[App] Vibrate On Connect - SmartPhones Only - Windows Mobile Development and Hacking General

Hi All !
This feature has been lifted from Diamond where the phone vibrates when a call actually gets connected so that you don't have to hold the phone to your ear unnecessarily.
This small utility has the foll. features :
1. Vibrates on Incoming / Outgoing calls
2. Vibrates only when the call is actually connected
3. Also vibrates when a call disconnects.
Tested on my Moto Q GSM.
'SmartPhones only' for now ...
Requires .Net Compact Framework 2+

great, thanks!

cool and usefull!!!
thnx a lot

why not on ppc too? too bad..

Seems to only vibrate on disconnects for me. I'm on WM 6.1 on a T-Mobile Shadow.
Kermit Woodall
Managing Editor
GadgetNutz.com

kwoodall said:
Seems to only vibrate on disconnects for me. I'm on WM 6.1 on a T-Mobile Shadow.
Kermit Woodall
Managing Editor
GadgetNutz.com
Click to expand...
Click to collapse
Same here, Also have a T-Mobile Shadow 6.1

shadowmike said:
Same here, Also have a T-Mobile Shadow 6.1
Click to expand...
Click to collapse
chk .netcf version, try to upgrade.

currently testing on ppc6800 mogul....how can i access the settings?

tested on my oxygen, wm 6.1 by zfree and vibrate on disconnect but no on connect...

I have HTC Breeze and its working great for me...

Thanks. It work on my I-mate

Tested on HTC Vox (S710) with WM 6.1. Vibrates on disconnect, but not while connecting. DotNetCF version is 3.5

same on mine s310, wm6.1 (custom rom by zfree) and netCF 3.5, there is any fix to do for vibrate on connect?. vibrate on disconnect is usefull but when my call ends i don't need to be advised that the call ends...
maybe some registry edit in notifications fix our problem?

swapnilgyani said:
Tested on HTC Vox (S710) with WM 6.1. Vibrates on disconnect, but not while connecting. DotNetCF version is 3.5
Click to expand...
Click to collapse
Yes! Me too

shaileshashar said:
chk .netcf version, try to upgrade.
Click to expand...
Click to collapse
rom pre loaded with DOTNET 3.5

ytsejam_ said:
why not on ppc too? too bad..
Click to expand...
Click to collapse
If you want it on ppc, then install the opal dialer, it has this as well and also is included in many roms that have manila.

can i have some choose ?
like below
Incoming calls actually connected
Incoming calls disconnects
Outgoing calls actually connected
Outgoing calls disconnects

same on the HTC Excalibur s620 WM 6.1 rickwyatt. It only vibrates when the call ends.

works perfectly on my HTC S630. How do I make it run silently after SR? I put a shortcut in the WINDOWS/STARTUP directoy and after SR it shows on the screen and waits for my "HIDE" keypress.

Would love to have this feature on my HTC Touch - ELF.
I tried installing the cab but no luck so far...
Waiting for you new release... Thanks in advance!!!

Related

no sound by incomin calls after setup wisbar advanced 2

hi all,
i've got the problem that my jam doesn't ring the bell by incoming calls. After incoming call ends, i can see on my jam unsanswered call sign.
After unsinstall wisbar advanced 2, the ring bells by incoming calls. Can anbody help?
wis BAR!!!
so... here is the solution! REMOVE THIS PROGRAM.. this program is designed for standar pocket pc's and PDA's. Not for ppc Phone editions!!! i had the same problem with my O2 xda 2 mini
I'm not sure how relevant this is but I use the XDaIIi which I think is the same model as yours, if so you need to get the beta version of WA2. I would suggest 2.0.1.17 beta, this is because it was designed to work with this generation of PPC/phones. There are other versions available but I,m not sure of their stability. I have tried the very latest and it kept losing my today screen shortcuts SPB etc..
Anyway hope this wasn't too long a ramble. WA is an excellent piece of software highly recommended.
Pete
i use wisbar advanced 2.2017 version. so i'm wondering why the new version doesn't work. ok i will look for the 2.0.1.17 beta. i hope it will work. thx.
Re: wis BAR!!!
vaggelis said:
so... here is the solution! REMOVE THIS PROGRAM.. this program is designed for standar pocket pc's and PDA's. Not for ppc Phone editions!!! i had the same problem with my O2 xda 2 mini
Click to expand...
Click to collapse
I have it on my Imate Jam and it works fine. You have to use the latest version which can be found at Lakeridge Software Forums.
http://www.lakeridgesoftware.com/forum/viewtopic.php?t=3077
@ vaggelis:
It seems you are not up to date with Wisbar Advanced 2 so i think you shouldn't say such things, when you don't have full information, cause this is misleading for others.
same problem with 2.0.17 beta version. now i will look for the newest version in the link that xcilion gave. thx. xcilion.
heureka ,it works.
thanks xcilion
serhataga said:
heureka ,it works.
thanks xcilion
Click to expand...
Click to collapse
Glad to hear that . Your welcome.

