Related
Is there a location we can go to to see if Cricket supports evdo revA in our markets? I get the symbol for 1X with a download speed of 932 kbs today. I guess another question is is there something we have to do to get revA? I am using DCD 3.2.6 with the data cab installed
Thanks
I would look at their coverage map. I am in the Portland OR area and it says that we are on a 3G broadband network. Makes sense as that is what my Motorola phone says "3G". You can always chat with their help desk. Maybe they might know, (good luck).
I was running CM 5.0.6 on my N1 for several weeks along with the 4.04.00.03_2 Radio to try to solve some of the preference for EDGE that my TMO N1 had. The problem that I ran into was that I went from some HSPA to none in areas that I know are covered by HSPA. I would constantly use only UMTS! I just flashed Kang-O-Rama 0.8 which requires the FroYo radio and presto, either the base CM 5.0.8, Kang-O-Rama 0.8, or more likely the 4.06.00.12_7 Radio fixed my problem. In fact, I am now getting 2000-3000 kbps down and my phone seems to prefer 3g down to 1 bar where as before it would stick on EDGE until I forced it to WCDMA Only.
Just thought I'd post some good news about the new radio(possibly the radio that is).
Rick
I've never gotten more than 1mb down how can I tell if the phone is going into HSPA I'm running stock froyo and it only shows 3g before when I had CM it showed an H for HSPA
yiannit said:
I've never gotten more than 1mb down how can I tell if the phone is going into HSPA I'm running stock froyo and it only shows 3g before when I had CM it showed an H for HSPA
Click to expand...
Click to collapse
Yeah, that's a bummer with the stock ROMs. Here's what I do to make sure that a relatively long data sesion is opened. Start a streaming app like Pandora or download a large email (i.e. with a 3meg picture) and then goto Settings -> About Phone -> Status and scroll down to Mobile network type. This should show either UMTS(if you are in 3g but no active data connection) or hopefully HSDPA if you ahve an active data connection.
There are other ways to tell, but this is what I do.
Rick
rickh925 said:
Yeah, that's a bummer with the stock ROMs. Here's what I do to make sure that a relatively long data sesion is opened. Start a streaming app like Pandora or download a large email (i.e. with a 3meg picture) and then goto Settings -> About Phone -> Status and scroll down to Mobile network type. This should show either UMTS(if you are in 3g but no active data connection) or hopefully HSDPA if you ahve an active data connection.
There are other ways to tell, but this is what I do.
Rick
Click to expand...
Click to collapse
Edit. 10 chars
It wasn't really stock it was pauls version, now I'm running kangs .9 and no change
Actually I ran speed test and it did switch rio HSDPA but only 430kbps
I got it last night with the FRF85B, and my N1 seem to be staying in 3G more consistently today
After I went to FRF83 my reception went from only edge in my house to full bars of 3G. Reception has improved more than I could have hoped.
yunlin12 said:
I got it last night with the FRF85B, and my N1 seem to be staying in 3G more consistently today
Click to expand...
Click to collapse
bryaslak said:
After I went to FRF83 my reception went from only edge in my house to full bars of 3G. Reception has improved more than I could have hoped.
Click to expand...
Click to collapse
You guys want to tell us what city & carrier?
Hi, I have a problem that I suspect is an isolated situation, nevertheless, it has been bugging me for over a month now. Hopefully the community will have some insight.
I will try to report the problem in it's entirety:
I do have a shortcut on my desktop to Phone Info (*#*#4636#*#*). From here, the thing I note of interest is the CID, which I guess is the tower ID that my phone is currently connected to. Also of note here are the ASUs, which I'm not quite sure what they are, but they seem to correlate with the number of bars being reported (ie more asu = more bars).
I also use Hello IM (AIM app from the market) heavily, and I have "Show notification icon" enabled, so it works fairly well as a visual indicator of connectivity, or lack thereof.
Ever since I upgraded from Super D to an Eclair rom, I've had problems with 3G handoffs on Tmo. Basically, whenever my phone switches from Edge to 3G, or one 3G tower to another 3G tower (different CID in Phone Info), the connection times out. I see the infamous "up arrow but no down arrow" activity on the 3G icon in the notification bar. This happened just about everywhere I went.
About a month ago, I decided to upgrade the phone radio, from 2.22.19.26I to 2.22.23.02. For one reason or another, this completely solved my problem. I had no problems with handoffs, 3G just started working again.
A couple weeks ago, I downloaded CM6 and tried out Froyo. The first thing I notice is the weak signal on my radio. Before flashing the rom, I did a nandroid backup, and I know I had 3 bars of 3G signal where I set the phone down. After the flash, my phone had no 3G signal, and for some reason refuses to switch to edge; so my signal indicator is sitting there with an X over it. After some time, it finally does pick up a 3G signal--this is where it begins to get weird...
