For an unkouwn reason my device wont't go sleep when I push the power buton. also after some time of connection (3-4 minutes) the screen goes blank and don't respont until I plug the power or a usb cable connected with the computer.
To use it I need a soft. that force the hermes go to sleep.
Do you know any?
Thanks
Related
Anytime I have the K-Jam charging, the screen never goes dim, the backlight is always on. I have selected 5 min shut whether on internal or external power..?
What am I missing..?
Start->Settings->Power, then click the "Advanced" tab. ensure a checkmark appears in the setting for "On Battery Power" (e.g., Turn off device if not used for..").
It will shutdown when connected to a wall charger, but will never dim when connected to a computer via the USB.
Is this a known issue..?
its not a error, its how it should be, when your connected to computer, its not inactive, activesync is constantly running and watching what you are doing.
If anything, you should cancel your activesync process to disable this and also cancel the activesync on the device.
Alternatively, you can try just dimming the screen after inactivity.
I've got a Universal with all the default ROMs and whatnot. I plug it into my PC overnight to charge. I have it set so that the backlight turns off after 5 minutes when connected to external power, and it normally does so. However, it seems like it turns itself on again at random points (it does turn itself off again). I cannot discern what it is that is causing it to turn on, the only relevant thing I have running is ActiveSync and it isn't busy syncing.
Has anyone got a clue why it might do this?
mine will switch on when it's downloading e-mails.
ActiveSync wakes the PDA up at regular intervals to see if it needs to sync, its something you have to live with.
in power settings, the default is to turn on while being charged
have alook at power management in settings
Hi everyone,
There is something strange going with my X1 (WiMo 6.1). While i have my phone connected to my pc for a sync the phone switches off after 30/40 seconds when i do not touch the screen...
This behavour is new and i don't know to get it back to the before state that is during a sync or being connected to the pc the phone does not switch off...
Is there a setting to change this?
Does it go off completely?
does it vibrate and shows Xperia Logo @ SE logo when turning it on again?
if not, then it might be only standby mode, where the mobile is still functional but turns off the LCD for power saving, a small press of the power button will turn it on again.
anaadoul said:
Does it go off completely?
does it vibrate and shows Xperia Logo @ SE logo when turning it on again?
if not, then it might be only standby mode, where the mobile is still functional but turns off the LCD for power saving, a small press of the power button will turn it on again.
Click to expand...
Click to collapse
It does not reset, but just powers down. Goes off. It looses the active sync connection and when you switch it back on it has to regain the active sync connection. Wich is wvery annoiing because you have to keep tickling the X1 to stay alive when you want copy some data to the device...
Any idea how to change that behavour??
was it like this the first moment you tried to sync it? or it started behaving like this? if it wasn't, then it might be a software you installed.
if you can try to hard reset (make sure you backup your mobile) then try to sync.
i think there is some conflict between active sync and another software.
boomdijk said:
Hi everyone,
There is something strange going with my X1 (WiMo 6.1). While i have my phone connected to my pc for a sync the phone switches off after 30/40 seconds when i do not touch the screen...
This behavour is new and i don't know to get it back to the before state that is during a sync or being connected to the pc the phone does not switch off...
Is there a setting to change this?
Click to expand...
Click to collapse
Is this 30/40 seconds timeout your normal timeout for going standby?
If so, maybe the setting in "Settings - System - Power" to not charge the X1 when connected to a PC is active.
Hello,
I had the same problems, wheter using active sync or usb, and even more.
No usb connection, the display did not dimm - it went directly to standby - cutting all the connections (wifi etc). I did not find out, but I think it was some programm I intalled, after a hard reset and only installing what I think what I really need, no problems anymore.
---
cu
Robert
I just received my DHD and as soon as I inserted the battery, it powered on by itself. I plugged in mains for a long charge cycle (I don't want to use it while charging).
I want to power off for real but it seems that when I press the power button even for prolonged time, it just goes to standby. I want to charge it while powered-off. How do I do this?
I didn't have the chance to play with Android before so here I am asking easy questions I guess.
Try with this:
Tap the power button on the upper side of phone for few seconds, then you will see on the screen new window with three possibilities - power off, aeroplane mode and restart. Choose power off. Then you can charge your phone.
Other possibility - work/play with your phone till the battery is fully drained and the phone will switch off itself.
Hope this helps.
Regards.
go to settings applications and disable fast boot
jorjino2000 said:
Try with this:
Tap the power button on the upper side of phone for few seconds, then you will see on the screen new window with three possibilities - power off, aeroplane mode and restart. Choose power off. Then you can charge your phone.
Other possibility - work/play with your phone till the battery is fully drained and the phone will switch off itself.
Hope this helps.
Regards.
Click to expand...
Click to collapse
Thank you all. That's what I was doing but I guess that the screen was locked and it didn't work. As soon as I unlocked the screen and performed this procedre it worked. I just didn't want to start working with the phone until it is fully charged and that's why I was trying to switch off without entering the phone.
If you don't disable HTC Fastboot you phone isn't really off, just hibernating.
andyharney said:
If you don't disable HTC Fastboot you phone isn't really off, just hibernating.
Click to expand...
Click to collapse
Good point but I had to go through all setup steps until I am able to configure this setting. Anyway, I was planning to leave the phone charging untouched for several hours but I guess that wouldn't be possible.
My phone boots back into clockwork recovery even when fastboot is disabled.
Apparently the DHD uses the recovery to display the charging LED (orange or green), so when you replace the recovery with CWM attaching the charger when the phone is off will start CWM.
Hello! I am running cyanogenmod and Timur Rom on 2012 N7. I have tasker to detect power on and power off but here's my trouble..
The N7 will only detect power when the display is on!?!?!?!
If the display is turned off or times out or is locked and I give it power, the display doesnt turn back on automatically. I turn it on manually with the lock button on the side and the battery shows no charge coming through.
With the display still on, i unplug and plug the power back in and it works fine!
I tested it on the PC. PC detects the N7 fine and sees the HDD. Even with the display off, the PC will detect the N7 and I can explore folders but the N7 still receives no power until I manually turn the screen on and unplug and plug the charger back in!
This is preventing me from doing the car dash install because I cannot depend on the N7 to turn on display automatically because it does not detect power with screen off. Only with screen on!
I have went through all settings a million times, tried every 101 troubleshooting step, and I cannot figure it out.
Please, please, please help me figure this out. It's driving me crazy! :cyclops: