new 8525, wifi button doesnt turn on - 8525, TyTN, MDA Vario II, JasJam General

Yes I have searched for days and RTFW to no avail. New 8525 from warranty. I dont have a data plan as I only use home wifi or the rare hotspot. I flashed hard spl, flashed WM6. Everything on the phone works perfect except the wifi button stays X ed. Wont recieve broadcast from router at any distance. Did something happen in the flash. Is it the radio missing something or a driver missing. I reflashed the ATT WM6 ROM from HTCAMERICA just in case and have same problem. It doesnt seem like this has happened here yet or I am blind from reading for 3 days. Thanks so much in advance, you all rock.

perhaps you need downgrade your spl to 1.01 and then use mtty to fix
your wifi

wifi on hermes
i have a hermes (herm200) with wm6 pro (from TNT series) everything works so well, except the wifi.
it will not start at all,
blakest suggested using mtty to fix, but where to start? perhaps someone could do a step-by-step?
or a stable enough rom will do.
tia.

I'd suggest also looking at the registry to see if its activated.
You need to use a registry editor then go to HKEY_local_machine>software>HTC>CommManager>WLan. 1st entry should be value name : default, Value data : \WLanMgr.exe
2nd entry should be Value Name : Device name,
Value data : 5-AE5F-AFE5367E5006}\TIACXWLN1
Some newer roms don't have these filled in (especially the WLanMgr.exe value.
Hope this helps...
Cheers...

its better to move for warranty

Related

Lost and Scared - CID + ROM heeby jeebies!