My 3G works right now, for the most part. There seems to be 2 very specific locations where it does not work. As mentioned earlier, I am able to check CID's through the Phone Info menu. I notice 2 CIDs where my 3G connection times out. By time out, I mean an apparent loss of data (ping doesn't work in Phone Info). This happens every time I am connected to these 2 towers. As soon as the phone switches off to another tower, data works fine again. The strange part is, even though I am not getting data, the asu and signal bars continue to move up and down as if I have a normal signal. The phone also makes no effort to switch back to Edge, even though 3G data is completely stalled (Hello IM shows as disconnected, ping fails).
This started happening since the CM6 update, and have persisted since then. Even after I did a nandroid restore back to my previous rom (Super E 1.02), the radio problem remains. Before CM6 and after I updated my radio, I had no problem connecting to these same towers.
In a nutshell:
3G does not work when I am connected to 2 specific towers since CM6 update
Phone makes no effort to switch to other 3G towers or Edge when connected to these 2 towers
When connected to these towers, signal strength continues to go up and down as normal; usually hovers at a consistent 2 to 3 bars with the stock signal indicator (4 bars max).
Currently I have tried flashing all the Eclair roms available, as well as my old Super D rom (still using 2.22.23.02 radio). Problem remains.
Does anyone have any idea what's going on?
Ok so I have been messing around with the evo and doing a new rom for the whole cricket thing.
One thing i have noticed while doing this is that the EVO DOES NOT drop down to 1x at all. So i decided to write a 1x PRL to the phone. The phone reports that it is ON 3G network. This is not possible and I think that is wrong. Sprint has the phone reporting that it is 3G even though its on a 1x network.
If his has been discussed please let me know thanks.
amoamare said:
Ok so I have been messing around with the evo and doing a new rom for the whole cricket thing.
One thing i have noticed while doing this is that the EVO DOES NOT drop down to 1x at all. So i decided to write a 1x PRL to the phone. The phone reports that it is ON 3G network. This is not possible and I think that is wrong. Sprint has the phone reporting that it is 3G even though its on a 1x network.
If his has been discussed please let me know thanks.
Click to expand...
Click to collapse
Sorry to deviate from your original message but is there a way to force 1x? I'm assuming 1x uses less energy than EVDO/3G; so if true, it would be beneficial to switch to 1x when idling/display is off. Maybe tasker or juice defender already does this?
Edit: On CM6 I hit 1x from time to time. At least the status bar reports it as 1x. Could be a Sense/HTC bug.
Edit 2: It seems that Android doesn't have a API for 3G/2G toggling. Sucks.
No your fine, Yes CM does go to 1x. This isnt based off a sprint rom. Its not a HTC Sense issue because I had ported a incredible rom a while back to the phone and it would drop to 1x. I just tried a new port for 2.2 from the incredible and its doing the same thing.
It is possbile that it could be a HTC Sense Bug in the 2.2 Froyo. But i really think that Verizon and Sprint are not wanting it to drop to 1x. Wich i think is wrong.
The way i forced it was to load a 1x PRL on the phone.
I'm connected as 3G "False" as i checked the speed now and I only got 39.62kb wich is far from the 1565.1kbs i checked before switching PRL.
Maybe you already knew this, but I'm pretty sure that for a 1xRTT network the 3G icon in stock htc sense roms simply greys out. At least that's what I remember seeing in the manual. When the phone is connected to 3G the icon turns white.
I don't know - I'm almost positive that I've seen a 1x symbol in my status bar instead of 3g a few times. It's been a while though...
Well from what i see thats not true.
Im on 1xRTT right now. The icon is a solid white.
Even if that was the case and it should grey out. That is completely deceiving. It should accurtly show it is on the 1x network.
amoamare said:
Well from what i see thats not true.
Im on 1xRTT right now. The icon is a solid white.
Click to expand...
Click to collapse
sorry - who was this to? Also, I know there's a 1x symbol in the framework - it's got to be there for a reason, right?
OK I just checked the manual and it has a 1X icon. You're right.
Edit: The com.htc.resources.apk where sense signal icons are located contains the images for 1X so maybe it's something in the xml's that prevents the phone from either correctly notifying a 1X signal or bypassing the connection all together. HTC obviously intended for the phone to connect to 1X if they took the time to sensify the images. Strange.
Yes HTC intended for it but thats not the case. Has anyone on sprint successfully dropped to a 1x Connection ? Here is what I notice if im not forcing a 1x connection.
If it looses a 3G connection, it does not successfully drop to 1x. It just looses 3G all together then tries multiple times to go to 3G if it doesn't succeed you loose internet.
