Related
Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Is the 1.35 Rom different from?:
http://forum.xda-developers.com/showthread.php?t=294927&highlight=issues
The HTC ROM 1.35 is different from the cingular ROM 2.06, it's supposedly the most stable of the ROM upgrades or so they say!
I haven't any issue, Radio & ROM 1.35 ... i've read someone has problems with messaging service...
Using a Task Manager ONE TIME only i've seen the Messaging Service stopped, just a reboot.
now works well, bt, wifi & radio
and what happend, when you try to change the very first contact on sim? I had similar problem, but on old nokia phone, not windows nor symbian.
gfreek said:
Thought I'd start a thread where people can post there issues/bugs on ROM upgrade 1.35 and it will also help people to make an informed decision before upgrading to this ROM.
I have now used this ROM on my SPV M3100 for over several weeks and the only issue I have is when using my 3 network USIM the voicemail speed dial 1 does not work even after going through the settings or registry the bizzare thing is I don't get this issue with other network SIM i.e. O2, Orange or T-Mobile.
P.S. before someone says I may have a faulty 3 USIM, I did not have this issue prior to this upgrade.
Click to expand...
Click to collapse
Would the HTC 1.35 ROm work on the Cingular 8525?
loud busy tone even if Phone is on loudness=0
i have some problems with this Radio 1.35.00.11. The thread is about that, isn´t it?
First of all my phone beeps loud out of the speaker at the back(the loud one for "free speaking") if the Person iam calling is not available (busy signal). Even if the Phone is turned to loudness 0! Iam not sure that the Radio Rom is responsible for that, because i reseted my vario2 completely. But iam sure that problem i never had before(with the german origninal Radio ROm).
*edit* iam currently reading that this is not a problem from the Radio Rom... The extRom may be responsible. Sorry!
But please help me the following Topic:short: is it possible to flash to an older RadioRom?
*/edit*
Because of that i wanted to flash the 1.27. Radio ROM to the Vario2. I took this one: ftp://xda:[email protected]_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe
The flashing procedure got complete without any error, but on the Vario iss still the 1.35.00.11! Isn´t it possible to flash to a older Rom Version?
Thanks for help!?
Hi im new so if break any rules sorry. I have SPV M3100 with blackdiamond on it, unlocked, but when i want make a call phone starting connecting and after 2 sec break connection. Also if someone call to me they can't. Please help me. Sorry for my language im Polish and my english writing skills are not very good
is that mean that i can't get any help and i may throw out my phone. please if anybody have idea. that is on my phone ROM version Black Dymon ROM Date 01/04/07, Radio version 1.41.00.10 Protocol version 32.74.7020.18H
No this doesn't mean you have to throw your phone out. You just have to be a little more patient.
The people who use this forum aren't all from the same timezone and don't all have the ability to read this from work so it may take a couple of days to get a response.
I haven't done what you have some unable to help. Just don't get despondant that have you haven't had a response yet.
I've heard mixed reports of the 1.41 radio - some good and some bad. I tried 1.41 but eventually went back to the 1.38 radio because it is the most stable in many of the countries I work in. I didn't use the 1.41 radio in Poland but did have problems with it in Czech republic which is why I downgraded.
There are reports of dropped calls for this radio in this thread http://forum.xda-developers.com/showthread.php?t=303378 so it may be a good idea for you to read through that.
Personally, I'd drop down to radio 1.38.00.10 - get it here http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms,
BUT before you change the radio, make sure you have Hard-SPL 2.10 http://forum.xda-developers.com/showthread.php?t=296722 because this will help you recover your phone if something goes wrong.
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Scotland
der_Tiger said:
It's still the same my phone can't make a call always drop after few seconds, i change ratio on 1.38.00.10 and 1.38.00.01 latest UK because I'm in Scotland right now and still is the same, meaby there is a chane to clean everything and upload on my spv again, if yes please for a tip how to do thant, or any difrend idea? Please help me because i start losing my mind and i have latest hard SPL by the way.And alsow i have reception on my phone everything sims ok but i can't make a call.
Click to expand...
Click to collapse
Hi der_tiger,,, I've been playing about with black Dymond and various Radios in Scotland with varing results.. IMHO generally all the 1.4# radio Roms had issues with missing calls dropping radio signals etc.. I've reverted back to 1.38.00.10 as it seams the most stable for us in jock-land.
