Is the original WM 6.0 ROM for the vzw xv6800 up on the vzw or htc site?
(I'm paranoid so I really would like to download it from one of those two sites.)
Or are there tools that will allow me to copy the ROM out to later restore?
I ask because I'm about to upgrade to WM 6.1 and I want a rollback option before I take the plunge. Basically, I would hate to find out that after the upgrade one or more apps I have working on 6.0, stop working on 6.1. I would, specifically, hate to loose ability to make free international calls with Skype. (Has anybody got Skype working on 6.1?)
I don't think there is an easy way back as the 6.1 ROM also has a new Radio ROM and PRI version. You would have to contact VZW to get the 6.0 ROM but there is an unofficial one in the Wiki for the Titan. You would need to follow the process for taking your phone back to stock or 6.0 and see if it works or not. I would call VZW and see how they would advise on how to do this as well. Using both 6.0 and 6.1 I personally have not found any issues with any of my apps but there were a few that others did. You might check the build version in DCD's custom ROMs and see when his went to 6.1 and if people had any issues with any third party apps.
I'm going to give this a try anyway. After upgradeing to 6.1 from verizons link the bluetooth in my xv6800 wouldn't sync my contact listing with my 2007 mercedes e350 anylonger (it worked great when I was running the orig ROM with 6.0). And verizon support says I'm stuck at 6.1 whether I like it or not. UTC said the same.
So, my options are to either
A) upgrade my Benz to an 09 model that can handle this new bluetooth obx profile stuff so I can resync my contact list to my car. lol
B) pay for a new phone for $400 (yes, i'm so lazy I'd pay $400 just to get my contact list in my car back)
C) attempt to revert back to windows mobile 6.0
if I brick it or can't make any progress I go back to Verizon and show them I bricked my phone trying to upgrade and see what they say.
So, with that said, here is my plan. Someone correct me if I'm way off here or saying something you know or suspect will not work
http://wiki.xda-developers.com/index.php?pagename=TitanStockHome
WILL THOSE INSTRUCTIONS NOT WORK? It says in section II, step 7...
"Press the CAMERA-POWER-RESET buttons at the same time in order to enter the bootloader. You should see a screen that says SPL-2.07.0000. If you see this text, your SPL has been sucessfully updated. If you do not, power of your phone and start over from step 1. To return back to your phone, press the RESET button. "
well, I'm at 2.07.0000 right now so I should be good to proceed with the remaining instructions, correct?
OR... do I need to go thru the hassle of first moving up to 2.40 bootloader... then back down to SPL 2.07.0000 and THEN I proceed after section II step 7?
wish me luck.
Thanks,
Ben
Yep! It worked. I'm back at 6.0 now.
Just booted for the first time and it self installed all those first time CABs.
Now I'm restoring from an spb backup that I had made just prior to my upgrade to 6.1 and I should be back in business.
Ben
*edit: and my bluetooth in my phone is fully integrated and working my my mercedes once again... yay! 6.1 was pretty cool other than that one issue I was having. I wouldve left it at 6.1 otherwise. But its good to know you can go back if you really wanted too.
Thanks for blazing the trail, Ben. Skype stopped working for me (both the beta and the latest version). Looks like I'll be heading back to 6.0.
send me a message if you have any questions during your rollback. It is very simple to rollback to 6.0 from the verizon 6.1 ROM update.
Here is what I did:
I bought a 1 gig micro card and card reader and formated it to FAT32 from my laptop... format ?: /FS:FAT32 /A:1024
*where ? was the drive letter of my card
Then I downloaded the verizon stock ROM ruu_signed.nbh file and copied it to the root directory of the card... renamed it TITAIMG.nbh.
*edit: i used the stock verizon ROM from the wiki Titan Stock link... Verizon themselves do not have a 6.0 ROM, hard to imagine but thats what their support people said. Or maybe they think we, their customers, are too dimwitted to do anything with it.
plugged the card into the phone and then I pressed the POWER + CAMERA + SOFTRESET buttons (to enter into bootloader) and watched it do its stuff.
Then I had to call verizon support (from a different phone of course) after getting back into Windows 6.0 and they had me reprogram my phone by calling *228 and select option #1... then the support person gave me a new authentication number and they had to re-setup my ip address settings from their end.
WHen that was done and I confirmed I could make and receive calls and had data connection, I then restored my applications and contact info etc from a backup I took prior to upgrading to 6.1.
