were not, so I loaded that dialer and the problems went away. I am using a Plantronics Voyager 510. Seems the problem might be with the standard dialer.
Hope this helps
CJSnet said:
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is temporarily resolved for a short time. It always comes back though
Click to expand...
Click to collapse
Thanks, I'll give that a try. However WM6 has pretty much finished the Wizard for me, and I'm hoping to get a TyTN II soon as a replacement. Shame.
We just bought an '08 Altima with the bluetooth option. I can pair the XV6800 with no problem, but quality sucks. It is super choppy on my end and the person on the other end can't hear me at all. I tried my wifes XV6800, same thing. I can pair my old E815 and it works perfectly, so it's not the car. I tried a hard reset, no difference.
I tried loading dcd's clean rom 1.6.7, no difference. Is the BT stack upgraded in this rom?
Is there a newer BT stack out there that I could try?
Its worth downloading and trying the Jetware BT Extensions and see if that helps....but usually it does not change quality so much as enable functionality.
http://www.jetwaremobile.com/
Brad
Thanks for the suggestion, but it didn't help.
Developer help with Infiniti/Nissan Bluetooth?
I've got the exact same issue with an '07 Infiniti G35 w/navigation. I've been doing lots of reading on the xv6800's bluetooth, have tried DCD's and Custel's roms, and was just about to start my own thread, but I'll bet our cars are the same bluetooth/rom wise.
Jetware didn't help me either.
Here's the best fix I've found and it works for me consistently.
-Whence the option's available depending on whether you're dialing out or receiving, click the "use handset" button (transfers call to the xv6800).
-Shortly after press the "phone" button (transfers call back through car).
-Should work as expected after that.
Anyway, at this point I'm hoping one of the kind devs on this forum (DCD or Custel to name just two of many) might find a sec to help us out, although I'm aware and appreciate the fact that many other users are keeping them very busy on their own projects.
I'm assuming the xv6800's hardware would be most similar to other HTC pda phones (not sure what happens between GSM and CDMA devices), so here's a list of their phones who's bluetooth does work with my car (from here). It supports the bluetooth in 144 phones total.
Kaiser (wasn't working with stock rom, but works after this patch from HTC)
Hermes
Atlas
Wizard
Apache
Magician
Harrier
HTC pda phones that don't work with my car (at least not 100%).
Vogue
Elf
Titan
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
In addition to the stock Verizon rom I've tried DCD's 1.6.1, 1.6.7, and Custel's 1.1 with no change in the symptoms.
It's my understanding the dev community thinks modding the Vogue's bluetooth for the Titan shows the most promise. I found this thread mentioning an alternative, but it seems to have gone stale on another forum. I'd prefer not to use that forum.
I understand the Vogue's bluetooth might show the most promise for general bluetooth applications (which would satisfy the most users), but becuase I plan to use bluetooth solely through this car, does anyone know if I might be able to go an easier route given the information I've provided?
I'm using radio 1.40.00, could 1.47.01 make a difference?
Can anything be learned through HTC's Kaiser update patch?
Are there any bluetooth alternatives being tested that I haven't found?
Thanks for any help anyone can provide.
OK. I tried what you said and confirm the same results on the '08 Altima. If I switch to handset and back to Bluetooth, the sound is clear (weird). The only problem is, I can't switch until a call is in progress. This is a work around, but not a good one. We need a BT stack that fixes this. Or maybe firmware upgrade from the auto manufacturer.
I know this is going to sounds like a cheap shot, but it sounds to me like something needs to be fixed on Nissan's side. I've tried mine in an Accura without any problem, however both of your stereos are manufactured by Nissan.
A word of advice: I always found that auto makers should stick to what they do- namely, make cars. If Nissan were so great at BT stereos, you'd see nissan headsets.
I never bother with factory Bluetooth anymore- I swapped my stereo right away for a decent Sony Xplod system that supports A2DP (wireless stereo) as well as phone calls. The aftermarket stereo not only sounds great, but I play all my music from my phone without taking it out of my pocket. Last I checked, no stock car stereos supported this. Sony is good at stereo and bluetooth (been around the block a few times).