incoming calls sound change automaticaly to vibrating

could enybody help?
after upgreading wm6 my phone sound verry offen jump to only vibrating from it selfs. When i use calendar is does it every time. Howcan i fix this problem?
Which WM6 ROM you are using?
Helmi Windows Mobile 6 Profesional R0
colonado said:
Helmi Windows Mobile 6 Profesional R0
Click to expand...
Click to collapse
I had that when I installed HTC Home version 1.x. I am using version 2.x, and this never happens anymore... maybe coincidence, maybe not.....Apart from the rom change ( from Helmi R0 to PDAViet), this is the other noticable change...
have you got HTC Home installed?
colonado said:
could enybody help?
after upgreading wm6 my phone sound verry offen jump to only vibrating from it selfs. When i use calendar is does it every time. Howcan i fix this problem?
Click to expand...
Click to collapse
Two ways to find out your problem:
1. Uninstall your HTC Home and check if problem exists. If problem gets removed, try to install latest HTC Home
2. Try another ROM

Updated: Combo HTC 3G Dialer and SmartDial (3 April 2009)

Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab.
4. Copy the white background video buttons from this link (http://forum.xda-developers.com/showpost.php?p=3486541&postcount=36) to \Windows. (New screen capture had been added).
5. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Reserved for future needs
great work look nice
congratulation for your dialer
great work, i've been searching for this for long timee.. thx dude
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
Thanks for your work.
My Phone is Dopod 810 or Trinity
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
bigsilly said:
I Like you dialer
SmartDialer work fine
I didn't have 3g connection right now, so I don't know it's work or not.
I didn't edit any registry because it's say cannot access.
so, I try to install smartdialer first and then 3G dialer.
It's have a some error on installing 3G dialer. It's say you have to remove SmartDialer version first.
I accept and again error tell me that cannot remove SmartDialer version.
Anyway, after that error it can continue install 3G dialer and finish. SR again.
Now, It's work fine and look nice.
View attachment 112863
Thanks for your work.
My Phone is Dopod 810 or Trinity
Click to expand...
Click to collapse
Glad it works for you and thanks for using it.
nir36 said:
it ALMOST works perfectly on my polaris. has a few tiny visual bugs.. including one with which i can't see the smart dialing numbers. but everything works.. in general.
great work.
Click to expand...
Click to collapse
Glad it works almost perfect for you and thanks for using it.
thorfr said:
nice work but don t work on my ks20 wm6
The dialer didn t wanted to be installed the cab doesn t work
Click to expand...
Click to collapse
Thanks for the feedback that it won't work for ks20.
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
mimmo_kallon said:
great dialer! works perfect on my hermes with WM6.1 V24 from Dvha79_ddt! i had only to install the two cab, no problems for now, i can do videocall and using smart dialing.... i'm glad to have found your dialer, is one of the best i've ever seen on my device thanks again!
Click to expand...
Click to collapse
Glad it works for you too! Thanks for the feedback.
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Francois57 said:
I tryed it but video call dont work on my Trinity with French Rom (Netdrg 3.5L)
Apprearence is OK except in the "menu" which shows some trouble. I think it's due to smartdialling.dll.0409.mui and phcanrc.dll.0409.mui that are in english (0409) and not in French (040C).
Any Idea ?
Click to expand...
Click to collapse
Sorry, not too sure but if you think it is due to the two files, and if you have the right French files, pm me and let me know. I can change the two files for you and make a new cab.
Thank you for the proposal. I need first to find the 2 files.
zard said:
Have you been getting frustrated with some of the dialers that after you install, either the screen will look funny (see first picture) or smartdial menu is not appearing?
