Related
using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.
pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.
okay thats good
crappy stuff, bricking
itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?
didn't think it was possible to brick a herald. def gonna b more carefull now
yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way
wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone
ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?
itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`
lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer
Click to expand...
Click to collapse
papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer
exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Tell the people around you：Taiwan is a province of China！！！
cheer for you
yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right
Hello anyone,
i just have done some bull****, i guess...
yesterday evening i copyed "EnterBootloader.exe" via USB to my VPA compact 4 & run it from over there. meanwhile this step i was connected to USB (maybe the fault [?])! the SIM-card was inside the device, but no SD-Card.
next a whitescreen popped up and i waited 1.5min... i couldn't wait any longer, so i pressed on-/off-button...
nothing happened if i press the on-/off-button again, nothing happens! no LED is blinking any longer, even i connect it to 230V.
my situatin is really uncomfortable to me - please help me to get back the manufacturers settings!
thx in advise
Beli
why did you copy "EnterBootloader.exe" to your device and run it? What where you trying to do?
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Belisario said:
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Click to expand...
Click to collapse
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
ace10134 said:
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
Click to expand...
Click to collapse
It was not my intention to flash any ROM...
Thanks for the advice, but for now i'm unable to flash any provider ROM, because i don't have any!
...i guess it should be a GERMAN vodafone ROM, because that was the last runnig stable.
now a few questions, which the WIKI was unable to answer:
where to get this unknown ROM?
over here?
how to install (guide/tut would be nice...)?
what about the two different "goldcard"-methods?
Elf-Goldcard
Herald-Goldcard
what about the so-called "Unbricker"?
over here
thewingster.com is the best place. check it out
Brandonii said:
thewingster.com is the best place. check it out
Click to expand...
Click to collapse
Well it's not going to solve his problem.
I wish my website could fix his phone in an instant, but it can't He'll have to do the Goldcard, most likely
So, if the Goldcard is the best solution for my Herald, i have to try it... otherwise there is no way out.
BUT:
The website "hides" a link to the official ROM of T-Mobile Wing (US).
I've modified the link, but i don't know if i'm at the right place over HERE.
Maybe i should try it, but they need the so-called IMEI... i don't want to offer it to them, only if it would solve my problem!
As far as i know, i need to download the official ROM of Vodafone Germany with SPL-version 1.09.
If any of you has this ROM or something that could help my to find it, please post a "hint" for me where to get
Thanks in advance
Beli
well like title says i got a used titan off eBay thinking i could just flash a custom ROM but i was wrong. the phone keeps on restarting itself like a 1min after it boots up. I HAVE TRIED Every THING I KNOW. its back to a stock ROM and re lock and it doing the same thing what else can i do. i did the search thing here but i guess no one has the same issue??? what should i do now???
also once screen goes black it just restarts???
What radio, rom, and bootloader version
Hello all, sir my issue is that my pda stuck on logo htc, just freeze and no more..
Some info about my pda;
P: acaaaam-4070
R: 1.67.00
D: 2.18
Carrier: Movilnet
If someone can help me please..
richiricherd said:
Some info about my pda;
P: acaaaam-4070
R: 1.67.00
D: 2.18
Carrier: Movilnet
If someone can help me please..
Click to expand...
Click to collapse
What version of bootloader?
drewcam888 said:
What radio, rom, and bootloader version
Click to expand...
Click to collapse
radio 3.35.04
rom 335.651.2
spl 2.06.0000
jmoney2001 said:
radio 3.35.04
rom 335.651.2
spl 2.06.0000
Click to expand...
Click to collapse
Who is your carrier?
jmoney2001 said:
radio 3.35.04
rom 335.651.2
spl 2.06.0000
Click to expand...
Click to collapse
Whats the weather like around there?
sprint weather is pretty crappy here
hello...
can someone please help me...btw...this is way offtopic but i got no answer elsewhere...i sold my TyTn 2 weeks ago but i had very beautiful ringtone...it was named "guitar"...i was using wm6.5 from rugal...can someone please upload it??...i would really really appreciate...thx
Why not ask in the tytn II aka kaiser section and not the titan section.
any one with the same problem????
So do you wanna try and put this sprint rom on while in bootloader. ftp://ppcgeeks.com/Titan/CarrierRom....651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe
drewcam888 said:
So do you wanna try and put this sprint rom on while in bootloader. ftp://ppcgeeks.com/Titan/CarrierRom....651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe
Click to expand...
Click to collapse
umm ok did that but still reboots. have relocked it and unlocked it and again locked to 1.06 and installed the rom you gave me what gives???? what else can i do
The rom I gave you should have given you a 2.07 bootloader. If you have a 1.xx bootloader then that is your problem because it was made for pregps roms. And any rom with a radio newer than 3.xx is a gps rom. You need the stock 2.07 bootloader or the unlocked bootloader 2.4 or 2.47
drewcam888 said:
The rom I gave you should have given you a 2.07 bootloader. If you have a 1.xx bootloader then that is your problem because it was made for pregps roms. And any rom with a radio newer than 3.xx is a gps rom. You need the stock 2.07 bootloader or the unlocked bootloader 2.4 or 2.47
Click to expand...
