Related
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
NYKUNLV said:
Hi all, I have a frustrating problem with my Cingular 8525. I just formatted the comp and installed Vista Ultimate on it fresh. I downloaded WMDC but I can't get it to recognize my phone for the life of me. It keeps saying "connecting" forever and never does. I have done all sorts of installs, re-installs, hard resets, but I can't get it to detect at all! Can anyone help? Thanks in advance.
Click to expand...
Click to collapse
first try to install the driver of your device.. go to device manager and look for unknown device at OTHERS..
good night and good luck
The driver is installed... it displays HTC USB Sync. I am getting frustrated . Stupid Vista.
USE the search function dude
Hermes vista config guide
Also make sure you dont have any firewalls active. I have had issues syncing my phone with my computer when using AVG's firewall. I simply disabled the firewall and it fixed my problems.
mrvanx said:
USE the search function dude
Hermes vista config guide
Click to expand...
Click to collapse
I already tried that guide... still not working. Ill try disabling the firewall
go to settings->connections->usb to pc and then check Enable Advanced network functionality.
If that doesn't work remove/uninstall htc sync device, unplug device and plug in device to reinstall the htc sync device after you have set the usb to pc connection settings.
Also try using a different USB cable and plugging it into a different port, you never know, it could just be something defective.
But I'm putting my money on the firewall
I had a problem connecting my 8525 to my Vista machine. It would say connecting but it would never finish 'connecting'. It took a while but finally I figured out what was causing it. It was the 'recording' .wav files in the notes directory that were causing the issue. If you have any .wav files in your notes directory I'd suggest moving them to say your SD card or deleting them. That fixed the 'connecting' problem for me and since I did that it's been syncronizing fine ever since.
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
NYKUNLV said:
I tried everything listed in here at once.... something worked I should have done each step by step to pinpoint what exactly... but its working now. Thanks everyone!
Click to expand...
Click to collapse
Same for me. I had a load of problems getting the Mobile Device Center working with my HTC TyTN. First I was unable to even install the driver when I first connected my device. The "add new hardware" wizard always tried to connect to Windows Update and install an updated driver which then failed. The solution was to let it fail and manually install an older driver from the list using the icon in Device Manager. After that I could start Windows Update and download the latest update.
Then I had the same problems as you describe. When I started WMDC it just hung while displaying "Connecting". Looking in the task manager I noticed that the wmdc.exe process was consuming more and more memory, up until something like 250 MB, after which WMDC just showed "Error". Finally I got it to work. It is hard to pinpoint exactly what I did to fix it. I know that the "advanced network features" under USB in connection settings on the TyTN need to be ticked and the device showing as a Windows Mobile Device instead of HTC USB Sync.
Initially I did a hard reset of the TyTN. Further, I manually unistalled and reinstalled the driver in Device Manager a couple of times. I tried to reboot both the computer and the TyTN several times. Also, I did restart the "Windows Mobile-based device connectivity" service after plugging in the cable. Finally it just recognized my device and I could setup the partnership. Now I can sync over bluetooth too and skip the cable.
HTC phone support was not very helpful with this problem. "We will call you back". Yeah right.
Mobile cofiguration:
Dopod 838 Pro
LVSW 4/17/07 WM6
Hard SPL
PC configuration:
Windows Vista Business Edition
I encountered the same problem. Currently able to sync back by hard resetting my device. The USB to PC connection on settings does not appear to affect the sync problem.
I suspect that the problem arise when I originally sync with an XP machine.
What worked for me was to enable the advanced usb setting on the phone as mentioned...then while the phone is still plugged in, I removed everything associated with the phone from device manager on the pc. Once that was done, I unplugged the cable, waited a few seconds, and plugged it back in (with the advanced usb settings still checked.) Worked like a charm with WMDC.
I had problems with all sorts of "connectivity" in Vista, including connecting up my Trinity, and setting up my xbox 360 as a media extender.
As soon as I uninstalled MS One Care it all started working.
I just got a new laptop running Vista and I am just having tremendous issue trying to sync my Sprint Mogul (HTC Titan) to Windows Mobile Device Center (WMDC --> ActiveSync replacement in Vista) and Outlook 2007.