Hello, I have scoured and search and read multiple forum posts here about Lokiwiz, Faria's Incredible ROMs and how to downgrade etc etc. But I am still muddled oh a few things.
Firstly:
I have an HTC Wizard from T-Mobile that is SIM unlocked and working on local network with local SIM. I am completely happy with the phone but for the fact that my WIFI does not work.
I have found posts that gave me RegEdit instructions to fix this and they have not worked. I have read through a multitude of pages and posts here and at HTCWIzardWeb on upgrading rom etc and it freaks me out... last thing i want is a brick - as seems to be the expression.
I have the latest release ROMS from T-Mobile per their website.
So:
1. How can i tell if my Wizard is CID unlocked?
2. Is there a way to activate the WIFI without switching to a cooked ROM?
3. Are there other manfuacturers ROMS that I can transfer to that have WIFI enabled?
Simply put I am scared to death of this whole ROM update thing and I am not ashamed to admit it. Down right fearful!!
I am such a noob to the whole PPC thing that if possible I don't want to mess with too much until I get feet a little wet with some simple things. And the last thing I want to Brick my phone...
So if anyone, can help me out and provide some clear concise info about these things, that would be greatly appreciated.
I look forward to getting in deeper with all this stuff, but for now I just need a little spoon feeding.
Thanks!
Rob
Hey Rob,
Soft-reset your phone and on the white screen that flashes up (with the t-mobile logo on it) there should be some letters and numbers in the upper-left hand corner of the screen. What do the numbers next to IPL and SPL read?
if they end with .0001, i'm afraid your phone is a G4 and is CID-locked, my friend...
but don't worry...there are ways around this. I myself have a G4 Wizard (t-mobile) and have been able to flash many different roms (i'm currently using xplore wm6 which is great btw). I believe there's a G4 flashing tutorial in the G4 threads...
but, if you're still too nervous, don't do it just b/c i said it was possible! I don't want to be responsible for bricking your phone!
My phone is G3 per other posts... no .0000x after the IPL and SPL.
hmm...
I used to have the most recent t-mobile rom for the MDA as well... but I never had any issues with the wi-fi... have you tried connecting with many different access points?
or, t-mobile forbid, a hardware issue?
manchoi44 said:
hmm...
I used to have the most recent t-mobile rom for the MDA as well... but I never had any issues with the wi-fi... have you tried connecting with many different access points?
or, t-mobile forbid, a hardware issue?
Click to expand...
Click to collapse
Not sure what it is exactly... just does not connect to any wifi. Read on various forms that T-Mob lokced it off, but nothing seems to have a clear answers...
one post here had a cab that supposedly worked but it did nothing... which made me believe I was not CID unlocked and started me down this whole haunted house of ROM speak...
If you decide you want to try the flashing route to move to a custom rom, here's the thread to read and use to get yourself CID Unlocked and then into the promised land of custom roms
http://forum.xda-developers.com/showthread.php?t=298613
Can't say whether going to a custom would fix your wifi issue (I'd advise you stay away from WM6 roms as Wifi isn't always reliable with some of them). Maybe try Faria AKU 3.3, or Molski 2.3 final as they are good solid custom roms.
Then if you don't like it, you can easily flash back to your trusty T-Mobile 2.26 ROM and be back to known territory.
Good luck!
Appreciate the link and the advice, however, I am still trying to find out how I can I tell if my device is already CID unlocked. That is priority one and surely there has to be a way to tell.
Next I want to know if there is an easy, non-ROM-Flashing way to activate my WIFI. Again surely there are some things I can attempt to adjust this prior to flashing a custom ROM??
After that, if I still can't get the WIFI to work, then I will have to lose the skirt, tighten the ol' jock strap and dive feet first into this ROM flashing world.
So again, first I need to know these things:
1. How can I tell if I am already CID unlocked?
2. How can I try to activate my WIFI (RegEdits?)
Thanks
roback80 said:
Appreciate the link and the advice, however, I am still trying to find out how I can I tell if my device is already CID unlocked. That is priority one and surely there has to be a way to tell.
Next I want to know if there is an easy, non-ROM-Flashing way to activate my WIFI. Again surely there are some things I can attempt to adjust this prior to flashing a custom ROM??
After that, if I still can't get the WIFI to work, then I will have to lose the skirt, tighten the ol' jock strap and dive feet first into this ROM flashing world.
So again, first I need to know these things:
1. How can I tell if I am already CID unlocked?
2. How can I try to activate my WIFI (RegEdits?)
Thanks
Click to expand...
Click to collapse
I have read almost every post in this form, and I remember coming across question 1. The answer is: You can't tell, the best and safest way (so you are less likely to brick your phone) is the follow the procedure step by step (DO NOT SKIP ANY STEPS) in written by Dr. P found here http://forum.xda-developers.com/showthread.php?t=285435 to unlock the phone. If you try to burn a custom ROM without unlocking, you'll have big problems.
Question 2: By default, your phone probably has wifi 802.11G turned off in the reg settings. Only 802.11b is turned on, so unless you have an 802.11b router it will not work. Have you tried this tweak?
• Enable 802.11g 54Mbps
To enable 802.11g set:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS "dot11SupportedRateMask"=dword:00000001
and add this key:
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS "dot11SupportedRateMaskG"=dword:00000008
I used a number of WM6 ROMs and the wifi always worked great, I also used Cingular’s stock WM5 and now I’m Faria’s WM5 3.3 and the wifi always works great! All of the costume ROMs I have used already has this wifi tweak added.
Okay, I tried the regedit and both of those keys already exist and are already set to 1 and 8 respectively. Nothing.
So i guess that leaves me one final option and that is to CID the darn thing and hope to God I don't turf my unit.
Thanks for the help... Any last words of advice/caution/etc. before I dive into this process?
Just read and follow the link I gave you above. Don't skip steps and you will be fine. Its really not that bad, and you will be amazec at how your phone can perform.
