Help please. Can't bootup. Stuck on red green blue white screen - Mogul, XV6800 General

Hi,
I seem to be stuck on
TITA100 MFG
SPL-2.40.01ipro
CPLD-9
all in red
green blank
blue blank
white has the word Serial in it.
When I try and reset, etc. I can see "Loading..." and then quickly it says image file "No image File" and then gets stuck in above. Can't turn off, only can take battery out to save display. Any help would be greatly appreciated.
Thank you.

Have you tried to re-flashing a ROM to it?

http://wiki.xda-developers.com/index.php?pagename=TitanProblems
Third question down.

hold down your power buttoon and soft rest at the same time this shold get up out of bootloader mode

Related

neon300 stuck in tricolor

dropped my touchdual and the battery popped out. when i went to start it back up it went to the tri color screen and says "serial"
i tried a hard reset but the it does nothing past the this will erase your data screen.
help.
please.

[q] android bot then black screen with strobe light flashing

HI
I have managed to flash in flashmode the recovery file and other that was mention in other post successfully on windows 8
did Fastboot Reboot and phone rebotted to android bot with progress green bar under him then went to lit black screen with green strobe light that lights up and dims out .
I can use power plus volume down and then press power twice but this just shows android bot and goes to black screen again
I have flash uk open d802 kdz file but still fails at 49%.
I can not access recovery at all and don't seem to get back into fastboot mode.
any help would be great been stuck for days .
don't want to take it into the shop to be fixed if I can do it for free.
anybody got any good ideas would be great . I am new to all this and some times don't understand certain things .

I messed up!

hello everyone. i would like to say i think i permenatly bricked my phone. it is a D803.
i decided to flash a rom for a 802.
well all the touch functions were out of wack i had to tap middle of the screen to hit the home button ect...
so i decided to use R & D flash too and i used a 802dll and 802sea.tot file and flashed. all seemed fine until about an hour passed and it was still on LG screen flashing blue and green LED
i tried to put into download mode but it just hangs when it starts download mode where it shows the two little computers with the blue dots between them. i also tried recovery method but it just shows and android then a line of blue and restarts... then it goes to LG screen and keeps flashing blue and green. and i dont even get fastboot mode eaither........ so please can any1 help me out?? now my phone does not boot but as soon as i see the LG screen it comes up in device manger as port 13 or 41 whatever usb i put it on. but the phone is still on LG screen.
any ideas please any1
thanks jesse

Phone not booting - LED blinking in red and green

Hey guys,
I wanted to remove the inscription that pops ups while using this thread: https://forum.xda-developers.com/axon-7/themes/remove-inscription-loader-unblocked-t3605213. My phone wasn't encrypted, but after flashing the zip my phone just wouldn't boot and froze at the boot animation. The screen turned black and the LED started blinking red en green. Does anyone have an idea how to fix this and what the problem is exactly?
Thanks a lot!
cedric2219 said:
Hey guys,
I wanted to remove the inscription that pops ups while using this thread: https://forum.xda-developers.com/axon-7/themes/remove-inscription-loader-unblocked-t3605213. My phone wasn't encrypted, but after flashing the zip my phone just wouldn't boot and froze at the boot animation. The screen turned black and the LED started blinking red en green. Does anyone have an idea how to fix this and what the problem is exactly?
Thanks a lot!
Click to expand...
Click to collapse
I don't know if you can't fix the phone in that state. The only hope you have is that you can enter EDL mode by 4th category brick repair manual. There is another way that involves draining the battery and attempting to enter FTM mode (vol down and power) but only a couple of people seemingly could do this.
You had been warned on that thread anyways.

Help! Update failed. Now I have Black screen with stripes

I wanted to update my mothers P8 lite, but somehow the update failed. it doesn't show the logo anymore when it boots. Now it shows a black screen with stripes, it even shows stripes when I boot to fastboot or even recovery. I wonder if something is wrong with the display driver. But the phone seems to work when its boots to the system. I can hear the volume sounds when I press the buttons, only the screen is still black with white stripes. I wonder if something is wrong with the display driver.
I tried to use the huaweiextractiontool and flash the individual img. files trough fastboot of different firmwares. Exept the the display the phone seems to work normally I can still boot into fastboot, and I hear the sound when booting. But its the still a black screen with stripes, and every frimware gives a different stripe pattern.
Any idea on how to fix this?
Greetings.
Problem solved
I solved the problem by flashing agian the last working firmware. And My mashing the volume buttons agian, it booted in recovery and the screen is restored agian.

Categories

Resources