Database Users

Flashing Herald with mtty

Is it possible to flash Herald in bootloader mode using mtty or something similar?
Thank you
Christian

It might be, but your device still needs to be CID-unlocked, check this out:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
and this:
http://wiki.xda-developers.com/index.php?pagename=Herald_BootLoaderPassword
READREADREAD, and search the wiki and forums before asking

Hi Dutchman,
believe me, I am reading a lot about this to have my herald work again!
I have looked into links you wrote me.
I dont understand: with mtty I am able to set supercid on herald or only to display cid status?
Thank you.
Christian

Ok, just read the answer in other thread....
thank you.

There is no SuperCID for Herald, only for Hermes I believe, that link a few posts up is from the Hermes WIKI. But since your phone is CID locked you cannot ROM update the Herald. And when typing e.g. :
lnbs [pathname [StartAddr [Length [SkipOffset ["cp"]]]]]
you have to have your device CID unlocked. When you type set: 32 (1) you must not get the message at the end that looks like:
CMD55 failed
g_cKeyCardSecurityLevel = FF
The FF means that your device is CID locked, so you cannot use lnbs, so you cannot flash

chrispazz said:
Ok, just read the answer in other thread....
thank you.
Click to expand...
Click to collapse
Good luck then, I tried everything too (I own a brick too ) But i'll wait for the official WM6 ROM, I hope that i can flash with that one..

Ok, I cannot change CID in my device since it does not go forward after bootloader.
I am looking into a way to change the CID string inside the image (NBH).
Is it possible?
Bye

so The Dutchman, if we install wm6, it can possibly work?
cuz i have wm crossbow which afaik is wm6. it was leaked weeks ago but i cant install it cuz im not in windows

Po5tHuMaN said:
so The Dutchman, if we install wm6, it can possibly work?
cuz i have wm crossbow which afaik is wm6. it was leaked weeks ago but i cant install it cuz im not in windows
Click to expand...
Click to collapse
You cannot install when you are not cnnected with Active Sync - only if it is an OFFICIAL WM6 with RUU.
And when you have an official Wm6 you could share it??
When you want to install Wm6 you need the Os.nb and use any AsergWM6 to get the hand on the folder included - copy your WM6 Os.nb to the Asergfolder and then run update_rom.bat
Good luck. Hope you have an official ROM in your language - because you won´t be able to falsh another rom tthan the one in your country.

The ROM from HTC will come in 2-3 weeks. That was told from someone in a german forum who called the HTC support. Let´s hope it is real.
lol

Deleted - was the answer to the Spam post.

chrispazz said:
Ok, I cannot change CID in my device since it does not go forward after bootloader.
I am looking into a way to change the CID string inside the image (NBH).
Is it possible?
Bye
Click to expand...
Click to collapse
I honestly would not know, but you could give a try with HexEdit.. I do not know if this will work (well I think it will NOT ) but you could try
Try this one:

Yes, but I have to know which is the string to be found.
I have tried to get CID information from my phone using Mtty but it seems to not recognize info and task commands....
Christian

Neither did this work for me, and I have no idea IF and if there is, WHERE the CID-string is located.. Good luck! and if you find it, please post!

with getdevinfo I get a string but it does not seems to be any CiD information:
HTCSHERA10000>¬HTCE
also that string is not found in NBH image....

Hmm.. well like I said, I do not have any knowledge of this stuff.. I can't help you any further!

usualy is the CID 8 characters, It could be your CID is "HERA1000", but it seems more to be a hardware ID.
I don't know the getdevinfo program or command.
In the WWE ship ROM is the CID HTC__001 in the RUS ship rom is the CID HTC__A07. You can find it at the offset 0x1e0 in the nbh file.
Changing the CID in nbh file brakes the signature of the nbh file, so you can't use the nbh file to flash it to the device.
chrispazz said:
with getdevinfo I get a string but it does not seems to be any CiD information:
HTCSHERA10000>¬HTCE
also that string is not found in NBH image....
Click to expand...
Click to collapse

And usign NBHextract end NBHgen to have a signed NBH? Would it be ok?
Christian

chrispazz said:
And usign NBHextract end NBHgen to have a signed NBH? Would it be ok?
Christian
Click to expand...
Click to collapse
Just try

image is corrupted.....

Artemis Radio 02.94.90 (GSM upgrade Only)

New HTC Artemis Radio upgrade only.
Radio Version: 02.94.90
Protocol: 4.1.13.44
You can download it here :
ARTEMIS RADIO UPDATE 02.94.90
NOTE: You need to flash Artemis USPL before flashing this radio, for more info refere to the USPL thread.
Cheers..!

Thanks, I have this radio version for approx 3 weeks and it seems that battery consumption is lower and no other problems so far for me.

Question
Sorry for my question (migh be a stupid one for some people ),
But since my artemis is CID unlocked, do i still have to do that USPL thing?
thanks

mistral82cy said:
Sorry for my question (migh be a stupid one for some people ),
But since my artemis is CID unlocked, do i still have to do that USPL thing?
thanks
Click to expand...
Click to collapse
Yes....!
You still need Run USPL again...!

Hi, How do i flash the nbh file to the device after i run Artemis USPL ?

lommer said:
Hi, How do i flash the nbh file to the device after i run Artemis USPL ?
Click to expand...
Click to collapse
Hum...!
Copy it in Folder Other Rom.Maybe Folder UPSL by Pof and Run RUU like update Rom normal...!

thnx bro

tom_codon said:
Hum...!
Copy it in Folder Other Rom.Maybe Folder UPSL by Pof and Run RUU like update Rom normal...!
Click to expand...
Click to collapse
i have tried every thing, can't get it to work.
is there a multi ROMupdatUtility??

NOTE: You need to flash Artemis USPL before flashing this radio, for more info refere to the USPL thread.
See the first link of Tom_Codon - here ist the link.

uliba said:
NOTE: You need to flash Artemis USPL before flashing this radio, for more info refere to the USPL thread.
See the first link of Tom_Codon - here ist the link.
Click to expand...
Click to collapse
it already is, have Tom's v3 BB already on
but don't know how to juse the NHB file

Is there a chance log or something?
I would like to know the things that have been modified..

Marcus_de_zwarte said:
it already is, have Tom's v3 BB already on
but don't know how to juse the NHB file
Click to expand...
Click to collapse
In this forum you will find the update drivers for 02.93.90 radiorom update - put the new 02.94.90 nbh file into the driver package an it will work.
Link: http://forum.xda-developers.com/showthread.php?t=311508

uliba said:
In this forum you will find the update drivers for 02.93.90 radiorom update - put the new 02.94.90 nbh file into the driver package an it will work.
Link: http://forum.xda-developers.com/showthread.php?t=311508
Click to expand...
Click to collapse
That is what i tried, but that gives a error 270
copied every files in to the dir exept the NHB form 02.93.90.
tried renaming it to the 02.93.90's name, no effect.
the Rom number in ROMupdateUtility says 01.00.00, looks wierd to me.

Marcus_de_zwarte said:
That is what i tried, but that gives a error 270
copied every files in to the dir exept the NHB form 02.93.90.
tried renaming it to the 02.93.90's name, no effect.
the Rom number in ROMupdateUtility says 01.00.00, looks wierd to me.
Click to expand...
Click to collapse
Did you first CID-Unlock?
NOTE: You need to flash Artemis USPL before flashing this radio, for more info refere to the USPL thread.

uliba said:
Did you first CID-Unlock?
NOTE: You need to flash Artemis USPL before flashing this radio, for more info refere to the USPL thread.
Click to expand...
Click to collapse
did USPL before i did the BB v1 update.

Here is a complete Package of the radio update version 2.94.90
CAUTION!!!!
RUN USPL (BY POF) FIRST BEFORE UPGRADING THIS ROM

pvdhelm said:
Here is a complete Package of the radio update version 2.94.90
CAUTION!!!!
RUN USPL (BY POF) FIRST BEFORE UPGRADING THIS ROM
Click to expand...
Click to collapse
i did uspl when i whanted to update to WM6 BB v1(after i briced my MDA )
must i run it again?
i'm on BB v3

Marcus_de_zwarte said:
i did uspl when i whanted to update to WM6 BB v1(after i briced my MDA )
must i run it again?
i'm on BB v3
Click to expand...
Click to collapse
Yes,
You have to do it every time...

goblinIT said:
Yes,
You have to do it every time...
Click to expand...
Click to collapse
i only did it before flashing to BB v1, after that i didn't run it any more- just updated it. also the previus Radio updates whent good without running USPL first every time.

got a q?
Hey some one.. tell me pls..
I'm running your PDVIET Rom WM6 in my orbit. I un bricked my orbit using the rom from step0011. ran uspl and upgraded. even though I had no idea how the process works. so i got this q? what in the g*d name is a radio rom. and shud I need to upgade what are the benifits. shud I run uspl again. if so I will loose the current WM6, won't I?
thnx a bunch

herald bricked,seems to be no way out....

using pof herald beta tool,I decompiled c800 .nbh file,and rebuild it into a herald ruu file,successful write into my p4350,but badly,my herald bricked....
only can start with bootloader..
ipl remain: 4.17.0002(herald wm6 ipl)
but spl become: 1.09.0002(c800's spl)
I try to flash original rom that I used before,but it didn't work by ERROR300,and ppc screen stop at 0%. I TRY any ruu I can find,wm5 wm6,but the same ERROR300.
what can I do? is there any way to go?? or I have to change the flasher?
thanks all,plz help

You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.

pof said:
You need to flash original rom matching your CID, this means the SAME language and the SAME operator/carrier ROM that was originally on your device when you bought it. After flashing this rom device will boot again.
Click to expand...
Click to collapse
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.

when I bought this,It display IPL 5.04.0002 SPL 5.04.0000 ,which rom can I use to fix???
plz give me one.thanks pof
by the way, which cid am I have now? htc p4350 or dopod c800?????

Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.

duprade said:
Where did you buy your phone? What type is it? Is it an actual HTC Herald? if you bought it from a cell carrier, maybe you can log into their site and download it there.
Click to expand...
Click to collapse
my phone is actually htc herald,no doubt of this,but I bricked it when I change the SPL IPL.... so the SPL had become wrong.

pof,,,,it really became no way out,I think I should go to the shop,and repair it with a new flasher.
I had tried all the language I can found on wiki and web. none of them can work.
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe (can use beforetime)
EURORUU_Herald_HTC_NOR_5[1].4.409.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe
ruu_herald_htc_dan_5[1].4.403.2_4.1.13.34_02.79.90_ship.exe
RUU_Herald_HTC_GER_5[1].4.407.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_RUS_1.8.411.3_02.71.90_Ship.exe
RUU_Herald_HTC_RUS_5.4.411.2_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_SPA_5[1].4.412.1_4.1.13.34_02.79.90_Ship.exe
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe
HTC_P4350_ITA_4[1].17.408.2_4.1.13.44_02.94.90_Ship.exe
HTC_P4350_WWE_4[1].17.405.2_4.1.13.44_02.94.90_Ship.exe(can use beforetime)
so sad..

bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?

itje said:
bring your device to a friends house, use his computer and try to flash the RUU, maybe its your computer that has a bug?
have you the correct drivers installed for usb connection?
Click to expand...
Click to collapse
thank you all the same,but I don't have any problem with what you said.

okay thats good
crappy stuff, bricking

itje said:
okay thats good
crappy stuff, bricking
Click to expand...
Click to collapse
yes,thanks.
I would like to know if I change the flasher,can I make the trouble shoot?

didn't think it was possible to brick a herald. def gonna b more carefull now

yangchao8115 said:
thank you.
but I really used the original rom.I used my IMEI and download original rom from the HTC.COM ,but it didn't work and remain the ERROR 300....it wm6 vision.
wm5 vision,I don't know which is my original rom,but I had try three of which I found on wiki. and also not working.
Click to expand...
Click to collapse
me too and tried many rom but fail erro 300 0% stop IPL AND SPL 1.08.001 . it was died and waiting for new unbrick way

wooo...cost me 400rmb to make it repaired,changed a flasher and I now the make my herald superCID . after repaired I used the SDcard to flash the wm6ruu (using the file named heraimg.nbh on sdcard) .whatever it's ok now thanks everyone

ok.do it in your ways.

ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?

The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.

my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers

papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
itje said:
my herald p4350 got
spl 4.17.0000
and its not working for me either
I tried downgrade to wm5 then run the hard-spl, got as far as getting the "whitescreen" didnt get that with wm6 installed
But spl stayed same after.
sorry
cheers
Click to expand...
Click to collapse
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb

canonyang_China said:
NO,it work,I am not using the one in his post.
Is the older one v4.20 for testing. what he released is v4.60
OLIpro start testing the hard spl with me,form v4.1 to v4.5 till my herald bricked he test with another guy and released the v4.6.I notice that oli maybe forgot to double up the nb file,it should be 1024large,and the nbh file should 1025 kb
Click to expand...
Click to collapse
a
when will it be available then?

itje said:
a
when will it be available then?
Click to expand...
Click to collapse
I don't know.you should ask olipro.
IF you are T-WING or VADEFONE or HTC 4350 no need to unlock.just use JumpSPL by pof to flash your SPLASH EXTROM OS,but don't do anything else.
JUMPSPL,jump into 0x10000000,then flash with ROMUpdateUtility.exe to flash NBH file.
NBH file can make youself by using HTCRT.exe.
SPLASH file can make youself by using SplashScreen.exe
EXTROM you can edit it with winimage.
cheer.

canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!

Help Link Doesnt Work
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks

thanks!!!!great work!i think very much people want to use it ~~~~~~~~~`

lxa786 said:
The Link You Posted, I Try To Open It But It Doesnt Work.
Please I Need Your Help.
Can You Please Give Me An Other Link
Thanks
Click to expand...
Click to collapse
use proxy http://www.ok-proxy.com/ enter the link into it.
canonyang_China, you seem to be a smart cat with the XDA's. Heres my problem
I flashed my German XDA Terra (Herald) from TOuchIt 1.1 to 2.0 and doing so I briked my device.
I tried the HArd SPL, nothing worked.
Whenever i want to Flash, I get into bootloader mode, then at 2% the device restarts and I get INvalid Vendor ID or when I try the Hard SPL I get "Corrupted Image"
What can I do to unbrick my device since there is no RUU for the XDA terra WM6
Please help !!!!!
Click to expand...
Click to collapse
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.

Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:​
Click to expand...
Click to collapse

hdubli said:
Hi
I wud request if u can read my opinion on lower bootloader in the Hard SPL thread.I hv been trying and trying, but failing,untill POF released Jump SPL.
Just as an information, lower bootloader Heralds shd b upgraded to higher bootloader first using Jump SPL.
Pls do not flash a part of ROM...viz only OS or only radio..pls flash the complete ROM and yr herald will boot with the new OS and higher bootloader.
Then one can use aserg techniques to flash OS.nb..If one flashes OS.nb in lower bootoader, one will get Radio Error.So it is important to get higher bootloader first.
With Jump SPL, also, pls do not try to flash any part of ROM, just flash a full NBH, else it will not boot yr Herald.
Hv tried above with 10 heralds(Dopod C800 with BL 1.09)
I hope this helps
canonyang_China said:
Dear OLIPRO:​
Click to expand...
Click to collapse
MAYBE that a way.I know that the spl ipl must be suit for the radio or it will not boot,will gone black screen.
I do want to confirm something.
first,you mean flash high SPL IPL like WM6 one totally NBH via Jumpspl?
second,Jumpspl to flash,if you succeed.the device will boot normally?
third,after you flash,which cid do you have?(check in MTTY or try to flash the ruu which you get the NBH)
fourth,if I want to try,maybe I would like to make a nbh with hard-spl to flash.after all,it cid unlock,and we can do something more if it failed.
cheer​
Click to expand...
Click to collapse

papamopps said:
The O2 XDA Terra has got
SPL 4.11.0000
... and the Hard-SPL is NOT working!!
Sorry.
Click to expand...
Click to collapse
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.