Basically, when I connect my Mogul via USB (NO Bluetooth), the device shows that it is connected for syncing to the laptop. But WMDC shows "connecting..." all the time and just not syncing. The only way to do this is to reboot the laptop.
The same phone sync just find to a Windows XP machine. I have tried the following but to NO AVAIL:
- Disable "Enhanced network USB function" in the device (Start -> Settings -> Connection -> USB to PC
- Remove all background services in the laptop, like Anti Virus, Vista Sidebar, Spy Sweeper.
BTW, my Mogul is running WM6, no custom ROM or anything.
Does anyone have the same issue and can provide me with the solution? It seems Vista and WMDC just breaks everything.
what does sync center say?? I'd try going into WMDC and unchecking all the sync content and seeing if it will connect...chances are theres something that it's trying to sync and it won't....I've also ran into a problem recently where outlook must be open for it to sync properly...you can try that.
There are 2 WMDC applications:
WMDC (Start -> Programs): just say connecting
Sync Center (on Taskbar): when I double click, under "View Sync Partnership", it just say "Disconnected"
I always run Outlook 2007 before Sync, so I suspect something else in Vista causing it.
I have tried a fresh Vista install, and it sometimes work, sometimes doesn't.
What I found out is like this:
1) Start Vista and Outlook
2) Connect device to WMDC - WORK
3) Disconnect, but Outlook remain
4) Reconnect - DOESN'T WORK
lanwarrior said:
There are 2 WMDC applications:
WMDC (Start -> Programs): just say connecting
Sync Center (on Taskbar): when I double click, under "View Sync Partnership", it just say "Disconnected"
I always run Outlook 2007 before Sync, so I suspect something else in Vista causing it.
I have tried a fresh Vista install, and it sometimes work, sometimes doesn't.
What I found out is like this:
1) Start Vista and Outlook
2) Connect device to WMDC - WORK
3) Disconnect, but Outlook remain
4) Reconnect - DOESN'T WORK
Click to expand...
Click to collapse
I have Vista and Outlook 2007 and never had a problem with syncing. I just tried the 4 steps you outlined and it worked when I first connected my Mogul and also when I reconnected the Mogul. What version of WMDC are you running? I have 6.1.6965.
I usually don't run Outlook before doing a sync. I've never had a problem with this either way.
2 Things
I know you said that it shows something about being connected, but have you gone to My Computer and tried to access your device? This will help determine if its just not being recognized by the system properly, or if the sync software is hosed.
Additionally, try searching here or on ppcgeeks.com for the "update vista drivers". I didn't need them - but apparently some folks did. Depending on how long you've had Vista, and/or whether or not you've done M$ Windows updates, I'm thinking your driver could be hosed.
I too have Vista - and I can sync just fine as well as transfer files back & forth through My Computer. I also sync the same device up with an additional computer (how sweet is that? I wish iTunes would freakin' work like that one of these days!) that's on XP.
Would love to help more if need be. I'll be around Saturday if you want to PM and try going over your settings vs mine or something.
Sometimes I have to connect my mogul up to 6 times before it connects properly to my Vista laptop. I now always open device manager before connecting the mogul. It doesn't connect properly until the Microsoft Windows Mobile Remote Adapter driver installs correctly under Network Adapters AND the pocketpc driver installs correctly under portable devices. And it is very wierd because sometimes it works on the first try, and other times like I said b4 it can take up to 6 tries before it works right. I have looked up the error codes that it generates in the Event logs and there are a lot of people who are having the exact same issue, so I chalk it up to a Vista problem and hopefully it will get better after SP1 is released.
mem_reddog said:
Sometimes I have to connect my mogul up to 6 times before it connects properly to my Vista laptop. I now always open device manager before connecting the mogul. It doesn't connect properly until the Microsoft Windows Mobile Remote Adapter driver installs correctly under Network Adapters AND the pocketpc driver installs correctly under portable devices. And it is very wierd because sometimes it works on the first try, and other times like I said b4 it can take up to 6 tries before it works right. I have looked up the error codes that it generates in the Event logs and there are a lot of people who are having the exact same issue, so I chalk it up to a Vista problem and hopefully it will get better after SP1 is released.