Are you sure you're understanding what WiFi is? Do you have a wireless router? Not trying to insult you, but the way you are asking the question infers that you think the phone just comes with wifi that gives you internet access. Wifi requires a wireless access point
If you want internet everywhere, you're thinking of GPRS, which either requires a data plan, or is charged per kilobyte.
Yes, I know what Wifi is. I have a WRT54G Linksys wireless router set to b/g mode. Laptop connects to it without effort. My iPaq 6315 connects without effort. Know my Wizard can do the same, but can't seem to get it to work... which has brought me here...
So I start reading through steps, downloading all the files suggested and preparing to CID unlock and flash a new ROM. But when I get to step 3 of Docs directions, I realize one thing, that I don't really know how to "Flash" a ROM or Downgrade. Now call me stupid if you must, but my searches of the forums keep bringing me back to the same thread from Dr.P. And Step 3, I quote, "3.. Downgrade your ROM to the Button 1.05. Let it go through the whole setup please..." But it doesn't tell you HOW to downgrade!
Okay, you finished laughing and cursing me?
But I am serious about not knowing HOW and deathly afraid of bricking my Wizard I figured it would do no harm to ask and get a full clarification of the whole process.
So if someone could help me out in that regard, that would be greatly apprecaited.
Thanks
Downgrading the ROM is as simple as downloading the file and executing the ROM update utility (RUU). After that, just simply follow the instructions.
RUU is your friend (unless you are on a G4, then you need to be careful with it). But yeah, just download the file and execute it. You'll need to have your phone connected to your computer. It will step you through the process.
I was hoping it was that easy, but gotta make sure... better to ask than to be another poster with a brick
Alright!!! Did it and it worked like a charm!! BUT STILL NO WIFI ACCESS!!! WHAT the HECK!!
So now I search for a custom ROM that might solve this problem.
Any suggestions?
And thanks for the spoon feeding...
How is your router set up, what kind of security settings?
So to make sure all of us have the complete situation down. You can turn on wi-fi, you just can't connect to anyone? Does it list your router? Did you try downloading Wififofum and see if it shows your router on the radar?
BBowermaster said:
How is your router set up, what kind of security settings?
So to make sure all of us have the complete situation down. You can turn on wi-fi, you just can't connect to anyone? Does it list your router? Did you try downloading Wififofum and see if it shows your router on the radar?
Click to expand...
Click to collapse
Router set up in WPA-PSK, dual b/g mode. When I tap the WiFi button in CommManager, it shows the windows loader icon for a few seconds, then shuts off the Wifi. It is not even turning on the wifi. Nothing else on the router is customized... just straight out of the box WPA settings.
I have tried switching to just b and just g to see if that made a difference, but absolutely nothing.
There are 4 secured wireless networks in my complex. My Laptop detects them all. My iPaq 6315 detects them all and connects to mine with no problems. Put the PassKey for my router in the iPaq and presto, no hassles at all. My Wizard... Nada!! When I go to Wifi settings, it does not even allow me to enter info into the settings fields.
Have not tried Wififofum yet... but would it make a diffence if I cannot get my wifi to turn on? This is the thought process that brought me to looking at Custom ROMS. Thinking T-Mob has locked it off or something? I mean when I researched PDA phones and chose the Wizard (T-Mob MDA) I did so because it was wifi capable. And everything I have looked up since says it is.
I have tried the RegKeys and unless I am doing something wrong they didn't change anything.
So I am at a complete loss. So maybe I should try Faria's AKU2 ROM? Or his WM6 ROM? Any suggestions?
Thanks
A few people have intermitten problems like the one you describe, but not constantly. I would just try flashing T-Mobile's official rom first, no cooking, unlocking, etc needed. See if that fixes it.
BBowermaster said:
A few people have intermitten problems like the one you describe, but not constantly. I would just try flashing T-Mobile's official rom first, no cooking, unlocking, etc needed. See if that fixes it.
Click to expand...
Click to collapse
I currently have the latest T-Mob ROM. Just CID unlocked, but there are no other customizations or cooked up stuff done to it.
For further reference, Staying at a friends house, whose running same WRT54G Linksys, but has it unsecured. Laptop connects. iPaq connects. Wizard nada.
So I am left thinking 3 things:
1. Something wrong with the ROM I have (standard tmobile 2.26)
2. Something wrong with the regkeys or other settings.
3. Something is physically wrong with my wifi on my wizard.
Any suggestions (and links) to another ROM known to work with Wifi??
PS Also of note, though not sure if related - Bluetooth works fine on the device. Can communicate with laptop and ipaq via bluetooth.
roback80 said:
So I am left thinking 3 things:
1. Something wrong with the ROM I have (standard tmobile 2.26)
2. Something wrong with the regkeys or other settings.
3. Something is physically wrong with my wifi on my wizard.
Click to expand...
Click to collapse
Here's how it SHOULD work. When you turn on WiFI from the CommManager screen, the icon will indicate that its now on. If that never turns on its either a problem with your rom or you have a hardware issue. At this point you should go grab your latest official rom from your carrier (TMobile 2.26) and reflash it (even if thats what you already have). If you still have the issue then to me its a hardware issue. If you don't believe that and have to further prove it to yourself then go get the official Cingular rom (its on the HTC website just tell it you have an 8125) or get the Wizard Love rom and flash them to see if it makes a difference (but if TMobile ship can't turn it on, the others won't be able to either is my bet). Your only option then is to do a hardware exchange (just make sure you put it back to the TMobile rom.
If that WiFi button in the CommManager does turn on, then at that point your phone will search and then tell you the access point(s) it finds (Both secured and unsecured). If that doesn't happen then most likely its a hardware issue.

