hello
have anyone figured out how to make the ringtone rings earlier
im really messed up with this problem i really hate it
i searched all over the place and i got few solutions and the biggest was this :
http://forum.xda-developers.com/showthread.php?t=258109&page=2
and none of them was helpful .. please i need help
Yes, the cab works. If you want more information on what's happening, it's a registry tweak.
http://wiki.xda-developers.com/index.php?pagename=RegistryRingtoneScripts
Haven't tried looking for it, since the cab file "fixed" the "problem". The first ring will be "broken" as the phone wakes up and loads the phone app, but rings afterwards will sound fine.
And no, the ringtone does not have to be a wav file.
Oh, and use the "normal" file.
Well, had a look at the registry entry, and it's there. You can change your ringstyle to whatever you want by changing the script.
Kueh said:
Yes, the cab works. If you want more information on what's happening, it's a registry tweak.
http://wiki.xda-developers.com/index.php?pagename=RegistryRingtoneScripts
Haven't tried looking for it, since the cab file "fixed" the "problem". The first ring will be "broken" as the phone wakes up and loads the phone app, but rings afterwards will sound fine.
And no, the ringtone does not have to be a wav file.
Oh, and use the "normal" file.
Well, had a look at the registry entry, and it's there. You can change your ringstyle to whatever you want by changing the script.
Click to expand...
Click to collapse
oh thX for your answer
but im kinda new at this .. i donno what to do exactly
could u please explain a little.. i installed the normal cab and nothing happpend
no body ??
well i tried to do some things by my self and here what i did..
installing the normal cab patch .. editing registry which i found it like this "apw3r" i removed only number 3 which is now "apwr"
and still having the delay .. i need some1 who worked on this to tell me what to do !!
Related
When I receive a call, voice command announces it as it should, lowering the ringtone volume to announce over the top of it, problem is, it's reducing the volume too much, and I can't hear it speaking...
Does anyone know a way of:
a. Preventing voice command from lowering the volume at all?
b. Increasing the gain on voice command's announcements?
Any and all help is appreciated, thanks.
hah, when i used MS voice command my problem was that it didn't lower the ringtone enough.
I have no clue how to do what ur asking for, after a while i just turned my ringtone off and just had the announce of the name and number.
I got this CAB file from another post.
It did the trick for me.
Hi,
Start Menu->Settings->Voice Command
Choose Phone, then click Options, Remove checkbox to 'announce incoming calls'. Now your ringtone will rin normally.
--
NB
nextbond said:
Hi,
Start Menu->Settings->Voice Command
Choose Phone, then click Options, Remove checkbox to 'announce incoming calls'. Now your ringtone will rin normally.
--
NB
Click to expand...
Click to collapse
The problem is that I want the nice lady to announce the name of my caller, and I want the phone to play the ringtone I have set
MPIIIMan said:
I got this CAB file from another post.
It did the trick for me.
Click to expand...
Click to collapse
What does this cab file do? is it modification to Voice command, or is a simple registry hack?
Hello
Use any registry editor like resco and do the following
Goto current user
Then control panel
Then sound categories
Then voicecommand1
And change the atenuationcategory from 3 to 1
That will do the thing. The lady will be louder.
Theses suggestions seem to make little or no difference, the only change seems to be that the music isn't turned down as much.
I've tried manually making the changes, and running/instaling the cab file "MPIIIMan" presented me with.
Is there any way I can physically change the program to increase the gain? I don't mind if I have to dissassemble code or anything to make changes, but i'd like to get it sorted...
I'd use cyberon, but I can't find ANY working links for it on either Limewire, IRC, or any websites, either the full program or a demo... Has it dissappeared from existance???
i_am_impossible said:
Hello
Use any registry editor like resco and do the following
Goto current user
Then control panel
Then sound categories
Then voicecommand1
And change the atenuationcategory from 3 to 1
That will do the thing. The lady will be louder.
Click to expand...
Click to collapse
This worked for me. Made the lady louder - ringtone volume remained the same. Thanks.
BTW, I noticed there's another setting in that registry key called "initvol" and it's said to 5. My best guess would be initial volume? Anyone try playing with that to see what that does?
MPIIIMan said:
I got this CAB file from another post.
It did the trick for me.
Click to expand...
Click to collapse
Can you explain exactly what htis cab does, or maybe link us to its original post?
I got this cab file from another post.
You would have just as much luck finding it as I would.
I believe it's just a registry edit
[HKEY_CURRENT_USER\ControlPanel\SoundCategories\VoiceCommand1]
"AttenuationCategory"=dword:00000001
"InitVol"=dword:00000005
"Script"="p"
@=""
Hello and good day everyone....