Click to expand...
Click to collapse
How did you get this MS Windows Mobile Remote Adapter and Driver? Windows Update or manual download link?
I don't know how to set my ppc-6800 (same as Mogul) to sync my contacts and e-mails with outlook 2007. When i connect it to my PC, it appears in my computer and i can browse in and transfer files in both ways. But still no contacts or e-mail sync...i would like to get help.
skny said:
I know you said that it shows something about being connected, but have you gone to My Computer and tried to access your device? This will help determine if its just not being recognized by the system properly, or if the sync software is hosed.
Additionally, try searching here or on ppcgeeks.com for the "update vista drivers". I didn't need them - but apparently some folks did. Depending on how long you've had Vista, and/or whether or not you've done M$ Windows updates, I'm thinking your driver could be hosed.
I too have Vista - and I can sync just fine as well as transfer files back & forth through My Computer. I also sync the same device up with an additional computer (how sweet is that? I wish iTunes would freakin' work like that one of these days!) that's on XP.
Would love to help more if need be. I'll be around Saturday if you want to PM and try going over your settings vs mine or something.
Click to expand...
Click to collapse
I agree with the problem being a driver issue, mine searches for updates every week. I've had a vista machine since october last year and havent had any problems at all with syncing(usb or BT) or changing roms. As a suggestion when a first got my 6800 in July and switched to the 2.17 rom i had to upgrade to a newer version of WMDC, check your version and the most up to date one on HTC's website. Hope that helps.
Hi all,
I am bringing this thread back because now I have another issue with Mogul syncing to Vista with Outlook 2007. This is actually for my friend but the issue is simply puzzling and I hope anyone have insight on this.
My friend have another laptop and a Mogul and when he connect the device to the laptop via USB, Vista Mobility Device Center (MDC) only recognize it as a MEDIA PLAYER, not as a PDA.
I tried the following:
- Disable/Enable USB Advanced Network functionality (System -> Settings -> Connections)
- Hard reset the Mogul
- Connect the devices and run Windows Update (to check if there is a driver issue)
When I connect that same Mogul to a Windows XP, it sync just fine.
What do you guys think?
Guys,
Just a quick update on the issue whereby I cannot sync the Mogul to Vista: the driver updates did the trick! After installing the driver update, syncing works just fine! I wonder why M$ didn't include this update under Windows Update.
Thanks for the help all!
lanwarrior said:
Guys,
Just a quick update on the issue whereby I cannot sync the Mogul to Vista: the driver updates did the trick! After installing the driver update, syncing works just fine! I wonder why M$ didn't include this update under Windows Update.
Thanks for the help all!
Click to expand...
Click to collapse
Please, where did you get the driver updates. Was it a driver on the phone, or for vista.
I am having similar probs, except it appears to sync, but deletes all contacts (inclunding sim!) from my touch dual.
It's shown in the thread above. The driver is available in PPCGeeks. I forgot which thread there, though.
Solution
lanwarrior said:
I just got a new laptop running Vista and I am just having tremendous issue trying to sync my Sprint Mogul (HTC Titan) to Windows Mobile Device Center (WMDC --> ActiveSync replacement in Vista) and Outlook 2007.
Basically, when I connect my Mogul via USB (NO Bluetooth), the device shows that it is connected for syncing to the laptop. But WMDC shows "connecting..." all the time and just not syncing. The only way to do this is to reboot the laptop.
The same phone sync just find to a Windows XP machine. I have tried the following but to NO AVAIL:
- Disable "Enhanced network USB function" in the device (Start -> Settings -> Connection -> USB to PC
- Remove all background services in the laptop, like Anti Virus, Vista Sidebar, Spy Sweeper.
BTW, my Mogul is running WM6, no custom ROM or anything.
Does anyone have the same issue and can provide me with the solution? It seems Vista and WMDC just breaks everything.
Click to expand...
Click to collapse
I found this by accident.
Click on Start > Settings > Connections > USB to PC and *uncheck* "enable Advanced Network Functionality."
Problem solved.
dclong said:
I found this by accident.
Click on Start > Settings > Connections > USB to PC and *uncheck* "enable Advanced Network Functionality."