How can I fix my WiFi problem?

I have not been able to turn on wifi reliably for ages now - It all started when I upgraded to WM5. Now (even if I downgrade to wm2003se) I cannot turn it on. I press the wifi on button, the cursor comes up but nothing happens), leave it for a couple of hours, and then press again - it will sometimes turn on. It then stays on for about 30 mins, and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
hardint0110
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
TheWizzard2203 said:
What you can do is to check the following keys in the registry:
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Both dword with decimal values. Next, when you made the changes, softreset and check if your wlan is working.
Keep us posted.
Cheers.
Click to expand...
Click to collapse
Dont seem to have the directory Tnetwln1
I am using a Blue Angel with xplode wm5 AKU 3.5.2 rom kitchen 2
i do have a directory called tiacwln1, and another called tiacwln.
I have attached them here, so you can have a look yourself:
(rename .doc to .reg if you need to)
Thought I had some progress there, but now all is back to normal...
Still no luck... found this: http://www.teksoftco.com/forum/viewtopic.php?t=194
but it wont turn WiFi on and off.
WIFI does not run on Wizard
I have not been able to turn on wifi reliably for ages now
I press the wifi on button, the cursor comes up but nothing happens), it will sometimes turn on. It then stays on for about 1 - 5 seconds, and shows connecting BUT DOES NOT CONNECT and turns off (I have the wifi set to never turn off).
I cannot diagnose the problem - can you?
Any help GREATLY appreciated - feel free to ask for more details.
Copied a part of the Message from the ORIGINAL THREAD
Thanx In advance
-jeasbe'
Thank you
The registry jack worked 4 me i don't know how to thank you really you helpde me a lot
No Luck..Need to USE THIS URGENT
I tried it but on Reboot My settings return back from
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 1
RETURNS BACK to
HKLM\Comm\Tnetwln1\Parms\HTCPreloadstatus --> 0
___________________________________________
The other setting
HKLM\Comm\Tnetwln1\Parms\HTCPreloadwifi -->1
Stays same
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
No Luck
Stevos said:
And after that, have you tried to soft-reset the device ?
There's a good change if don't, the change won't have any effect just like on you're desktop/laptop etc.
Click to expand...
Click to collapse
Of course, That's what I said that "I tried it but on Reboot My settings return back "
After the Reboot/ ie after the Soft reset.
No Luck
I have the same problem.
the value change back to 0 after soft-reset.
I tried several times even waiting for some minutes before soft-resetting.
So it means ??
NO LUCK ??
~smile~
@jeasbe: I just wanted to second your finding...
Actually I suspect some hardware/EEPROM issue like this (Hermes):
http://forum.xda-developers.com/showthread.php?t=304004
this is my story:
1. Got the Dopod from the provider with Chinese ROM (living in mainland China at the moment). Did not test WiFi.
2. After strongly insisting on an English GUI I got an update to an English ROM from the provider. Since then no WiFi
3. Asked the provider about WiFi on my Dopod. He confirmed that it was not working but had been working with the Chinese ROM before.
.... (so excluded user problem but still no solution)
4. Decided to upgrade by myself assuming the problem lies in the ROM version.
.... Upgraded step-by-step with the various ROM versions to XM6 according to tutorial 'n checked for each ROM version for WiFi. Still no WiFi.
5. Installed the WiFi patch for the commgr. No WiFi.
6. Read about that registry hack. Values do not remain after soft-reset. No WiFi.
7. Colleagues have the same problem (but still with the English ROM from the provider). So will ask one of them to hand-in to the provider to change back to Chinese ROM in order to see whether WiFi is working with that setting. But doubting it
8. any other ideas appreciated ...
another thread with similar issue:
http://forum.xda-developers.com/showthread.php?t=296936
It looks like the Hermes guys (Drummer) found a solution:
http://forum.xda-developers.com/showthread.php?t=322225
However, I am not an expert so don't whether it is possible the adapt the approach somehow to the Wizard.
any news here? ive got exactly the same problem
bug-i said:
any news here? ive got exactly the same problem
Click to expand...
Click to collapse
I found out that if you have a CHS version officially sold in China there is no WiFi feature in the phone - this rule applies for all models from any manufacturer.
I am not sure though whether it is really hardware (like missing the WLAN chip) or software issue (on a level below the ROM, because change to different ROM [incl. change of IPL/SPL and radio] won't help).