Click to collapse
ok unloced it same issue gt 2.4 on heirwhat else can i do
Ok so now what are the radio and rom versions?
drewcam888 said:
Ok so now what are the radio and rom versions?
Click to expand...
Click to collapse
rom 3.56.651.0
radio 3.35.04
Hmm. Well since that didn't make any changes i guess you have a hardware problem.
Would doing a hard reset at this point and bringing it back to OEM do any good? I had an Alltel Mogul that was stuck in a reboot loop and that seemed to work for me, but mine was not after I tried flashing, I bought mine that way with the hopes of fixing it and the hard reset fixed it and brought it back to OEM.
Hi dudes,
I hope that someone can help me:
I have a Touch HD (maybe its a bit overkill too tell this )
I hád a virgin phone a couple of hours ago
information from the first screen (with the boot sound e.d.):
Original RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.34_1.13.25.24_Ship
r 1.13.25.24
g 52.62.25.34u
d 1.56.00.00
And the SPL Screen:
Blac 32M
SPL-1.15.0000
MicroP-Blackstone (LED) v6
So what is the problem?
If i start the phone it "freeze" what means that you can only use the on/off button.
It freezes at the align screen.
I have multiple things allready tried:
1) Different SPL's
2) Different ROMS
3) Different Batteries
What should i do? (i'm almost sure that the hardware is working)
Kind Regards,
John
Hi John,
i noticed there from the output shown from your Bootloader screen it shows that you have spl version 1.15.0000. To upgrade to the ROM such as the one that you posted above, you need Hard-SPL 1.56 installed or 1.54.0000 USPL installed.
Regards.
EDIT: read this guide, it tells you how to upgrade to Hard-SPL 1.56 or USPL 1.54.0000. Once you upgrade to the required SPL, then you should have no problems flashing any of the latest custom ROMs.
the new output:
blac100 32mb
spl-1.56.Olinex
MicroP-Blackstone (LED) v6
And then??
It still freeze..
jay-connected said:
the new output:
blac100 32mb
spl-1.56.Olinex
MicroP-Blackstone (LED) v6
And then??
It still freeze..
Click to expand...
Click to collapse
And have you tried hard resetting the phone yes?
several times..
jay-connected said:
several times..
Click to expand...
Click to collapse
Okay mate. Then in that case, I would advise you to install a stock rom, then install hard spl if needed and you should be good to go. You can revert back to a custom ROM after you have installed the stock ROM.
With all my pleasure..
But.. then i need to change Radio and SPL versions.
I don't know which version was the original..
It is a dutch device with no brand or sim-lock
Can you help me with that?
jay-connected said:
With all my pleasure..
But.. then i need to change Radio and SPL versions.
I don't know which version was the original..
It is a dutch device with no brand or sim-lock
Can you help me with that?
Click to expand...
Click to collapse
Yes certainly, I shall try.
From your first post, it shows you were using radio version 1.13.25.24. Do you have the original RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.3. 4_1.13.25.24_Ship.exe file? If you deleted it then that's ok.
You can download a Stock ROM version for your phone from here, Try entering your phones S/N or IMEI number to see if your phone is eligible for an upgrade and then use that ROM and matching SPL. Once you have flashed back to the Stock ROM, the Radio is normally included and so you should now have radio 1.13.25.24 as depicted in the ROM name
Next, follow the rest of this guide (see bottom of post #1):
http://forum.xda-developers.com/showthread.php?t=431217
Let me know how you get on with that Jay.
Best regards.
Well..
I have reflashed the blackstone:
d: 1.13.25.24
g 25.62.25.34u
d.1.56.00.00
and bootmode
blac100 32mb
spl-1.56.olinex
microp-blackstone.
Now i'm gonna start with your link @ post #1
Hopefully i'm lucky
is it a problem tht i have also a 1.15 USPL?
And is it a goog idea to bring this thing also down to 1.13?
Because i have now the funny green screen..
and it stil "freeze"
You need to give a little more detail. I'm not sure what you have done and what it is that you are trying to do. If you are now using this rom - RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.3 . 4_1.13.25.24_Ship.exe, then you will need to use a 1.54.0000 spl I believe and that is why you have a green screen using spl 1.13.
When did this freeze first start happening? Did you try to flash your phone to the rom above, or was that the rom on your phone all along?
As Mastoid said, you need to read the Flashing guide and follow it step for step.
the first freezing start after my first try to flash the phone to a 6.5 custom ROM.
I will flash 1.54 back on the phone and tell you what happend
jay-connected said:
the first freezing start after my first try to flash the phone to a 6.5 custom ROM.
I will flash 1.54 back on the phone and tell you what happend
Click to expand...
Click to collapse
As this is related to rom flashing, please will you move this discussion to the Flashing Guide thread. I'll try to help you there.
i don't know for sure if this is 100% ROM related, but maybe it is a better idea to move this topic too that sub-forum.. Or maybe i can ask to the users there if they wan't to look at this topic..
My phone is still not responding to any key eccept the on/off button