Database Users

Answering Phone Calls

I've been reading various posts since buying my Orange M5000, but havn't seen much said about the one major problem I have.
About 50% of the time, if I attempt to answer a phone call it will cut the person off and divert the call straight to voicemail.
I'm running ROM version 1.30.90 WWE, Radio 1.03.00, ExtROM 1.30.174 WWE. Has anyone had this problem and resolved it ?

A radio ROM upgrade to 1.09 may help & it's relatively easy to do - Just search the forum Can't say I've ever encountered your particular problem though...

Installng Radio Rom 1.09
I have the same problem - nearly half of incoming phone calls are lost. I found the upgrade at http://wiki.xda-developers.com/index.php?pagename=Uni_Radio_1.09.00 . I downloaded the file to the Jasjar and tried to run it, but it didn't work.
How do I install this strange .rar-file?

Having just tried it, I can help !
Firstly you need to download a program called winrar, should be able to find it through google. It's basically like winzip and will extract the files from the .rar archive.
But, the 1.09 download I found didn't have all the files. You need to download the 1.06 version from the ftp site, extract the rar file and then replace the 1.06 radio_.nbf file with the 1.09 radio_.nbf file you have downloaded.
On you PC (with your Universal connected via USB), run the MaUpgradeUt_noID.exe to do the upgrade.
In saying that though, I've only been able to install the 1.06 so far, 1.09 won't install.

I've had problems with answering calls on my M5000, even after upgrading the radio ROM.
A couple of things that I find makes a big difference are the amount of free memory available and also changing the ring tone.
If you have some memory hungry apps chewing up the program memory it is difficult to answer the calls because the phone software is slow to load.
I have played with a variety of programs and find it best to keep a minimum of around 12-15Mb of program memory free.
Also the default orange ring tone seems to leave a delay before it starts ringing - I have changed this so that it vibrates and rings from the outset and also have been into the phone settings and changed the network services settings to divert to answering machine after 30sec, the default is 20secs.
Hope that helps.

dbgtostorage*.* ???

At me sometimes the device starts to stammer at playing music and in a root directory there are files dbgtostorage*.* which constantly grow.
At me one such problem?
In an Internet has found only it:
It is necessary to create directories radically:
DbgToStorageLog0.txt
DbgToStorageLog1.txt
DbgToStorageLog2.txt
DbgToStorageLog3.txt
DbgToStorageLog4.txt
And that for debugging and what for she in a working device with an official insertion I and have not understood it.
Tried in the register of a branch to correct or demolish dll a debugger, my animal there and then was ill, began to brake terribly at each operation. I.e. it not an output.
And has created directories, files сertainly have ceased to be created, but also the device has come to life, even began subjectively faster, and that the most important has ceased to stammer.
In general it certainly not the order with this debugger what feature of it activated also the most important who?

Which ROM version do you have? These files usually mean a debug (test) version of ROM.

ROM 1.8.411.3 Rus official.

It appears that the xpanel logger was turned on somehow.
Try doing a hard-reset or find an R2 (5.4.xxxx) ROM for your Herald - it is out already.

It is a hardware mistake!
Did all that is possible and 5.4 too has not helped. Has exchanged the device in shop, in new all is normal!

Hardware itself does not create files, this is an OS feature.

It disagree. I put different ROM, have not helped.
I think memory beaten, therefore and works a debugger.

Rather, radio works in some kind of engineering mode, and system just logs the info. There's a similar problem with P3300. I suppose this has something to do with production quality.

Did both (vvv121,ASerg) of you have solution for this kind of problem i have same problem in my xda orbit now and i haven't found any solution even googled it
please tell me what to do?

In Registry explorer (SKTools) search for key: DebugLog (HKLM\Drivers\BuiltIn\DebugLog\), rename Htc_Lib.dll (delete simbol "_"), change index from 2 to 0. Save and exit SKTools. Soft Reset.
After soft reset - delete all DbgToStorageLog.txt.
In some cooked roms this key is missing. Sorry for English poorly.

P535 custom ROMs by Lifeforce

New ROM P535 (V0.8)
+ Registry optimzed
+ File icons sorted
+ Program folder sorted for sections
+ new icons
+ integrated .Net Framework SP2
+ Add Cyberon Voice Speed Dial
+ Soft Key
+ 2 alarm sound and 5 ringtone
+ Crossbow and MMT theme
+ Add SMclose
+ Network operator codes in registry
- Removed ring tone setting from settings (useless)
http://norad.shacknet.nu/lifeforce/

i wish i had bought p535... but eten m600+ (

What's been changed in the registry?
I don't dare upgrading my rom (yet - because I dont have a backup of it) but I am not afraid of tweaking the registry
And also because my current rom has cyberon voice commander. I guess changing to speed dial would mean loss of functionality?
(and, is it possible to back up my current rom to an SD card? If that's possible then I'm not afraid of trying your rom )