Trinity - multiple little problems

Hi,
First of all, I'm new here and I'm sorry if
a) These questions have been answered here 3748 times or
b) I have put this in the wrong forum/in the wrong format. I decided to group my questions together, in order to avoid cluttering the forum.
If a moderator feels I have posted this inappropriately, I'm happy to correct it, (eg. split this post into three).
So, that much for the disclaimer, don't shoot the noob
First question:
So, I bought a (used) trinity, pretty cheaply, and for the most part have been happy with it. Even got the GPS working, with the official update from the HTC website.
So, now that I knew how the rom flashing process went, I tried flashing the Indigo rom I downloaded from the forum. The problem is, I get stuck in the rom upgrade process, when the flashing is actually supposed to start. The PDA asks me to accept running the EnterBootLoader program, I accept, and the phone restarts, then, the system pops up with "connection lost, error 246 if I remember correctly". The phone returns to normal after a soft reset, so no harm done, but no good either. Is there some solution to this problem I am unaware of. Oh, the same happens when I try to flash hardspl too, so either, the current official ROM has some deviousness about it, or it's my computer. that is to blame.
Second question:
Two times now, my trinity's phone has played some tricks on me. First time, it showed an exclamation mark on the phone networking icon, the second time, all seemed normal, except, I couldn't access the phone settings, and when someone called me, to them it seemed I was just not picking up, but on my phone, nothing seemed to be going on. Is this normal, just another windows being windows, or could this be an indication of a hardware problem, or a problem with the dialer?
Third question:
When I first received the phone, it always tried to use GPRS or 3G to connect when I opened IE, even when there was a perfectly good WLAN connection connected. Upon ROM upgrade, all connection settings were lost. Originally, in the connection view, there were 2 or 3 sets of connection settings, now, there is only one.
- Am I supposed to add sets of settings there?
- I don't know where I am to add the 3g and GPRS settings?
- How do I set WLAN proxies, on the one set of settings I can see on connections, I can set a proxy, but it doesn't seem to work: at school, I can only see the internal network, but can't access the Internet.
I would also need to have two sets of proxy settings, one for school, one for home, is this possible?
Then, some spex from the phone, so you don't have to ask:
OS: WM5
ROM version: 1.23.403.2 (Offical, GPS enabled)
Radio version: 1.38.00.11
Protocol version: 32.71.7020.12H
ExtRom version: 1.23.405.103
Phone sold under name: HTC P3600
Finnish retail version.
Oh and on final note, this is an amazing forum, even if I started reading this a week before I got my phone, and have continued to do so ever since, the amount of information on any given subject related to PDAs and mobiles seems endless. I look forward in your insights in this matter.
Easy HTC Operator Configuration
Hi, if you have lost your Operator settings, there is an easy way
to set these settings :
You only need to download the operator configurator at http://www.planete-htc.com/index.php?mod=telechargements
It works well with Orange for me.
thanks to planete-htc
Hope this can help you.
Regards
botia said:
Hi,
First of all, I'm new here and I'm sorry if
a) These questions have been answered here 3748 times or
b) I have put this in the wrong forum/in the wrong format. I decided to group my questions together, in order to avoid cluttering the forum.
If a moderator feels I have posted this inappropriately, I'm happy to correct it, (eg. split this post into three).
So, that much for the disclaimer, don't shoot the noob
First question:
So, I bought a (used) trinity, pretty cheaply, and for the most part have been happy with it. Even got the GPS working, with the official update from the HTC website.
So, now that I knew how the rom flashing process went, I tried flashing the Indigo rom I downloaded from the forum. The problem is, I get stuck in the rom upgrade process, when the flashing is actually supposed to start. The PDA asks me to accept running the EnterBootLoader program, I accept, and the phone restarts, then, the system pops up with "connection lost, error 246 if I remember correctly". The phone returns to normal after a soft reset, so no harm done, but no good either. Is there some solution to this problem I am unaware of. Oh, the same happens when I try to flash hardspl too, so either, the current official ROM has some deviousness about it, or it's my computer. that is to blame.
Second question:
Two times now, my trinity's phone has played some tricks on me. First time, it showed an exclamation mark on the phone networking icon, the second time, all seemed normal, except, I couldn't access the phone settings, and when someone called me, to them it seemed I was just not picking up, but on my phone, nothing seemed to be going on. Is this normal, just another windows being windows, or could this be an indication of a hardware problem, or a problem with the dialer?
Third question:
When I first received the phone, it always tried to use GPRS or 3G to connect when I opened IE, even when there was a perfectly good WLAN connection connected. Upon ROM upgrade, all connection settings were lost. Originally, in the connection view, there were 2 or 3 sets of connection settings, now, there is only one.
- Am I supposed to add sets of settings there?
- I don't know where I am to add the 3g and GPRS settings?
- How do I set WLAN proxies, on the one set of settings I can see on connections, I can set a proxy, but it doesn't seem to work: at school, I can only see the internal network, but can't access the Internet.
I would also need to have two sets of proxy settings, one for school, one for home, is this possible?
Then, some spex from the phone, so you don't have to ask:
OS: WM5
ROM version: 1.23.403.2 (Offical, GPS enabled)
Radio version: 1.38.00.11
Protocol version: 32.71.7020.12H
ExtRom version: 1.23.405.103
Phone sold under name: HTC P3600
Finnish retail version.
Oh and on final note, this is an amazing forum, even if I started reading this a week before I got my phone, and have continued to do so ever since, the amount of information on any given subject related to PDAs and mobiles seems endless. I look forward in your insights in this matter.
Click to expand...
Click to collapse
OK third question seems answered. You should find network operator settings on the HTC website.
Second Question - try flashing a ROM / Radio ROM again and see if you still have the problem. (For that you'll need an answer to question One
First Question: if this happens, you should leave the phone in bootloader mode (three coloured bars on the screen) make sure it say USB at the bottom of the Trinity screen - make sure you're not using Vista as an OS - use XP. provided the above conditions are met, exit and run the Rom Upgrade Utility again. This time the progress bar should show - start moving - and your ROM will flash. Search Google for trinity guids on how to for vista if that's you case.
Thanks for the answers, first of all,
I actually found out one bit of the problem by searching the forum, it seems my firewall might have been the cause of the ActiveSync problems I've been having. The Kerio Personal firewall seemed to cause the rapimgr.exe to go into a loop, this might have caused problems to the Rom utility as well.
The strange thing is, this problem only stopped when I _uninstalled_ the KPF, not when I turned it off.
I will load the operator settings you mentioned
The only thing left is the WLAN proxy settings, how do I set them, and is there a way to have two sets of them, say, one for each network SSID?