Then I was back to exactly how I was prior to upgrading to 6.1
The verizon guy was impressed. They hadn't heard of anyone being able to go back after upgrading to 6.1. Without the wiki links from this forum I wouldn't have been able to do it.
Thanks,
Ben
It really sux that vzw doesn't have a rollback for this. Not only does skype not work on this phone but I can't get my bluetooth GPS to work either. (yeah, I upgraded to 6.1 so I could use the built in aGPS but it does not look like aGPS works with mgmaps.) I'll be buying a 1GB microSD come Monday.
Thanks again, Ben.
well, I get to do this again. Yay!
I dropped my phone onto the cement sidewalk while I taking out the trash and damaged it pretty good.
Asurion (the insurance company I have my plan with) just shipped me overnight a new (refurbashed?) phone with the 6.1 already loaded. And yep, the OBEX bluetooth handsfree profile won't work with my car. The phonebook doesn't synch with my car. So I'm rolling back this one to 6.0 too.
Too bad really. I like 6.1. Anyone know if 6.1 is available on a cooked ROM but with the original vzw 6.0 bluetooth obex profiles?
Anyway, here I go again at least I know I can do it and I'm not stuck with 6.1
Ben
When you did the rollback to version 6.0, did it update your PRI back to the 1.35 version as well?
blancmik said:
When you did the rollback to version 6.0, did it update your PRI back to the 1.35 version as well?
Click to expand...
Click to collapse
I don't know what PRI is or to see what version it is. If you tell me where to view that I'll post what I find.
here are some of the #s I do know...
SPL 1.04
R 1.30.60
D 2.09
By the way, the rollback worked on this refurbashed phone that came pree loaded with 6.1... the rollback worked the same as when I rolled back my original phone with the VZW mr1 download. Except this latest time I didn't have to reauthenticate the number. They did have to reset my ip info though but that took only a few minutes.
I don't know why but I find this thread amusing. The 2007 benz os works fine with whatever radio and rom combination I have ever used. Did you try and and do a stock verizon 6.1 update? Let me share something and its not just because I am a tech junkie. I can obviously see that there is fear in updating outside of stock vzn rom, but let me paint a picture for you; DCD'S ROMS ARE FAR MORE STABLE AND PRODUCTIVE THAN ANY CARRIER ROMS. They have less junk that you don't need crash much less and sync with everything seemlesly. A bluetooth receiver for a titan? Come on. Do you know that you have a built in gps one receiver in your titan that with verizon you can have locking in 30 seconds or less every time? It is not hard to update to one of these roms, especially if you have everything backed up. If you pm me I will glide you through the process. It may take you 1-2 hours of your time but you will be so much more satisfied with your titan.
PM sent!
which 6.1 ROM do you recommend?
Thanks,
Ben
Something interesting for those of you who are downgrading...
If you follow the instructions on the Wiki, not only will it revert the phone to true stock condition (rom version, prl, pri, etc) but it will also restore your gpsOne settings.
I had a phone that has the bad pickles on the screen... I was bringing it into the store for a replacement and upgraded to MR1. They were of course out of replacements and shipped a dummy phone and I was in need of GPS (I had issues with the adapter program and iGuidance and MR1) so I reverted back to stock (following the WIKI instructions) and then DCD 3.34. I was having issues with GPS after reverting back and when I checked the gpsOne setting that I had made with the QPST program, my prior changes had been overwritten.
Just an FYI...
yeah, I rolled back from the mr1 using the wiki instructions and it is a pieace of cake.
actually my phone is doing all I need it to do at the moment and I've been exceedingly pleased with it.
guess i'm somewhere between intermediate and advanced. ha.
I may get bored ovr the holidays tho and try out the DCD 3.34 rom.
Sweeny, I sent you a PM... can you confirm the DCD3.34 works with your mercedes 2007 and can synch the contacts? would be good to have confirmation before I spend a few hours only to have to rollback again
thanks
Ben
blancmik said:
...so I reverted back to stock (following the WIKI instructions) and then DCD 3.34. I was having issues with GPS after reverting back and when I checked the gpsOne setting that I had made with the QPST program, my prior changes had been overwritten.
Just an FYI...
Click to expand...