Once you've reflashed your rom I would recommend you reflash black Dymond, I always get a more stable system by reflashing the System ROM "AFTER" i change the Radio rom.....not sure why.
Oh one other thing I noticed, this might just be an Orange thing, but If I manualy select the network ie in my case Orange rather than the phone Auto selecting networks I don't get any issues with signal drop-outs !!!! go figure !!
anyway hope this works for you too
Hi it's me again i have big favor to you mates. Can someone may send me on my e-mail [email protected] his own rom an configs from SPV M3100 with working in UK, please because i try everything and my phone still don't wand make a call.
After upgrade to WM6, every time I call or receive the call, the phone will be disconnected.
Anyone has same experience ? And still, the keyboard can freeze if I want to reply a SMS directly I must go back to main menu, open the SMS, then reply.
Same experience here..tried all ROMs but same..
I have been facing exactly the same thing, as far as the Radio at least. I have also tried all sorts of different ROMs, even Radio versions but with no difference. Basically, out of nowhere i find out that my mobile cannot be reached for like hours, although it shows normal reception, until i try to make a call...then it gives me "Operation Failed" and loses the signal...only to start working normal again.
Could this be the beggining of the End for my Hardware or just firmware guys???
Tank you all..
The same thing i have. TyTN lose the signal while the phone call.
ROM: Storm v2.10
Radio: 1.54.30.10
Try this people!!!
I have flashed my TYTN with the original ROM WM6 from HTC below(comes with Radio), and it seems all WELL.
PS: The original WM6 is not the best looking but at least i get to make and receive calls with intergrity now.
http://forum.xda-developers.com/showthread.php?t=316726
@ALEX_STAMOS
What the different between ROM from HTC and from I-mate itself ?
Thanks
ALEX_STAMOS said:
I have flashed my TYTN with the original ROM WM6 from HTC below(comes with Radio), and it seems all WELL.
PS: The original WM6 is not the best looking but at least i get to make and receive calls with intergrity now.
http://forum.xda-developers.com/showthread.php?t=316726
Click to expand...
Click to collapse
Ysut, one has HTC flash screen and one has Imate screen.... Other than that its probably just a few different 3rd party apps( in oz Imate is geared up for Telstra as they distribute Imate phones)... Still badly bloated with network crap. Cheers...
UPDATE!!
It seems that a solution for the problems has been found for:
- Reception difficulties
- BAD gsm performance
- No reception on the phone
http://forum.xda-developers.com/showthread.php?t=389601
Please go to this URL, read it, upgrade your broken polaris device and respond in the poll that it either worked for your or didn't
----------
Hi guys,
after upgrading my Polaris from the default supplied rom 1.58.21.23 to the latest 1.64.08.21, I have no reception in my house and even difficult reception on the street.
I reversed back to version 1.58.21.23, but even then, still have issues with reception.
Does anybody have the same problem, or had the same problem and find a fix?
Rroet
Hello,
I do have the same problem, and got it on the same way as you did?
could someone please help us?
Do you have the same difficulty as I do:
I've followed the procedures as described in manuals everywhere:
- remove the memory card
- be happily synced
- start app
- device goes into the tricolor screen
- replug the usb as described on the polaris screen
- Flashing startssss.... goes... goes...
- HANGS at 99%
- Have to do recovery procedure as shown on screen.
- Flashing procedure starts second time
- hits 100%
- Now i've got a bad reception? On my previous polaris (replaced due to a phonespeaker defect) had 2 bars even after upgrading. My new Polaris doesn't have any bars after I upgraded (It did have 2 bars before upgrading)
Any expert here with information?
I'm having the same issue, by upgrading RADIO 1.58.21.23 to the latest 1.64.08.21 I got weak signal on GSM. Two bars on signal icon on the top near the BTS.
I'm using BEPE 0.67 ROM with WM 6.1, downgrading the RADIO doesn't help. I have searched thru this forum and didn't find any relevant solution
I was having the same problem with you. I have tried everything including flashing every rom/radio available and performing hard resets at every stage. Unfortunately, in the end I had to get my cruise replaced.
These are my original Cruise details, just to see if there is anything in common:
HK Traditional Chinese HTC Cruise
1.27.832.1. CHT
01/10/08
1.58.21.23
25.65.30.04H
Very interesting issue
I read this several times in different threads now.
Fortunately myself doesn't suffer this issue and i have
also upgraded to 1.64.08.21. Lucky one.