Problem solved.
Click to expand...
Click to collapse
YUp, I tried that before, but it doesn't work. I have to update the driver to WMDC 6.1.
BTW, to everyone: driver is available here --> http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
lanwarrior said:
YUp, I tried that before, but it doesn't work. I have to update the driver to WMDC 6.1.
BTW, to everyone: driver is available here --> http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
Click to expand...
Click to collapse
I'm sorry -- was not aware of that. I have automatic updates set up so this question of driver update/renewal never came up for me.
Does this update work for anyone?
My Mogul is hanging on my laptops side...it say "Connecting to Unidentified Device".
And then it just stays there for ever....
Booya said:
Does this update work for anyone?
My Mogul is hanging on my laptops side...it say "Connecting to Unidentified Device".
And then it just stays there for ever....
Click to expand...
Click to collapse
The only way I could get around it is to disconnect my device, remove the device from WMDC - and - remove the PC connection in ActiveSync on the device and start ALL over again.
Also, I found that when you have a lot of data (like I do) to start syncing only piecemeal, i.e. do the first sync with the defaul settings first, then add folders, then add emails, etc.
IMHO - WMDC is so inadequate.
Oh well, tried all of these and still no joy
This works for me on my Sprint Mogul a/k/a HTC PPC-6800
timbouk said:
Oh well, tried all of these and still no joy
Click to expand...
Click to collapse
Disable the Windows Mobile DNS cache. This requires a registry
modification. Windows Mobile does not include a registry editor, but
free third-party editors are available (such as one from www.phm.lu).
Change the value of:
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\InternetSettings\
DnsCacheEnable to 0
If DnsCacheEnable does not exist, create it as a DWORD value.
A soft reset is necessary for the change to take effect.
==============
After that I'm out of ideas ...
I have search everything here and on HTC and on Verizon and here is where I am stuck. Using DCD 3.2.0 (but had same problem with 3.1.6) and latest Radio Rom. It seems to connect just fine to a Windows XP activesync 4.5 computer but will not connect to the Mobile Device Center on Vista (32bit).
Looking into the device manager I do see the Mobile Devices/HTC USB Sync driver is active but I do not see the Portable Devices/XV 6800 driver at all.
I do have the "Enable Advanced Network Functioinality" unchecked. I have uninstalled all the drivers and Mobile Sync software and rebooted everything. I even have tried the USB splitter. It seems to half recognize the phone in Vista but the other half is the Mobile Sync part. I do get an error on the phone that says "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer." This is sooooo frustrating as it worked one time on Vista, I think either DCD 3.0.x or maybe earlier and now it only works on XP.
What am I missing here??????
I have search everything here and on HTC and on Verizon and here is where I am stuck. Using DCD 3.2.0 (but had same problem with 3.1.6) and latest Radio Rom. It seems to connect just fine to a Windows XP activesync 4.5 computer but will not connect to the Mobile Device Center on Vista (32bit).
Looking into the device manager I do see the Mobile Devices/HTC USB Sync driver is active but I do not see the Portable Devices/XV 6800 driver at all.
I do have the "Enable Advanced Network Functioinality" unchecked. I have uninstalled all the drivers and Mobile Sync software and rebooted everything. I even have tried the USB splitter. It seems to half recognize the phone in Vista but the other half is the Mobile Sync part. I do get an error on the phone that says "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer." This is sooooo frustrating as it worked one time on Vista, I think either DCD 3.0.x or maybe earlier and now it only works on XP.
What am I missing here??????
Click to expand...
Click to collapse
Have you tried a different usb port on the PC, or a different PC running Vista 32 bit? Mine works fine in Vista & XP.
gc14 said:
Have you tried a different usb port on the PC, or a different PC running Vista 32 bit? Mine works fine in Vista & XP.
Click to expand...
Click to collapse
I have tried different USB ports and no Joy. It looks like it recognizes it as the HTC USB Sync driver shows up and it makes a noise that it found a USB device. I don't have another Vista machine but maybe a 64bit windows 2003 server would be the same. Probably not. It did work once a few DCD Roms ago but not since.