Click to collapse
just to clarify, are you recommending against upgrade to 3.34 then because the gpsone setting gets overwritten?
thanks and I apologize for my newbish questions.
ben
well, I am an "intermediate" afterall. ha. I just read 30+ pages of the 3.3.4 rom and it looks great! but at the same time there are quite a few reports of people having some issues (keyboard, capslock, start menu dissapearing, etc.. that may all be install/user errors or related to version of the taskmanager they have).
But I've decided that since I'm intermediate level and admittidly a little "scared", I'm going to stick with my boring ole stock ROM at least for now.
Thanks for the info though guys.
*EDIT: well, I'm feeling adventurous. ha. I'm going to give the DCD 3.2.6 a shot tomorrow... and considering using radio 3.42.40 (or any reason not to try the 3.42.50?)... and the Nue SPL 2.47. Shoot, if it don't work all I've got to do is downgrade back to the stock vzw 6.0 right? I'm assuming I can still go back to that factory vzw 6.0 rom using the unlocked bootloader or at least using the lock 2.07 bootloader (the stock verizon bootloader is actually 1.04 and their isn't a way to get back to it after upgrading)
Oh, and blancmik... I did finally see where the pri # is in my EPST settings... yes, the rollback did set it back to 1.35_002
Also, thanks to Russ for the PM. appreciate the info.
This thread has shifted slightly off topic and I apologize for that... hopefully though it will give insight to the newbs who didn't like the factory MR1 6.1 UPDATE for whatever reason.
Thanks,
Ben
I've gotten really good at flashing ROMs, SPLs and Radios lately. lol. I've tried the VZW MR1 6.1 ROM... the DCD 3.3.4 and 3.2.6 both using the 3.37.20 radio and nue2.47 SPL. none of these 6.1 ROMs work with mercedes <=2008 model year bluetooth
Mercedes 2007 COMMAND system does not work with the obex bluetooth handsfree profiles in that the contact list from my phone does not synch with the mercedes. Incomming and outgoing calls work fine if I don't mind typeing them uing the dashboards keypad... but that defeats the purpose of the "hands free" profile.
With the good ole 6.0 factory rom and radio I'm able to use my steering wheel control buttons to scroll thru my address book, place/receive calls, adjust volume, speak thru the built in mic on the rearview mirror, and listen using the stereo system. Its one of my favorite features on the car and sucks that MERCEDES has not updated their firmware to handle 6.1 bluetooth profiles.
So I've once again, for the 3rd time, rolled back to vzw's original 6.0 ROM, RADIO and SPL (and pri too). I think I'll try some custom windows 6.0 ROMs sometime later but what I've got now works good for me (no GPS but I don't need it I guess)
THanks,
Ben
Related
Hi,
For warranty issues i have to send the pocket pc phone in for a replacement, but i have upgraded to T-Mobile 4.01 with the new radio Stack.
I can downgrade the OS to original 3.18 but the radio is not downgrading - can anyone please help and post instructions on downgrading to the original Radio...would greatly appreciate.
thanx
As far as i have read (and I've read several posts) there is no way to go back to a previous RS version.
If it is a hardware fault on the phone and is under warranty and not due to misuse like dropping it or breaking screen etc, I cant see that they would bother checking the radio version, probably just chuck in a box with a bunch of others.
Yeah... I've had to return a couple of them. I've always flashed them back to the old rom, but not the radio stack. I've never had any comments on it from TMObile.
I may have been wrong, I have heard that its possible to downgrade the same way you upgrade. Copy the original RUU files into the windows dir and run them. I hear that this might bring it back to it's original radio.
If you try and it works let us know, this is something that is discussed often but never really answered.
I returned a phone cause i dropped it and cracked the screen. I put the original rom back, but left the radio stack. they never mentioned anything.
But, my current problem could be due to the radio stack, cause the new phone i got often times turns off (soft reset). I don't want to call in a warranty issue until i can either put back the old RS or until t-mo officially releases the new one. So... if you find a way to do it, please, please let us know.
I tried the method ntwebguy mentioned, but with no luck, but i don't remember exactly how it failed... I think it just said a newer version already existed on the phone.
I assume there must be a way to do it for the sake of testing if nothing else, but I have not seen anyone that was able to.
John
john - it's most likely hardware, i've had 4 different XDA's from Tmobile and they all did the same thing. i'm in the same boat as you with 4.01 and 6.24 installed waiting for the official release to send this one back in.
that being said, i have an idea - too risky for me though
what if you "upgraded" to ATT or O2's radio stack and then "upgraded" back to Tmobile 6.18?
