HI
I have managed to flash in flashmode the recovery file and other that was mention in other post successfully on windows 8
did Fastboot Reboot and phone rebotted to android bot with progress green bar under him then went to lit black screen with green strobe light that lights up and dims out .
I can use power plus volume down and then press power twice but this just shows android bot and goes to black screen again
I have flash uk open d802 kdz file but still fails at 49%.
I can not access recovery at all and don't seem to get back into fastboot mode.
any help would be great been stuck for days .
don't want to take it into the shop to be fixed if I can do it for free.
anybody got any good ideas would be great . I am new to all this and some times don't understand certain things .
Related
My son's Vega had Vegacream installed and was working fine until this afternoon, when it wouldn't turn back on, I could only get the backlight to show for a few seconds, then just a black screen. I had to hold the power button for 5 secs to reset it, only to get the same backlight for a few seconds then black screen.
I've made sure I had all the correct drivers installed using AUDI, and I can get the tablet into nvflash recovery no problem and reflash roms. I've tried reflashing vegacream, no difference, just backlight then black screen again. I've also tried reflashing vega moddedstock and original stock 1.10, it says they've flashed correctly in the dos window, but they just show the green android logo for a few seconds, then black screen again, and I have to hold power for 5 seconds to shut it down, then it just boots to the android logo again etc etc etc.
I know there are loads of posts already about Vegas that won't boot, and I've read lots of them , but I can't seem to find a solution to my problem.
Any help and advice would be greatly appreciated, my son is badgering me every 5 minutes, is my tablet fixed yet Dad?!
hello everyone. i would like to say i think i permenatly bricked my phone. it is a D803.
i decided to flash a rom for a 802.
well all the touch functions were out of wack i had to tap middle of the screen to hit the home button ect...
so i decided to use R & D flash too and i used a 802dll and 802sea.tot file and flashed. all seemed fine until about an hour passed and it was still on LG screen flashing blue and green LED
i tried to put into download mode but it just hangs when it starts download mode where it shows the two little computers with the blue dots between them. i also tried recovery method but it just shows and android then a line of blue and restarts... then it goes to LG screen and keeps flashing blue and green. and i dont even get fastboot mode eaither........ so please can any1 help me out?? now my phone does not boot but as soon as i see the LG screen it comes up in device manger as port 13 or 41 whatever usb i put it on. but the phone is still on LG screen.
any ideas please any1
thanks jesse
Hello!
I'm having trouble with my LG L7 (p700).
Some weeks ago I installed a rom, and after that it stopped working.
For now on, when i press the power button the screen lights up but stays black. And when it's charging displays a battery icon with the charge percentage.
I tried a lot of times using KDZ to flash a stock rom but it doesn't finish the flashing, or sometimes my pc crashes with a BSOD after some time with the KDZ program opened.
Also, using any combination of buttons doesn't do anything besides the light up black screen or turns off the phone, i can't acess cwm recovery, or even emergency mode, it's always a black screen.
Please someone help me, i really need to use the phone.
Yesterday I've update my CM on my Nexus 4.
During update, my n4 restart and get in bootloop ( see google logo, after that Display starts to blink bright and dark)
I can get into fastboot mode, but if I choose recovery mode, same problem appears. (google logo, after that display starts to blink bright and dark.
Anyone idea what I can do?
Thanks
Try reflashing a stock rom.
I wanted to update my mothers P8 lite, but somehow the update failed. it doesn't show the logo anymore when it boots. Now it shows a black screen with stripes, it even shows stripes when I boot to fastboot or even recovery. I wonder if something is wrong with the display driver. But the phone seems to work when its boots to the system. I can hear the volume sounds when I press the buttons, only the screen is still black with white stripes. I wonder if something is wrong with the display driver.
I tried to use the huaweiextractiontool and flash the individual img. files trough fastboot of different firmwares. Exept the the display the phone seems to work normally I can still boot into fastboot, and I hear the sound when booting. But its the still a black screen with stripes, and every frimware gives a different stripe pattern.
Any idea on how to fix this?
Greetings.
Problem solved
I solved the problem by flashing agian the last working firmware. And My mashing the volume buttons agian, it booted in recovery and the screen is restored agian.