Random Disconnects
I am having a similar problem. Evern since moving to DCD 3.12, I have had a similar problem. I can manage to get connected sometimes but it will randomly disconnect.
For a while I switched to No2Chem and didnt experience the problem.
bishop0114 said:
I am having a similar problem. Evern since moving to DCD 3.12, I have had a similar problem. I can manage to get connected sometimes but it will randomly disconnect.
For a while I switched to No2Chem and didnt experience the problem.
Click to expand...
Click to collapse
Can you post what devices show up when you are connected?
When I went from 3.1.4 to 3.2.0 I started having issues with Sync Center (Vista Ultimate 32-bit) as well. If I restart the PC it works fine for a while, but then suddenly you hear the USB device disconnect noise and thats all she wrote.
The device's charge LED is on, but it doesn't show up in vista anymore unless you restart the PC.
With 3.1.4 I never had this issue.
I wrote up an ActiveSync/mobile Device Manager Troubleshooting Guide in the Wiki, did you try all of those steps?
jambrose said:
I have search everything here and on HTC and on Verizon and here is where I am stuck. Using DCD 3.2.0 (but had same problem with 3.1.6) and latest Radio Rom. It seems to connect just fine to a Windows XP activesync 4.5 computer but will not connect to the Mobile Device Center on Vista (32bit).
Looking into the device manager I do see the Mobile Devices/HTC USB Sync driver is active but I do not see the Portable Devices/XV 6800 driver at all.
I do have the "Enable Advanced Network Functioinality" unchecked. I have uninstalled all the drivers and Mobile Sync software and rebooted everything. I even have tried the USB splitter. It seems to half recognize the phone in Vista but the other half is the Mobile Sync part. I do get an error on the phone that says "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer." This is sooooo frustrating as it worked one time on Vista, I think either DCD 3.0.x or maybe earlier and now it only works on XP.
What am I missing here??????
Click to expand...
Click to collapse
Go under settings/connections/USB to PC and uncheck the Enable advanced network functionality and see if that works for you on Vista.
also make sure you check your network connections, and make sure the Remote NDIS Connection (This is your Pocket PC, Smartphone) And have the IP Configuration set to automatic, as i forgot to put it back after using it as a modem for my laptop. This also prevents active sync from working.
Just a thought, as i had a similar problem, and my fix was reverting back IP settings to Automatic. Try this if you haven't
ranmasaotome510 said:
also make sure you check your network connections, and make sure the Remote NDIS Connection (This is your Pocket PC, Smartphone) And have the IP Configuration set to automatic, as i forgot to put it back after using it as a modem for my laptop. This also prevents active sync from working.
Just a thought, as i had a similar problem, and my fix was reverting back IP settings to Automatic. Try this if you haven't
Click to expand...
Click to collapse
DV8 said:
Go under settings/connections/USB to PC and uncheck the Enable advanced network functionality and see if that works for you on Vista.
Click to expand...
Click to collapse
DV8, I have tried both on and off. It seems that off will act like the PPC with it on it acts like the remote NDIS network adapter like if you want to teather it.
ranmasaotome510, If I don't select the advanced network functioinality I never get the Remote NDIS Connection to change anything. All I get is the HTC USB Sync driver under the Mobile Devices and that is it. If I check the advanced network functionality I only get the Microsoft Widnows Mobile Remote Adapter driver and not the HTC USB sync driver. Either way WESCOMM doesn't find the device.
I used the view hidden devices and removed everything I could find but I never can find this driver: Portable Devices\PocketPC to uninstall it. I have also uninstalled WMDC a couple of times and have downloaded and installed the latest. This works fine on XP with out fail. I am also using office 2007 but this did work on this Vista machine with an earlier ROM.
No clue if this is related, but I found two copies of Teredo Tunneling Pseudo-Interface in device manager. One was operational and the other was not. I removed the one with the yellow bang on it and plugged in my phone. Immediately Sync Center saw it and allowed me to create a connection with the phone.
Dumb luck? Maybe.
scorp508 said:
No clue if this is related, but I found two copies of Teredo Tunneling Pseudo-Interface in device manager. One was operational and the other was not. I removed the one with the yellow bang on it and plugged in my phone. Immediately Sync Center saw it and allowed me to create a connection with the phone.