On T-Mobile web site I noticed information about "How do I perform a device software upgrade?"
http://support.t-mobile.com/knowbase/root/public/tm52082.htm#top.
it refers to
"How do I determine what software version I have? (T-Mobile Wing™)"
http://support.t-mobile.com/knowbase/root/public/tm52081.htm?
which states that "The new software version is 4.26.531".
But new software in not available yet http://www.t-mobile.com/wmupgrade/
maybe when WM6.1 comes out?
wyldstallyns2589 said:
maybe when WM6.1 comes out?
Click to expand...
Click to collapse
It's very very unlikely that T_Mobile is going to release WM 6.1, but even if it's just WM6 it's still a much awaited update since it's the only one WIng users have gotten!
Oh by the way, i really hope too that it's WM 6.1, since ATT released it for their phones(Tilt).
according to microsoft, WM6.1 doesn't even exist. i contacted customer service asking when it was coming out because the internet isn't helping and after about 5 minutes of looking, the guy said WM6.1 doesn't exist and to talk to HTC about windows mobile updates . . .
The Wing ROM update 4.26.531 is available!
I too was frustrated with T-Mobile's website that was missing a link to the download for the new ROM for the Wing. My wife has a Shadow that is also made by HTC. I downloaded a ROM update for her phone and I copied the URL and changed the last part from shadow to wing. Amazingly, the link worked. Yesterday I was on the phone with tier-3 support from T-Mobile and they escalated the issue to the web development team. We didn't expect an immediate resolution due to the holiday.
So here is the valid link to download the T-Mobile Wing ROM update that http://support.t-mobile.com/knowbase/root/public/tm52082.htm#top says is available.
The ROM update is at: http://member.htc.com/RuuDownload/T-mobileUS/DeviceDownloads.aspx?pid=wing
Happy Updating your ROM! I am so glad this worked.
ToddWM6 said:
I too was frustrated with T-Mobile's website that was missing a link to the download for the new ROM for the Wing. My wife has a Shadow that is also made by HTC. I downloaded a ROM update for her phone and I copied the URL and changed the last part from shadow to wing. Amazingly, the link worked. Yesterday I was on the phone with tier-3 support from T-Mobile and they escalated the issue to the web development team. We didn't expect an immediate resolution due to the holiday.
So here is the valid link to download the T-Mobile Wing ROM update that http://support.t-mobile.com/knowbase/root/public/tm52082.htm#top says is available.
The ROM update is at: http://member.htc.com/RuuDownload/T-mobileUS/DeviceDownloads.aspx?pid=wing
Happy Updating your ROM! I am so glad this worked.
Click to expand...
Click to collapse
Any idea what is changed / new in this update?
has anyone tried this yet?
I'm updating my backups and getting ready to try this. I'll let you know how it goes ,and in a few days to let you know how it works in my machine.
can you post anything you notice right away? i'm hoping this is 6.1, what else would it be?
I have a T-Mobile Wing USA.
I am flashing it right now:
1. I extracted the RUU_signed.nbh and flashing via MMC.
2. It scans 2 OS's from the nbh.
3. Reading second OS from SD!
4. Flashing second phase OS
5. Success, Press any key.
6. T-Mobile Splash
7. Original Windows 2nd splash (no indication of version)
8. Typical alignment screen
9. Stylus tutorial screen
10. Password screen
11. complete screen
12. Customization tool
13. 3-5 minute wait then reset
14. T-Mobile start up jingle
15. Installing MyMobiler for initial browsing of the phone now.
Follow up with pics in a little bit.
Pictures are now added. As stated by the next OP the ROM is much more efficient/faster than original stock. But it is WM6. No need to downgrade if you are using custom a custom rom with 6.1.
To upgrade/downgrade with HardSPL use winrar to remove the "RUU_signed.nbh" from exe. Rename to heraimg.nbh put on the root of MMC and install.
Note: I already have went back to "Just2Clean Wing - zcink Edition". I won't be able to answer any questions. I have to have threaded sms and a lightweight ROM.
It's still WM6. There's 17.5mb or ram available without any mods, and it seems to run a little faster, but it's still the same rom. It's version 4.26.531.1. Basically, tmo doesn't care what we want. If you want 6.1, buy a new phone or make your own.
I can't uprom
I did HardSPL so that I could uprom.
But I can't uprom that is from T-mobile website.
How do I have to do ?
If you have a HardSPL'd Herald/Wing/Atlas, use 7zip or WinRAR to extract the contents of the file. Delete the SPL.nbh file. Flash.
I tried it, but I'm disappointed with it... It's just more useless old junk... at most, it might be a good starting point for a ROM base.
well i updated, wing seems SLOWER!!! well after a few resets it's about the same, overclocking to 247.
2 things i've noticed, if you are in the text message program, with all your messages, and you receive a new one, the pop up still comes up, i find that very annoying. also, you now have MMS options in the menu option in the text message area.
the COMManager looks "cleaner" and smaller as well
I didn't install anything but MyMobiler and the ROM seemed fast. No overclocking either. But again I won't live with out threaded sms.
I noticed that the radio rom is upgraded to 03.21.90. Does anyone notice any difference with the new radio rom or is it basically the same as 03.07.90 that came with my device.
what are you using for threaded SMS?
So far I don't see any major differences. It seemed a little faster, but it still benchmarks the same. The only minor diff was more available ram before modding, but once I cleaned out the startup folder I had 26mb just like before. I'll see if the radio makes any diff at work Tuesday.
Happy Memorial Day!
Well it's been 16 hours since my last soft reset and it's still got 23mb of ram available. That's practically unheard of on a stock rom. I still need to cook my own to get rid of this MyFavs crap, but this seems like a good starting point...
Good morning Everyone,
I was looking into information on updating my Cell phone ROM as after some reading and searching I found out that this phone is GPS capable (Why they would sell it with the functionality disabled is beyond me.) On the Official HTC website I did find a new update that was released 08/06/2008 at the following link. CLICKY! . I am wounder if anyone else is having a problem downloading this file and installing it? I receive an error saying the file is corrupt and I should download the file again. I have tried downloading the file from two separate computers, tried all three mirror sites (US, Europe, Asia) and last but not least tried using three different web browsers. Firefox, Internet Explorer, and Safari for Windows.
I am curious if anyone knows of another mirror site for this newly released update that is working? Or of another way I can update to the same version. I am unfamiliar with the ROMs that are on this website (I could figure it out but am uneasy about installing something unofficial.) Any help would be greatly appreciated.
PS: I also noticed that the file name "-HTC P4000 (Telus)-Telus_HTC_P4000_WM6_07252007.exe" Has an old date on it? I am hoping they just rebuilt a previous update, or they have not actually posted the new update and still have an old one which happens to not work. Just an observation I noticed.
PSS: I have sent in a technical help request through the online process of HTC asking for a link to a working .exe but I tend to find that out of the norm requests such as this do not turn out very well with corporations whose support team are really only knowledgeable in standard help desk things IE: I'm too stupid to turn on my phone can you help me?
Did you follow the instructions here?
http://www.telusmobility.com/on/business_solutions/htc_p4000_upgrade_xp.shtml
I did a while back and it worked. If not, just switch to DCD's, it's awesome. Telus's 6.1 ROM doesn't enable your GPS.
Ya that is currently the ROM I am running, Maybe I am just mixed up. I looked at the HTC website for the TELUS rom and noticed the date for release was 08/06/2008 so I was under the assumption they had released an updated ROM that was a newer version then 2.13.661.2 which I am already running. One that would also patch the GPS (just a guess). However, I guess I will look into the DCD roms and see if I can fumble through the guides to get it loaded. Thanks anyways.
telus p4000 rom
I have a P4000 running on DCD 3.2.2 and Radio 3.42.2 gps enabled internet sharing enabled and many other stuff... this is just roocking the place.. Just forgot the official Rom and go for dcd you just have to follow all instructions be aware and youll anjoye all youre gona do with your phone
HTC P4000 rocks again!
Being half way through custom install (with all nightmares and mistakes ) I found this official update too. Confirm too: everything works as expected.
Took a while for GPS to pick up in Richmond Hill, Ontario, but the it worked like a charm!
guig54 said:
I have a P4000 running on DCD 3.2.2 and Radio 3.42.2 gps enabled internet sharing enabled and many other stuff... this is just roocking the place.. Just forgot the official Rom and go for dcd you just have to follow all instructions be aware and youll anjoye all youre gona do with your phone
Click to expand...