yangyqh said:
My device is same to your!(O2 terra)It was bricked!But it can work now after changed the flasher!AND canonyang make me Hard-spl,now I am using WM6.
Click to expand...
Click to collapse
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!

canonyang_China said:
use proxy http://www.ok-proxy.com/ enter the link into it.
I am sorry,as I said in the post.I don't know how to unbrick,especially like O2,c800,c858.as they have no ruu.
Click to expand...
Click to collapse
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me

zubi1984 said:
I need help on htc P4350 it don;t power up only goes to boot-loader
ipl 1.08.00001
spl 1.08.00001
i need help to unbrick that if you help me i am thankfull to you i flashed all roms but stops saying invalid update tool.
please help me
Click to expand...
Click to collapse
If you are htc p4350,don't worry about anything.follow my steps:
1,Take off your battery to get you SN.
2,GO TO www.htc.com
3,Mouse action to E-CLUB icon.
4,Join is member with your SN,then login on.
5,You will see "Phone Software Updates" follow it and you will get a Offical RUU cid suit your device.
6,After downloaded,RUN the RUU and your device will back to life.your IPL SPL will change into 4.17.your os will be wm6.
7,if you can't find anything in "Phone Software Updates".please try all the WM6 RUU for HTCP4350 in the first post to find one suit for you cid.try the WWE one first.
cheer

exxi said:
Hey, I have a bricked Terra too, is there any way I can fix it? I get into Bootloader, I had WM6 before, Updated to TouchIt 1.1 then when I tried to Update to TouchIt 2.0 It bricked.
Any ideas?
When I leave it load it will not go past the O2 Bubble screen.
When I try to update it only goes to 2% and then I get invalid vendor ID.
Please advise Me!!
Thank you!!
Click to expand...
Click to collapse
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！

Tell the people around you：Taiwan is a province of China！！！
cheer for you

yangyqh said:
I think you must first change ROM
Want to upgrade Hard SPL must be able to enter the system！
Click to expand...
Click to collapse
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.

edzilla said:
Yes, right now, there is no RUU for the terra, so he has to send it to O2 for repair.
Click to expand...
Click to collapse
yep,you are right

first WM device...

Hello
I got a little problem, I got HTC HD Mini... From germany. Problem is that i Polish LNG there. But I dont have idea how to do it. Only thing that i know is that i have SPL 1.31.
so Can Anybody help? Telling me, step by step how to upgrade it?
THX

aazmath said:
Hello
I got a little problem, I got HTC HD Mini... From germany. Problem is that i Polish LNG there. But I dont have idea how to do it. Only thing that i know is that i have SPL 1.31.
so Can Anybody help? Telling me, step by step how to upgrade it?
THX
Click to expand...
Click to collapse
1. http://forum.xda-developers.com/showthread.php?t=694409
when you actually understand the first post then you can look for an appropriate ROM in your language
2. http://shipped-roms.com/index.php?category=windows mobile&model=Photon

" Add the RUU_signed.nbh that you want to flash to your device into the same folder "
From where Can I get this file? And How Can i sign it?
And This SSPL req at least 1.4 SPL i got 1.31

aazmath said:
" Add the RUU_signed.nbh that you want to flash to your device into the same folder "
From where Can I get this file? And How Can i sign it?
And This SSPL req at least 1.4 SPL i got 1.31
Click to expand...
Click to collapse
"SSPL_RUU.exe" is ready for download and located on the bottom of the first post
http://forum.xda-developers.com/showthread.php?t=694409
"RUU_signed.nbh" is a new ROM that you have to download.
http://shipped-roms.com/index.php?ca...e&model=Photon
When you have all you can start changing the ROM only when you actually understand the first post
http://forum.xda-developers.com/showthread.php?t=694409