If you have a 1x prl it loads 1x but shows its a 3G connection wich is not true at all. This is disappointing.
amoamare said:
Yes HTC intended for it but thats not the case. Has anyone on sprint successfully dropped to a 1x Connection ?
Click to expand...
Click to collapse
ummm...yeah - like I said in my prev post, I've seen the 1x icon appear on my phone in parts of nj where I wasn't picking up 3g.
What ROM are you using ?
OK Im going to grab my friends Evo tonight that is on a sprint a force a 1x connection and see if his shows accurately or not.
I assume your custom PRL is forcing a 1X connection on sprint towers and not verizon or something? The phone may only show a drop to 1X if on sprint's network. If you are on verizon or cricket or something it probably wont indicate 1X.
amoamare said:
What ROM are you using ?
Click to expand...
Click to collapse
I was either using stock, or an older version of baked snack.
Its not a custom PRL the one im using is a cricket prl. Made only for 1x network. It does not support EVDO.
Sprint has a few 1x PRL's only and I will load his phone with it and test it.
That doesn't make sense. The phone being on cricket or any other service would not make the phone report its on 3G all time. I flash a lot of phones to cricket. Like i said before this is a Sprint Rom issue. I loaded it with a incredible ROM and it successfully drops to 1x connection.
fachadick,
You might have been using baked snack rom.
Im checking tonight with the service on sprint.
So far its confirmed.
Two people with HTC EVO's on sprint.
One (Me) on with evo on cricket.
We forced all three EVOs to work on 1x connection only. All three of them are showing 3G icon but are only getting 1x speeds. This is very deceiving.
amoamare said:
Its not a custom PRL the one im using is a cricket prl. Made only for 1x network. It does not support EVDO.
Sprint has a few 1x PRL's only and I will load his phone with it and test it.
That doesn't make sense. The phone being on cricket or any other service would not make the phone report its on 3G all time. I flash a lot of phones to cricket. Like i said before this is a Sprint Rom issue. I loaded it with a incredible ROM and it successfully drops to 1x connection.
Click to expand...
Click to collapse
The reason I say it might not work on a PRL from another carrier is because when I am roaming I get a triangle above my reception, but the data icon remains 3G if I remember correctly. The actual data connection is only 1X because of roaming agreements, so what I am theorizing here is that the phone only changes to 1X when you are on an authentic sprint network and the connection drops to 1X. This is probably built into the rom, which is why it works for other phones, but not the EVO.
Because you are using a "roaming" PRL, I would think that the phone doesn't trigger the change to 1X icon just like actual roaming with a Sprint PRL. That's my hunch.
Yes i understand what you are saying, and yes that is plausible.
But doesn't explain why when we force the sprint ones they do not change to 1x ? I can force any other phone to 1x on the sprint network.
Anyone having any luck with Roam Control on EG22? I'm running the EG22 w/ EG22 modem. Everything looks to be working fine except for one huge glaring problem...roaming. I have all the roam guard nonsense turned off. I hit Roaming Only, I get the little triangle and even see it in the debug connected to VZW but I never get any data connection. I've tried rebooting, etc.
I would love to hang out on EG22 but without roaming this thing is worthless to me. At work I have to force roam since Sprint data has been dead downtown for over a year.
Works fine for me
remember, data won't show if you're connected to 4g or wifi.
LunaticWolf said:
Works fine for me
remember, data won't show if you're connected to 4g or wifi.
Click to expand...
Click to collapse
Hmm... no 4G or WiFi here. It just shows the triangle with the signal meter, but of course there is no data connection.
I flashed the DEODEXED version by decadance. What version are you using? are you using the EG22 modem? I haven't tried to flash an older modem yet.
Make sure you have data enabled. hold the power button and then click data network mode.
Tried with rc 1.4 and it worked, the 3g data symbol doesn't show up till you request for internet. Both time I tried took 1 min to handshake.
I am using prl 11114 and my suppose to be 3g data roam speed is at cdma speed dl is caped around 120kbps on verizon full signal bar.
Sent from my SPH-D700 using XDA App
the newest RC works for me, but the modem crashes and reboots every time I go into roaming, but it reboots into roaming fine so I haven't really worried too much
I checked all that. It just doesn't handshake for some reason. I remember this same issue on the very first Froyo leak. Weird thing is I tried the roaming on the very first GB leak and it worked just fine.
I'll have to flash around some modems, try a different release of EG22 and see if I can get this working. This feature is a huge must for me.
Got it working... ODIN'd to this version of GB and it worked first shot. WOOHOO!! Loving it.
http://forum.xda-developers.com/showthread.php?t=1184134