Complain to Nissan. Or swap your stereo for something decent.
My Sprint 6700 with BigJ Rom works great with the 08 Altima. In the fact the audio quality is better than the Sanyo Katana that I also have paired. I am dispointed that I cannt answer calls from both phones on the car headset without first selecting the phone that has an incoming call. Even my At&T home phone with bluetooth can do that although it does require you to select a cellphone for outgoing calls.
I was able to upload a contact entry from my 6700 to the car Download phonebook. However, I can not get that into the more usable phonebook directory. Anyone succeed in doing that?
shannl said:
My Sprint 6700 with BigJ Rom works great with the 08 Altima.
Click to expand...
Click to collapse
You might be in the wrong forum. The Titan is a 6800, not a 6700.
yes, but this thread is discussing the Altima BT stereo. Truthfully, this whole thread should go in a more general BT forum, since I don't think it pertains to the 6800 exactly.
08 altima bluetooth
Just wanted to say thanks to Park City for posting the name of the web site with the bluetooth extentions (jetwaremobile.com). I have just recently purchased an 08 Altima with the Nav system and bluetooth. I have an Tmobile MDA with a cooked ROM running WM6 and I could not get the entire outlook phone book to download to the car. Once I installed the jetware mobile extentions everything worked just fine. I even got some additional functionality I was not expecting like signal strengh and battery status on the nav srceen. As for voice quality, it's never been an issue for me. So far anyway
As I can see, they are currently testing the Mogul with both of your cars. I don't know what they mean by 'testing', but that's what is going on right now.
http://www.nissanusa.com/bluetooth/...gation+System&mfg=All+Manufacturers&x=51&y=16
http://www.infiniti.com/bluetooth/t...igation+System&mfg=All+Manufacturers&x=42&y=9
arcanecho said:
As I can see, they are currently testing the Mogul with both of your cars.
Click to expand...
Click to collapse
I saw that too, but I don't have a lot of confidence they'll be releasing a bluetooth update any time soon. That's why I was hoping the Titan's bluetooth hardware might be similar enough to the hardware in one of the devices that DO work with our cars (Kaiser, etc., list in my earlier post) that their bluetooth software could be ported "easily" to the Titan. I'm sure the devs here are trying to get the Titan's bluetooth to work as well as possible for everyone's devices, which makes sense. However, with California's new "handsfree driving" law starting July '08, I'm only concerned with getting the Titan to work with my car.
Apparently no one's too sure if that's possible.
1. have any of you verified first hand that the kaiser does in fact work?
2. could someone research and identify the bt hardware in the kaiser, and the titan?
3. has anyone run the kaiser bt fix on their titan and tried it?
i suppose i never thought to look at the kaiser's bt. mine still functions after applying that kaiser patch..
the kaiser patch is a replacement TIInit_4_2_38.bts file
this file did not exist in any titan roms prior to 2.16
2.16 introduced this file (i compared md5 and its not the same data)
2.17, htcs supposed 'fix', does NOT contain this file
all vogue roms i have seen DO contain this file, but again its different data
maybe you guys are on to something
i will throw something together tomorrow probably...drinking time.
dcd, thanks for the help, enjoy those drinks!
1. Not first hand, I'm going off this post. That thread's also why I believe the Kaiser wasn't working with the car before the patch.
2. I've spent a lot of time trying, but have come up empty on any detailed hardware specs.
3. I just ran the Kaiser patch and the bluetooth functions the same as it does without the patch.
I'm using a rom from your 1.6.7 kitchen with nothing else added (rom's working great, btw). I had the same issue with the stock Verizon rom.
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
FZ1 said:
this post
Click to expand...
Click to collapse
good enough for me
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
Click to expand...
Click to collapse
maybe...i dont know how the file functions and ties into the others yet
FZ1 said:
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
Click to expand...