Well, after many testing, I have managed to find the solution to make it work. The skins I used for this 3G combo dialer comes from bluemetalaxe and sakajati. Special thanks to both of them for their skins.
I only have a Kaiser, so not too sure if it will work for other phones. Do let me know if it works for other phones. Note that the new skins is only for portrait, not landscape. For landscape, it is the default from HTC. Hopefully, I can get some skins for landscape to add into the cabs.
Enjoy:
Steps to make it work:
1. SR your device.
2. Use a registry editor to delete the following registry. Note that some of the registry keys cannot be deleted the first time round, so after you have finished the list, do a SR and repeat the deleting of registry keys.
3. Do another SR and install the smartdial cab. Next install the 3G dialer cab. SR and you should have a working 3G dialer.
Registry Keys List:
HKCU:
HKCU\ControlPanel\Phone
HKCU\ControlPanel\Sounds\VTAlerting
HKLM:
HKLM\Security\Phone
HKLM\Security\ResOver
HKLM\Software\HTC\3GVTEngine
HKLM\Software\HTC\ConcurrenceMgr
HKLM\Software\HTC\HTCSDKVTCodec
HKLM\Software\HTC\Phone
HKLM\Software\HTC\PhoneCanvas
HKLM\Software\HTC\SmartDialing
HKLM\Software\Microsoft\DialParser
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\AppView
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Contacts
HKLM\Software\Microsoft\Shell\Extensions\ContextMenus\Phone
HKLM\OEM\MASD\Phone_Canvas
HKLM\OEM\MASD\VideoTelephony
HKLM\OEM\MASD\Smartdialing
Click to expand...
Click to collapse
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
nosedive said:
congratulation to your work, looks fine.
i did install your dialer in my rom - no troubles .. but now everytime i switch it on, the dialer starts itself. if i switch the phone on from standby and also when i do a softreset
any ideas? i didn't cook it in yet, but i will do so tomorrow or so..
Click to expand...
Click to collapse
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
zard said:
Did you follow the steps I mentioned to delete those registries in between SR?
I've not experienced what you had mentioned. Tried on many Kaiser roms and works all the time without the problems you highlighted.
Click to expand...
Click to collapse
yes i did ... i actually did remove the entries from my rgus from rom kitchen and did then cook it in, but still the same issue
i guess it has something to do with that reg-key HKLM\SOFTWARE\HTC\PHONE\NikeOptionOnOff .. i did set this to 0 and the phone did actually not dial after softreset - but still "auto-dial" when switching on from standby
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
kostas-k said:
I installed Smartdial and 3G dialer and everything works perfect without any problems.
The only thing that changed and didn't wanted it to, is that the icons on the taskbar have changed, even the battery icon.
Click to expand...
Click to collapse
Can you do a screen capture of the icons on the taskbar before and after you installed the dialer?
Thanks.

HTC Phone Canvas advanced settings missing!

I am using HTC PhoneCanvas 3.0 33556.0 under WM6.5 Build 21202 WWE R6.1 cooked by Xplode. every thing is working smoothly BUT there should be a tab under phone settings to control many options like:
1- add new number to contacts at end of a call
2- vibrate when call is connected
3- reject call with SMS + the option to write your custom SMS
Where is that tab????
i believe phone settings tabs are controled by phonesetting.dll and HTC phone canvas add another file called phonesettingExt.dll that should hold 2 tabs( more & advanced) but this one have (PIN2 & more)!!! so now i can control PIN2 from 2 different tabs!!!
any ideas?
80+ visits and no reply!!! Does that mean i am the only one having this issue or that every body have it and dont mind???
i dont know from ehwre do you get a cabfor it but it is incomplete
xplode said:
i dont know from ehwre do you get a cabfor it but it is incomplete
Click to expand...
Click to collapse
Hello Xplode,
i am using HTC phone canvas that you posted in "Iolite Stuff for Blueangel updated [31.01.2009] " thread!
By the way thanks for your great efforts that made Blue angel survive till now
maybe i have missed depedency for it, look in kaiser forums there is ported phonecanvas which woked fine