Maybe one should start a poll about this
Would be nice to know the results.
Olioaglio
I have this issue too after Hard-SPL and ASerg Rom, I have problems in o2 German network... very weak signalstrength 1/4 or mostly 0/4 (no network, denied).... i tried original radio 1.58.21.23 and 1.64.08.21 any1 know what could have happened? can a rom upgrade damage the radio hardware in any way? would be hard to believe... with german's BASE i have at least from 2/4 to 4/4 signal strength and sometimes I even get 3G... in my old o2 orbit (artemis) everything is at max strength
I have the same problem after flashing the 1.64.08.21 radio. Is there no solution?
I guess I am lucky, but with 1.64.08.21 and Bepe's 0.67 ROM I don't have any problems. There is no change at all. Signalstrength is the same, 3G is working fine.
1.64.08.21 and Bepe's 0.67 ROM
Me too
I have the o2 orbit 2 (POLA200)
Rroet said:
after upgrading my Polaris from the default supplied rom 1.58.21.23 to the latest 1.64.08.21, I have no reception in my house and even difficult reception on the street.
I reversed back to version 1.58.21.23, but even then, still have issues with reception.
Click to expand...
Click to collapse
Strange, I'm using also 1.64.08.21 and it's working like a charm... I do have another network provider (KPN, not t-mobile). Have 4 bars reception... Never had real problems with the reception too...
POLA100 (Touch cruise). Only my flash of radio succeeded in 1 time (not had to reboot before hitting the 100%). Also The Netherlands, so it doesn't seem to be country bounded.
Does it find your network? (Menu => settings => Phone (on personal tab)) then choose tab Network.
Current network: T-mobile
Network selection: Automatic
You can try Find Netwok over there, or Set network. Please also check the tab "Band", should be on Auto (both options).
My problem is when I manually check networks, I can find KPN NL and Orange NL everywhere, but not T-Mobile or Vodafone.. whilest on my wife's Vox I have 3 bars of network, on my N73 (nokia) I have 3-4 bars as well.
VERY ODD!
is it possible radio of pola100 and pola200 are different, even they share the same version number?
mavvy4ever said:
is it possible radio of pola100 and pola200 are different
Click to expand...
Click to collapse
Could be, but then again, Rroet and I are having the same devices (pola100), are living in the same country, having the same radio version (the 1.64.08.21), the only difference is that he has another provider (which I can find if I search for networks)
Rroet said:
My problem is when I manually check networks, I can find KPN NL and Orange NL everywhere, but not T-Mobile or Vodafone.. whilest on my wife's Vox I have 3 bars of network, on my N73 (nokia) I have 3-4 bars as well.
VERY ODD!
Click to expand...
Click to collapse
In June I will switch network (to Vodafone)... I hope it all keeps working... Really strange that you can't find your network anymore. If I scan for networks I see them all (also Vodafone and T-Mobile).
(Think you've allready done this) but what will happen if you give your device a hard reset, or flash Windows Mobile again to your mobile... This because I'm having the same device, can find your network and having the same radio version.
hi there!
I unfortunately got the same issue.
I got a XDA Orbit 2 from O2 Germany. Did the hardspl unlock(used the tool from olipro) after that i flashed the bepe 0.67 premium bepe rom.
Right now my orbit is disconnected most of the time, or has real bad signal strength. It would be very great if this can be fixed.
Greets
EDIT:
flashed the 1.64.08.21 got the same prob.
Got another orbit2 with everything in original delivery state. is there a possibility to "clone" the device back to original state?
I got very bad reception when update radio 1.64.08.21 . it frequenly lost connection when I got phone call , tried to downgrade and no result
I have vodafone simcard and now I must force to swich to 3g connection to make a phone call . when Iam on gsm I conldnot make any phone call at all , I am now just wait and see someone smart to show me how to correct this trouble
the phone work on my 3 sim but it is not as good as it was before
To make it complete: I have the O2 Orbit 2 (german) (POLA200) and I
have ugraded to the 1.64.08.21 without glitches (worked at first time,
did it through bootloader mode) and it is working with the same (good)
reception as it did before (phuuuh). Maybe it has something to do with
the flash problems at first time, which some users had. Could someone
sort it out? It's really goring, that even (successful) backflash to the stock
radio does not seem to fix the issue like the Poll indicates
Olioaglio
Edit: using Bepe 0.64 GER Opera with the Orbit2 ATM.