Click to collapse
i take it they are completely different head units?
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it. I have been just using my Platronics Discover 640 for the BT these days... It'd be nice if someone can come up with a solution for this...
dcd1182 said:
i take it they are completely different head units?
Click to expand...
Click to collapse
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
riDuh7 said:
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it.
Click to expand...
Click to collapse
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
Click to expand...
Click to collapse
Once connected, I get a really static noise from my end while in the conversation. Of course, it'a really not usable at all....
I'm going to try the reconnecting method that was mentioned above today. I'll come back and report the outcome. And thanks for the help BTW.
EDIT: BTW, my Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to
Click to expand...
Click to collapse
whoa, someone hook me up with a G35 to uh, test
Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
Click to expand...
Click to collapse
well, peices of it maybe. i would blindly guess that the kaiser is closer to titan than hermes, but we need to exactly identify the bt chip in each. plus its still shady then, ie the kaiser has tnetw1251 for wlan same as the titan and I cannot get their newer wlan driver to work on my device.
what we really need to look at is previous bt stack modifications for other devices. i need a better understanding of tiinit_blah. I've also noticed that the devices that work have a more extensive, or a 2nd audiopara file that sets values for some bt devices. to be completely honest right now i dont know what im looking at and i need to figure out how it all fits together before i know where to start.
Well, I tried reconnect method from both phone and the car, but neither did anything at all. The quality is still crappy as heck. Man... I reallly wish this works.
EDIT: Actually my side of the speaker was complete static, and the other side could not hear what I was saying AT ALL. This efing blows.
I just recently acquired a stereo bluetooth headset from dell model number BH200 and so far the stereo music quality is superb, but the moment a call comes in or I pick up a call it immediately disconnects itself. My question would be if any of you guys have any experience with this issue. the Stereo bluetooth and handsfree profile are both set to active. Any suggestions or hints?
I'm going to go on a limb here and assume that you guys haven't had access to the aforementioned bluetooth and i'm short out of luck here... right?
p.s. SAY IT AINT SO!!!!
Hi, I also have the same headphones and the same problem - only on HTC Universal flashed with WM6.
I search a bit on Google and it seems that the problem is with MS Bluetooth stack - it was working correctly for WM5 (but no A2DP), now in WM6 A2DP works, but handsfree does not.
Right now I'm testing alternative BT stacks - started with UniBT (it's Broadcomm stack modified for Universal) - now A2DP works flawlessly (before that, it didn't), but handsfree/headphones mode does not. At least trying to receive the phone call doesn't turn the headphones off.
i tested my fuze with a jabra bt2010 and it works fine. I'd prefer to not carry 2 bluetooth devices so i'm trying to find a way for it to work. I've been suggested to use a widcomm bluetooth stack as well but i dont know how to change my stack. If anyone here does know how to do it, please do enlighten us.
It's been nearly a month so I'm going to bump this thread in hopes of someone might possibly have some insight into this.
Push/bump.
I got the S9 now, it works for both functions but craps out completely when i'm outside, really bad signal reception as well as "muffled sounds" according to my audiophilic and audiophobic friends.
I think it has to be something to do with the actual firmware inside the bh200 that is wreaking some unknown havoc.
Dell bluetooth headset BH200 not working with Sony Xperia X1i
I have a Dell Bluetooth headset model BH200 and in A2DP mode, works flawless but the moment it is used with handsfree mode for call, the connection is broken and the headset switches off itself. This headset works very well with other non WM6.1 devices. Any clues with anony one what should be done in this case, some people have suggested JETware Hands-free Extension , any one tried on this.
I actually gave up on the bh200 and got myself a jabra bt8010. it works like a charm and the sound is just as good as the bh200
Indeed... i used to have a WM device (Mio A501) and I had the WM6.1 Pro..