I was wondering and hoping there is an option to change the sound of the screen tap option on the Sprint Touch or any PPC for that matter.
Maybe like a bursting bubble noise or gun shot even? Does anyone have a way to change the OEM click sound, or better yet have a .Cab file (noob here) that would make it so I can change the "click"?
Thank you for reading, and I look forward to see what any of you come up with.
P.S. I would like to thank the members of this site for making me "love" my phone or any smartphone again for that matter. What has been developed thus far has made my use of the phone a BREEZE! Thank you!!!!
To the top....
I also want to know!
I was trying to find if there is a .wav or that makes the default tap sound, but there is no file like that in /windows. If anyone find a way to change, plz post how to do it. Thanks in advance.
hwandsw.wav in \windows\ - also possible to change others there.
nocturne.op.15 said:
hwandsw.wav in \windows\ - also possible to change others there.
Click to expand...
Click to collapse
But how can we replace that file with our own customized one ? It prompts "access denied, file may already be in use"
...Hmmm
I actually used Resco and was able to replace that file with one of my own....., however I'm still getting the default screen tap sound.
Use WA2 or 3
Re: ...Hmmm
rockness724 said:
I actually used Resco and was able to replace that file with one of my own....., however I'm still getting the default screen tap sound.
Click to expand...
Click to collapse
Yeah, even i used Resco Explorer to replace the file, it gives warning initially, but then does the job. About replacin' the "screen tap sound" you gotta replace one more file in Windows:\ the filename is 'MenuPop'
Replace this file as well, with your own customized one, it'll get goin'
Adieu..
rohitsharman said:
Yeah, even i used Resco Explorer to replace the file, it gives warning initially, but then does the job. About replacin' the "screen tap sound" you gotta replace one more file in Windows:\ the filename is 'MenuPop'
Replace this file as well, with your own customized one, it'll get goin'
Adieu..
Click to expand...
Click to collapse
Nope... will not work. That's not the right files...
The hwandsw.wav and menupop.wav are the click and clucks you hear when tapping.
You might even try unchecking the screen taps under settings - sounds and notifications to disable the sounds.
rohitsharman said:
Yeah, even i used Resco Explorer to replace the file, it gives warning initially, but then does the job. About replacin' the "screen tap sound" you gotta replace one more file in Windows:\ the filename is 'MenuPop'
Replace this file as well, with your own customized one, it'll get goin'
Adieu..
Click to expand...
Click to collapse
Where can i get :
Resco File Explorer
Freeware Cab file
Have someone found a solution on how to change the screen tap sound on Touch?
I have changed the files mentioned above, but same sound when tapping screen.
I have a HTC Touch, slow device, i think a shorter sound with lower bitrate would make the tapping more responsive.
Turn off tap and button sounds on the device.
Soft reset the device.
Go and replace both files with the new ones.
Soft reset again.
Enable the tap and button sounds again. See if new ones are playing.
If not try soft reset once more and recheck.
unfortunately it doesn't work, have tried several times now, same sound
I confirm, if you try to play hwandsw.wav, you'll see that this one is not the screen tap. tried to play another files on windows dir, but havent found the tap sound.. could the file location and name be found on some key like screentap on registry?
Cook a new rom
hey just do these with the resco registry editor
get in HKEY_CURRENT_USER\control panel\sounds\
in that u will have registry for aqll the sounds and the path..........
just change the path to your wish......
but caution just changing hex values wrongly may damage your phone seriously!!
I looked at this some time ago, even if you replace the files in the Windows directory it doesn't change the sounds as it will use what is cooked into the ROM - to get around this you'd need to do as xd1936 suggested and cook a new ROM with the WAV files you want.
Alternatively:
I came across this thread on PPC Geeks some time ago and gave it a go: http://forum.ppcgeeks.com/showthread.php?t=49455
It involves some fiddling around with registry settings and from memory I did get it to change screen tap sounds but it changed other sounds too (I might have been in hasty in typing out the entries)
Hope that helps you.
(Full credit to signal34on PPC Geeks for this)
Doesn't the software "Toonality" change this? I mean you can change it though that program. Search for it.
I auto-soft reset my Touch at 2 am.
When the title screen for WM comes up that music wakes me up...
How do I disable the WM6 Startup Sound?
Thanks!
I found the culprit = PhoneOn.wav.
I tried deleting the Key for the .wav in HKLM\SOFTWARE\HTC\StartupAnimation
but did not work.
I also tried to delete PhoneOn.wav with Total Commander but its protected from deletion in some way....aaaaargh!
Please help
I would like to no how to. I do the same thing.
HKLM\SOFTWARE\HTC\StartupAnimation\Enabled
Set it to 0 for off, 1 for on.
slimshadee said:
HKLM\SOFTWARE\HTC\StartupAnimation\Enabled
Set it to 0 for off, 1 for on.
Click to expand...
Click to collapse
i tried that...no workie
Are the registry edits you making actually getting written? Are you powering off the device after making the edits or just soft resetting?
Verify that the changes are made after booting by reviewing the entries again.
slimshadee said:
Are the registry edits you making actually getting written? Are you powering off the device after making the edits or just soft resetting?
Verify that the changes are made after booting by reviewing the entries again.
Click to expand...
Click to collapse
Slim,
I rebooted and the entry is getting written. I then soft reset and that darn music is still playing -- are you on a Touch (Vogue)??
thanks
This worked for me
This is what I just did, seems to work fine.
1) Use Total Commander to search for the registry key which contains sound_on.
or browse to
\HKCU\ControlPanel\PhoneExtendFunction\CDMA\FlightModeOnOff\Sound_on
2) Change the content of that key from "SoundOn.wav" to "silence.wav"
3) Done.
I now get a nice and quiet soft reset. I'm using the HTC Touch / Vogue.
Leon.
Sorry dude, I am using a Tilt. I pulled the reg keys from the ROM kitchen I use to build my ROM; however, I HATE the stupid startup animation and sound, so I never cook it in to my builds.
The calls for your startup animation must be somewhere else.
Try ibloo's solution...I will look around a bit and see if I can find out why those reg edits I suggested don't work for you.
lbloo said:
This is what I just did, seems to work fine.
1) Use Total Commander to search for the registry key which contains sound_on.
or browse to
\HKCU\ControlPanel\PhoneExtendFunction\CDMA\FlightModeOnOff\Sound_on
2) Change the content of that key from "SoundOn.wav" to "silence.wav"
3) Done.
I now get a nice and quiet soft reset. I'm using the HTC Touch / Vogue.
Leon.
Click to expand...
Click to collapse
Thanks Leon - i used your idea and changed enable to "0" which accompplished the same thing = silence
Thanks i did the some and it worked.... SWEET. MY wife will love it lol.....
download shaps advanced config 2.1 n look in startup anim. setting set the value to 127 n its off
agentmikeyd said:
Thanks Leon - i used your idea and changed enable to "0" which accompplished the same thing = silence
Click to expand...
Click to collapse
Worked for me too; excellent!
Disable Startup Sound on WM6.1 Standard (Samsung i200)?
I looked up all the mentioned reg-keys but my phone don't have them!
Any idea?
The only thing I found was a OEM_startup.exe file in Folder windows\ but not in the REG...
SGH-i200 said:
I looked up all the mentioned reg-keys but my phone don't have them!
Any idea?
The only thing I found was a OEM_startup.exe file in Folder windows\ but not in the REG...
Click to expand...
Click to collapse
This is HTC related man! Hacking and developing. Not for i200!
FOR HTC PURE,
Here is how to replace the annoying AT&T startup noise with any sound file of your own choice:
Edit the registry at following location:
[HKLM\Software\HTC\HTCAnimation]
Change StartupWav to any other wav files.
Remember..
When you are making changes to the registry...
-exit the registry editor
-give it a good 10 seconds or so, then hit the power button (to blank the screen). This allows the registry settings to bake/get applied.
-Then, do a soft reset.
Else.. if you do it too quick, the changes may not apply/stick.
TheChemist187 said:
FOR HTC PURE,
Here is how to replace the annoying AT&T startup noise with any sound file of your own choice:
Edit the registry at following location:
[HKLM\Software\HTC\HTCAnimation]
Change StartupWav to any other wav files.
Click to expand...
Click to collapse
Hi Chemist
Found this one but what I really want is NO sound at all. How do I achieve that? Can I just remove the reference to the existing .WAV file or do I have to replace it with a .WAV that is empty, ie, no sound? If that is the case do you know where I can get hold of one or how I could make one?
Thanks in advance.
Balders
Baldrick1 said:
Hi Chemist
Found this one but what I really want is NO sound at all. How do I achieve that? Can I just remove the reference to the existing .WAV file or do I have to replace it with a .WAV that is empty, ie, no sound? If that is the case do you know where I can get hold of one or how I could make one?
Thanks in advance.
Balders
Click to expand...