Dead WiFi on my Touch HD. Possible reason: corrupted WiFi EEPROM.

MY problem is. The wifi won’t turn on, and when u go to wifi icon in the connection the turn on wifi won’t be ticked. I have tried a lot off rom and even back to the original Orange rom and spl, all the same didn’t change anything.
I’ve been advised that my WiFi EEPROM has been corrupted or blanked somehow, that's the usual cause.
I need to get hold of an EEPROM from another device and write it onto mine.
This problem has already been known and solution has been found for Hermes model (below is the link to that thread) :
http://forum.xda-developers.com/showthread.php?t=322225
Can anybody help me in my problem? I need tools (something similar used for Hermes model) and working Touch HD.
P.S. As I can see, by reading this forum, this is not only my problem.
I got the same problem as u, The wifi wont on and ticked.
But some times it will. I also doubt this is an hardware problem.
Because some time it will turn on and some times it wont.
any help here?
Now, I found My problem.
When ever I instaled any program. the wifi will stoped working.
is that software issue?
or hard ware issue?
But when I didnt instal any third application the wifi work perfectly, I have changed to several rom including 6.5 coocked.
i'm sorry to tell u this guys, because i used to have the same problem and even worse the camera used to show only blank screen and i my pc couldn't detect my HD via USB, so i searched for solutions but i couldn't find any. I guess the only solution for this problem is by replacing the main board by HTC so if ur mobile is still under warranty go and replace it as i did. I'm also afraid to face this problem again cuz i found that many people are having this problem. plz let me know if manneged to get it works without replacing the main board.
I am trying to attract our gurus' and moderators’ attention, because I believe that we can solve this problem without replacing mainboard. I also believe that HTC corp is making profit by receiving our some kind of broken mainboards, reflash them with the stock EEPROm and sell it as a new again.
Our gurus are spending their times to create bulk of custom ROMs, where at the same time solving such problem with WiFi, looks more interesting and challenging.
Also I understand that if we had real hardware problem, no Wi-Fi, no Bluetooth, nothing would work. But everything is OK, apart from Wi-Fi.
If we have done this for Hermes model, why not to do something for HD as well.
Intermittent wifi
I now also have this problem, having just received a replacement from Orange for my original HD, which I dropped resulting in a badly cracked screen. This first unit had no problem with wifi, and I used it regularly on my home network. I loaded up the new one with all the same software, and, lo and behold, the wifi has become intermittent. Sometimes it works fine, at others when I attempt to switch it on the wifi symbol appears at the top of the screen momentarily and then disappears again, and there are also periods when it won't switch on at all. I have been trying to detect some pattern to this, or if there is something specific that triggers it, but so far without success. I am close to asking Orange for another replacement, and the comments above re corrupted wifi eeprom reinforce this. I also would be interested to hear from the gurus about this issue.
Loads of people report the problem, here and on other sites, but HTC has never explained what was wrong with the returned units (simply swopping MoBos and sending them back) and neither has anyone shown what combination of things "triggers" it - if indeed there is a trigger. It may just be a QC issue.
There was an anecdotal suggestion that the BT/WiFi antennas are too close to the board, so despite the EM shielding running the two together could cause damage, but nobody's been able to replicate it (and I doubt they ever will, as it requires someone to intentionally fry a working handset - not a cheap way to prove a point!).
I've had this problem now for a while and even sent my phone back to HTC for repair. It came back to me about 3 weeks ago and they said they fixed it. I never tested it when I got it back (stupid, I know!) and recently found it not working again. Today I hard reset the phone and found it worked but then didn't after installing Copilot SatNav. Bugger!
Does anyone have a solution to this that doesn't involve sending the phone back because when HTC reboot the phone they'll find that it works (surprisingly as no software will ghave been loaded!)
Any ideas?
+1 No WIFI + Camera + Strange USB connection (IT IS SOFTWARE)
+1 No Wifi, No Camera and stupid USB
The USB works I can flash from computer so it must work.
The USB dosnt ussually work unless flashing.
The Wifi just wont go/stay on at all
6.5 Roms there is no Camera Icon
6.1 Roms when the Camera Icon is hit, nothing happins