Dumb luck? Maybe.
Click to expand...
Click to collapse
Thanks for the try, I don't have that driver installed. I had IPv6 not checked and thought maybe that was it but no joy. Any other ideas out there?
jambrose said:
Thanks for the try, I don't have that driver installed. I had IPv6 not checked and thought maybe that was it but no joy. Any other ideas out there?
Click to expand...
Click to collapse
This is just a shot in the dark, but have you tried any of the wireless sync options - either bluetooth or IR? I know that they aren't quite as fast or reliable, but it may be worth a shot.
Ivan
btonetbone said:
This is just a shot in the dark, but have you tried any of the wireless sync options - either bluetooth or IR? I know that they aren't quite as fast or reliable, but it may be worth a shot.
Ivan
Click to expand...
Click to collapse
Bluetooth is my next try. I am thinking about this USB bluetooth adapter, any suggestions? http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=3399853&CatId=909
scorp508 said:
No clue if this is related, but I found two copies of Teredo Tunneling Pseudo-Interface in device manager. One was operational and the other was not. I removed the one with the yellow bang on it and plugged in my phone. Immediately Sync Center saw it and allowed me to create a connection with the phone.
Dumb luck? Maybe.
Click to expand...
Click to collapse
Hello all together,
some days ago I have bought a new S710 Vox phone and had no luck with synchronizing it with my Vista PC. Same problem as jambrose.
Then I read the posting about Teredo Tunneling-Adapter, deleted it from my system, rebooted the PC and surprise, the connection to my Vox works fine. Thank you!
Greetings to all
Johnweb_62
Johnweb_62 said:
Hello all together,
some days ago I have bought a new S710 Vox phone and had no luck with synchronizing it with my Vista PC. Same problem as jambrose.
Then I read the posting about Teredo Tunneling-Adapter, deleted it from my system, rebooted the PC and surprise, the connection to my Vox works fine. Thank you!
Greetings to all
Johnweb_62
Click to expand...
Click to collapse
So where did you find the adapter at? In the device manager under network?
Anyone?
jambrose said:
So where did you find the adapter at? In the device manager under network?
Anyone?
Click to expand...
Click to collapse
Yes, I found it in the Device Manager under Network.
But, this works only few days. My PC normaly runs all around the day und so it works until yesterday when I had to reboot my system because I had installed a software update. After this reboot the S710 has the same problem again. Even the Teredo Tunneling Adapter is still not there.
I am , any other idea?
Johnweb_62
DV8 said:
Go under settings/connections/USB to PC and uncheck the Enable advanced network functionality and see if that works for you on Vista.
Click to expand...
Click to collapse
Worked for me, Thanks!
HELP!
HELP!!!!!!!!!!!!!!!!!
I cannot get this resolved to save my arse!
I have tried EVERYTHING...just spent 3 hours looking up stuff, and re-reading to try and find something.
What the problem is:
My Verizon XV6800 connects to my Vista laptop, but does not OPEN up WMDC. If I have "Advanced Function" unchecked, then my laptop finds my ppc when connected, but does not open up WMDC. On my phone, a little connection icon goes in the bottom tray. Other times, I get the "you do not have active sync 4.5 installed" error.
What I've tried:
Uninstalling/reinstalled
net localgroup add administrators etc.
I am at a loss.
I just want to sync my Mogul with my Vista Laptop, so that I can install apps and sync email! UGH!
Any help would be greatly appreciated.
Do you have a firewall running on your laptop? I had trouble connecting also since I have BitDefender running. I had to open up some ports to get it working. Also, prior to connecting the USB, I would exit the ActiveSync process. The connection will start a new instance of it automatically.
Windows (XP & 7 X86) does not recognize my HTC P3600 (Bootloader and WM5Storage too), I do not know what's going on, after connect to pc - the battery charging (orange light), through bluetooth connect normally to ActiveSync, WMDC.