Click to collapse
Here you go. Use this cab and it will give you no sound. For those that want to do it without a cab
[HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation]
"StartupWav"="\\Windows\\none"
zelendel said:
Here you go. Use this cab and it will give you no sound. For those that want to do it without a cab
[HKEY_LOCAL_MACHINE\Software\HTC\HTCAnimation]
"StartupWav"="\\Windows\\none"
Click to expand...
Click to collapse
Hi zelendel
Many thanks for both .CAB & manual version. My phone is now "quietly brilliant".
Cheers
Balders
To save me searching through the device does anyone know which sound to replace with silence to get rid of the new startup sound in new roms?
or even a reg tweak to disable it?
thanks in advance!
someone has got a cab here for it - best search as you'll only be told to do it anyway...
EddyOS said:
someone has got a cab here for it - best search as you'll only be told to do it anyway...
Click to expand...
Click to collapse
i always search before posting...
couldnt find anything mentioned... any idea which thread it may have been posted in? one of the tips ones or maybe one about the new 1.66 rom?
found the reg key:
HKLM\Software\HTC\HTCAnimation\StartupWav
doh... dont know why i didnt look there in the first place!
well hopefully this thread will help others searching for this
Here you go matey...
http://forum.xda-developers.com/showthread.php?t=622234
johncmolyneux said:
Here you go matey...
http://forum.xda-developers.com/showthread.php?t=622234
Click to expand...
Click to collapse
Cheers John.
I prefer not to use cabs though as i like to know exactly what i am doing when tweaking and would prefer not to decompile the cab to see exactly wtf is going on!
I take it that cab replaces the wav file all together?
If you didnt want to do this you can simply go to:
HKLM\Software\HTC\HTCAnimation\StartupWav
and edit the name of the wav file in that key ( i added a character to its file name so it would be easy to change back if needed.)
was just looking for your post! does it work properly? the stuttering tone at the mo is a tad annoying!!
EddyOS said:
was just looking for your post! does it work properly? the stuttering tone at the mo is a tad annoying!!
Click to expand...
Click to collapse
Yeah, tell me about it! What's the point of putting a startup sound if it stutters? It makes the whole device look cheap right from its first powerup.
All my cab does is replace the wav file with a tiny silent one, therefore saving precious ROM space. It works fine for me, and I've not had any complaints so far.
Where is startup tone located?
Hi
Could someone tell me which folder the startup tone is located? I wanted to replace it with my own wav.
Thanks
Audio Oblivion said:
Cheers John.
I prefer not to use cabs though as i like to know exactly what i am doing when tweaking and would prefer not to decompile the cab to see exactly wtf is going on!
I take it that cab replaces the wav file all together?
If you didnt want to do this you can simply go to:
HKLM\Software\HTC\HTCAnimation\StartupWav
and edit the name of the wav file in that key ( i added a character to its file name so it would be easy to change back if needed.)
Click to expand...
Click to collapse
The edit of the name is how I did it and it works fine.
As mentioned in the subject. Am new to wp7 on hd2. Wanted to know if there is any way I can stop my hd2 going haywire vibrating every time i click on a folder in touch explorer or registry editor or advanced config ..etc ..etc. etc .... And is there anyway I can increase the lousy in call volume..Its really getting to be an issue...I can hardly hear or make myself be heard while talking on the phone which kinda screws up the point of having a cell in the first place.... Why are there no options for editing the in call volume , media volume and ringtone separately as in android??? Help will be appreciated ... Thanks
irteza_h said:
As mentioned in the subject. Am new to wp7 on hd2. Wanted to know if there is any way I can stop my hd2 going haywire vibrating every time i click on a folder in touch explorer or registry editor or advanced config ..etc ..etc. etc .... And is there anyway I can increase the lousy in call volume..Its really getting to be an issue...I can hardly hear or make myself be heard while talking on the phone which kinda screws up the point of having a cell in the first place.... Why are there no options for editing the in call volume , media volume and ringtone separately as in android??? Help will be appreciated ... Thanks
Click to expand...
Click to collapse
I am having the same issue. Found a sound.fix cab file, but cant figure out how to install it. Put it in my documents and clicked through touchexplorer, but no luck so far.
I'm having the same issue, has anyone figured out how to fix this?? Thanks.
Bareslehm said:
I am having the same issue. Found a sound.fix cab file, but cant figure out how to install it. Put it in my documents and clicked through touchexplorer, but no luck so far.
Click to expand...
Click to collapse
with WP7 Update Cab Sender
http://forum.xda-developers.com/showthread.php?t=1250869
but dont except this solved your problem...
So, no solution to the awful crackling sound of some ringtones (not all of them). I am running the HD2O 2.00b ROM and has been running flawlessly in all other aspects.