Edit2: Thought it might be a good idea to crosslink this thread to the
Polaris Radio ROMs thread to get things together.
What about the IMEI number btw?
I don't know if this is what happens by default, but my IMEI number is 2 digits longer in the software, then it is in the hardware:
example of my hardware IMEI: 123
in software it reads 12301
Does this matter in any way?
Interesting stuff... as Olioaglio said maybe there´s a relation to how it was flashed. If it was clean install or the process had to be repeated. Can anyone with this problem report back on this issue. I tried the new radio here in Spain but I went back to the stock radio as it seemed to have a better reception and battery life. I must admit I´m rather cautious about trying different radios as I fried my Hermes due to the radio and now it can´t connect at all.
I've had no problems/glitches during the flash process but I have the same reception problems as everyone else. Even using a friend's SIM with a different carrier made no difference in reception.
Hellow guyz Quickly I go through the problem i Have
I have what?
O2 xdaIIs bootloader v2.7
Radio: 1.15 & 1.12 (tested both)
Extrom Unlocked and reformatted to 128KB
I cant recive any call. Whenever i dial my number, my phone behaves as turned off and I hear the operator saying please try calling later. But oding outgoing calls works fine
Though my phone is on and in working condition. I can make calls and can send/recive sms. Wifi/bluetooth/IR no problems. Just the most wiered problem is about incomking calls. no one can contact me but i can contact them.
Also when i resume my device from suspend and quickly send an sms. It says please wait 15 minutes for the device to be ready. So i wait till i get older enough to use my phone
Any fix or any diagnostic? Looks like I am the only one with this problem
The official O2_UK_1.4_wm2k3 upgrade works fine in every aspect.
I need to enjoy the full functionality with the wm5/6 apps. I need WM upgrade especially for softmaker office..
PLEASE HELP IN THIS REGARD. DONT ASK ME AGAIN THE SAME SILLY QUESTION ABOUT READING THE WIKI. I HAVE ALREADY GONE THROUGH IT AND FOUND NOTHING
What WM6 ROM do you use? Try http://forum.xda-developers.com/showthread.php?t=428030, WM6.1 CEOS 5.2.20755 Build 20755 Aku 1.4 WWE [V2.22] works perfect!
well, I have used sun dream's v20758, then swampy's BA_CE_OS_5.2.20275_(Build_20275.1.3.3)_Basic (both didnt worked)
then WM5 from buzzdev forums(the only available WM5 download for BA at buzzdev)
i love fastness of wm2003SE but as u know, WM5/6 have much more compatibility for latest apps, thats why
still no luck
tired of reflashing
2day i will try, Helmi's WM5 (aku 3.5 i think), and xplode's WM6.1 v19293 (i just want the incoming calls). And now downloading v2.755 one Wish me luck
In WM5, sometimes the phone straight away says sim card not found. but other way it works on any other phone. In Wm6 every thing runs gud, but no incoming calls.
One more thing. I put my phone near my Sound System. When i dial my phone number, the same periodic resonant sound appeared at the speakers of sound system (like incoming call or SMS) but suddenly died down and my network operator said "please retry calling later. Your contact is not available
looks like my phone is rejecting calls
any other radio version you recommend?
I have already used v1.15 and 1.12 and still no luck. Every thing else works like charm. I am a student so I barely get money to recharge my phone's balance, mostly dependant on incomming calls. Thats why??
C'mon! Am I only one with this problem?
Tested, Helmi's aku 3.5, xplode's aku 3.5.2 kitchened roms
Tested 20755 and pv-DVH clean and green rom. None did some support to my calling thingi...........I am gonna get a new sim card and see if it is the problem with sim card.
IMHO sim card is fine since it is fully read in WM2K3 SE. Then why not in WM5/6/6.1 ?
you have very curious problem, which honestly i haven't encoutered on any BA so far...
it may be a radio problem in your case, you can try 1.13 or 1.13.10 radio they are pretty stable too
quickly provide me only radio.nbf
i see u online though. I am thinking the same. and I feel to lazy to download the huge T-Mobile Rom for v1.13. Please post the radio.nbf for radio version 1.13 or 1.13.10
still no luck. My network's sim card/network aint compatible with the new windows mobile 5/6/6.1
so no luck, keep on loossing all soft/info with battery har reset thingi on stinky WM2003SE (BTW TMUK upgrade worx like charm. Battery is alive again for 2 dayz backup yay!)