Click to collapse
2nd that. Upgraded from the old v2 and now to this one GPS and everything worked great with Google Maps.. I didn't bother stopping that customization thing like I've read in other post. Loaded that HTC home Plugin v2.1 on it and its fine.
Hey folks, here from the Herald forums for a friend of mine. What has happened is this, I went ahead and flashed his phone from the stock WinMo 6.1 to NSFAN's 6.5 version 13. Now before I did this he of course had data capability, but now for the life of me I cant get them working again. I applied the Sprint provisioning cab from the ROM thread, aswell as following the instructions per this thread here(http://forum.xda-developers.com/archive/index.php/t-410357.html), and neither of them work. So my question is this, can either someone point me to a thread with the exact settings or instructions on how to get the data settings for Sprint that will work under WinMo 6.5. Thanks much!
Device-Sprint HTC Touch circa 2008
ROM-NSFAN's custom WM6.5 version 13
HardSPL'd or whatever it is you do to CDMA devices...yeah sorry im used to GSM stuff so I dunno what you all do. But I followed Cokeguy's guide to unlock the CID I believe so I guess thats as close to HardSPL as you get on this thing heh.
And of course application unlocked.
Try not using any provisioning CABs. Just flash the ROM and see if it works from there (works fine for me and I am using a Vogue on Sprint).
Well that was my first thought, and I both hard reset and re-flashed and I still got nothing. However, I went back to the stock Sprint ROM, and then re-flashed and everything is cherry now...I don't really understand why...but it is. Thanks for the reply anyways!
Hey guys, please take no notice of my username, I am NOT a guru! Flashed WP7 to my UK HD2 yesterday. The ROM is incredibly stable and works perfectly in every way except that the phone function is crippled and the OS will not make or receive calls or text messages. I flashed the radio supplied with the package like everyone else, followed the instructions carefully (flashed my WM 6.5 many many times) and have searched the forums before posting. I even tried flashing other compatible Radios. Not quite sure where to go from here as I'm not a dev. Seems like MrMagicMushroom has been having the same kind of problem:
No replies. Can anyone guide me through the safe way to roll back to WM6.5? WP7 works great, wifi included but I think all that flashing disabled the phone function, can't make calls or texts.
I've been through flashing back to a stock ROM and starting over but the phone function is not working at all now. I have a 16GB SanDisk mircoSD card which read perfectly in WP7 even though it showed slightly less memory capacity than WM 6.5 did when I flashed it. Bottom line, I need help!! I read somewhere on the forum my microsd needs reformatting completely. Was this ROM safe for European (specifically UK) HD2 owners? Any ideas/help would be welcome!
N.B: All other OS functions (aside from the aformentioned phone function issue and the expected activation issues) work fine.
Love the work you guys do here btw. Hobbyists like myself really appreciate it.
It seems I have the same problem. My phone has been disabled as I am unable to make calls but everything else works fine. WP7 and back to 6.5 and back again, no phone. It would beep 3 times and hang up when I tried to make a call. Anyone experience this?
GraileR1 said:
It seems I have the same problem. My phone has been disabled as I am unable to make calls but everything else works fine. WP7 and back to 6.5 and back again, no phone. It would beep 3 times and hang up when I tried to make a call. Anyone experience this?
Click to expand...
Click to collapse
Having the exact same problem, beeping 3 times and all. I'm pissed off because everything else is working fine.
I'd try to re-flash the radio with a known working one and then re-installing wm6.5
The version of radio you currently have installed would help as well.
Thanks for the reply rbrookstx, I am running the latest energy rom with a 2.15.50.14 radio. I usually install the radio after the OS but I have nothing to lose so I will give your suggestion a try, thanks again.
rbrookstx said:
I'd try to re-flash the radio with a known working one and then re-installing wm6.5
The version of radio you currently have installed would help as well.
Click to expand...
Click to collapse
I've tried that. I'm still running WP7 on my HD2 but I'm just using it for the novelty as a music player and testing out other functions since I have another phone to use in the meantime. The radio on it at the moment is the one included in the LEO70 WP7 package (Leo 2.15.50.14). I've even tried a T-Mobile specific radio I found (T-Mobile LEORadio_2_10_50_08_2) but I wasn't 100% sure it was compatible for UK or USA T-Mobile users. Either way this is strange since all my flashes have been smooth even though I've had this radio issue before before I sorted it out. I'll try your recommendation.