This has to be fixable by software, I know I can get the USB working and it is ONLY software as I can Flash it through USB, and in Bootloader it shows up USB when connected. Note:- Also my battery wont charge from USB, testing to see if its battery problem soon, but semi sure it is Software problem, as it will charge a little bit when left in Bootloader mode all day.
PLEASE PLEASE PLEASE HELP, I brought my phone from China (actually came from Belgium) and I am from Australia, don't wanna send my phone a million miles away to Europe.
Edit: USB seems to be charging under Energy Rom and (I don't know if this helps) 1.17.25.09 Radio.
Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
First of all, thanks Noonski to stop by to check out this thread
My rom is the official 1.56.405.1 WWE Wm6.1 ROM
Even wrlsmgr cant switch my wifi on.
My wifi worked initially then started niggling, the whole switch on, switch off thing, and now it doesnt switch on at all...
Oh and my reg key at the location is the same
{98C5250D-C29A-4985-AE5F-AFE5367E5006}\TNETW12511
I have tried quite a few roms now including doing MTTY task 29 to format phone and load new roms from sd card followed by 2 hard resets...
Ai, wouldn't know where to go for MTTY and hardware issues.
I do remember the Dying radio on the original XDA issue, so it's not improbable.
I'll make this temp Sticky to see if it get's some attention by others.
My WIFI is dead also....but thank god I got dataplan....but I still wished someone can solve it.
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Click to expand...
Click to collapse
Just to confirm that Blackstone Wifi has the same GUID as shown here above. My Wifi is still working, official stock ROM 1.56.401 WWE, radio version 1.13, no ROM or radio flashes performed so far (other than official ROM upgrade) ...
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
Thank you for stopping by. Without you guys, we will not be able to attract our gurus attention to this problem. By the way, Blackstone Wifi has the same GUID as shown above. My ROM is one of the EnergyRom 3.0 , radio version 1.14.25.24.
Just let me know what to do and I will start testing. Also I have working Blackstone around from which we can extract working EEPROm. Just give me tools and instructions.
I remember that I issued this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512
tabi13 said:
Seems to me that we can try the EEPROM fix if we find out the WLAN EEPROM address for the Touch HD.
Any experts here to shine a light on this?
Edit: Have been doing some more testing and when I try the emapiTest command in MTTY USB mode (with HardSPL 1.56) here is the output I get:
emapi init 1251 Test
1. Power on WiFi
2. Init WLAN SDIO interface
SD clk rate 19MHz
SD clk rate 144KHZ
SD Clk rate 24 MHz
6. DeviceID Test
eMapi1251 Read ChipID : 0x4B00
WLAN 1251 detect fail...
7. Write/read Test, block size = 512
[eMapiSdInterfaceTest] mismatch at 1!!!
eMapiSdInterfaceTest NG!
8. Interrupt Test
eMapiTestInterrupt WIFI_IRQ = 0
eMapiTestInterrupt FAILED!! intr active state = 0, non-active state = 0
Can anyone who knows what they are talking about shed some light on this?
Click to expand...
Click to collapse
I remember issuing this command on my phone and has exact output you've posted. I also rememer that I've done that on the working one and it has different output stating that wlan is OK and there was not any 7. Write/read Test, block size = 512
Noonski said:
To be sure it is not Software related.
Can people post their Rom
And the registry key
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CommManager\WLAN]
"DeviceName"="{98C5250D-C29A-4985-AE5F-AFE5367E5006}\\TNETW12511"
(note this is the Registry key for the Diamond Wifi to work directly, Blackstone Wifi could have another GUID)
Also try to locate the wrlsmgr.exe in windows folder and try to start Wifi with that default Windows CommManager.
I've seen other devices where the address in the WLAN key was wrong, and it would show the behaviour one user posted here, you see Wifi pop up a second or two but disappear again)
Click to expand...
Click to collapse
I find it very interesting that the Trinity has the EXACT same registry entry. Also, the exact same WLAN Radio. So, is there a different WLAN Radio that is having the same issue (I don't remember the Hermes one), or is it solely the TNETW12511 that has the issue? Would be nice to help narrow it down a bit.
Could it be that by using these dumped ROMs that we are inadvertantly flashing code for a different WLAN Radio that is corrupting our eeproms? Maybe there is a small part of code hidden within the DUMPS that still remains? Just some thoughts... This problem seems to be happening more and more since WM6.5?
But I also realize it may be happening more and more because more people are flashing now than ever!
I have same situation with WiFi on my HD.
I would like to say something, which could be useful for gurus.
Sometimes my phone catching WiFi after a few soft resets. 3-4 times and I could connect to WiFi network.