I bought this BT at that time and it didn't work on WM6.1 (it even didn't asked me the PIN to pair it) but, when I tried with WM5.0, everything worked great, great sound on call's music, etc.. now I have a Sapphire and I'm not able to make calls on it (music works), but since I'm not driving and people used to look like "what a crazy guy speaking in English alone, no cables, it must be a mp3 or something.. hmmm" when I was on a call, it doesn't make a huge difference
i have yet to try this on wm6.5 but I highly doubt there would be a change..i'll give an update when I do charge up the bh200
i charged the bh200 up completely and tested it out.. it was a failure.. looks like 6.5 did not do anything to help...
Maybe windows mobile 7 will work.......... maybe.
You can use BH200 on call by this way only(I tested)
1. Turn on BT
2. Accepted call(However just Turn on your BT after accept call is OK)
3. Turn on BH200
4. Pair ur PDA w/ BH200
5. Done
IS this thead still active? I have a solution
Guys..
Use Reg edit and make the following modifications in your WM device by creating a new DWORD value 0 with the parameter UseESCO. Check out the path
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0 (Dont use space between UseESCO)
Then restart the phone and delete any previous BT devices on your phone, start up the paining process and get it to work.
worked flawlessly on my Dell BH200
Thanks,
Raj.
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
mputtr said:
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
Click to expand...
Click to collapse
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
sweet! thanks a bunch man!
prudviraj said:
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
Click to expand...
Click to collapse
Heya, Finally got back ot he US and tested out the BH200 with the fix you mentioned. it works!!!!!
although, i'm wondering if you're having problems with the bh200 not wanting to connect to the phone automatically.
Need help for the same problem in android
I am having similar issues on my Nexus one. Dell BH200 works for music playback but stops functioning when a call is made or received. Even the connection between the phone & BH200 gets lost.
I would be really glad to get some help on this.
I just switched from a moment to the hero on our third line that our friend uses.
Had many problems with the moment. So far only one with the hero, but its a huge deal to the end user!
Sound quality when using bluetooth is from poor to bad. Caller on other end either cannt hear me or I cannt hear them. So far this is true with all 4 of my bluetooth headsets. These same headsets work with no problem on diffrent phones. So its not the headset.
Is there a known bluetooth issue on the hero? I searched the forums but cannt find anything. I know this could be a simply a bad refurb problem. However if there is a custom rom or some other way to fix this problem I would like to try that before switching phones.
If a bunch of you tell me you use bluetooth with a stock hero, without problem, then I will just call sprint and have them send out a different one. If not though I need a rom / kernel recommendation. Keep in mind this is my friends phone and he does have the time for me to be messing with it a lot. So I need something proven to be stable and low maintenance please.
Does anyone use bluetooth with the hero?
Comon. I know some of you do. Just need to know if it works well for you or sound bad. Please.
Sent from my SPH-D700 using Tapatalk
I have tried over and over to get the hero/bluetooth to work with my car to no avail. It will work sometimes, but most of the time not. Strange things will happen like I can get phone calls and I can hear the other person, but they can't hear me AND after disconnecting bluetooth, then the speaker phone doesn't work until I turn off the phone and remove the battery. And there's been some times I've had to do that multiple times to get the speaker phone working again.
My crackberry from work has functioned flawlessly with my car and with headsets.
Mine works fine/sounds fine.
Setup:
Hero running CM6 Stable w/BlackMod connected to 2008 Ford Fusion Sync system over BT.
I have not bothered to get a BT headset because so many had issues with it in the past.
May have to try a custom rom. Trying to avoid that cause it not my phone but..
Thx for the replys!
I use blu ant and ive had 3 diffrent heros and the blu tooth always works fine and just a note just because ur blu tooths works with your other phones doesn't mean the will with all phones i cant really explain y its just some things are not compatible doesnt mean your phone is bad or the head set its just some devices just wont shake hands good luck
Root-Hack-Mod-Always™
Never had a quality issue... But I do have a loudness issue. No matter what I do I can't get the volume on my end to be loud enough. Tried it with my dads moment and volume is great. Dunno seems like the hero has mixed bluetooth feelings.
Sent from my HTC Hero using the XDA App