Na srpskom :
Telefon mi je u bootloader modu ( plavo-zeleno-crveno-belo ) i nemogu da ga pokrenem,ne mogu da ga flesujem,updateujem,ne pomaze ni soft ni hard reset....sta da radim ? Telefon mi treba sutra !
On english :
My phone stuck in bootloader mode ( blue-green-red-white ) and now i can't start him ! I can't flash or update phone,not helping soft or hard reset ! ... what to i do ? I will need phone tomorow ! Please help me until tomorow
What about removing the battery? Let your BA sit for half an hour, then put the battery back in and try to fire it up again.
Nah...not working...I tried that
try mtty commands, look for stuck in bootloader in search
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
xplode ne pomaze to !
english :
xplode that doesn't help me !
I will bring my phone at servis...
serbian :
odnecu telefon u servis...
You really don't need - much faster and cheaper will be to fix it on your own - if BL works, you should be able to flash it.
can you enter the "flash" mode ? (grey screen with the word "serial/usb" on the top and without display backlight)
you can enter it by pressing and holding power, resett and record
Related
After user USPL hera tools , but not finish because error connection with activeSync at step 2 ... this stop at bootloader , not power on, bootloader is 1.08.0001 ... help me plz , original device rom is germany . Sorry , it bad english , i'm a asian people ... , more .. hard reset is failed ...
Sorry is 4350....
Hey guys.. I have a second Wing and the cam button is broke so i cant hold it down to enter bootloader.. Ne one have ne cool tricks or other ideas of getting into bootloader?? Please and thank you.. O one other thing.. Is there ne other way besides bootloader to check spl?? Thanks!!
hey peeps that have simular problems.. robpet2 suggested using this other program made by mestrini. it allows you to go into bootloader and a ton of other cool stuff!!! here is the link.
http://forum.xda-developers.com/showthread.php?t=329170
if you seriously need to get into bootloader, i suppose you could try incompletely flashing a rom (start it up then unplug it), which usually throws mine into bootloader.
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
try this
hi
i briked my phone a few days bak ie phone totally dead no screen action if this is ur problem try this
switch phone off take battery out hold power buttom for a few mins then put batt back holD camera button and then power on u will get tricolor screen use usb and flash new ROM or hold camera and do soft rest with stylus this will also give u try color boot screen ( also see my thread at gene upgrading it says hone dead )
goodluck
dallos said:
Hey Guyz ..
i need help here ma phone is totally dead nuthing repond in it
i tried 2 setup an old WM5 source & after da installation finished ma ppc was dead & nuthing in it respond & it dont want 2 open
sooo if any1 can help i'll be pleased :X
Click to expand...
Click to collapse
still nuthing happens ??? if u can tell me wht i should do in steps
1. Remove battery
2. Press and hold the power button for 5 seconds.
3. Replace battery
4. Press and hold the camera button & power button.
5. Poke "reset" with the stylus, you will get the tri color screen.
BTW flashing WM 5 was a bad idea . The gurus have suggested against it repeatedly.
u flashed ur SPL
what i knw from this is that u have flashed ur SPL using the WM5 ROM...try ti get tricolor screen as explained by Haree and see what SPL is showing on the screen....
after that we can see which ROM is suitable for u or how to flash new SPL on ur phone....
From the serial number it can be guessed (nor confirm) that ur is new gene...so read sticky's post of unbricking....
tell me wheher ur gene came with windows 6 preloaded?
the problem is i tried all this but i dont get to the boot screen
nuthing happened when i do this ... some ppl told me 2 try the JTAG method but i dunno how 2 do it ??
if Any1 could explain 2 me how 2 do the JTAG Method it'll be gr8 ....
ma mail is [email protected] ...
thx for ur help in advance
yesterday,i decided to flash my orange SPV M5000. I had the original WM5 on it. I made all preparations as needed,and i flashed it with a cooked WM 6.5 rom. It worked very nice the first couple of hours,then started going crazy,more and more. First windows,then the phone by itself. To describe better - i can not enter the bootloader anymore,when i press the required buttons to enter bootloader,it goes just off. It won't boot the WM at all anymore,it stands blocked at the first picture.the orange logo,and the red written lines:
R 0.00..00
G 42.37.P8
D 2.00.02 WWE
It stands like that. i can do a hard reset,but that doesn't change anything. The funniest thing is,when i press the required buttons for bootloader,the phone is off,the is nothing on screen,but i can start a rom upgrade program from the pc and it works. i can flash the device,again,but again,it stands blocked at the same spot. i did also now the bootloader upgrade to 1.01. Nothing accomplished. Please,any help for me now ?
Read wiki.
Try another 6.0 or 6.1 ROM.
I do that really and i try my best,understanding all that's written there,i tried many things,downloaded this MTTY,but it won't connect neither usb or any com port. I flashed another 6.o rom,crossbow,and the same thing is still happening. Exactly the same situation. It is stuck at the first screen and nothing is happening. Also no bootloader. Soon my head explodes,i can't understand what is going on No bootloader but still i can upgrade roms,which wont work,but again mtty no connection to do this DIC FORMAT or whatever
EDIT:
I forgot to mention, now whenever i do a hard reset,when it should write that line that i should press 0 for reset and x to exit the procedure - it says nothing - just a white screen,i still press 0 and it resets. Ending up stuck at the first orange screen
ok , let me ask you a few questions
1. Which operating system do you have (Xp or Vista)?
2. Have you disabled "allow usb connections" in Activesync?
3. Did you try to remove your SD and SIM card?
4. if you can't enter bootloader, is your PDA Recognized by your PC over Activesync or without activesync?
Ako ti treba detaljnija pomoc posalji mi msn adresu preko PM da ti pokušam objasniti
if you need detailed instructions, send me your msn (e-mail) adress over PM
damir-bosna said:
Ako ti treba detaljnija pomoc posalji mi msn adresu preko PM da ti pokušam objasniti
if you need detailed instructions, send me your msn (e-mail) adress over PM
Click to expand...
Click to collapse
Thank you my friend for your quick reply,i will soon write you in pm
wow same problem with me
my link: http://forum.xda-developers.com/showthread.php?t=529765
Hi ! Please I need your help !!! I have Elf , and after I upgrade to Onyx 5.6 and tried to install HTC MEGA Manila 2D 2.0 Base Package it's restarted and stop working I tried to Hard Reset but it doesn't hellp .
1) Hold down send/reject buttons (green/red at the front) and reset with the stylus
2) Release the stylus but keep holding the buttons till I get 'this will erase all your personal data' message
3) then press 'action' (big front button) to hard reset. But it go to start screen and after second go to black screen (or shutdown) , I can go to BOOTLOAD , but what should I do to get it work ?? Thanks !!!!
Sorry for my English !! I tried to update the rom from BOOTLOAD , after it fishish update Elf starts and go to black screen . any ideas why ?
Hi
Did you cid unlock your device before you upgraded to Onyx ?
If yes did you use Onyx for long time before installing Manilla or immediately after flashing ?
What's your IPL/SPL ?