P.S. I did Hard-Reset
Thanks.
try this:
go to Start\Settings\System\USB to PC
un-check the option "Enable advanced network functionality"
hope it might help
or try to delete htc_3600 in the devices list (control panel) and sync it again
Code:
try this:
go to Start\Settings\System\USB to PC
un-check the option "Enable advanced network functionality"
Done - don't work. :/
Code:
delete htc_3600 in the devices list (control panel) and sync it again
i haven't got any htc/ppc device in my devices list... :/
in my Vista it's "mobile devices"->"Pocket_PC"
try this:
1. go to "Windows Mobile Device Center"
2. click "Connection settings"
3. put a tick on "Allow USB connections" if it's not
It also did not help, I do not know what's going on - it can hardware? But it's charging battery... :/
Please, anyone? :/
Hi,
Did you solve this problem? My wifes Diamond connects well with Win 7 RC, but my P3600 doesn't.
Martin
Solution for sync problem on W7
MartinTrinity said:
Hi,
Did you solve this problem? My wifes Diamond connects well with Win 7 RC, but my P3600 doesn't.
Martin
Click to expand...
Click to collapse
1. You must remove every partnerships with all the mobile devices.
2. Completely uninstall Windows Mobile Device Center.
3. Reboot W7.
4. Install the most recent version from Microsoft download site.
5. Reboot W7 (Not necessary but preferable).
6. Connect Mobile Device and wait for it to setup completely.
That should solve.
Thanks for the reply, I did all that and more....
The Mobile Centre did not install very well, but, just one hour after I asked you (and a boot because of a Windows update), the phone was recognized and everything synced fine.
Go figure!
Hello,
This is maybe a late response but my p3600 doesn`t sync with W7 WMDC.
Everthing is going good till the sync.The arrows are turning but nothing happens after that.
Someone a solution??
Steinie
p3600 sync problem W7
Hello,
This is maybe a late response but my p3600 doesn`t sync with W7 WMDC.
Everthing is going good till the sync.The arrows are turning but nothing happens after that.
Someone a solution??
Steinie
Hi
Im having a problem with activesync on windows xp. My HTC touch HD will sync with vista at work, but just will not sync on my home pc.
Ive read various threads and some say there is a problem with service pack 3 and activesync 4.5 so I installed activesync 4.2 and 4.1 but I get the same, the computer either reboots when I attach the phone or just will not find the phone. The pc does make a sound as if the phone is attached but activesync doesn’t find the phone.
I noticed in device manager that there is windows mobile device #2 with a yellow exclamation mark and the problem is windows cant load the driver, Ive tried rollback driver, uninstall the item but still no luck.
Im running NRG’s rom but it cant be the rom at fault as the phone syncs with vista.
I will try and take off service pack 3 and see how I get on but if you have any advice it would be welcome.
Thanks
Zeb
No, it's not that.
I have ActiveSync 4.5 on Windows XP SP3 here and my two HTC phones connect and sync with no problem. I have even loaded new ROMs on them from here.
Same thing on my other computer with Windows Vista and Windows 7 with WMDC. No problem connecting with my two phones on any ROM.
Try to clean your USB device list, I had to do this on some computers when a USB device is not correctly detected.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB
Delete all keys starting by Vid
I have discovered that Active Sync can't usefully sync with more than 1 or 2 pcs - I too use XP and AS4.2 at home (on a laptop) to sync contacts/diary/tasks - and I hook up to my Vista work PC JUST for power (no syncing whatsoever).
I recently tried to Sync my contacts over to a new laptop, and couldn't do it - I had to copy the Outlook.pst files over and then remove the AS profiles on the phone - very irritating.
Have you tried disabling "faster data synchronization" under settings->connections->USB to PC?
I had the same problem once and removing the tick resolved it...
(Remember to disconnect and reconnect the device after changing this setting.)
Thanks guys for your advice on this.
I formatted my pc and installed windows xp again. I installed my firewall etc and surprise surprise activesync worked perfectly.
I installed service pack 3 and low and behold activesync would not play ball.
So Ive taken off service pack 3. Is there anything critical in service pack with regard to updates?
Thanks Bill Gates for testing your updates.
Working here with SP3 and no 3rd party firewall.
Any 3rd party firewall will block the activesync communication as it's done through IP.
The computer uses 169.254.2.2 and the PDA uses 169.254.2.1
Configure your firewall to allow that traffic