[Q] Can't activate Wifi.

Hi,
It make some week i had problem to activate wifi on my HD. On comunication manager, it try some second to activate it, but at the end it still desactivated.
I try to flash rom (some french rom, some english rom, wm6.5, wm6.1...). I try also a lot of radio rom (1.14,1.13,1.12,1.09) and hard reset, but it still doesn't work.
I installed Wifi Monster wich tell me that no Compatible Wifi adapter is found when it try to launch wifi.
If i find no solution i can try to send it to waranty (which mean i'll need to put off all cooked stuff..), but as i go to travel next week, i'd like to find a solution for don't have to use expensive data connexion.
Is someone have one brillant idea ?
Thx
dmnFR said:
Hi,
It make some week i had problem to activate wifi on my HD. On comunication manager, it try some second to activate it, but at the end it still desactivated.
I try to flash rom (some french rom, some english rom, wm6.5, wm6.1...). I try also a lot of radio rom (1.14,1.13,1.12,1.09) and hard reset, but it still doesn't work.
I installed Wifi Monster wich tell me that no Compatible Wifi adapter is found when it try to launch wifi.
If i find no solution i can try to send it to waranty (which mean i'll need to put off all cooked stuff..), but as i go to travel next week, i'd like to find a solution for don't have to use expensive data connexion.
Is someone have one brillant idea ?
Thx
Click to expand...
Click to collapse
Have you tried using wm wifi router or HTC wifi router?
I've moved your thread to general discussion as its not related to rom development
Hi,
thank for your answer.
I try both solution without result. On wm wifi routeur, on first startup, it said wifi was not found and ask me to select an interface. I had choice between TNETTW12511 and WWAN1. I try both, but don't work. I start connection sharing but don't see asociated acces point. (wifi stat is at 0db).
Same problem with the other softs...
no other idea ?
I use SD card flash method with olinex SPL 1.56. Is it possible the problem come to that ?
Sounds like the wifi chip is dead - lots of people have reported the same thing happening, and the only option is to send it back to HTC for a repair. We had it happen to one of ours - never found out what caused it, but the camera died at the same time.
The people who've had repairs and looked inside say the boards have been replaced, so it's not just a flashing/firmware issue. Some suggest the design is bad and the antennas are just too close to the chipset, but of course HTC won't comment on that idea.
Too bad.
I'll send it to htc when i came back and i'll use data til that, but it will cost a lot ...
BTW, thx for yours help !

Categories

Resources