Changing MiniSD file name
I'm using the Rom for Taiwan right now, since I use this phone in US therefore the stupid TomTom GPS Navigator 6 can not regonized my MiniSD card folder in Chinese due to I set the region to US. Is this Rom be able to allow me to change the MiniSD file name?
Thanks for any respond

hyl768s said:
I'm using the Rom for Taiwan right now, since I use this phone in US therefore the stupid TomTom GPS Navigator 6 can not regonized my MiniSD card folder in Chinese due to I set the region to US. Is this Rom be able to allow me to change the MiniSD file name?
Thanks for any respond
Click to expand...
Click to collapse
Think this can be done via a simple registry setting. You must rename a specific registry value, but can't reacall where's located. Try searching SD_CARD in this forum, and you'll find the answer somewehere Asukal's post.

lukacs.attila said:
New ROM P535 (V0.8)
+ Registry optimzed
+ File icons sorted
+ Program folder sorted for sections
+ new icons
+ integrated .Net Framework SP2
+ Add Cyberon Voice Speed Dial
+ Soft Key
+ 2 alarm sound and 5 ringtone
+ Crossbow and MMT theme
+ Add SMclose
+ Network operator codes in registry
- Removed ring tone setting from settings (useless)
http://norad.shacknet.nu/lifeforce/
Click to expand...
Click to collapse
Dude, I'm gonna need some help here, how the **** are you doing this: Push Off button + rec. button + nav. up + reset 5sec???????????
Go on flame me! I just can't make it work

I would love to try this, but:
I have a german device, so there is no official ROM yet.
Is there any way to replicate the actual Software to the SD?
And:
How did you do these changes?
Which Tools do you use?
Where can i find Informations about the Settings you changed?

help me! audio doesn't work after installing WaveDev.reg

Hi, i was installing the srs wow for xperia (http://forum.xda-developers.com/showthread.php?t=355913) , but installing the file in the wavedev.zip, a reg file, now i have no more sound.. Now i need urgently help, couse i have to rewrite an entire registry key...
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev
could anyone tell me al the values in this zone of registry??
i need heeeeeeeeeelp

@Trakkiggio
Your post seems incomplete to me:
Have you first installed an SRS WOW CAB file before wavedev.reg ?
If so, which version of SRS please ?
Version 1.2.10 works OK in WM6.1 IF:
a) install CAB version 1.2.10 and soft reset
b) insert wavedev.reg into Registry and soft reset
Version 1.5.10 does NOT work in WM6.1. The dll file in 1.5.10 kills the sound. I've tested this on 3 different WM6.1 devices to try and sharpen phone communication voice talk - only 1.2.10 works.
Some posts say that 1.2.10 prevents you from setting sound levels. I've not found that to be accurate if the a), b) installation sequence above is followed

ianl8888 said:
@Trakkiggio
Your post seems incomplete to me:
Have you first installed an SRS WOW CAB file before wavedev.reg ?
If so, which version of SRS please ?
Version 1.2.10 works OK in WM6.1 IF:
a) install CAB version 1.2.10 and soft reset
b) insert wavedev.reg into Registry and soft reset
Version 1.5.10 does NOT work in WM6.1. The dll file in 1.5.10 kills the sound. I've tested this on 3 different WM6.1 devices to try and sharpen phone communication voice talk - only 1.2.10 works.
Some posts say that 1.2.10 prevents you from setting sound levels. I've not found that to be accurate if the a), b) installation sequence above is followed
Click to expand...
Click to collapse
i have tried all the possilbe cabs... whitout reg file ... and maybe the 1.5 and then the reg file.. what can i do to restore the sound? you think that if i install cab 1.2.1 and then reg file should it work my sound? or the 1.5 + reg file damage the loudspeaker?

How to change the Rilphone.dll

Hi there,
I've looked for information about this topic and I get this explanation:
IF you have a patched nk.exe then make sure the rilphone from the new radio is named rilphone2.dll, copy it into the windows folder of your device, edit the registry with your favorite reg editor go to HKLM/Drivers/BiultIn/RIL edit the Dll key and change it from rilphone to rilphone2
Click to expand...
Click to collapse
After that I have downloaded the Rilphone.dll for 2.07 version, which is the radio I have installed know, and I followed the instructions but after soft reset, the phone doesn't work.
Could someone explain, step by step, how I can change the rilphone?
Thanks in advantage.

I dont know where u got that info but:
*-How can I install a new rilphone.dll to my already installed ROM?
* You can make a CAB or use Resco Explorer... However, it has to be put in \Windows\ directory (and, of course, you need to reboot after the installation!)
from here ... end of first post
http://forum.xda-developers.com/showthread.php?t=611787

Yes, I found this information too but I don't know how to make a cab and the only way I have to change the rilphone it is by using the Resco software and this is the way I followed with the commented result.

The rilphone.dlls are operator specific so first of all you have to know that the one that you are wishing to use is indeed the one that will work!!!
After you flash a chosen radio, if it works then there really is no need to tamper with it any further.
If it doesn't then it could well be the rilphone file that has upset , or that could improve things, so be careful.
A US rilphone, (and who knows where they come from?) may have no beneficial effect on a UK radio and vice versa!
Try the radios with whatever you have already (a stock radio could improve with an "in the wild" rilphone variant), but, there's no guarantee.
Remember rilphone files are not ROM or radio dependant, they are operator dependant so logic dictates that a rilphone extracted from a specific operator ROM should "enable" that operators access protocols and could be the one to use with any later radio flash.
Horses for courses!

Thanks pa49.