Fring on HD2

Hi
Do you know what Fring verstion I need to install on my HD2?
Thanks
It's not good news fo fring and HD2
Fring Support send me this letter -
"Thank you for contacting our support team.
Unfortunately, we do not support your handset type, once it is supported, we will announce it on our website."
Use Palringo, it's better anyway.
Or Nimbuzz...
But none of them is capable of VoIP calls as fring is. (...as fring would be, if they hadn´t overslept supporting WM6.5).
I got Fring to work when I disabled sense and HTC messaging
Bluecharge said:
But none of them is capable of VoIP calls as fring is. (...as fring would be, if they hadn´t overslept supporting WM6.5).
Click to expand...
Click to collapse
Nimbuzz works perfect mate..........
weepatc said:
Nimbuzz works perfect mate..........
Click to expand...
Click to collapse
Yes maybe, but don´t read their privacy statements. Its just not good for your eyes
http://www.nimbuzz.com/de/legal/privacy_statement
padlad said:
I got Fring to work when I disabled sense and HTC messaging
Click to expand...
Click to collapse
Hello,
thank you for the hint! Thats why I got Fring working one time, but did not know why
Could you please tell me where to disable HTC messaging?
Thank you!
If you want Fring (available version) on Leo you need:
1. Download fring for vga device (like Touch Dimond) from fring.com and install it
2. Disable HTC Sense (Settings - Menu- All settings - ToDay -elements - Unchek HTC Sense).
3. Tap MS button - start fring - setup your account and connect
4. Enable HTC Sense ( Settings - Menu- All settings - ToDay - Chek HTC Sense)
You need to do this steps after reset or power on your Leo
Man, I need this.. but I dont want to disable HTC Sense!!!
vlad135 said:
If you want Fring (available version) on Leo you need:
1. Download fring for vga device (like Touch Dimond) from fring.com and install it
2. Disable HTC Sense (Settings - Menu- All settings - ToDay -elements - Unchek HTC Sense).
3. Tap MS button - start fring - setup your account and connect
4. Enable HTC Sense ( Settings - Menu- All settings - ToDay - Chek HTC Sense)
You need to do this steps after reset or power on your Leo
Click to expand...
Click to collapse
_______________________________
Hi there,
This didnt work for me. Did you need to soft reset somewhere or do you have to install to phone memory?
Thanks!
weepatc said:
Nimbuzz works perfect mate..........
Click to expand...
Click to collapse
_______________________
Hi there,
Can you tell me which version you used. I tried downloading the windows mobile touchscreen version from their website but the .cab link doesnt work.
Cheers,
Fring is installed in main memory without soft reset.
hi guys
any luck with fring and hd2? Both Nimbuzz and Palringo dont give chat message received tone when on sleep mode but fring does.
I contacted Fring about the HD2 and got them to add the HD2 to the list at the following URL :
If you want to be notified when support for your handset is available, please fill up the form at:
http://reg.fring.com/app/newhandset... your Email Addres&country=Enter Your Country
Might be worth adding yourself as they may fix it quicker if they think enough HD2 users are wanting the issue resolved.
since I installed the 'Touch-It' rom, I have no problems running Fring with sense plus its installed on the memory card the only minor snag is that the bottom of the fring window is hidden behind the new windows 6.5.3 soft keys.
padlad said:
since I installed the 'Touch-It' rom, I have no problems running Fring with sense plus its installed on the memory card the only minor snag is that the bottom of the fring window is hidden behind the new windows 6.5.3 soft keys.
Click to expand...
Click to collapse
What is Touch-IT?
I have read on the forum ... ppl have no problems running fring on Official Asian rom and many custom rom....
Problem is mainly found on WWE Official Rom....
I have Miri hd2 v2.1 rom ... and fring works like a charm...
C'mon guys...
..lets put some pressure on
laxity said:
I contacted Fring about the HD2 and got them to add the HD2 to the list at the following URL :
If you want to be notified when support for your handset is available, please fill up the form at:
http://reg.fring.com/app/newhandset... your Email Addres&country=Enter Your Country
Might be worth adding yourself as they may fix it quicker if they think enough HD2 users are wanting the issue resolved.
Click to expand...
Click to collapse

Categories

Resources